Hello Guys,
I have hard bricked ZTE blade A5, and my computer can detected it as Qualcomm HS-USB QDLoader 9008
from all the article that i have read i must be connected as ZTE handset connected Diagnostic Interface to unbricked it.
I've try several ways :
- installed driver (ZTE_Handset_USB_Driver.exe)
- remove batere, simcard dan sdcard
- press volume up & down + power button
- kabel usb dari PC ke HH
stll no vibrate and no zte handset n device manager
I've tried in in windows 7 32/64 bit
force to change driver from Qdloader 9008 to ZTE handset
I've work on this several days and it's make frustated.
But still no luck. Is there any other way that i can still try?
Related
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
Hello everyone.
I bought a oppo a37 i looked for the root, i did not find a good frimeware for my phone, then i downloaded Qualcomm Premium Tool.exe, after opening the program i got go to the GENERAL section and I clicked [reboot option 9008 to 9006] then my phone no longer lights up. and when I mount it via usb on my pc it detects it as ( Qualcomm hs-usb qdloader diagnostic 9006 ) ,not (Qualcomm hs-usb qdloader 9008), i do not know what to do how to flash it, I only fond frimeware of MSM8936 While my phone is an MSM 8916 ... please help me, I am staying without Cell Phone.
PS: when my pc detects it as an Qualcomm hs-usb qdloader 9006 when I hold the power key it becomes an Qualcomm hs-usb qdloader 9008.
Hi,
I´ve got a Redmi 3 (bootloader locked) in bootloop
I installed "MyFlash 2016.03.30.0 (64bits) in my Windows 7 64bit and when I plug in the mobile a new device is found: Qualcomm HS-USB Diagnostics 900E (COM X) but it´s not working properly as it show a Question Mark!
I have change the windows configuration to "test mode" but with no avail.
Any help?
Is there any other option to recover this mobile? I tried the fastboot -> EDL tool but it doesn´t work so I can´t not set the mobile in "Download" mode...
Thanks in advance!!!
Firstly, my phone don't boot in any mode(hardbricked), no display, no vibration, no fastboot, no recovery (even tried shorting 2 - 6 pins), just showing red light when connecting to pc/charger. Earlier, it was showing as "Qualcomm HS-USB QDLoader 9008" in device manager, so after researching on it, I found that I can flash stock rom using qfil tool (used files provided here). Then I tried flashing it using qfil, the process stopped at dowloading firehorse file. "Qualcomm HS-USB QDLoader 9008" in device manager, automatically, disappeared and after then its showing "Unknown USB Device (Device Descriptor Request Failed)" in device manager.
Now, I tired connecting phone with all key combinations, shorting pins, reconnecting battery, updating drivers, changing ports, but nothing worked. I am not able to connect phone in "Qualcomm HS-USB QDLoader 9008" mode, instead it always shows as "Unknown USB Device (Device Descriptor Request Failed)".
Observations: After flashing, even if phone doesn't boot any mode, it heats up when connecting to usb. (earlier it was not same)
It all happened after interrupted flashing, is there any possible solutions to fix it, making phone detectable as qdloader and also unbrick it?
Your help will be highly appreciated.