Related
after rooting my p1000, i`ve testet some tools.
for test reasons i`ve set density changer to 200 dpi and in the options i`ve used the reboot store funktion.
now the phone boot up sequenz stops after bootanimation.
sequenzes of vibrations are looping continously.
screen is blank. (no connect to kies possible)
(vol up+pow) factory reset and cache wipe will bring no effekt. (sometimes the recoverytool crashes and reboot, before the wipe is done)
download mode booting (vol down+power) will bring the 'hard working android' logo, but it will
not really connect to kies 1.5.3.(firmware flash mode in kies is not responding to usb drivers)
the p1000 hardware is already detected and the drivers are installed.
odin seems to be detecting the device on virtual com port 9, but i
don`t have any recovery image to flash in nandroid recovery. (update.zip)
samsung-firmwares doesnt have a p1000 categorie,yet.
has anybody a link to the original (odin flashable) firmware?
or any other hints? maybe by adb?
thanx,
DOMin8or
the manual
samsung-stuff.de/board/thread.php?threadid=25123
the flashfiles
netfolder.in/folder.php?folder_id=88MLsfM
problem solved
i`ve flashed with odin 1.3
the firmware P1000XXJID.tar and P1_20100909.pit
after flashing its italian again. but its changeable to german and many other languages.
now its working again.
Hey guys,
i've got a big problem with my galaxy tab too.
Just the same symptoms like DOMin8or, but to me the fix does not work.
I used the 909pit and XAJID firmware in Odin3 1.3, but after reboot it hangs in the recovery mode with following problem:
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can*t mount DBDATA:
your storage not prepared yet. please use UI menu for format and reboot actions.
copy default media content failed.
Click to expand...
Click to collapse
Wipe/reboot does not change anything. It boots, samsung video appears and it hangs like it did before.
I hope someone can help me, i'm so frustrated .
(Sorry for my bad englisch, i come from germany )
EDIT---------------------------------EDIT
Oh, no. Things getting worse. I tried a galaxy s firmware and now the screen is black (without backlight) und
the led is on.
I cannot turn off the device or enter any menu.
But I can still flash, because the galaxy tab is shown in Odin3 (no firmware changes anything).
Plz. I need help! My tab is getting hotter and hotter, 'cause of the led.
EDIT2--------------------------------EDIT2
That is what I have done:
- I rooted the device on stock firmware (XXJID)
- I tried to run the voodoo lagfix, afterwards i couldn't boot.
- I flashed the firmware as described above and had the problem( in quote).
- I flashed a galaxy s firmware
The only I can do with the tab is to connect with odin3 and flash it, but every firmware and
pit I tried leads to the same result: Nothing changes.
The camera-led is on and if I hold the power button the one is ca. 3s off.
Is there a possibility do rescue the tab?
You used Galaxy S firmware?
Jeeeeeesus.
Sent from my HTC Desire
GANJDROID said:
You used Galaxy S firmware?
Jeeeeeesus.
Click to expand...
Click to collapse
I know, that was stupid.
What I do not understand is that I can flash the tab with Odin without an error, but nothing happens. Are there different bootloader? And the tab still can't execute the start up code?
Nype said:
I know, that was stupid.
What I do not understand is that I can flash the tab with Odin without an error, but nothing happens. Are there different bootloader? And the tab still can't execute the start up code?
Click to expand...
Click to collapse
Bit of an understatement. but everyone learns from their mistakes.
And I wouldn't know as I don't have one yet. Maybe post a new thread to get help?
Sent from my Full Android on Bravo using XDA App
the reason why densitiy changer would crash my device
the device f*cked up, because there was no busybox in the system, after
rooting with superoneclick short fuse root.
the density changer`s programmer knows about the problem and he
told me, that i have to install the busybox from market first.
superoneclick 1.4 does not installed a busybox automaticly.
maybe the new version of superoneclick will fix that.
normaly it could push the busybox by adb, automaticly.
Nype said:
- I tried to run the voodoo lagfix, afterwards i couldn't boot.
- I flashed the firmware as described above and had the problem( in quote).
The only I can do with the tab is to connect with odin3 and flash it, but every firmware and
pit I tried leads to the same result: Nothing changes.
-----------------
A:
please, dont use any lagfix. how for? my galaxy tab doesn`t lag at any time.
it rulez very very smooth with stock firmware.
A:
I`ve flashed the stock firmware, downloaded from samfirmware.
now, everything is ok.
and after rooting, dont forget to install busybox from market.
there are some (root requireing) applications more, who wants the busybox.
Click to expand...
Click to collapse
Dear guys,
have the same problem after flashing a new firmware
update media, please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can*t mount DBDATA:
your storage not prepared yet. please use UI menu for format and reboot actions.
copy default media content failed.
everytime bei using differnt firmwares.
Any idears ?
any one can help me my tab p1000 is brick and show only LITTLE LOGO FOR
MOBILE AND COMPUTER. HELP ME PLS
fahadz said:
any one can help me my tab p1000 is brick and show only LITTLE LOGO FOR
MOBILE AND COMPUTER. HELP ME PLS
Click to expand...
Click to collapse
what exactly have you done?
as long as you may go in Download mode (keep pressing the power button together with Down Volume, can be restored without any problem !!!!
i thought it is solved already.. but how to solve it???
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)
I was trying to upate the SUBinary and it told me to reboot. As soon as I did I get a message saying "Custom Binary Blocked by FRP" and a red text saying "Secure Fail : Kernal" help me.
It has something to do with your Google account being logged into the phone.. samsung can send signal to reset it but they won't if it's been rooted etc still trying to make sure reflash omg the phone with original rom would make it worse or not. Or maybe just reflash in the kernal. I'm on t mobile but can only find original rom on t mobile same network but we will see. I'm on my fiance a accident messaging from her phone lol or maybe just reflash the kernal the whole problem for me is I don't have a computer to try to reflash from what someone told me I may try to reflash with odin 3.90 with a tar file to the exact model number
Solution
I had the exact same problem as you but i found a fix
i know this is a very late response but who knows maybe some people will run into it
First of all you will need
-odin3
-samsung usb drivers
-g530w tar md5 file find yours here (im telus variant but bell worked for me)
https://1fichier.com/dir/OgrN3QNx
or
https://www.youtube.com/watch?v=N33i15UVCyA
g530w Pit file here
https://drive.google.com/file/d/0BzyeAt2hy6Xea0VPUDBLOWY5WU0/view
or
http://www.sammobile.com/forum/showthread.php?t=30863
and use odin to flash your phone while its in download mode connected to your computer
skip to 1:28
https://www.youtube.com/watch?v=6lki9ei2-WM
sorry for super messy post i rarely post things i hope this saves you time
This is the best and quick fix for FRP Lock
...Just follow the link: https://forum.xda-developers.com/grand-prime/help/custom-binary-blocked-frp-t3266961/page3
Worked for my SM-G530W
I had the same problem, and i used Kies3 (not compatible with my phone anyway), but if you go on toolbar to "TOOLS", "Firmware Upgrade and initialisation", it asks you for your device model (for mine i typed SM-G530W, and then it asks you for device serial number (S/N) found under the battery by the IMEI number. After this, follow on screen prompts (Restart your device in Download mode/ PDA, connect USB cable, etc), and let the software download and install (factory rom); After your device restarts, you are good to go (sometimes if it gets stuck on booting, remove battery for few second and start again.) Now you have to go back and set up everything you want, including re-rooting your device... Good luck. (My device is Galaxy Grand Prime SM-G530W Factory unlocked rom, Android 5.11.
Hi people, have a strange problem here.
I got a G530FZ (one sim) from a friend for revival. His doughter used the phone for about a year(in Germany). So the problem is - the phone doesn't want to unlock anymore. It is locked with a pattern lock. The pattern is known and it works, but only for a second or two. I can see the homescreen, but cannot do any action. Every time I try with the right pattern, I get a message : "com.android.systemui" was stopped. For my feeling the phone is still locked. After this 1-2 second I see the pattern again. I checked if I really have the correct pattern and tried the wrong one. Result - "Wrong pattern" message.
Well, I tried to use the unlock pin(is also known), but I can't access this option. I tried to force the pin unlock through entering the wrong pattern again and again. Result - the phone restarts after second or third wrong pattern Also good to know - it restarts also after a couple of tries with the correct pattern.
All right, after I tried the easy way, I decided to just do a factory reset of the phone. But also with no sucsess. I rebooted to recovery and did "wipe data/factory reset" Result -- failure on formatting data and system.
Well, I decided to reflash the phone through ODIN, rebooted to "Download mode" and tried few different stock firmwares from samfirmware - FAIL. NAND WRITE START ends with FAIL everytime.
Then I tried to root(just to check), then to flash a custom recovery and so on -- FAIL. Everytime NAND WRITE START
What can I do with this problem? Everything I normally can do with my Galaxy S2-6 and it works - doesn't work with this G530FZ May be I'm dumb and the phone is firmware-locked and I need to unlock first before I can do anything with it?
So, again the key data for the phone:
SM-G530FZ one sim
KTU84P.G530FZXXU1AOA9
1 year old, but warranty rejected because of brocken glas(glas is brocken for 5 month and wasn't the trigger for problem above)
Recovery mode - reachable, but factory reset fails. ADB sideload WORKS, but I don't have an idea how to use it. I tried to use "ADB Run" programm, but if I try to dump something thru ADB - I get a fail message
USB Debugging is NOT on, and I can't activate this option with brocken unlock function
Download mode works, but ODIN fails on Nand write start (only tried with AP section). Tried 3.09, 3.10.7, 3.12.1
Unlock pattern known, but don't work
Unlock pin known, but I can't reach this option
Knox counter 0x0 - but nobody really cares about it. If your solution can help, but trigger the knox - you're welcome
What I didn't try:
I've found a engineer firmware for G530FZ with pit and so on. But It's a firmware fo g530FZ DUALSIM. Till now I was a bit scaried to try it. Do you think I could?
Thank you in advance for all help you can provide and sorry for my english. I can understand every answer in russian, german and english, so feel free to answer in your own language if your english is worse then mine
Valerii
Any help?
Vercion odin not correcta your problem,sorry my ingland
Docratres prime said:
Vercion odin not correcta your problem,sorry my ingland
Click to expand...
Click to collapse
I tried four different versions from 3.09 till 3.12
The same problem for evry one version.
if you try to install TWRP and testing install rom deodex
Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.
So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?
What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?
Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!
Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?
A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1
Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.
Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk
Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?
For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?
So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.
@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687
I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656