hi,
i got my android 5.1 pumpkin last week, i'm trying to root it with no luck.
here is what i'm doing, can someone tell me if i'm doing something wrong...?
after installing it in my car -
typed *#hct#root# into factory settings password, downloading&install kingroot.
when kingroot is trying to root it either stuck on 1-2% for 15 minutes. or it's stop trying and shows "wait for update" (or somthing like that) for 15 minutes...(i lost patient both times and quit).
should it take that long?
i can't upload image of my version info so here's the details:
mcu version: MTCC-KLD6-V2.97
aug 02 2016
android version 5.1.1
480X800
core version +3.0.101
[email protected] #58
build number rk3188-userdebug 11102016.13:54:40
thank you
nadav0348 said:
hi,
i got my android 5.1 pumpkin last week, i'm trying to root it with no luck.
here is what i'm doing, can someone tell me if i'm doing something wrong...?
after installing it in my car -
typed *#hct#root# into factory settings password, downloading&install kingroot.
when kingroot is trying to root it either stuck on 1-2% for 15 minutes. or it's stop trying and shows "wait for update" (or somthing like that) for 15 minutes...(i lost patient both times and quit).
should it take that long?
i can't upload image of my version info so here's the details:
mcu version: MTCC-KLD6-V2.97
aug 02 2016
android version 5.1.1
480X800
core version +3.0.101
[email protected] #58
build number rk3188-userdebug 11102016.13:54:40
thank you
Click to expand...
Click to collapse
I know its an old Post but I have the same model.
Anyone have new info?
Thanks
Tom
Related
Hi All I was wondering if somebody might be able to help me.
I was given an android tv box for xmas and recently it has been resetting itself everytime I try to use it.
I've tried doing a factory reset but same thing keeps happening so was going to do a firmware reset only problem is I'm unsure what numbers have to match to get the right firmware.
My Device is a :-
Tonbux
Model number:
MXQ
Android version:
4.4.2
Build number:
KOT49H.20150820 test-keys
Kernel version:
3.10.33
[email protected] #4
Fri Jun 26 12:34:17 cst 2015
I've tried loads of sites but none of them match the same Build number as my box.
I didn't want to use any of the other firmware that didn't match my Build number just incase I damaged the box, I am capable of doing the reset but only if some1 could confirm if the Build number has to be a complete match or if I'm able to use another I.
I found this latest 1 which is the closest to my number but no luck with exact match anywhere :
KOT49H.20150915 test-keys
Sept 28 2015
Help Appreciated thx in advance.
Fred
Can anyone jump in and provide some help? I'm having a similar issue as the OP. I have a generic Android TV box which is unusable with a lot of crapwares. I just want to erase everything and install a vanila version of Android on it. Here's some info of the box:
- CPU: Rockchip RK3066, 2x ARM [email protected] 1.61GHz
- GPU: Mali 400 MP
Edit: I can kind of get to the recovery mode but no menu appears, just the Andoid robot laying down and a red sign. Before that it shows CloudTVBox so I guess that's the (brand) name of the box!
Thanks a lot
Ok so after some research, I think my main issue now is that I don't have the recovery menu, only the Android robot lying and a red sign. Can anyone provide some help? Thanks
I think you need to research unbrick your device. If someone can tell me how to export my firmware I could send you mine. Here are my following specs down to the chipset (i had to open my box to find out).
Model Android Version Build Number Kernel Version Kernel
MXQ 4.4.2 KOT49H.20150720 test-keys 3.10.33 [email protected] #4 Fri Jun 26 12:34:17 CST 2015
Device Brand Model
LAN Pulse Electronics H1102NL
WiFi Realtek RTL8188EUS
USB Genesys Logic GL850G
RAM SkHynix h5tq4g63afr-pbc
Hello,
I recently bought a Pumpkin Andoird Head Unit for my E46 (I'm not allowed to post links yet so I cant link it here)
It is a little bit buggy sometimes (apps randomly start at startup or sound doesnt work till I restart the device) so I was wondering if I could upgrade the thing or maybe install an other rom on it. After I googled a while i found out that it depends on the mcu wether I can update my device or not (am I misunderstanding things here?). So I looked up my MCU version but couldnt relate to any of the MCU versions I found. If there is something I'm missing or if there is a thread where all of this is explained I'm sorry.
Here are the informations that i get from about device:
Modelnumber: rk3188
Android version: 4.4.4
Baseband version: unknown
Kernal Version: 3.0.36+
Build number:
Alex:5201-20160321-125320-v3(4752)
TFT:5201-20151231-213308-V01
MCU:5201-20160321-113500-V01
Screen resolution is: 1024x600
I hope someone can help me
Best regards
Look here http://forum.xda-developers.com/android-auto/android-head-units/xtrons-mtcd-mtcd-malaysk-rk3188-best-t3486218
I am wondering if anyone has this exact head unit that has done a root and installed a rooted rom?
What I am looking for is this unit comes with 5.1. Lollipop. Well I was told it would be able to mirror my phone to the head unit as well as run an iPod (as there is an iPod app on the screen). I am looking for a rom that might increase this to the marshmallow operating system and allow screen mirroring as well as the iPod functionality. Anyone have any suggestions or work around that have worked for them?
Just saw I needed to post this information as well....
MCU VERSION
MTCC-KLD6-V2.97
Aug 02 2016
Android Version
5.1.1
1024*600
Kernel
3.0.101+
[email protected] #110
Mon 22 17:20:57 cst 2016
Build number
rk3188-userdebug 22082016.17:29:44
by the way I am a noob...
Thanks in advance for any advice given,
Brad
Is there an update for this unit software?
I was wondering with my information below is there a safe update for the software? Does it need to be rooted or just installed? THANKS IN ADVANCE!!!
brad62249 said:
I am wondering if anyone has this exact head unit that has done a root and installed a rooted rom?
What I am looking for is this unit comes with 5.1. Lollipop. Well I was told it would be able to mirror my phone to the head unit as well as run an iPod (as there is an iPod app on the screen). I am looking for a rom that might increase this to the marshmallow operating system and allow screen mirroring as well as the iPod functionality. Anyone have any suggestions or work around that have worked for them?
Just saw I needed to post this information as well....
MCU VERSION
MTCC-KLD6-V2.97
Aug 02 2016
Android Version
5.1.1
1024*600
Kernel
3.0.101+
[email protected] #110
Mon 22 17:20:57 cst 2016
Build number
rk3188-userdebug 22082016.17:29:44
by the way I am a noob...
Thanks in advance for any advice given,
Brad
Click to expand...
Click to collapse
Anyone? help with firmware or rom or both?
brad62249 said:
I was wondering with my information below is there a safe update for the software? Does it need to be rooted or just installed? THANKS IN ADVANCE!!!
Click to expand...
Click to collapse
As you can see in my previous post my MCU Version android version 5.1.1 (trying to get 6.0) kernel and build. anyone else have this same MCU version and such that has updated the firmware and or rom?
Also wanting to back up old firmware or rom is there a way to go about doing this. been many years since I have done this and it was on my Samsung phones. So if you could walk me through the steps I would be greatly appreciative...
Brad
updated mcu
Now wanting to know what to do next.
Hello,
I just updated my Joying Android HU. After reboot, it just boot loop of JOYING logo. Maybe i use wrong firmware. I also not sure what is my Joying model number, FYT or MTCB or etc. Here's the detail of show on the screen, before i update:
Model Number: PX5
Processor: 8 Core 64 bit CPU [email protected]
Memory: 2GB
Resolution: 1024x600
Machine Code: 0700118B0000AA55
Android Version: 6.0.1
Android Security Patch Level: October 1 2016
Baseband Version: Unknown
Kernel Version: 3.10.0 [email protected] #53
Build Number: MXC89L-release-keys-20171110-V7.0
APP Version: TP6735 0.0.54
MCU Version: TP6735 4.33
16GB ROM
Can expert here please advise what i need to do?
Thank you
JackSharing said:
Hello,
I just updated my Joying Android HU. After reboot, it just boot loop of JOYING logo. Maybe i use wrong firmware. I also not sure what is my Joying model number, FYT or MTCB or etc. Here's the detail of show on the screen, before i update:
Model Number: PX5
Processor: 8 Core 64 bit CPU [email protected]
Memory: 2GB
Resolution: 1024x600
Machine Code: 0700118B0000AA55
Android Version: 6.0.1
Android Security Patch Level: October 1 2016
Baseband Version: Unknown
Kernel Version: 3.10.0 [email protected] #53
Build Number: MXC89L-release-keys-20171110-V7.0
APP Version: TP6735 0.0.54
MCU Version: TP6735 4.33
16GB ROM
Click to expand...
Click to collapse
Do you have a joying type id?
Which firmware did you try to flash?
Do you have a fan and/or heatsink on your unit? The Joying units can become quite hot during flashing and even too hot: the 1GB units even more.. That can also cause the boot loop. It might even help to take it partially out of the dash and use a hair dryer on cooling stand via the top of one of the holes in the side (and then of course: install a fan!)
surfer63 said:
Do you have a joying type id?
Which firmware did you try to flash?
Do you have a fan and/or heatsink on your unit? The Joying units can become quite hot during flashing and even too hot: the 1GB units even more.. That can also cause the boot loop. It might even help to take it partially out of the dash and use a hair dryer on cooling stand via the top of one of the holes in the side (and then of course: install a fan!)
Click to expand...
Click to collapse
THanks for the reply.
I did modified my car aircond to allow small hole to blow to the back of the HU.
From the info i gave, what is type of HU?
Additional Info. The physical look is the same like in this video:
JackSharing said:
Additional Info. The physical look is the same like in this video:
Click to expand...
Click to collapse
I overlooked the Android version 6.0.1 on your PX5. This means you have a QD unit. Joying used to have an upgrade from 6 to 8, but that has disappeared. You can not simply flash an android 8 version onto a version 6.0.1.
Contact Joying at one of their email addresses.
Youtube video that i give is upgrade from 6 to 8. Do you mean this tutorial?
JackSharing said:
Youtube video that i give is upgrade from 6 to 8. Do you mean this tutorial?
Click to expand...
Click to collapse
I know it is the upgrade video. Joying did have a special upgrade firmware version some 8-10 (?) months ago. It is no longer on their blog. And simply flashing a version 8 onto a version 6 does not work. That's why I advised to contact Joying.
surfer63 said:
I know it is the upgrade video. Joying did have a special upgrade firmware version some 8-10 (?) months ago. It is no longer on their blog. And simply flashing a version 8 onto a version 6 does not work. That's why I advised to contact Joying.
Click to expand...
Click to collapse
Ok. I think this is the reason why i have bootloop. THank you.
Just bought this unit it says Seicane on the side label.
. I want to update it. can the android OS be updated and more important is the r an MCU update????? IF so where can i find the file to update the MCU? and The OS???? Any help is appreciated. I downloaded one it was entitled , dcmu(MTCE-HF-3.30sp+by+cs-x) and when I attempted to install it brought up the recovery boot screen and locked up , i had to push the reset button to unlock the unit , so im a little nervous about bricking the unit. ANYHELP IS APPRECIATED
Andriod Version :
8.0.0
oct 5,2017
Kernel version:
4.4.93+
[email protected] #312
Thu Jun 7 12"22"58 CST 2018
Andriod security patch level:
OCT 5 2017
mcu version:
mtce_hf_v2.86_1
May 28 2018 10:04:03
CPU
8 core 64-bit cpu coretex-a53 @1.5g
ANYONE???
HMG346 said:
Just bought this unit it says Seicane on the side label.
. I want to update it. can the android OS be updated and more important is the r an MCU update????? IF so where can i find the file to update the MCU? and The OS???? Any help is appreciated. I downloaded one it was entitled , dcmu(MTCE-HF-3.30sp+by+cs-x) and when I attempted to install it brought up the recovery boot screen and locked up , i had to push the reset button to unlock the unit , so im a little nervous about bricking the unit. ANYHELP IS APPRECIATED
Andriod Version :
8.0.0
oct 5,2017
Kernel version:
4.4.93+
[email protected] #312
Thu Jun 7 12"22"58 CST 2018
Andriod security patch level:
OCT 5 2017
mcu version:
mtce_hf_v2.86_1
May 28 2018 10:04:03
CPU
8 core 64-bit cpu coretex-a53 @1.5g
Click to expand...
Click to collapse
Can anyone help? Also can i update andriod 8 to newer. I bought the carplay domgle but andriod auto wont show up and i cant ge ipods to work. Help please
Wow no response...
Anyone anyone?
I have the exact same unit, which i purchased almost 2 years ago. The MCU is 2018 and outdated. I just started having issues with the wifi not wanting to turn on, actualy it goes directly back to off as soon as you press it. Normally it auto connects to my hot spot. Is there anyone that can help walk through an update ? Secaine is non responsive on MCU updates. Well actually they responded but i will have better luck jumping off of a 50 story building than getting help from them.