Hello. I'm new here and recently I had bricked lg g2 but I used this tutorial https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Everything went fine and after flashing partitions on linux and it booted to TWRP but there was again white error Security something and I had to flash partitions again. And thats where it begins.
I accidently did something wrong and now I can't power on my lg g2. Cant recovery, download mode etc. When plugged to PC it only shows in device manager QHSUSB_BULK but none of partitions are visible.
Is there anything I can do more?
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
mateo96n said:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Seriously? That's the same damn link as above.
Related
Hi, I've got a HUGE problem.
Today I decided to root my G2 d802 (european free distribution) and flash a CM rom.
After cleaning dalvik and factory reset i tried to flash this rom but Status 7 showed up.
So, I tried to launch G2 and find a solution for it but it started to boot loop.
Okay.
Even worse, (don't ask how, but it wasn't me!) there PROBABLY was format /system,,
After that my G2 stucks on LG logo and nothing else happens. No loop no anything. I can only go into recovery while seeing white screen asking if I agree to do format. Everytime, but it never boots normally, it's always stuck.
So, what can I do?
I can't access the phone from my computer while beeing in the recovery (it appears as a device, but i cannot access it..).
I can only use recovery
LG G2 D802
CWM-based Recovery v6.0.4.4
Sorry for bad english, not my native language.
Help me, please! How can I unbrick my G2?!
So I tried to flash Stock rom, but when in download mode G2 isn't considered as plugged into a computer. LG Mobile Support Tool can't find the device... Any help?
legions91 said:
Hi, I've got a HUGE problem.
Today I decided to root my G2 d802 (european free distribution) and flash a CM rom.
After cleaning dalvik and factory reset i tried to flash this rom but Status 7 showed up.
So, I tried to launch G2 and find a solution for it but it started to boot loop.
Okay.
Even worse, (don't ask how, but it wasn't me!) there PROBABLY was format /system,,
After that my G2 stucks on LG logo and nothing else happens. No loop no anything. I can only go into recovery while seeing white screen asking if I agree to do format. Everytime, but it never boots normally, it's always stuck.
So, what can I do?
I can't access the phone from my computer while beeing in the recovery (it appears as a device, but i cannot access it..).
I can only use recovery
LG G2 D802
CWM-based Recovery v6.0.4.4
Sorry for bad english, not my native language.
Help me, please! How can I unbrick my G2?!
Click to expand...
Click to collapse
There is a way to probably fix it but if you cant just put your phone in the water till it breaks and use your warranty to get another one thats what I did with my D801 when it bricked
CHlCKEN said:
There is a way to probably fix it but if you cant just put your phone in the water till it breaks and use your warranty to get another one thats what I did with my D801 when it bricked
Click to expand...
Click to collapse
Nevermind. It came back to boot loop, so it's not bricked.
But i've got some problems.
Mainly - i still can't access my phone through my computer.
When i try to flash Stock Rom (http://forum.xda-developers.com/showthread.php?t=2432476 this thread) i recive: http://i.imgur.com/ijSgtwp.png - screenshot from Device Manager when in download mode: http://i.imgur.com/kMLCW7t.png and when in recovery: http://i.imgur.com/wGU6qnz.png
So we're back into boot loop.
Any help? Please?
Can you attach an otg card reader or flash memory stick from recovery?
adb sideload helps you. or adb push
The problem is, because of a tutorial on my local Android site which tells how to unloop boot in G2 I've got TWRP now instead of CWM (it was about access to terminal something and writing a command, but it didn't do ****, but it seemed to work for few people), and it would be fine, but... now computer doesn't recognize my phone. Unidentified Devices: LG G2-D802, so I can't access sideload...
corrsea said:
Can you attach an otg card reader or flash memory stick from recovery?
Click to expand...
Click to collapse
I've got OTG Cable (bought for my Nexus 7) somewhere, but none of above.
LOL NEVERMIND
Becouse I had nothing to lose i decided to try to flash CM and it worked.
CWM couldn't flash it for 5 times, TWRP did it immediatly.
Topic closed, thank you for your responses.
You need to first download the kdz and lg flash utility with drivers.
Install drivers
The factory reset deleting system, cache, internal sd.
Then shutdown your g2.
Start to downloaded mode connecting your g2
Flash kdz & voila... Done
I too bricked my phone before. My flashing stuck at 49%. Recovered using above method, all is well now
This works 1000%. I bet on it. Just remember to wipe the phone completely before flashing. You will return to stock with unrooted status in download mode. U will have your warranty back too
Sent from my LG-D802 using XDA Premium 4 mobile app
Sent from my LG-D802 using XDA Premium 4 mobile app
I had a similar problem, got it fixed with this http://forum.xda-developers.com/showthread.php?t=2582142
Maybe it works for you too.
I tried to download via lg tools and flash something and failed.
when you restart the phone gave me the black screen.
I run ubuntu from the procedure
http://forum.xda-developers.com/showthread.php?t=2582142
after trying this procedure, the phone remains fixed on the lg logo.
How can I fix ??? I pray you are in a panic ...
the computer does not recognize the phone more
:crying::crying::crying::crying::crying:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
greyhd said:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
Click to expand...
Click to collapse
I have a d802
the phone is stuck on the lg logo.
As per the procedure would have to start the recovery but will not start.
Not part of the download mode.
I can get into factory reset but the pc does not recognize.
It seems to me a serious case. The guarantee how it behaves in these cases?
Dont you have recovery to flash new rom via ADB?
Try with ubuntu once again it will work out
ubuntu does not recognize the phone more.
The recovery is the original one.
Make sure the ports on the pc are set to 41. Do you have the drivers in the pc as well?
Sent from my VS980 4G using Tapatalk
I've been looking around the the last few hours but I can't find a fix to my problem. I ended up bricking my LG G2 today after flashing a paranoid rom. I had selected everything to get wiped including internal storage (which was a stupid mistake) and now I have no roms on my internal storage. Plus I'm stuck at the LG logo screen which isn't blinking. And to top it off download mode boots straight to fastboot and I can't get the computer to recognizes the device when its under fastboot but it does when its stuck on the LG logo. I've tried the drivers already and they don't do anything under device manager for it to notice the device plugged in. Anybody got any ideas?
try this one http://forum.xda-developers.com/showthread.php?t=2681089
maozer said:
try this one http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
Did this last night and it worked.
Sent from my VS980 4G using Tapatalk
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
Hello,
When my friend tried to install custom recovery of lg D802 on my lg ls980 it started to show white lines only. (Refurbished)
The other friend try to fix the problem and bricked it. He says that he deleted partitions.
When i connect to my computer it shows qhsusb_bulk.
It is the only working thing.it does boot at all.
Is it fixable?
If so, plz help me
Same problem as you
farrukhhh said:
Hello,
When my friend tried to install custom recovery of lg D802 on my lg ls980 it started to show white lines only. (Refurbished)
The other friend try to fix the problem and bricked it. He says that he deleted partitions.
When i connect to my computer it shows qhsusb_bulk.
It is the only working thing.it does boot at all.
Is it fixable?
If so, plz help me
Click to expand...
Click to collapse
Hi
I also have this problem. One of my partition is in FAT format. Is the same for you or I formated it by mistake?
I tried all the tutorials , the one with linux, the one with SRK nothing works. Also my phone is refurbished and on the back of the motherboard is written D802 and on a cover of a chip near camera D801 and on the cable of proximity sensor D800.
Do you managed to fix it?
i dont know how but One of the repairing shops fixed,my issue
nitaalexandru said:
Hi
I also have this problem. One of my partition is in FAT format. Is the same for you or I formated it by mistake?
I tried all the tutorials , the one with linux, the one with SRK nothing works. Also my phone is refurbished and on the back of the motherboard is written D802 and on a cover of a chip near camera D801 and on the cable of proximity sensor D800.
Do you managed to fix it?
Click to expand...
Click to collapse
go with what the motherborad says dont pay attention to other parts.. and if you can enter download mode vil up then connect usb cable. the use the goback to stock guide on general g2 section. download your variant , what motherboard says if download mode works the restore back to stock...