Related
I just installed this ROM on my HTC HD2 and now my WiFi won't connect it keeps trying to obtain an IP address but then just eventually disables it because it can't.
I know my Router is fine and my WiFi is up and running because I am using it now on my home PC in this forum.
Anyone else running into this issue or have a suggestion on how to fix?
Its mentioned a few times in that roms thread, you should ask in there.
I can't don't have permission yet as I don't have 10 posts. I did try to search but couldn't find it.
TheCoutures said:
Anyone else running into this issue or have a suggestion on how to fix?
Click to expand...
Click to collapse
Works fine for me...
Hmm this is the first time I've ever ran into an error that wasn't a know one IE Google Voice Search not working on 2.4.5. I ain't got a clue what is wrong with it or how to fix.
No one else is having this issue?
I have this exactly the same issue! And also I cannot ask this question on that thread
So this is definitely a ver 2.5 issue. I switched back to ver 2.4.5. The wi-fi immediately work!
Then I got to v2.5 again. Wi-fi failed again.
I am.... not been able to find a fix though
http://forum.xda-developers.com/showthread.php?t=979000
tomprc said:
I have this exactly the same issue! And also I cannot ask this question on that thread
So this is definitely a ver 2.5 issue. I switched back to ver 2.4.5. The wi-fi immediately work!
Then I got to v2.5 again. Wi-fi failed again.
Click to expand...
Click to collapse
This ended up being the fix for me
I never updated the partion as mentioned here http://forum.xda-developers.com/showthread.php?t=933951 which is needed for version 2.4.5+.
Download:
-135M System CWM (Required for v2.4.5+) - http://www.multiupload.com/5VH6M9XM8B
download the zip file to your pc.. unzip it,then run the program in admin mode..
on the device hold down the power and enter usb flasher...
now start the update..
once this has finished flash 2.5 and it will work.
.
Tried that - didn't fix mine
Hi,
I have a very big problem.
After I’ve flashed this rom (Unofficial cm13 Mr. Coldbird), the fingerprint sensor disappeared from the settings
How can I fix it?
P.s
It 's my first message , I hope I used the correct section of the forum
Do you flash mm-firmware.zip?
for me it works sometimes and sometimes keep hanging " just vibrating without unlock " .. sometimes it says " hardware is not found "
i entered the recovery and flashed mm-firmware.zip again and the same problem exist ... i'm thinking to back to COS 12.1 it was working perfectly !
I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.
Shivver said:
I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.
Click to expand...
Click to collapse
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m
meikelrix said:
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m
Click to expand...
Click to collapse
Install mm firmware.zip
Sent from Zuk Z1 using Tapatalk
Same Problem here.. In cm13 official and Mr coldbirds Version.. Even with installing mmfirmware.zip
I have the same problem too. It have tested on official CM13 and om Mr.Colbird CM13 versions.
me too
the problem of vibrating that was because of third party app like " screen lock " but if you locked it with power button or double tap the fingerprint sensor will work perfectly :good:
I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.
Vfc73 said:
I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.
Click to expand...
Click to collapse
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2
Planet X said:
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2
Click to expand...
Click to collapse
I'll try and report. Thanks!!!
I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.
Vfc73 said:
I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.
Click to expand...
Click to collapse
Fastboot reboot or just press the power button until the phone shut down. I don't know went it didn't help you but i have recovered my fingerprint reader already twice with that procedure. You will lose nothing when just flashing the modem and the bootloader. My guess is that the persist.img is the partition you need to restore for the fingerprints. My fingerprint reader has been acted really crazy when i tried the unofficial cm13. Until it stopped working. I restored my backup and did the procedure to recover my fingerprint reader. I'm now on self built odexed cm13 nightly 's with working fingerprint reader.
Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)
simoneser said:
Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)
Click to expand...
Click to collapse
Read my post above. I have recovered two times from this issue. I had it also because of trying unofficial cm13. You will loose nothing but get back your fingerprints.
I have tried but it doesn't work
Inviato dal mio Z1 utilizzando Tapatalk
I have tried too, but it doesn't work.
Vfc73 said:
I have tried too, but it doesn't work.
Click to expand...
Click to collapse
Yesterday my fingerprint stopped again too. So I did the same procedure again and it didn't work anymore for me too. So I tried to flash the official cm13 again. First it didn't work but after a few minutes it started to work again. I really don't know how this is possible but there is one difference. The radio from official cm13 is newer than the one from COS. I'm happy that it works fine again but I'm afraid it will stop again when I try a different rom again.
So i just got a new moto g4 plus XT1642 (UK amazon version) and so of course the first thing i had to do was install a custom rom, so i followed a guide here to unlock it and install TWRP which went fine until i flashed a new firmware, I dont know if i somehow installed the wrong one but now it wont go past the "checking connection" screen on setup without crashing (sometimes it doesnt even get past the welcome language screen) I have tried flashing the stock firmware but it just does the same thing no matter which one i try (XT1642_ATHENE_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip is the right one i think?)
If anyone could help me get back to marshmellow it started with then i promise i wont mess around with it again :3
Thanks for any help you can give.
Edit: Okay so I finally just went to do the thing i started out to do which was to install the Resurrection Remix rom (http://forum.xda-developers.com/moto-g4-plus/development/rom-resurrection-remix-n-5-8-0-t3507275) so I just thought that maybe if i got it installed it might fix what problems i was having and yeah sure enough i followed what i was supposed to flash first which was (Moto_G4_Plus_XT1643_ATHENE_MPJ24.139-63_Stock_Img) btw and then flashed Resurrection Remix and it just started working again, everything seems fine but I'm worried I might have broken something with all my puttering around with its inside ya know?
But the main thing is phone calls work, texts work, it rooted itself magically, can install unsigned apks and such, wifi works and so does the fingerprint sensor which i heard people were having issues with. So should i just not look for problems and enjoy it maybe? I'm glad i got it sorted im some fashion at least
So I HAVE now noticed that some apps seem to hang/crash sometimes, epecially games, not sure if it has to do with my puttering around though Is there anything I can do to check that everything is working ok? any programs that scan for errors or something?
Happy its working don't get me wrong but no issues would be best ^^
I've got your same model and I use this to get back to stock: XT1621-XT1622-XT1642_ATHENE_MPJ24.139-23.4_cid50_subsidy-DEFAULT_CFC.xml
If you're running rr and everything works you don't need to do anything just stick with it.
gabriwinter said:
I've got your same model and I use this to get back to stock: XT1621-XT1622-XT1642_ATHENE_MPJ24.139-23.4_cid50_subsidy-DEFAULT_CFC.xml
If you're running rr and everything works you don't need to do anything just stick with it.
Click to expand...
Click to collapse
Hey, thanks for the input, I did use that when i was having issues but it still caused that crashing at the connection screen issue sso i dont know why it would work for you and not me, perhaps i needed to get it to a working state before i could downgrade again? I dont really want to try it out now and see, the crashing issue seems to be infrequent so its possible its a different issue (software conflicts or ram overusage maybe?). I'll keep using it and see what issues develop
Trying to flash different Nougat ROM. I have tried several but something is preventing the process getting past the screen where you are asked if you want to use your old settings. It won't proceed. If I try to do a new install it still just stops. I can get back to recovery (TWRP) and restore the backup but I want to change to a different ROM as the one I am using has a few features I don't like.
Update: have tried again. Get to set up your XT 1562 and then after selecting, the message says Setup Wizard has stopped. Can get no further.
Help please.
Rick O said:
Update: have tried again. Get to set up your XT 1562 and then after selecting, the message says Setup Wizard has stopped. Can get no further.
Help please.
Click to expand...
Click to collapse
Keep touching in all four corner of your screen(fastly) it I'll skip the process and lead you to your home screen.
I face same problem twice and this method works for me
check your Gapps package, does it match with the rom version? try bean or open gapps and different packages
Wrong gapps! Many thanks.
https://download.mokeedev.com/?device=zoom
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
X10MINISTER said:
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
Click to expand...
Click to collapse
Rom works but it wasn't maintained. No new bug correction from february.
stuccamelo said:
Rom works but it wasn't maintained. No new bug correction from february.
Click to expand...
Click to collapse
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
X10MINISTER said:
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
Click to expand...
Click to collapse
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
stuccamelo said:
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
Click to expand...
Click to collapse
So, it mean that u also facing the hotspot problem.?
Can u change/install fonts in mokee roms? Cause I have an issue with changing font style using iFont apps..its say installed but after reboot font style doesnt change. Any solution?
linux shall eternally bloat all search engines with expired ?=
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Dr Tungsten said:
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Click to expand...
Click to collapse
There are a lot of recent updates for this rom. I flashed the most recent (2017-11-21 date). I didn't make a lot of testing but the problem you refered has been solved and the performance and stability seems good.
The only issue I noticed so far is that the phone does not start automatically from the shutdown state when an alarm is set.
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
GeorgeTsak said:
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
Click to expand...
Click to collapse
This is not my main phone right now so I spend very limited time using or testing it but you are right, I have just checked that with this ROM the device is unable to pass the SafeNet test so far. On the other hand I have not problems at all playing videos with youtube app or rooting the device. I'm using supersu v2.82 and TRWP-3.0.2-0 for lenovo 6.0 by wzsx150 (didn't try Magisk)
has anyone managed to install this ROM?
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
mrtowel said:
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
Click to expand...
Click to collapse
I think you need a different TWRP version. Try this one:
https://drive.google.com/file/d/0B1Sms71Oe6FIQnl4STlhSk96b0E/view?usp=sharing
Help me!
I'm new to these things. Installing roms and ****s. Can someone help me with the step by step procedure of installing this room on my Lenovo vibe shot. Thanks in advance.
The same probvlem with TWRP
piccolo2k2 said:
I think you need a different TWRP version. Try this one:
Click to expand...
Click to collapse
I have exactly the same problem.
Did you resolved it? Tried also mentioned "Twrp by rahul.rar", but the same problem - unable to mount /system partition.
Thanks for reply,
st
bug fix?
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
hhaekal said:
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
Click to expand...
Click to collapse
Im using it right now.. Im still have the problem with:
-hotspot tethering,bluetooth tethering
-usb mtp
-suddenly shutdown when on wifi
Have someone had the problem with delay in receiving whatsapp messages?
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Alex_135 said:
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Click to expand...
Click to collapse
Hi,
I'm using the release and there is no bug with WIFI.
Linaxx said:
Hi,
I'm using the release and there is no bug with WIFI.
Click to expand...
Click to collapse
How about wifi tethering problem? Does it remain error when wifi tethering are enabled?