Related
I tried to downgrade from Kitkat to JB via flashtool this morning which I often successfully flashed with the same method. But while the flashing is going on and almost finish the flashing (system.img, userdata.img, etc. are already flashed), there seems to be some problem and popped out that the flashing is fail. And then the device does not boot up. While I tried to reconnect the device to PC, the PC cannot recognize the device as shown in the picture. Unable to process any further method. Does anyone in this forum knows how to recover the bricked device like this?
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
9Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
hruaiapunte said:
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
Click to expand...
Click to collapse
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
RSGI_PT said:
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
Click to expand...
Click to collapse
my e7 died. you are stuck using flash tools. is not even recognized by most PCs. maybe it drain? I can do? help me
I have the same problem, screen is completely black after trying to instal newer official rom. When I connect it to PC, it detects "hid device". I tried power + volume buttons combinations, but nothing changes. Sometimes notification led turn red for a few seconds but nothing else. And once win xp randomly detected phone as that "q..." thing, but it doesn't anymore. What else can I do?
Can anyone help me? I tried everything and my phone is still hardbricked.
Hello guys
Today i received my E7 and i tried to update via the tool unfortunately something went wrong and now i cant open it nor fastboot or recovery. Some hours ago i tried to connect via usb and appeared on the GNQC but later it showed as unknow device. It was my first day with the phone. Right when i connect /disconnect the usb i can hear the sound but i cant do anything. Is it dead or i can revive it somehow?
It was the first day:crying::crying:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
RSGI said:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
Click to expand...
Click to collapse
PLZ HELP i try to update using this http://www.needrom.com/download/gionee-elife-e7-32g/comment-page-2/#comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
---------- Post added at 15:32 ---------- Previous post was at 15:29 ----------
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
plz help...
PLZ HELP i try to update using this http://www.needrom.com/download/gion...comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
thianpa he thil hi i solve thei toh m
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
No one..? :crying:
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
so you cannot boot into recovery or fastboot either?
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
Just flash it again, but this time with "Firmware upgrade " in SP Flashtool instead of "Download". Change from KK to LL needs reepartitioning, so firmware upgrade.
The reason why you don´t "see" the S3 any longer on the pc is, that the USB storage mode from KK, which is driverless for windows, don´t work right now on LL.
Once flashed to LL you will need to install a driver, for windows to connect to the S3.
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Lowrida said:
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Click to expand...
Click to collapse
Why the SP Flashtool isn´t working any longer? You didn´t deinstalled the driver, did you? Just try to flash again with "Firmware Upgrade".
I don´t know a way to reinstall the driver in windows without the preloader. The only thing you can do, as far as i know, is to use a linux
pc to flash again. Linux don´t need a driver for SPF, only some rules.
Lowrida said:
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
(
Click to expand...
Click to collapse
Booting into recovery or flashtool I meant regardless of pc and/or spflashtool.
If I recall correctly:
hold volup and power boots recovery
hold voldn and power boots flashtool
If you can boot recovery then which one is it? Maybe you can restore something or manually flash preloader bin from there.
After the flash i reboot and then the connect and disconnect sound appears. So i tried differend things, but could not connect. I wanted to flash again, but flashtool did not reconice the phone and nothing in DeviceManager. That's why i thought to remove the driver and try to re-install it. But that did not help..
Holding Vol - or + button with power button or both Vol buttons with power button does nothing.. i tried to hold all combinations at least 30 seconds, but nothing at all.
I have no Linux pc or any knowhow to make a Linux pc.. or a pc to install Linux on..
One last thing you can try: remove the battery, wait a little, insert the battery again. Hold vol+ key, keep holding it and press power
button, while still holding the vol+. If you don´t see anything happening then you bricked the phone.
You will need help from a professional or at least from someone with a linux machine, sorry.
I'll try that.
You have any idea what could have caused the brick?
As i wrote above, moving from KK to LL with wrong parameter "Download" in SPF.
....and a not working recovery.
You should try this method :
darmowyinternet.net/forum/temat-poradnik-jak-uruchomic-uceglony-telefon-po-wgraniu-zlego-romu-test-point_383
unfortunately you have to translate before
Ok i tried that site with google translate and i could a little make up what they are saying.
But that is a very drastically operation, and i would like to give it some other tries before dismantling my phone.
So i googled and googled.. came here: http://forum.xda-developers.com/showthread.php?t=889128
Had enough electronics lying around from my former 27mc hobby, so searched for the right resistors,
cut up a micro usb cable and give it a try... well.. nothing! Tried for about an hour and gave up.
Then i googled on Unbrick Jigs, but for what i read they are only for Samsung phones, so i gues the trick
with the resistors were also?
So googling again... came here: http://forum.xda-developers.com/showthread.php?t=2454004
Reading the tread and the comments, someone mentioned a download for "Mediatek Driver Auto Installer".
Downloaded that and installed the drivers. Plugged in my phone and... whoohoo!! Something is happening! :silly:
My devicemanager saw an "Alcatel single RNDIS interface". I unplugged and plugged my phone a few times to
be sure it was my phone. Sooo... one step further! :good:
Then i googled on this device.. came up with all sorts of network devices, not helpfull. Then googled on Jiayu with
this device. Came up with this tread: https://www.china-devices.com/topic...vcomm-drivers-onto-your-pc-win-7vistaxp-only/
It's a tread about bricked Jiayu G3 devices, but i thought, 'What the heck, lets give it a try!'.
I downloaded the "MTK Megapack - All Tools Here!" and unpacked. Wend back to device manager and manually updated the driver
of the Alcatel device. Show all devices - browse - wend to Megapack map and there were MTK drivers for the 65xx device.
And yess.. when i plug in my phone there's the device: " MTK USB Port (COM7) "
SP Flashtools sees my phone again! :good:
Tried to flash a stock preloader, but got an error: "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) – [EMI] Enable DRAM failed!"
But for now that's a problem for tomorrow.. it's almost 2:30 and i have to got some sleep!
(sorry for the misspellings or telling things not clear, i'm tired and english is not my main language)
Grats!
You can google the error. This leds you in the right direction.
It's alive!!!!!! :laugh::silly::victory:
Because the kitkat stockrom i downloaded gave me the same error over and over i searched for something else.
So i downloaded TF Extreme lolipop 5.1 this morning and give it a try. And all went well. I pulled the usb plug and
pushed power button.. only vibration but nothing. Then pulled the battery and after few seconds put it back in
and try power again. Only 1 vibration.. then tried Vol + and - combinations but nothing. (dammn!)
Then plug the usb in and i saw the battery icon.. it was total empty! (because of a week trying).
So now it's charging and i hope it starts, can't wait!!
Thanx all for the effort in helping me out! :good:
Edit: Ok, so i could not wait and hit power! It shows green screen with Jiayu S3 logo and text "New Load". So i guess it's prepairing for first startup!
my s3 basic is not charging when on.. also when connected to pc thru usb, ipc shows device malfunctioning ,and there is no indication on phone..I try to connect to sp flash tool also no success..same error"usb device not recognized pops up every 2s.everything else is fine..Any method to upgrade to 5.1 now on official kk
Kinda need help, happened something similar
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Kiei said:
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Click to expand...
Click to collapse
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
xtyphoon said:
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
Click to expand...
Click to collapse
You're right, with the 32GB rom version (which is still unavaliable for public use) it worked! I still got it here, so anyone feel free to ask me the link too.
Thanks to xtyphoon and Dior DNA and everyone who made this possible, if you ever come to Girona city, I'll buy you a drink ;D
Kiei said:
[...]if you ever come to Girona city[...]
Click to expand...
Click to collapse
I was around there few weeks ago
Hello everybody, I own an Xperia XC and a couple of months ago I’ve rooted it and I flashed 34.1.A.1.198 firmware, Advanced Stock Kernel and TWRP-recovery. All worked fine, until two weeks ago it lost suddenly the USB connectivity. I tried different USB-cables on different PC’s but neither the phone, nor the PC’s act in any way. Even in fastboot- or flashmode it doesn’t appear in the device manager of the PC’s. I made for a couple of times factory reset, I even changed the phone’s USB charging port with a new one, but nothing changed. I could load the phone only over a power strip with USB-power-supply. I tried to flash the firmware 34.1.A.1.198 again using flashfire (I made a pre-rooted .zip-file with PRFCreator) but now I get a boot-loop. The phone starts till Sony-Logo and after a few seconds it turns off and boots again. Trying to get in recovery mode has no effect (pressing volume up or down and Power-button).
Has anyone any idea, how can I solve this problem? Is there any possibility to make a hard reset without USB-connection?
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Kianush said:
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Click to expand...
Click to collapse
Thanks for your ansver Kianush, but it seems the phone can't handle any connected devices at the USB-port. Besides of that, when I try to connect it in flash- or fastboot mode, the LED goes green or respectively blue, but none of my PC's doesen't recognize it as a connected device in any way.
I tested the PC connection with an other Xperia XC (my daughter's), it worked without any problems. It was shown in the dewice manager as an "SOMC Flash Device".
It seems like some USB-kernel drivers are lost (?)
I think an option could be using s1tool, but I don't find something for Xperia XC and I don't know yet where the testpoint is for this phone.
Please someone help me. I'm on LOS15.1 and was browsing on facebook app while spotify and a VPN app running on background. Suddenly, while scrolling fb feed, spotify stopped playing and screen got hanged. My phone turned off and I thought it was just a random reboot. But unfortunately, it didn't restart anymore nor I can able to turn on the phone.
I tried charging it and nothing's displaying on the screen. I tried pluging it to PC and device manager detected it as "QUSB_BULK".
Is it bricked or something?
Looks like a Qualcomm driver error. I have once fixed this error on a one plus device. But really have no idea how it is done on a dual partition device like miA1
Alanjameson99 said:
Looks like a Qualcomm driver error. I have once fixed this error on a one plus device. But really have no idea how it is done on a dual partition device like miA1
Click to expand...
Click to collapse
Is it possible to flash the device using MiFlash tool? It seems like I can not able to enter fastboot mode.
Brother your phone 900E mode install driver
Edl cable create and edl cable press , volume down and Power press 10 second and boom opening phone fastboot trying bro
Edl cable Google search
Edl cable green and black cable button
Sent from my Mi A1 using XDA Labs
Byramklc said:
Brother your phone 900E mode install driver
Edl cable create and edl cable press , volume down and Power press 10 second and boom opening phone fastboot trying bro
Edl cable Google search
Edl cable green and black cable button
Sent from my Mi A1 using XDA Labs
Click to expand...
Click to collapse
Is that cable plug only thru usb?
Sadly, I have already brought it to a technician. They opened the device to test something from the battery connection then tried to boot up. :crying:
Although it's working fine now.
Three days ago, my phone went off by itself and I had a hard time starting again, it was just loading the bootanimation, I tried to reinstall the ROM, but it did not go into TWRP, although the message Recovery appears on the screen, I insisted and after several attempts, I got into the recovery, formatted everything and I installed the AICP ROM again, and I had to restart,my phone freezes in the LeEco bootloader, then again I insisted until the ROM finally started, but soon realized that it was taking too long to start (30 minutes waiting and nothing).
So I rebooted again, and from then on, I can not go into any mode anymore, trying to access the TWRP, the phone only stays on the Recovery screen until reboot after 2 minutes, when letting the phone try to start the ROM, it only stays on the LeEco screen and restart after 2 minutes, when entering Fastboot, it enters the screen in Fastboot mode, but is not recognized by the computer, not even as unknown device, the same for Download mode.
Is there anything I can try?
Doesn't seem like a a fried motherboard. In my experience, If you fried the CPU, you would still be able to access Fastboot, if you fried the GPU part of the chip, or if the LCD has failed you would feel vibrations..
Do you thin it is possible that you accidentally put the phone into EDL mode? It can sometimes be hard to get out of, and it will give you similar issues.
To leave EDL press and hold volume down and power for 1 minute or longer.
Try this
Install the All in One tool and use it to update your android and fastboot drivers. Afterwards see if the computer recognises the phone port connection by going to Control Panel>System> Device Manager* ( Even though, you may not see the drive, you will maybe still see unknown device or te port)
Maybe a Brick?
If it does not see the phone or show a unknown USB device with port 9008
Try placing the phone into EDL mode by pressing and holding the Vol Up (+) and Vol Down (-) together while simultaneously connecting the phone by USB cable to the computer. Do you see the port or phone now? If you see port 9008 you possibly are bricked, follow the steps on my unbricking thread., if you can not get back to TWRP, or fastboot,and the phone keeps a charge. Then I would think that you are definitely bricked.
Other possible issues
The issue could be the battery. Have you tried using other USB C Cables? If you can use a different usb cable let it charge for a couple of hours then see if you can get into TWRP again . If you can enter fastboot mode try reflashing TWRP, you can use the All in One tool for this.
tsongming said:
Doesn't seem like a a fried motherboard. In my experience, If you fried the CPU, you would still be able to access Fastboot, if you fried the GPU part of the chip, or if the LCD has failed you would feel vibrations..
Do you thin it is possible that you accidentally put the phone into EDL mode? It can sometimes be hard to get out of, and it will give you similar issues.
To leave EDL press and hold volume down and power for 1 minute or longer.
Try this
Install the All in One tool and use it to update your android and fastboot drivers. Afterwards see if the computer recognises the phone port connection by going to Control Panel>System> Device Manager* ( Even though, you may not see the drive, you will maybe still see unknown device or te port)
Maybe a Brick?
If it does not see the phone or show a unknown USB device with port 9008
Try placing the phone into EDL mode by pressing and holding the Vol Up (+) and Vol Down (-) together while simultaneously connecting the phone by USB cable to the computer. Do you see the port or phone now? If you see port 9008 you possibly are bricked, follow the steps on my unbricking thread., if you can not get back to TWRP, or fastboot,and the phone keeps a charge. Then I would think that you are definitely bricked.
Other possible issues
The issue could be the battery. Have you tried using other USB C Cables? If you can use a different usb cable let it charge for a couple of hours then see if you can get into TWRP again . If you can enter fastboot mode try reflashing TWRP, you can use the All in One tool for this.
Click to expand...
Click to collapse
Thanks for answering. I've tried everything.
But I can not see the smartphone when connected. USB drivers are properly installed (I used to recover other LeEco x651, x526 and x520 devices)
I left it restarting for more than hours holding the power button and volume down, no results.
The device does not appear in the Windows device manager in any way, not even as Unknown or 9008 port.
I tried several usb cables.
There is no communication with TWRP or ROM installed and neither with the computer, even though I enter into fastboot / 9008 mode. Only LeEco / recovery logo and Fastboot screen.
I think my main memory is damaged or something.
kakobr said:
Thanks for answering. I've tried everything.
But I can not see the smartphone when connected. USB drivers are properly installed (I used to recover other LeEco x651, x526 and x520 devices)
I left it restarting for more than hours holding the power button and volume down, no results.
The device does not appear in the Windows device manager in any way, not even as Unknown or 9008 port.
I tried several usb cables.
There is no communication with TWRP or ROM installed and neither with the computer, even though I enter into fastboot / 9008 mode.sl Only LeEco / recovery logo and Fastboot screen.
I think my main memory is damaged or something.
Click to expand...
Click to collapse
Well that sucks, if you feel like sending to the phone to China for repair, you can find several shops that are offering to repair any damaged Leeco for $10 and an average cost of $30 for resoldering. On the TaoBao website, use Chrome for translation. Some of their ads mention overseas repair
If it's memory it would be an easy fix for them.
If you don't want to fix it, I highly recommend the Mi8 if it's within your budget, its a perfect phone and you can find them for close to $300. My brother has a Redmi note 6 Pro which is also really nice. He paid $190.
Good Luck.
Sent from my Xiaomi MI 8 using XDA Labs
kakobr said:
Thanks for answering. I've tried everything.
But I can not see the smartphone when connected. USB drivers are properly installed (I used to recover other LeEco x651, x526 and x520 devices)
I left it restarting for more than hours holding the power button and volume down, no results.
The device does not appear in the Windows device manager in any way, not even as Unknown or 9008 port.
I tried several usb cables.
There is no communication with TWRP or ROM installed and neither with the computer, even though I enter into fastboot / 9008 mode. Only LeEco / recovery logo and Fastboot screen.
I think my main memory is damaged or something.
Click to expand...
Click to collapse
Check out this possible do it yourself fix : https://forum.xda-developers.com/showpost.php?p=79302729&postcount=71