System Partition not booting, after reboot its booting into recovery! - Zuk Z1 Q&A, Help & Troubleshooting

Hey, sorry for the ignorance!
I flashed this ZUI (Nougat) rom on top of CM 13 data, phone did boot with old apps. When i pressed factory reset from settings menu the phone went to recovery and since then its only booting into recovery and not into system! everytime i get into TWRP system is not checked. even after mounting system and flashing stock zip. The phone isn't booting into system but recovery only. Tried flashing system.img by Fastboot.
Solved by using QFIl

Flash stock recovery, then boot into recovery.
It will automatically do factory reset, after that your system partition will boot.
Then flash TWRP again.
And do remember, not use Factory reset option from OS while on custom recovery.

Had the same issue, went to fastboot and then flashed through adb. Worked as a charm.

Hi there,
I installed RR os nougat on my phone about a month ago
Since then it was working perfectly fine ,
But today when I tried to interchange my sims the disaster happened
Now my phone is not booting
1st after pressing power button it shows zuk logo and then boots in twrp recovery
And I tried wiping and installing the ROM again but still the problem is there ....
It is not booting in system partition
Please someone help ......

GOKU07 said:
Hi there,
I installed RR os nougat on my phone about a month ago
Since then it was working perfectly fine ,
But today when I tried to interchange my sims the disaster happened
Now my phone is not booting
1st after pressing power button it shows zuk logo and then boots in twrp recovery
And I tried wiping and installing the ROM again but still the problem is there ....
It is not booting in system partition
Please someone help ......
Click to expand...
Click to collapse
Try the above mentioned solutions as flashing stock recovery and then stock OS and then TWRP!
I used QPST method to flash Chinese ZUK ROM through QFIL , and then flashed CM 13 later on. :good:

I flashed stock firmware through fastboot and it booted and then flashed twrp and due ROM !! Now working perfectly fine !! Thanks for help

any idea where i can find stock firmware and recovery? the urls which i find via google are no longer online -_-

akshaybjp said:
Hey, sorry for the ignorance!
I flashed this ZUI (Nougat) rom on top of CM 13 data, phone did boot with old apps. When i pressed factory reset from settings menu the phone went to recovery and since then its only booting into recovery and not into system! everytime i get into TWRP system is not checked. even after mounting system and flashing stock zip. The phone isn't booting into system but recovery only. Tried flashing system.img by Fastboot.
Solved by using QFIl
Click to expand...
Click to collapse
I had the same issue. Solved?

SOLVED!
Go to : https://www.youtube.com/watch?v=vSWC5MAB5cE

For TWRP
If You have TWRP follow this thread https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the terminal is in advanced menu.......

drtarga said:
any idea where i can find stock firmware and recovery? the urls which i find via google are no longer online -_-
Click to expand...
Click to collapse
Can be found here https://forum.xda-developers.com/showpost.php?p=71415281&postcount=6

How to switch off the phone stuck in zUK logo with no recovery installed. I tried long pressing the home button but it reboots to zuk logo ,is there any way to switch off the phone

This will fix it without losing any data. (NO FACTORY RESET NEEDED)
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
PRESS ENTER
THEN TYPE
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
THEN PRESS ENTER
REBOOT
This should boot up your phone without any changes.

Related

[SOLVED] stuck on boot logo - only fastboot mode - no recovery

Hi there.
I used my OP2 with Oxygen OS for a while, so today I decided to switch to kingmercians H2OS.
I must say I had fastboot OEM unlocked, TWRP 2.8.7.0 installed and 100% working.
so I took a backup of my OxygenOS via TWRP, then wiped and flashed kingmercians H2OS.
played with it for some minutes, then I didn't find it worth the upgrade.
and now my hell comes.
I didn't read that I had to flash a revert to lollipop script .zip
so I rebooted into TWRP, went to "restore", and selected my Oxygen OS backup I previously made.
restore was successfully, and swiped to reboot.
then phone didn't start. I am stuck at boot [the one with oneplus logo and powered by android] and nothing changes.
I tried to enter recovery with buttons combo [power + volume down], but nothing happens, phone just starts at boot logo.
I can only enter in fastboot mode, nothing more.
I also tried re-flashing TWRP from fastboot, but with no clue accessing it [fastboot command says it successfully transferred TWRP .img file, but I cannot enter it].
is there any way I can get my OP2 to work once more?
thanks to anyone who wants to help me!
Hello, try using the method in this link. I had the same problem yesterday after trying hydrogen os and comming back to oxygen os and it solved it.
forums.oneplus.net/threads/return-op2-to-100-stock-unbrick-soft-bricked-op2-oxygenos-2-1-1-fastboot-images.388967/#post-13718486
Give me a feed-back !
Good luck
karimfilal said:
Hello, try using the method in this link. I had the same problem yesterday after trying hydrogen os and comming back to oxygen os and it solved it.
forums.oneplus.net/threads/return-op2-to-100-stock-unbrick-soft-bricked-op2-oxygenos-2-1-1-fastboot-images.388967/#post-13718486
Give me a feed-back !
Good luck
Click to expand...
Click to collapse
thanks a lot for for your reply!
I followed your link, but file hosted on mega was missing [link broken].
do you have any mirror?
Why dont you try 1st aid... Or since you try to install MM flash twrp 3.0.0.0
fastboot flash recovery recovername.img
fastboot boot recoveryname.img
zipalign said:
thanks a lot for for your reply!
I followed your link, but file hosted on mega was missing [link broken].
do you have any mirror?
Click to expand...
Click to collapse
The link in mega is working i've just tried it !
lummujaj said:
Why dont you try 1st aid... Or since you try to install MM flash twrp 3.0.0.0
fastboot flash recovery recovername.img
fastboot boot recoveryname.img
Click to expand...
Click to collapse
solved using firstaid.
thanks a lot!
Exodus rom, No recovery
Hi
I used the fix, and get the TWRP on my OP2, but I'm Running on the exodus rom, build 06/10/2016. And after entering recovery mod, and reboot, The phone stay on the exodus logo, then after a few minutes, it restarted. So I get recovery, but now I can't use the phone.
Again, used the Twrp to flash the boot image, and restart. So far so good, but again, I lost recovery mode.
Im I doing something wrong?
I changed the twrp in the fix to get the 3.0.2.0 version, but again, enter recovery and system don't load. So I flashed boot, and recovery, but again, just get one of the two of them.
Tried the TWRP Manager to install it, but It says I already have another versiĆ³n or something gone wrong. (yes the manager says TWRP is not installed)
Tried flashify to install TWRP, downloaded, flashed, but again there is no recovery.
Can someone help me please
Thanks

Stuck on LOGO while going into Recovery Mode

I successfully Flashed Recovery using FastBoot but whenever I am going into recovery mode by pressing VOL DOWN+POWER it just shows OnePlus LOGO and nothing happens after it.
What should I do ?
I was using CW 13 with TWRP but then I FLASHED OXYGEN OS 3.0 and cleared the cache. After that, It is loading into OXYGEN but there is no developer options over there and it is not even going in recovery mode now.
HELP!
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
Boot your phone into fastboot and on your pc, try 'fatboot oem device-info'
If it's locked, you're as ****ed as I was, my thread here.
(
You will have to go with Bhalla's unbrick guide
Tutorial on how to still get into your OS and save your stuff is in my thread - fastboot continue
)
If your bootloader is unlocked, try flashing this recovery (modified TWRP).
If it doesn't work - unbrick guide.
Afterwards, use the OOS 3.0 installation guide from Bhalla
try this
piyushmodi01 said:
I successfully Flashed Recovery using FastBoot but whenever I am going into recovery mode by pressing VOL DOWN+POWER it just shows OnePlus LOGO and nothing happens after it.
What should I do ?
I was using CW 13 with TWRP but then I FLASHED OXYGEN OS 3.0 and cleared the cache. After that, It is loading into OXYGEN but there is no developer options over there and it is not even going in recovery mode now.
HELP!
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449 it worked i can now go into stock recovery...... Need to root but TWRP is not flashing any suggestions?

Cant boot into TWRP

Hello, ive unlocked my bootloader on my h870 and ive flashed twrp. when ive just flashed it i was able to boot into twrp but now everytime i try to boot into it it wil wipe all my data with the stock lg recovery mode can someoneone please help me? Thanks! Just got the phone a few hours ago
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
mprovi_15 said:
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
Click to expand...
Click to collapse
Ok but how can i install root or a custom rom when i cannot boot into twrp?
aaflan88 said:
Ok but how can i install root or a custom rom when i cannot boot into twrp?
Click to expand...
Click to collapse
You need to reflash twrp with the bootloader like the first time.
mprovi_15 said:
You need to reflash twrp with the bootloader like the first time.
Click to expand...
Click to collapse
I understand that mprovi but hen again TWRP doesn't boot unfortunately
aaflan88 said:
I understand that mprovi but hen again TWRP doesn't boot unfortunately
Click to expand...
Click to collapse
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
The stock recovery appears but you have to select the factory reset option and it will boot into TWRP
mprovi_15 said:
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
Click to expand...
Click to collapse
Unfortunately still not succeeded after trying all the solutions i've found here
Hey, i have the same Problem, my TWRP broke, i can't boot into recovery and my Device ist not listed in fastboot mode. Can someone help me out?
I get the ring in windows when i plugin but its not recognizing.. Can someone pls help me out?
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
dwasifar said:
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
Click to expand...
Click to collapse
Oh my god, i really really thanks for your reply, you're so fre*king good. U made my day.
Guys a little help
I only manage to see the TWRP welcome screen and the the phone automatically reboots to system
I can't get to see the TWRP menu at all!!
WTF is going on?
I have repeated the process many many times and always the same. What i am missing here?!?!?
me too when it boots in twrp only showing logo then it reboots in system what are wedoing wrong?
Got the same problem. I unlocked Bootloader, checked if unlocked (yes). After flashing TWRP i see the TeamWin Screen and phone boot again. There is no TeamWin Menu.
A try with an older TWRP-Version and flashing via fastboot with another PC does not work too.
Anybody an idea?
Did you guys manage to fix it?
Matt.
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
MiR4G3 said:
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
Click to expand...
Click to collapse
With 3.2.1.0, 3.2.2.0 and 3.2.3.0 it only briefly shows the TWRP screen and then boots into system anyway.
With 3.1.1.0 the key combination to boot into TWRP as with the other versions above simply doesn't work, again it directly boots into system without even showing the TWRP screen.
I'm stuck with a resetted phone because of this bull****, because some instructions said "oh, the reset dialog will not really reset your data..." - yeah thanks for nothing, buddy.
So what now?
EDIT: I got it working using TWRP 3.1.1.0, but the same version from the OFFICIAL site didn't work, as I described above.
The only 3.1.1.0 TWRP that works with my phone is the one from this Link: http://downloads.codefi.re/rashed/g6/
(which is linked ... somewhere here in the Forum, don't remember which thread)

Not booting into TWRP

Hey everyone,
I decided to root my lg g6 and got a fickle. After unlocking the device and flashing TWRP I tried to boot into it (''adb reboot recovery'' command) and it deleted all data and then twrp shows on screen for a split second and almost instantly boots normally into android so I set it up while still being unable to access twrp and any of it's functions. Does anyone have any idea what could be the problem?
P.S. Of it helps: before that i had a problem that every time I tried to use the ''adb reboot recovery'' command the console said ''no devices/emulators found''. After a couple tries I wanted to check whether the phone was connected just to make sure (''adb devices'') and after that it worked and I ran into the problem above.
Thanks for all the answers
When you first unlock BL and flash recovery you have to manually enter recovery mode.
Hold power and vol down till it turns off. Hold same buttons again until you see lg logo. Release power and press and hold again.
Then ask you to wipe etc hit yes both times and it will boot to twrp.
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Ulrih said:
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Click to expand...
Click to collapse
You have to flash TWRP recovery and when it complete then use the button combo to boot into twrp, otherwise it will boot and restore the recovery.
flash twrp
button combo to twrp
done
Yes I've done that but the problem still exist.
btw thanks for the help
Maybe try fastboot flash recovery recovery.img
Try the all-in-one tool on this forum
By the way, I am running into the same issue.. I have a LG G6 US997,.. I have tried installing TWRP unofficial ones so many times and every time i manually try to access the recovery.. the phone simply wipes all my data to default
Hello,
I have the same problem. Did anyone figure out how to solve it? I'd highly appreciate any help.
If I try to boot into recovery, it asks me to factory reset, i hit yes twice and then the phone just goes on to boot normally. The data is not wiped but I can't get into TWRP.
If I enter "fastboot reboot recovery" after flashing TWRP it returns "fastboot: usage: unknown reboot target recovery"

JiaYu S3 TWRP loop

Hello,
I am into a TWRP boot loop.
- I can boot into TWRP
- I can update ROMs
- I can update TWRP
- I can connect to the computer and send files using mtp://[usb:001,003]/
- I can Wipe ...
But when I reboot into the system, regardless of the ROM that I use, I get again into recovery
I have read in some posts that from the TWRP command one could try to clear the first sectors of the misc partition
For instance for a Lenovo ZUK Z2 (Plus) in https://forum.xda-developers.com/showpost.php?p=72298526&postcount=14 it is said that this could help
"dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc"
but ... I cannot find the misc partition in /dev from the TWRP shell ("find /dev -name misc") !
Could someone help me with this one ? I would appreciate it a lot !
Regards
Same problem on MadOS 8.1 (MT6752)!
TWRP loop
Just flash old stock 5.1 Android ROM through Flash Tool. Its pretty easy. Then turn it, turn it off and wipe data. restart TWRP, upgrade TWRP and install new Android 8.1 and gapps. Turn the phone on and its finished. You can do recovery now for the next instalation if you want. I am doing this often because I have same problem for several months. Fortunetaly google backup works pretty fine so its not problem with installing apps again. The command you wrote above doesnt work for me.
I'm having the same problem. I was using my phone today, when it started to show wifi problems (couldn't connect); so, I rebooted it and its screen started to blink; when I rebooted it again, it automatically entered into recovery mode (TWRP). After this, the phone didn't boot normally (MadOS Android 8.1) anymore - only TWRP. Even when I try to charge it, it boots into TWRP mode instead of showing the battery animation.
In my attempts to solve the problem, I firstly reinstalled the MadOS 8.1 ROM but it kept booting into TWRP mode. So I flashed an old Android 5.1 ROM I got (connected and uploaded the device successfully with SP Flash Tools) but it also kept booting into TWRP (now an older version from the 5.1 ROM). Then I uptadated the TWRP and the OS again to MadOS 8.1 but the result was the same.
With any other alternative, I came accross this topic and tried the steps described above (practically identical to what I just did), but again I hadn't any positive results.
What else could I do?
Hello,
I have finally resolved my issue !!!
a) Using "SP_Flash_Tool_v5.1824_Win" and the "RC5_S3_16GB.zip" stock rom I flashed it using ---->>>>> "firmware upgrade" mode <<<<-------.
The option you can find it in Smart Phone Flash Tool, between the "Authentication File" and the table with the partitions.
b) Once done with the flasshing, boot the telephone into the Stock fimware
c) Boot into recovery (power + volume up) and flash the latest TWRP
d) Flash you new ROM
Do not hesitate to ask me if you have questions.
imascara said:
Hello,
I have finally resolved my issue !!!
a) Using "SP_Flash_Tool_v5.1824_Win" and the "RC5_S3_16GB.zip" stock rom I flashed it using ---->>>>> "firmware upgrade" mode <<<<-------.
The option you can find it in Smart Phone Flash Tool, between the "Authentication File" and the table with the partitions.
b) Once done with the flasshing, boot the telephone into the Stock fimware
c) Boot into recovery (power + volume up) and flash the latest TWRP
d) Flash you new ROM
Do not hesitate to ask me if you have questions.
Click to expand...
Click to collapse
Thanks! With this method, I solved the problem, identical to yours !!

Categories

Resources