Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Mostly fixed.
mcmilldew said:
Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Click to expand...
Click to collapse
So was able to flash twrp via Odin and then reboot into recovery and flash my backup of CM11. But odin never wants to flash stock firmware for me. I like CM but i use the s pen to much so i wanted to go back to rooted stock. Any ideas on why odin isn't working for stock firmware? its still fails after a few seconds. Anyways atleast i have a usable phone for now.
mcmilldew said:
So was able to flash twrp via Odin and then reboot into recovery and flash my backup of CM11. But odin never wants to flash stock firmware for me. I like CM but i use the s pen to much so i wanted to go back to rooted stock. Any ideas on why odin isn't working for stock firmware? its still fails after a few seconds. Anyways atleast i have a usable phone for now.
Click to expand...
Click to collapse
1. You should give us the problem/failure message from Odin so we can read why.
2. You're on the wrong forum if you want N900T specific help.
3. You can always flash a new TW ROM from TWRP
mcmilldew said:
Once again i am here looking for help. I was flashing the stock firmware to my Note 3 via odin and something must have gone wrong. It said failed after writing some of the file to the device. Now i am in a soft brick with no recovery. I am only able to get into download mode. I have tried reflashing the firmware via odin but it fails after getting a failure to write error. Is is possible that the phone won't accept the file because maybe the usb debugging option was reset? Phone says this is read letters after the failed download. SWREV checkfail sb(1)fused 2> binary 1. If anyone has any ideas or a link that would help, i would greatly appreciate it.
Click to expand...
Click to collapse
"SWREV checkfail sb(1)fused 2> binary 1" usually means you are trying to downgrade something in a way that Samsung/T-Mobile does not want you to.
Most likely you need to download the latest firmware (and not the old one):
http://www.sammobile.com/firmwares/1/?model=SM-N900T&pcode=TMB#firmware
let me start by saying I've read almost all your threads only reason im actually bothering is because I'm really feeling like smashing my phone to bits .... that's how frustrating this has been. my phone was rooted and custom ROM till about 4 weeks ago, when Tmobile told me the IMEI on my phone was reported as stolen ... i grabbed my box as my phone i have since it was new and compared the IMEI ... to my surprise IMEI on box and on Phone chasis was not same as the one inside phone .... my phone was unblocked by a local unblocking service here in PR so i went to them and surely they took my phone and lent me another one while it was getting fixed ... "IMEI" was being changed again and it wasn't the one on the box either ... the gave me lame excuse about my IMEI .... they kept my note 3 for a week almost 2 after i got it back my note 3 said it was rooted but i couldn't use any apps for rooted phones as it would say i didn't have root access ... as i no longer trust these people i went on and tried fixing the issue myself ... and here's the thing i have tried absolutely everything cf auto root tar from download mode and even thru odin all versions of odin and using the sm-n900w8 cf auto root and the right roms "different one's to see if it was the rom's or the phone" i am about to give up i simply cannot root my phone so that i can install a modified rom ... thought of contacting you guys ... as my last resort ... i am so sorry to bother i know you guys are very busy ... but if you guys cant help i will have to settle for just a regular note 3 and that sucks... i have picture of absolutely everything i have tried and the outcome and the errors i have gotten and all in pics if needed...
Please pardon me for asking for a little help i really thought i could done this i guess i am not as savvy as i have thought...
Thanx in advanced Emilio Pinella
Does the IMEI on the box match the IMEI on the label attached to the battery compartment?
Have you tried using Odin to get back to a completely stock ROM, flash TWRP, and flash supersu from TWRP?
Ok here we go ...
Yes IMEI on box and phone chasis are same ... the different one is when you press *#06# ...
Secondly i have tried usin odin but absolutely all the files i downloaded are in .zip and odin does not recognize any of them i tried to convert from zip to .tar but it crashes odin thats why i have tried it from recovery mode ... even CF auto flash for sm-n900w8 doesnt work odin does recognize phone so it isnt a driver issue ... maybe if i had apropiate files in right format i could try flashing from odin ... but i dont and i cant find the files in .tar which is what odin recognizes ... as i said i have really tried almost everything ... i have been wondering can it be possible these people lock my phone in a way i could not do anything? ... will wait for your replay ... my phone sucks @The Moment i havent downloaded anything as i am factory resseting everytime i try a new method ... just fyi i do activate devops and usb debug after each wipe ...
Use 7zip or WinRAR to extract the zip from sammobile.com. Once unzipped, it should give you a tar. md5 file.
hello again...
well i was certain of my answer but before i started writing i had doubts so i went and open all the files i have for flashing with odin ... and yes none of my .zip files have any .tar files in them , i have no clue why they are zip files if they are intended for use with odin ... so i went to sammobile.com and yes i had downloaded the 3 files pertaining to my cel phone and tried flashing the stock rom but none of them worked ... some just werent recognized and some gave me whole file signature error or signature failed error ...
i have Tesla-hlte-5.1.1.High_Voltage.2.1-Release-20150824 and its a zip and has no .tar, inside also have cm-12.1-20150423-UNOFFICIAL-temasek-hlte-V10.4 and also no .tar inside and its in .zip format, also have X-Note_Build_15_ND5_Public and yes its a zip and no tar inside...
SM-N900W8-4.4.2-(KOT49H.N900W8UBUCNI1) is my original ROM and it does not have .tar inside ....
something they all do have in common is they have an img file inside that cannot be open ...
and i downloaded files for twrp but jajaja also in zip and no tar inside , just an image file wich is not recognized by odin and not recognized by recovery mode either as i have tried putting all these files in my sd card and have tried doing from recovery ending with results of .... whole file signature failed and signature failed error and also wrong footer error i have pic of all this ... would you want me to send them to you i wouldnt mind... btw thx for your time i really apreciate it.
If the files came from sammobile.com, they are defnintely tar. md5 files.
How many times are you unzipping the file from sammobile.com? The original file from sammobile.com should only be unzipped once.
Well after last replay i went and downloaded all 4 available files for my note 3 from the one dating at 2013 to the one with 5.0 lolli i will do this again tonight and will post the results ... i am certain they will be the same as last time but can you please remind me of steps to take using odin and which odin should i use as i have a few versions .
Once again thx for your time .
I like Odin 3.07 which is what I always use.
If you use Odin 3.07, put the phone into download mode, open Odin 3.07, place the tar.md5 file in the PDA box, uncheck everything except f.reset time, connect phone to computer, flash, when you see the word "RESET" in the status window, remove USB cable, remove battery, replace battery, use button to boot into recovery, perform a factory reset, wipe cache, reboot.
Ok
I will do this from home as soon as i get there and i will post results any specific one you would want me to start with?
Start with a rom that matches the bootloader currently on the phone.
Ok
Hmmm is bootloader the number after model example UBUCNC1?
Yeah just checked and bootloader would be for my current 4.4.2 N900W8UBUCNC1 .... Also says that latest firmware is one of the firmware i downloaded the one containing lolli 5.0
So you downloaded the cnc1 from sammobile.com and there is no tar.md5 file after unzipping?
Just got home
I got home im unzipping and i will let you know in about 2 minytes if there are tar.md5 inside what i downloaded ...
Ok so far so good
All have .tar.md5 in them so i will try flashing with same rom version i have 4.4.2 to see if then i can root and flash a cutom rom ... tell you in a few minutes how it went... wish me luck.
ok finished
i finally got to flaSH WITH odin and now my phone is 5.0 lolli ... can you guide me on how to flash root with odin as cf auto root does not work i took picture of what it did when i tried to auto root tell me where to send it .... or can you tell me where or who might have tesla 5.1.1 high voltage rom or X-note in .tar.md5 format ...
once again thanks for your time and understanding all i need now is to be able to root it so that i may install custom rom after i actually find them in .tar.md5 format.
Find twrp here
http://forum.xda-developers.com/showthread.php?t=2494245
Get the latest 2.8.7 or any 2.x.x 4.4 .tar.
Then get SuperSu flashable. You can google that.
Flash twrp with odin.
Flash SuperSU.zip with twrp.
It's rooted.
If you want to flash a custom rom just flash the rom of your choice in twrp. No need to root first.
Sent from my SM-G925F
Root is not required if you want to install a custom ROM, just install a custom recovery. I recommend flashing TWRP.
Find TWRP for your device from here (make sure you download the tar version of TWRP): http://teamw.in/Devices/
Supersu 2.46 is here: https://download.chainfire.eu/696/SuperSU Download and save Supersu to either the internal or external memory. If you put supersu on an external memory card, power off the phone and put the card into the phone.
Boot the phone into download mode.
Open Odin and uncheck everything except f.reset time.
Click on PDA/AP button and put TWRP into the box.
Connect the phone and flash TWRP in Odin.
When you see the word "RESET" in the status window, remove the USB cable, remove battery, replace battery, boot into recovery, flash Supersu, and reboot.
Ok will do now and tell you if anything ... but i read somewhere this version of android is unflashable ... but i will try what you are saying .
Which version of Android is not flashable?
Ok i gotta say if it wasnt for you i would still be stuck ... fortunetly i am riding 5.0 lolli and my phone is now officially rooted all i need to do is get tesla's 5.1.1 high voltage on it and i will be good ... so basically just need tesla in .tar.md5 to be good ... all thx to you .
Where can i download it or now that i have twrp as my recovery can you guide me thru on that? ... thx again.
I rooted my phone about six months ago so I could have super user permissions. Today, I decided I wanted to try to install cyanogenmod.
After following the instructions to install CM and repeatedly failing (with no apparent harm to the phone), I thought the issue might be that I hadn't unlocked the bootloader. I tried to install TWRP using Odin, but apparently I had installed safestrap back when I rooted. I opened safestrap, attempted to install the packages listed on this post [http://forum.xda-developers.com/ver.../rd-unlocking-galaxys-s5-bootloader-t3337909], and my phone is now apparently/maybe softbricked. I tried to follow the un-bricking instructions on that same page, but I'm getting "fail" messages from Odin.
I do not know what I'm doing. I downloaded what I thought was the stock TAR for my US Verizon Galaxy S5, but it's giving me fail messages when I try to install it with Odin in the AP slot. Am I missing something? Do I need a Pit file or something else in the BL or CP slots? What am I missing?
I would really appreciate any help. I'm out of my league with this.
To add information, I'm getting an error message on my phone saying "[aboot] fused 2 > Binary 1 error" and even after googling that I'm not sure what the fix is.
I just want to get back to non-bricked. Even stock is acceptable.
Go to Sammobile. Com and download ok3 or PB1 firmware for s5 verizon and flash it in odin to your phone
ok so let me start by saying im not the best tech savy person here but a few months i rooted my sm-g550t1 with twrp and everything was fine i do not know what happened but i erased something im thinking a parition or partition that when i went to reboot my phone it said their was no os on it i tried to fix it via odin and i cant remember exactly what happen but i got the emergency firmware blue that would allow me to do any but put it into download mode from the i flashed twrp back on to the phone now im trying to flash it back to stock firmare gain i really dont know what im doing in odin it say sboot.bin then fail when i go into twrp and try to flash custom rom it says so systlink not extracted or something like im all out of ideas i need some one to walk me thru step by step on how to get my phone back up and running
tjanon said:
ok so let me start by saying im not the best tech savy person here but a few months i rooted my sm-g550t1 with twrp and everything was fine i do not know what happened but i erased something im thinking a parition or partition that when i went to reboot my phone it said their was no os on it i tried to fix it via odin and i cant remember exactly what happen but i got the emergency firmware blue that would allow me to do any but put it into download mode from the i flashed twrp back on to the phone now im trying to flash it back to stock firmare gain i really dont know what im doing in odin it say sboot.bin then fail when i go into twrp and try to flash custom rom it says so systlink not extracted or something like im all out of ideas i need some one to walk me thru step by step on how to get my phone back up and running
Click to expand...
Click to collapse
Did you ever do a back up if your system in twrp that you can restore in twrp? If not, do you know what your stock operating system is? When you flag in Odin the phone needs to be in download mode and you should have 4 files that you place in the different sections that are shown in Odin (the BL file goes in the BL section, AP goes in AP section, and etc.) In Odin you flash .tar files, not .bin files. Google the correct build for your phone and model and download the 4 files. For twrp, you need a flashable .zip that will work for your model or a version that you would put in a twrp backup file and restore from twrp.
Just Download You'r Firmware from the link and flash it with odin.
Dont use any .pit file
Link: https://www.sammobile.com/firmwares/galaxy-on5/SM-G550T1/TMK/download/G550T1UVU2AQC4/206346/
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
zzThrain is right -- I wouldn't risk flashing custom ROMs at this stage, especially because many contain new bootloaders or other stuff that might make this even worse for you. Just pick up the relevant Samsung stock ROM file (from, for example, SamMobile) and see if it boots normally again. Once it does, re-do the process *after checking all MD5s of the files you used* -- I, too, have had it happen before that a download went corrupted and I flashed it. If all is well, get into Download Mode and let Odin rip.
rixon.d9 said:
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Click to expand...
Click to collapse
Go to recovery mode & transfer rom to phone using pc. wipe cache, delvikcache, data only. No need to wipe internal sd. Install rom & reboot.
if you phone goes to recovery or download mode, no need to worry. If it doesn't go to neither recovery nor download mode, them your phone might have probably bricked.
It's my pleasure to help you if you still facing this problem
zzThrain said:
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
Click to expand...
Click to collapse
Hi
I tried flashing stock rom from sammobile. I could find for SM-935FD hence downloaded SM-935F.
It got stuck at 90% showing System in ODIN.
From the ZIP file which is the file that needs to be flashed among below ? I tried AP.
AP_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship_meta.tar
BL_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship.tar
CP_G935FXXU2DRAG_CL648265_QB8691891_SIGNED.tar
CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
HOME_CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
Now when I try again it immediately shows FAIL. Am i Flashing the right stock rom ?
It Worked. Thanks to all who helped.
I wasn't running ODIN as Admin and also was using an slightly older version V3.10.7.