Good 50+ ohm in ear recommendations? - LG V20 Questions & Answers

I tried Klipsch X12i which were 50 ohm but that wouldnt engage the high impedance mode. Does anyone have a recommendation for in ear that are over 50 ohm?

Related

Plantronics Discovery 925

OMFG people I just got mine and I'm in love. I just hope it works.
Right now it is charging. It fits wonderfully, it comes with 3 ear tips in small medium and large.
What I like most about it besides the fit is the little charging case. You can charge the headset....and charge the case....so you can charge the headset with the case without the cord...PEOPLE. The charging case has its own battery. HOT DAYUM
Well and you want know another reason why I like it....
Why? Well any of you who have a Jawbone know why. The case will protect the speaker assembly from BREAKING OFF!
OK what's in the box. You get the headset, USB charger, AC charger and charging case along with the manual and the three ear tips.
Again, it feels great, worth the dough. Now I'll put it through it's paces on calls tomorrow to let you know how it sounds and how my callers say it sounds. But I just had to post about the fit, charging case and quality.
Plantronics 925 Performance
I've been on a search for months to find a bluetooth headset that will deliver good sound to the user when paired with the Tilt.
I've tried many headsets including the orginal and the new Jawbones and others.
The best headsets that I have found so far are the Plantronics 655 and the new 925. I have also, to a lesser degree, found the Motorola H12 to be acceptable.
Both the Plantronics are comfortable to wear, deliver on the user end sound quality approaching that of what most other phones deliver and the people on the receiving end can hardly tell that I'm using a headset.
The Motorola H12 is still better than most headsets that I've tried but I still give the edge to Plantronics for both noise cancellation and richness in sound quality on the user end.
Between the 655 and the 925, out of the box, I would give the edge to the925. The 655 delivers equally good (if not slightly better sound) on both ends but the 925 fits better in the ear and the button ergonomics are better. (Note: The 655, for me, when used with the provided ear hook and a little superglue to keep the ear gel from coming off works great as well.)

which is best usb splitter for vogue to use BOSE around ear headphones??

Hi guys I want to use BOSE AROUND EAR/NOISE CANCELLING HEADPHONES on my vogue so i want to buy a usb splitter for same.
also some where i heard that using usb splitter decreaseds the sound quality of headphones
the BOSE uses 3.5MM jack
link to bose:http://www.boseindia.com/retail/bose-product-detail.aspx?Prd_Id=17&Cat_Id=647&Nav_Id=647
link to a htc splitter that i think is the best i saw it's also of original htc
link:http://cgi.ebay.com/3.5mm-USB-Adapt...temQQimsxZ20091223?IMSfp=TL091223214003r14433
so please guys help me coz tghe bose headphones are of around 170$ so i dont wanna waste my money
also is the same headphones also compaitable with BLACKBERRY STORM
i will also use the same headphones on blackberry also
thanks guys
hope a quick reply
patelaquib said:
Hi guys I want to use BOSE AROUND EAR/NOISE CANCELLING HEADPHONES on my vogue so i want to buy a usb splitter for same.
also some where i heard that using usb splitter decreaseds the sound quality of headphones
the BOSE uses 3.5MM jack
link to bose:http://www.boseindia.com/retail/bose-product-detail.aspx?Prd_Id=17&Cat_Id=647&Nav_Id=647
link to a htc splitter that i think is the best i saw it's also of original htc
link:http://cgi.ebay.com/3.5mm-USB-Adapt...temQQimsxZ20091223?IMSfp=TL091223214003r14433
so please guys help me coz tghe bose headphones are of around 170$ so i dont wanna waste my money
also is the same headphones also compaitable with BLACKBERRY STORM
i will also use the same headphones on blackberry also
thanks guys
hope a quick reply
Click to expand...
Click to collapse
As an audiophile I can't help but giggle a bit, I don't think anything you can buy will really make the vogue sound all that great as the amount of noise to signal produced out of it is way too much - if you are thinking about buying bose headphones I HIGHLY recommend against as well, for $170 a pair of grado labs headphones or high-end sennheiser headphones will sound much much much better and you won't be giving your money to "blowse"
Honestly, your best bet is finding the original splitter that came with the phone and getting the absolute lowest impendence headphones you can - it will produce the absolute best sound you can get out of the phone (it's conditional though, so if you take those very same headphones and put them to another application like a home reciever it'll sound bad there!)
If any of this is confusing, let me know by PM I will gladly help out!
reply!!!!
Thanks for your reply.....
The splitter recevied from supplier doesnot match with bose jack.....so i have to have new splitter for matching bose jack(3.5mm) to enjoy sound....
Company supplied splitter has (1) charger jack & (2) 11 Pin mini USB for original HTC headsets.
So i wish considering above limitations, to enjoy good sound quality, i understood that BOSE is best matched with NOKIA N91......So i have planned to get one for me too provided i am able to fetch original HTC SPLITTER matching with subject BOSE headphones thread.........
Link provided in thread is of orignal HTC Splitter which I think released to use with HTC DIAMOND, Please confirm me that will it work on VOGUE also...if I buy one for me ???????????
lol, i've made my own and it works pretty darn fine. a wire is a wire. i really don't think its going to make a difference. (is pure gold wires really going to make a difference from copper?) but the quality of the magnet and the coils will make a difference no doubt.
but since my creation look ghetto (electric tape ) im planning on buying another.
mikurej95 said:
lol, i've made my own and it works pretty darn fine. a wire is a wire. i really don't think its going to make a difference. (is pure gold wires really going to make a difference from copper?) but the quality of the magnet and the coils will make a difference no doubt.
but since my creation look ghetto (electric tape ) im planning on buying another.
Click to expand...
Click to collapse
Thread moved to General.
Difference between gold wires and copper wires do make some difference if you are looking at a very fine noise band.... but for the Vogue... completely agree with you
Only some people can actually hear the difference, but thats are the audio freaks. And the sound quality also depends on the device itself if it has a good amplifier integrated. (this is where ipods usually get criticized and where the zune is praised) Getting a amp will definatly increase the sound quality. what it does is basically what it is called, it amplifies notes to make them clearer and crisper

How is the quality of the heaphone jack on the MXPE?

In terms of 1. the sound output on the headphone jack (sound quality, output volume). How does it compare to other phones that you have owned? I'm especially interested in how it compares the iphones with the best headphone sound quality such as the iphone 4 or the iphone 5s. I'm aware that the MXPE, as with the iphones, does not have native hi def audio support as it only supports up to 16-bit/48KHz natively (source: www dot whathificom/motorola/moto-x-style/review).
and 2. build quality (is there an inner ring made of metal inside the jack ,completely flush with the metal contact part of the plug, to stabilize the heaphone plug?). The design of the headphone jack, placed on a slended edge, is such that some headphone plugs with larger heads are not going to be able be completely flush with the jack when plugged in, as compared to the iphone 4. In these cases, is the headphone plug stable enough when plugged in such that it will withstand prolonged usage? Has anyone had any issue with similarly designed headphone plugs on the moto x 2014 and the nexus 6 after prolonged usage?

[Q] Quality of the headphone jack on the MXP

In terms of 1. the sound output on the headphone jack (sound quality, output volume). How does it compare to other phones that you have owned? How does it compare to the iphones with the best headphone sound quality such as the iphone 4 or the iphone 5s.
and 2. build quality (is there an inner ring made of metal inside the jack ,completely flush with the metal contact part of the plug, to stabilize the heaphone plug?). Is the headphone plug stable enough when plugged such that it will withstand prolonged usage?
I find the quality of the headphone jack quite good. My previous phones are Samsung Galaxy S3 and Nexus 5.
The sound quality is good imho, good loudness and no need to install any software to tweak the sound.
As for the metal jack, the headphones are stable enough when plugged in. I don't have the feeling that there will be issues with prolonged usage.
I also found both the audio and build quality of the jack quite good.
+1 from me also. I have a pair of Sony headphones that come with my Z3, the sound quality is on par with or better than any recent phone I've used, much better than the S6 for sure.
hb20 said:
In terms of 1. the sound output on the headphone jack (sound quality, output volume). How does it compare to other phones that you have owned? How does it compare to the iphones with the best headphone sound quality such as the iphone 4 or the iphone 5s.
Click to expand...
Click to collapse
I didn't like the sound. I used the equalizer to amplify the bass sound. Anyway, my reference was a in-earphone, which have better bass reprodution.
hb20 said:
and 2. build quality (is there an inner ring made of metal inside the jack ,completely flush with the metal contact part of the plug, to stabilize the heaphone plug?). Is the headphone plug stable enough when plugged such that it will withstand prolonged usage?
Click to expand...
Click to collapse
The build quality is ok. The earphones are quite comfortable, but the cord is thin.

Le Max 2 X820 USB Audio adapter quality concerns

I've been eyeing the Le Max 2 X820 for a few months now and I think it's a great deal but the implementation of the 3.5mm headphone jack always makes me rethink. For anyone out there who owns this phone, I have two major questions that always cause me to rethink my purchase decision.
1. How snug is the audio adapter? Headphone jacks give a much more snug connection to the device than the USB-C jack in every phone that I have ever used. The fact that I'll be pulling out the USB audio adapter hundreds if not thousands of times in my ownership of the device really makes me worry that it'll become so loose with mechanical stress that it'll eventually just lose all grip and fall out with even the lightest of pulls.
2. I hear people make claims like "the audio quality is out of this world" or "this is the smartphone for audiophiles." Do those claims have any substance? I have a DAC at home for when I want a dedicated music listening experience and I find it hard to believe that a digital signal running through a low voltage power source could perform anywhere near the quality of a dedicated DAC. What exactly does CDLA do? Allow a lossless passthrough of your music to the USB digital signal? Does it serve as a DAC?
Thanks for taking the time to read this.
The USB adapter is very snug on mine - it is actually quite hard to pull it out even when you want to. Sound through the adapter with a good pair of headphones is decent. I have been playing lossless CD rips and they sound great, especially with the Dolby Atmos dsp. CDLA is only a thing if you buy the Leeco earbuds (I have just ordered a pair from Gearbest for about £10 in a flash sale). Basically it just sends the music digitally rather than converting to analogue on board. The earbuds have a 24-bit hifi audio decoder chip embedded in the usb plug.
kanagawaben said:
The USB adapter is very snug on mine - it is actually quite hard to pull it out even when you want to. Sound through the adapter with a good pair of headphones is decent. I have been playing lossless CD rips and they sound great, especially with the Dolby Atmos dsp. CDLA is only a thing if you buy the Leeco earbuds (I have just ordered a pair from Gearbest for about £10 in a flash sale). Basically it just sends the music digitally rather than converting to analogue on board. The earbuds have a 24-bit hifi audio decoder chip embedded in the usb plug.
Click to expand...
Click to collapse
I see.
So the USB adapter doesn't do any processing and just serves as an analogue pass-through and the DSP is built right into the device. So I can expect pretty much the same audio quality as any other phone with a headphone jack unless I use the CDLA certified earbuds.
The standard 3.5mm jack isn't exactly a pricey component. Makes me wonder why it was removed in the first place. It's not like the device's selling point is its slimness.
Thanks for the info. :good:
Yes, as far as I know the adapter is just a pass through and doesn't contain an audio chip. The fact you can buy them for just $1 or $2 online would seem to confirm that.
enmasse said:
The standard 3.5mm jack isn't exactly a pricey component. Makes me wonder why it was removed in the first place.
Click to expand...
Click to collapse
Hello. The socked for 3.5 mm jack does not seem to be, but is the component that takes pretty much place inside the phone. I have lately disassembled my previous phone and realized that.
regards Olek
kanagawaben said:
The USB adapter is very snug on mine - it is actually quite hard to pull it out even when you want to. Sound through the adapter with a good pair of headphones is decent. I have been playing lossless CD rips and they sound great, especially with the Dolby Atmos dsp. CDLA is only a thing if you buy the Leeco earbuds (I have just ordered a pair from Gearbest for about £10 in a flash sale). Basically it just sends the music digitally rather than converting to analogue on board. The earbuds have a 24-bit hifi audio decoder chip embedded in the usb plug.
Click to expand...
Click to collapse
The thing is, analogue audio signals over the short length of cable on headphones are already basically 'lossless' so CLDA doesn't really have any benefit apart from the fact the DAC is external from the device so the headphone manufacturer may implement a better one than LeEco would have otherwise. That's it.
mikeysteele said:
The thing is, analogue audio signals over the short length of cable on headphones are already basically 'lossless' so CLDA doesn't really have any benefit apart from the fact the DAC is external from the device so the headphone manufacturer may implement a better one than LeEco would have otherwise. That's it.
Click to expand...
Click to collapse
I agree. Losing the headphone jack is retarded. They could have just put the 24-bit chip from the earbuds in the phone and had a normal 3.5mm jack (it's not like the phone is very thin or waterproof). I would never have got a phone without it by choice, but for me it was a compromise I was prepared to put up with to get a high spec phone at a low price.
Regarding the adapter, mine is already starting to suffer from cable failure at the point where the cable joins the USB jack. Luckily they are very cheap to replace - I just ordered a 10 pack (not LeEco ones) from AliExpress for just $7.
kanagawaben said:
I agree. Losing the headphone jack is retarded. They could have just put the 24-bit chip from the earbuds in the phone and had a normal 3.5mm jack (it's not like the phone is very thin or waterproof). I would never have got a phone without it by choice, but for me it was a compromise I was prepared to put up with to get a high spec phone at a low price.
Regarding the adapter, mine is already starting to suffer from cable failure at the point where the cable joins the USB jack. Luckily they are very cheap to replace - I just ordered a 10 pack (not LeEco ones) from AliExpress for just $7.
Click to expand...
Click to collapse
For the price I can put up with the adapter that's for sure. Hopefully we see some nice 3rd party ones with better DACs in them.
Do the iPhone 7 users complain about the same problem? I personally don't care as long as the USB-C to 3.5 mm adapter works.
I think the rationale to lose the headphone jack is untenable on all levels. Not having the option to listen to music through your headphones while having your device plugged into wall power is something I won't ever understand. We're not at a point where most consumers own Bluetooth headsets yet and wireless charging is still limited to trickle power.
I don't know about iPhone users but maybe they just have a higher tolerance to retardation?
I lost the one which came with my phone, so I ordered some of the cheap replacements. I haven't been impressed so far. I'd happily pay more for one which had a high quality Wolfson or similar DAC but I haven't been able to find one.
I bought cheap USB C dongle and the sound was absolutely awful, which makes me think I may have been mistaken in thinking the LeEco adapter (which has very good sound) is just a pass-through. Maybe it does have some kind of DAC and amp in it.
Hi,
I read an Italian review that complained about the incompatibility of different otg adapters with the phone.
Can the same be said for the 3.5mm adapters? Any experiences on that?
Thank you
When i bought the phone i also bought 3 extra adapters incase I lose one or need to use different earbuds. They all sound the same because its only passthrough. But the ones I bought extra are much better quality.
MerlijnD said:
When i bought the phone i also bought 3 extra adapters incase I lose one or need to use different earbuds. They all sound the same because its only passthrough. But the ones I bought extra are much better quality.
Click to expand...
Click to collapse
Exact opposite of my experience. The original LeEco adapter and another LeEco one I bought were both great. Non-LeEco ones I bought sound terrible. Like, really unusably awful.
I bought some cheap, generic USB-C to 3.5mm and the audio quality was very strange in a bad way. They all sound bad. I've been using a small Bluetooth receiver for a few months now and it works great, but I'd still rather plug into phone.
If you want a high quality DAC solution, the Creative E3 would be good. I'm using some 'Vital' adapter I got on Amazon for £10. Pretty good for the price
Anyone know where we can buy an official adapter?
jaw2floor said:
I bought some cheap, generic USB-C to 3.5mm and the audio quality was very strange in a bad way. They all sound bad. I've been using a small Bluetooth receiver for a few months now and it works great, but I'd still rather plug into phone.
If you want a high quality DAC solution, the Creative E3 would be good. I'm using some 'Vital' adapter I got on Amazon for £10. Pretty good for the price
Anyone know where we can buy an official adapter?
Click to expand...
Click to collapse
AliExpress. The same one as the one the phone comes with costs about $3
i would say the sound is okay with the one came with the phone, nothing more nothing less. Also there r enough cheap and good bluetooth earbuds!
I wonder if it's theoretically possible to use the DAC from the original earbuds to make a universal adapter for any 3.5 earbuds? Like just cut the wire and connect it to the 3.5-jack Mother. Because I'm having hybrid multi-driver earbuds with 3.5 and don't want any other for now.
Does anyone know what exactly DAC is used in LeEco earbuds?
The LeEco CDLA earbuds sound pretty good, but they have the same problems (but magnified) as the apple buds they clearly mimic in appearance - damn things refuse to stay in your ears, and the cables are really weak and flimsy. I haven't used mine all that much but they are already starting​ to fall to bits

Resources