Database Users

Honor 6+ PE-TL10 Impossible to upgrade to Android 6 - Tried everything

My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?

what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk

hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now

caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk

Looks like a Dev ROM to me. Your bootloader is unlocked?

My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..

caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?

goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone

caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.

Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit

You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571

Write you soon. PC crashed

I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"

HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts

goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore

http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406

Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.

How to install NXT-L29C432B560 (Official) Stock Firmware. (Guide with download links)

NXT-L29C432B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L29
Build Number: NXT- L29C432B560
EMUI Version: 5.0
Android Version: 7.0
Region: Europe
Status: Official
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/changelog.xml
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security. [Fixes] Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating and factory reset.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Dload Method 1
1- First, download ubdate.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now go to the phone Settings>Update and press the menu button.
4- Now select choose Local update.
5- It will show the update.app file now tap on it to start the installation process.
6- Wait until the installation process is complete and then reboot your device.
7- Done
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Dload Method 2
1- Download update.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now turn off your device.
4- Now press 3 buttons (Volume Up, Volume Down and Power Button) together. The update process will start automatically.
5- Now wait for some time to complete the process.
6- Done.
7- Did I help you? A ''thanks :good:'' would be highly appreciated
HiSuite Method
All Users with NXT- L29C432BXX can update using HiSuite:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata error
6.3- update.zip (Reboot when success)
ignore E:unknown command
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT-L29C432B560(Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated

Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem

Can I install on L09?

Giving it a try now.
---------- Post added at 05:36 PM ---------- Previous post was at 04:40 PM ----------
ImSpiderman said:
Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem
Click to expand...
Click to collapse
Getting the same thing on my end.

In TWRP, format data then it will write to data partition.
Do factory reset to reset data partition password.
If u r already on nougat, just dload and reboot

I tried to dload from nougat but it fails instantly. Also, when i tried installing this from twrp i formatted everything but sd before trying to install it

ImSpiderman said:
Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem
Click to expand...
Click to collapse
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata, error
6.3- update.zip (Reboot when success)
ignore E:unknown command

sillanwali said:
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata, error
6.3- update.zip (Reboot when success)
ignore E:unknown command
Click to expand...
Click to collapse
I just keep getting the same error flashing both update files, actually the installation of the full hw zip last like a minute but the update's installation just stops immediately after that error

Then you may have to try via PC hisuite
Or
Go back to 4.1 and flash fresh

What about NFC? it is added to settings or has this version the same bug as other 560 versions?

bluheart said:
Then you may have to try via PC hisuite
Or
Go back to 4.1 and flash fresh
Click to expand...
Click to collapse
im flashing with twrp from 4.1 everytime actually, also hisuite when i have old b560 says me that im on latest firmware

Got error 7 when trying to flash these two zips. Tried everything from installing from an OTG cable to internal storage, error 7 all the way.

All, maybe I am missing something....I am on Nougat already but would like to reflash 560 via TWRP due to the fact that dload isn't working (update aborted after 5%). Unfortunately even with a ok. after flashing recovery I am still on stock recovery....Please advice!

flyingjack said:
All, maybe I am missing something....I am on Nougat already but would like to reflash 560 via TWRP due to the fact that dload isn't working (update aborted after 5%). Unfortunately even with a ok. after flashing recovery I am still on stock recovery....Please advice!
Click to expand...
Click to collapse
Yes flash and wipe cache
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Faithnetic said:
Got error 7 when trying to flash these two zips. Tried everything from installing from an OTG cable to internal storage, error 7 all the way.
Click to expand...
Click to collapse
In TWRP, format data only then u will be able towards write on that partition.

bluheart said:
Yes flash and wipe cache
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Fastboot erase cache dosn't work....?????
Click to expand...
Click to collapse

after i format data, wiped everything but microsd it still gives error, also i need to add that before the error it says
"mountencrypt: failed to mount /data: no such file or directory" maybe we need to change data filesystem? or what? i really dont understand why both files wont flash, i flashed b521 and first b560 without problems of any kind

Same error 7 :SS

Then go back to 4.1 and relax for the next update

All, I need your help and advice....
I massed up my phone....I flashed TWRP but never been able to enter Recovery as "fastboot erase chache" did not work and ended up in a bootloop while trying to access Recovery...after several additional -stupied- tries I distroied my OS (5B60), menas I lost my key-board etc....
I still can connect via fastboot and/or adp but cannot clear cache. Therefore I am not able to enter TWRP and flash any softwrae. Dload doesn't work either as I donot have a stock recovery...
Please guide me back to a working phone
Thx a lot!!!

flyingjack said:
All, I need your help and advice....
I massed up my phone....I flashed TWRP but never been able to enter Recovery as "fastboot erase chache" did not work and ended up in a bootloop while trying to access Recovery...after several additional -stupied- tries I distroied my OS (5B60), menas I lost my key-board etc....
I still can connect via fastboot and/or adp but cannot clear cache. Therefore I am not able to enter TWRP and flash any softwrae. Dload doesn't work either as I donot have a stock recovery...
Please guide me back to a working phone
Thx a lot!!!
Click to expand...
Click to collapse
Try to relock bootloader and dload again, it should work

How to install NXT-L09C432B560 (Official) Stock Firmware. (Guide with download links)

NXT-L09C432B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L09
Build Number: NXT- L09C432B560
EMUI Version: 5.0
Android Version: 7.0
Region: Europe
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/changelog.xml
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Dload Method 1
1- First, download ubdate.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now go to the phone Settings>Update and press the menu button.
4- Now select choose Local update.
5- It will show the update.app file now tap on it to start the installation process.
6- Wait until the installation process is complete and then reboot your device.
7- Done
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Dload Method 2
1- Download update.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now turn off your device.
4- Now press 3 buttons (Volume Up, Volume Down and Power Button) together. The update process will start automatically.
5- Now wait for some time to complete the process.
6- Done.
7- Did I help you? A ''thanks :good:'' would be highly appreciated
HiSuite Method
All Users with NXT- L09C432BXX can update using HiSuite:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide (For Rooted Phones)
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- Install update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- Install update.zip (Reboot when success)
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT- L09C432B560 (Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated

<root>
<root>
<component>
<name>TCPU</name>
<compress>0</compress>
</component>
<vendorInfo name="common" subpath="" logfile="changelog.xml" package="update.zip"/>
<vendorInfo name="hw/eu" subpath="hw/eu" logfile="" package="update_full_hw_eu.zip"/>
<vendorInfo name="public" subpath="public" logfile="" package="update_data_full_public.zip"/>
<files>
<file>
<spath>changelog.xml</spath>
<dpath>changelog.xml</dpath>
<operation>c</operation>
<md5>0D679BA87E653806C93212E237DB0D4C</md5>
<size>44976</size>
</file>
<file>
<spath>update_full_hw_eu.zip</spath>
<dpath>update_full_hw_eu.zip</dpath>
<operation>c</operation>
<md5>653FF22700F58BB336AA86BB13FAB1A2</md5>
<size>554919746</size>
</file>
<file>
<spath>update_data_full_public.zip</spath>
<dpath>update_data_full_public.zip</dpath>
<operation>c</operation>
<md5>7ACBBB5D655083793BD7EBCE5E22A32B</md5>
<size>381762140</size>
</file>
<file>
<spath>update.zip</spath>
<dpath>update.zip</dpath>
<operation>c</operation>
<md5>0B31191173DEECC0C224D64BF0F97C38</md5>
<size>1488820456</size>
</file>
</files>
</root>

Is this another beta or...full Nougat version...?

Sojiroska said:
Is this another beta or...full Nougat version...?
Click to expand...
Click to collapse
Stable Version
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.

Is twrp the only option or can we use dload method?
Sent from my HUAWEI NXT-L09 using Tapatalk

legendarycom said:
Is twrp the only option or can we use dload method?
Sent from my HUAWEI NXT-L09 using Tapatalk
Click to expand...
Click to collapse
You can also apply dload method.

Do you have to have unlocked bootloader for the dload method to work? I've tried it and it stops at 30% with an error message.

sillanwali said:
You can also apply dload method.
Click to expand...
Click to collapse
Tnx. Got offical OTA trough hicare early adopters.

@sillanwali
Can you pleas help me to get B560 im now on B521 beta version i not have Twrp or Root and my bootloader i think is unlocked
Huawei Fan Club
www.facebook.com/groups/huaweifanclub

blinkt88 said:
@sillanwali
Can you pleas help me to get B560 im now on B521 beta version i not have Twrp or Root and my bootloader i think is unlocked
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated

sillanwali said:
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Click to expand...
Click to collapse
But i hear somewhere if i dload to B560 than NFC and few other things not work and is good to go back to B152 or B170 and than wait for OTA update for B560
My model is NXT L09C432 and im on B521 beta test keys its sayd NRD90M test keys does i can anyway use HiSuite and update to B560
Does i lose data and apps if update to B560 via HiSuite?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
---------- Post added at 11:38 AM ---------- Previous post was at 10:46 AM ----------
sillanwali said:
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Click to expand...
Click to collapse
I try with HiSuite and no new update find its says i have latest DRM90M TEST KEYS
Huawei Fan Club
www.facebook.com/groups/huaweifanclub

blinkt88 said:
But i hear somewhere if i dload to B560 than NFC and few other things not work and is good to go back to B152 or B170 and than wait for OTA update for B560
My model is NXT L09C432 and im on B521 beta test keys its sayd NRD90M test keys does i can anyway use HiSuite and update to B560
Does i lose data and apps if update to B560 via HiSuite?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
---------- Post added at 11:38 AM ---------- Previous post was at 10:46 AM ----------
I try with HiSuite and no new update find its says i have latest DRM90M TEST KEYS
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
It's mean your phone is not NXT-L09C432

Backup
1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
2- Install HiSuite on your Computer
3- Connect your phone to HiSuite
Accept options on your phone:
Allow access to device data? >YES, ALLOW ACCESS
Allow connection in HDB mode? >(Always) > OK
4- Go to Backup>
5- Now wait for some time to estimate the data.
6- Select all>Encrypt with password>Backup>
Set Password
Confirm Password
Password hint
7- Click OK
8- Now wait for some time to complete the process.
9- Done.
10- Did I help you? A ''thanks :good:'' would be highly appreciated

My model is NXT L09C432
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei Fan Club
www.facebook.com/groups/huaweifanclub

blinkt88 said:
My model is NXT L09C432
View attachment 4017660
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
I finally was able to install the update, but as blinkt88 mentions i also get test-keys build. It also seems like the full rom .zip isn't available from huawei's servers anymore, so im not able to test that. Any solutions to this?

LINK IS BROKEN/DOWN
**
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip

jee82 said:
I finally was able to install the update, but as blinkt88 mentions i also get test-keys build. It also seems like the full rom .zip isn't available from huawei's servers anymore, so im not able to test that. Any solutions to this?
Click to expand...
Click to collapse
Which update you install B521 or B560?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub

I installed the one from this post, so I suppose it is 560, no way to be sure tho since it only says test-keys. I've also applied 560 ota from firmware finder after i installed this one, so I reckon I'm running 560, kernel version is also 30 Dec.
I came from nxt-l09c432b192.

xT29c said:
LINK IS BROKEN/DOWN
**
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip

My version is nxt-l09c605b100.
Can I also update?

[Guide] (2017.12.07update) How to root ur Mate9 oreo (emui 8.0)

First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
-----------------------2017.12.07 update---------------------------
sorry for so many needless steps of the old method.
root mate9 emui8 now only need 2 steps (so please neglect the old method).
new method:
1. reboot to fastboot mode . and fastboot flash recovery_ramdisk this
2. reboot to recovery mode. flash supersu 2.82 sr5 mod. (download link)
done!
ps: i have compared the "supersu 2.82 sr5 mod" to official supersu 2.82 sr5
the only different is:
the 683th line of file: "/META-INF/com/google/android/update-binary"
official package is : TRY="boot_a BOOT_A $TRY"
and the mod package is: TRY="ramdisk_a RAMDISK_A $TRY"
so the the mod package can be trusted i think.
that's all !
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
----------------------------------------------------------------
old method ( too many needless steps, please read the new method!):
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .

thanks very much!!!!!!

OP, How did u upgrade to oreo? I also have an AL00

Astra1 said:
OP, How did u upgrade to oreo? I also have an AL00
Click to expand...
Click to collapse
there are two posts told me how to update mate9 from nougat to oreo
1. https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
2. https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
notice:
a. the part of post 1 --"2.1 Method 1 using HWOTA Tool–" works on my mate9 Android N (emui 5.0) .
b. the part of post 2 --"Downgrade Nougat" works on my mate9, i succeed to downgrade to Nougat emui5.0 MHA-AL00C00B233.
c. the attachment of the post 1 seem to be designed to work on mate9 pro(because of the "LON") , so i modified the package to fit mate9. i don't know if it's neccessary.
i have wrote a guide，but it's in Chinese . 2rd floor (2#) of this post
Good Luck！

abbyvictor said:
First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
Click to expand...
Click to collapse
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app

Maheriraqi said:
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!

abbyvictor said:
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!
Click to expand...
Click to collapse
Thank you, but I need to files twrp and how to install on the oreo 8
Sent from my [device_name] using XDA-Developers Legacy app

Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!

AlemSalleh said:
Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!
Click to expand...
Click to collapse
It's my pleasure.
but i found this guide contains many redundant steps
i will simplify it later.....

viper4android for emui 8.0 ?

[No message]

hijibiji said:
viper4android for emui 8.0 ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2191223
no version for Oreo until now as i know

I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB

Flavio said:
I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB
Click to expand...
Click to collapse
/recovery has a new name "recovery_ramdisk" in mate9 oreo
if you want to flash stock recovery , you should execute " fastboot flash recovery_ramdisk xxxxxxxxxxxxx.img" in fastboot mode.
"RECOVERY_RAMDIS" may be refer to "recovery_ramdisk", so try to execute " fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img" in fastboot mode.
i'm not sure.
gook luck!

Huawei Mate 9 bricked

My mate 9 does not turn on, I have been upgrading by firmware finder B369 and the handset does not start,
I tried to install TREBLE ROMs by FastBoot and it does not start, I tried to perform the method HWOTA8 and it does not work too, how do I now?
s there no other method than the HWOTA8?
My device goes into the TWRP but it doesn't work.

Please...help me ????

aureliomilitao said:
Please...help me ????
Click to expand...
Click to collapse
Try this tool to install firmware through TWRP: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I updated fine B368 to B369 using it.
If you want to keep TWRP, take twrp image and place it in the same folder as HuRupdater.zip and name it recovery.img

ante0 said:
Try this tool to install firmware through TWRP: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I updated fine B368 to B369 using it.
If you want to keep TWRP, take twrp image and place it in the same folder as HuRupdater.zip and name it recovery.img
Click to expand...
Click to collapse
Is not there a way to restore mate9 via usb download mode?
if this method does not work, because hwota8 does not recognize any more.
I think this B396 ROM corrupted something on the phone.

mate9 enter in download mode...but no have a software for put firmware in mate9 with USB ??

same problem, stuck at bootlop, keep on restart, tried hwota method, fastboot method, twrp method, all end up with error,installation failed, I think Huawei did something secret on data encryption. lastly I sent to the Huawei service centre, format to stock rom. cost me about 20 dollar.