Firstly, my phone don't boot in any mode(hardbricked), no display, no vibration, no fastboot, no recovery (even tried shorting 2 - 6 pins), just showing red light when connecting to pc/charger. Earlier, it was showing as "Qualcomm HS-USB QDLoader 9008" in device manager, so after researching on it, I found that I can flash stock rom using qfil tool (used files provided here). Then I tried flashing it using qfil, the process stopped at dowloading firehorse file. "Qualcomm HS-USB QDLoader 9008" in device manager, automatically, disappeared and after then its showing "Unknown USB Device (Device Descriptor Request Failed)" in device manager.
Now, I tired connecting phone with all key combinations, shorting pins, reconnecting battery, updating drivers, changing ports, but nothing worked. I am not able to connect phone in "Qualcomm HS-USB QDLoader 9008" mode, instead it always shows as "Unknown USB Device (Device Descriptor Request Failed)".
Observations: After flashing, even if phone doesn't boot any mode, it heats up when connecting to usb. (earlier it was not same)
It all happened after interrupted flashing, is there any possible solutions to fix it, making phone detectable as qdloader and also unbrick it?
Your help will be highly appreciated.
Related
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
So I am trying to use Naman's recovery tool from the oneplus forums (I am sorry but I cannot link it) but when I get to checking my phone in the device manager, it says it is Android HS-USB QDLoader 9008 (COM9) as opposed to what it should be, Qualcomm HS-USB QDLoader 9008 (COM10). Does anyone know why this is happening and how to fix it? in its current state, I cannot run the recovery software.
I remember that in device manager you can change the coms but com9 might be taken so you need to change that first.
It's been long time since I don't do that
Sent from my ONE A2005 using Tapatalk
1439soccerdude said:
So I am trying to use Naman's recovery tool from the oneplus forums (I am sorry but I cannot link it) but when I get to checking my phone in the device manager, it says it is Android HS-USB QDLoader 9008 (COM9) as opposed to what it should be, Qualcomm HS-USB QDLoader 9008 (COM10). Does anyone know why this is happening and how to fix it? in its current state, I cannot run the recovery software.
Click to expand...
Click to collapse
I believe, you have installed the Qualcomm Drivers. If you haven't follow the procedure in my thread on how to install it the correct way.
Now considering, you have installed it, First restart your machine into Test Mode (Driver Signature Enforcement must be off). Then head over to Device Manager and right click Android HS-USB QDLoader 9008 (COM9) -> Update Driver -> Manually Select from list the correct Qualcomm driver. You needn't worry about the COM port as it changes depending on machine and the plugged USB port.
Follow my guide from scratch if required as it is the procedure followed by OnePlus L2 Support Team themselves.
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
My phone has become a little crazy when I connect it to the computer it detects me as Qualcomm HS-USB Diagnostics 900E (COM 10) I have installed it with Qfil I have loaded the twrp but nothing also with YGDP the rom but nothing and the only thing that it works is the little light blinking please help! :crying:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.