Related
Hi,
Can anyone please advise as to how to completely remove Solitaire from my XDA2i?
My eldest plays with it constantly until the battery starts beeping, then, bless the little sod, she switches it off and doesn't tell me!
Lost count of the number of times i've slept in due to battery failure....
Hi Chris,
Several things you can do:
a) removing it completely (as you requested),
b) remove the shortcut from the program menu (so unless your little treasure knows how to navigate via file explorer it will look as if it has been removed... but you'll still be able to play it),
c) rename the shortcut/ exe and change it's icon (so you'll know where it is but little treasure won't) and finally
d) password protect it so only you have access.
I'll answer a) but get back to me if any of the other options are of interest.
a) Complete Removal:-
1. use file explore to get to the folder "My Device\Windows"
2. scroll down until you see "solitare" (there may be two files, one will be the exe (the program itself) and ought to be about 50k in size and another which is simply a short cut file (lnk) to the exe). Delete both (i.e. tap and hold will bring up a menu and select delete from it) though actually only deleting the exe alone is sufficient to stop the app from being used.
3. Navigate to "My Device\Windows\Start Menu\Programs\Games" and delete anything which says "solitare" etc (it'll prob be a link file/ short cut file c 15b in size which simply points to the exe file you deleted in 2 above). This will remove solitaire from being seen in the start menu /any screens where you would normally start it from.
Hope that helps.
Mallow1
That's great advice, except your answer is wrong.
SOLITAIRE.EXE and SOLITAIRE.LNK are ROM files, and cannot be deleted.
They can, however, be overwritten by files in the same directory.
You will need a decent File Explorer (Total Commander/Resco).
Create a new note, with some text in it, doesn't matter what, just one character will do to save memory.
Rename this file SOLITAIRE.EXE and move it to the \WINDOWS directory.
The other solution that will actually remove the file involves reflashing with a modified ROM, but that is more trouble than passwording the device ...
This answer is wrong as well. Soon as you remove fake file from /Windows directory, the previous one appears again.
Hey all, I'm fairly new to modifying my diamond, I know about cab files, and how you just drag into internal storage. but what do I do with zip files? the only time I've been able to do something with one was when I opened it and there was a cab file inside. but what do I do with a zip file to get the files onto my phone? thanks
also, I have rom version 1.09 on my phone, i'm pretty sure there's a new version available? would that be the same thing as flashing the phone, or is that just an update you do somehow. thanks
Updating your software to a new version is called flashing, whether you do it with an official ROM or a cooked ROM.
About your question:
If you download a .zip file, just open it on your pc with a program like winzip or winrar and the content of the zip file will be extracted to your computer. Just copy those file(s) to your phone and use them, easy as that!
Zipping a file just makes it smaller, so its less heavy to download for people with a slow internet-connection. A zip file alone isn't a program or something, it just contains other files in a smaller form.
whis said:
Updating your software to a new version is called flashing, whether you do it with an official ROM or a cooked ROM.
About your question:
If you download a .zip file, just open it on your pc with a program like winzip or winrar and the content of the zip file will be extracted to your computer. Just copy those file(s) to your phone and use them, easy as that!
Zipping a file just makes it smaller, so its less heavy to download for people with a slow internet-connection. A zip file alone isn't a program or something, it just contains other files in a smaller form.
Click to expand...
Click to collapse
so how do you install a zip file as a program not just as an app in a folder?
cool, thanks whis that helps
edit: do you just drag the files into internal storage? I dont understand what I do with all of the individual files when they are on my phone. for instance, i'm trying to get a diamond theme for s2u2, and I have all the individual files on my phone, wallpapers and templates and such, than what do you do with them?
can anybody help me
same problem here! did you get it figured out?
no i still have no idea what to do with zip files, unless there are cabs only inside them. haha please help! I know why so many apps on here are zips, just don't know how to use them
MDtouchDiamond said:
cool, thanks whis that helps
edit: do you just drag the files into internal storage? I dont understand what I do with all of the individual files when they are on my phone. for instance, i'm trying to get a diamond theme for s2u2, and I have all the individual files on my phone, wallpapers and templates and such, than what do you do with them?
Click to expand...
Click to collapse
Typically theme files for s2u2 (and most other apps) will need to go in a sub folder of the program's folder in program files.
For example when you install s2u2 there is a directory created on the device as follows: /My Device/Program Files/S2U2/gfx
So you would put the files from the .zip in that folder if they are for themes.
I think this is what you were asking. Each program is different and may or may not have a folder for themes. Its best to ask about that from the individuals that develop or provide the program.
Hope this helps!
powe that helps a little bit. So say in that gfx folder for s2u2, you have all those individual files, wallpapers, clocks, ect...how would I go about applying that to s2u2? I guess thats my main question, I can see where all the files are on my phone from the zip, don't know how to use each of them
Hi, I have a folder with a couple of folders in it that each contain a whole lot of files. I want to cook this folder (with its subfolders) in a rom and place it in the device root folder.
I wonder if there is a utility that can automatically generate a app.dat file from this folder?
Why not Zip it up with an unkown extension, then unzip with Mort (can handle unkown zip extensions).
Using initflashfiles file operations slows up filesystem.
(using unkown filetypes and folders does not)
Sorry if i sound like a broken record to some.
appelflap said:
Hi, I have a folder with a couple of folders in it that each contain a whole lot of files. I want to cook this folder (with its subfolders) in a rom and place it in the device root folder.
I wonder if there is a utility that can automatically generate a app.dat file from this folder?
Click to expand...
Click to collapse
you could make a cab with wince cab mgr(it supports drag n drop of folders) then convert the cab to ext pkg or run it in customization.
twopumpchump said:
you could make a cab with wince cab mgr(it supports drag n drop of folders) then convert the cab to ext pkg or run it in customization.
Click to expand...
Click to collapse
Brilliant! Thanks
twopumpchump said:
you could make a cab with wince cab mgr(it supports drag n drop of folders) then convert the cab to ext pkg or run it in customization.
Click to expand...
Click to collapse
For a more Freeware solution (but without the easier Drag and Drop support)
http://forum.xda-developers.com/showthread.php?t=530710
Extenddir Cab Maker.
Noonski said:
For a more Freeware solution (but without the easier Drag and Drop support)
http://forum.xda-developers.com/showthread.php?t=530710
Extenddir Cab Maker.
Click to expand...
Click to collapse
Thanks, fortunately wince cab maker has a generous trial period. For that one time I have to put all copilot map files in a cab, it is the best option. Thanks anyway
Cabs suck, they're a pain in the butt to make and take forever to install. Just do what Noonski said and make a zip file. They install in seconds, whereas big cabs can take minutes. Here's the basic format I use; this zip file goes to the device root, which is what you want (you need the right # of \'s to get it to work). First, I have a zip file named 'root.zip'. Then, I name the mortscript Unziproot.mscr. Here's the script:
Code:
UnZipALL("\Windows\root.zip","\\")
To get it to execute, I add this to an add2config.txt file:
Code:
EXEC:\WINDOWS\Unziproot.mscr
Zip files are a helluva lot easier to make than cabs; I do it all the time with total commander on the device, and it takes just a few seconds. They're trivial to edit, too. I've attached a zip file that has the add2config.txt, the mortscript, and also a simple mortscript package that works well. Seriously, just listen to Noonski.
Edit: Make sure the mortscript doesn't have any spaces in it. If you name it "Unzip root.mscr", it won't run during customization (been there, done that, lol).
Hey Noonski.. how about we make a script, or an executable that we can plug in a kitchen batch file right before IMGFS gets created, that can look at at an initflashfiles.dat, analyze it, line by line, then create a zip with all the files its supposed to move then copy an almost blank initflashfiles.dat back in the "dump" directory. We could even do this in mort for windows!
NRGZ28 said:
Hey Noonski.. how about we make a script, or an executable that we can plug in a kitchen batch file right before IMGFS gets created, that can look at at an initflashfiles.dat, analyze it, line by line, then create a zip with all the files its supposed to move then copy an almost blank initflashfiles.dat back in the "dump" directory. We could even do this in mort for windows!
Click to expand...
Click to collapse
TPC mentioned doing something like that in the extendir thread. I will say this, I've tried to install my entire start menu with a zip file, and the bugger wouldn't work. The script worked fine after bootup, but it wouldn't run during customization. I don't know what the deal was. I only tried it a couple of times, though, but I don't think that I just did something really dumb.
Farmer Ted said:
TPC mentioned doing something like that in the extendir thread. I will say this, I've tried to install my entire start menu with a zip file, and the bugger wouldn't work. The script worked fine after bootup, but it wouldn't run during customization. I don't know what the deal was. I only tried it a couple of times, though, but I don't think that I just did something really dumb.
Click to expand...
Click to collapse
That should be an easy thing to fix...
yeah i have actually made zips for every file that goes somewhere besides windows, you wont believe the amount of space this saves and how much faster your rom is it is alot of work, one way that makes it a lil easier is to make a list of all the files that are in your zips then have your .bat delete them from dump before imgfsfromdump.exe runs in kitchen....but we could do it better and easier im sure if we just all put our heads together
Wow good idea, that's taking it into a whole new level, automating it.
It's about time this method creeped it's way from the method of a few to something that everyone can take advantage of.
It's one of the most underused methods for a bit more speed, instead of improving filesystem cache settings, reducing the stress on the file system.
(totally made the above up, I just threw a few interesting words i have been reading here and there, before people start thinking I actually understand the file system at a low level) I just know from experience and just doing it that there's advantages.
It's batching beyond my expertise (low level but creative ).
But i'm pretty sure there's a few good men for the job.
HowdyKeith and RoryB come to mind when it comes to Mort Syntax and reading values from files.
Their Batching knowledge should also be good.
But if this is do-able, then why not also not try to get rid of .provxml files to, and speed up the first boot time. Provxml is the second killer of speedy first boots.
Noonski said:
Wow good idea, that's taking it into a whole new level, automating it.
It's about time this method creeped it's way from the method of a few to something that everyone can take advantage of.
It's one of the most underused methods for a bit more speed, instead of improving filesystem cache settings, reducing the stress on the file system.
(totally made the above up, I just threw a few interesting words i have been reading here and there, before people start thinking I actually understand the file system at a low level) I just know from experience and just doing it that there's advantages.
It's batching beyond my expertise (low level but creative ).
But i'm pretty sure there's a few good men for the job.
HowdyKeith and RoryB come to mind when it comes to Mort Syntax and reading values from files.
Their Batching knowledge should also be good.
But if this is do-able, then why not also not try to get rid of .provxml files to, and speed up the first boot time. Provxml is the second killer of speedy first boots.
Click to expand...
Click to collapse
it would be awesome to have a tool that reads initflashfiles.dat from dump, puts all the files that go in other folders besides windows in a zip file also would be nice to be able to select a list of files to go into extendir\windir as well.
Noonski said:
Why not Zip it up with an unkown extension, then unzip with Mort (can handle unkown zip extensions).
Using initflashfiles file operations slows up filesystem.
(using unkown filetypes and folders does not)
Sorry if i sound like a broken record to some.
Click to expand...
Click to collapse
Hi Noonski, I think these are really great ideas. One question about your comment on iniflashfiles slowing down the system, are you referring to the startup time on first boot? Because I fail to see where the speed would be effected in general terms as the only function of the iniflashfiles is to specify where files get placed other than windows. Once they are moved in to the correct places the files is useless. So I don't see how the speed could be any different than with a zip other than the customization time being reduced. Of course I could be wrong. lol
Meant it more in the way that you then do not actually need that file to be in Rom, and therefore in the Windows folder. That's where i meant the most gain was.
Not sure if there's any other extra difference between a file that has been copied from Windows to a sub-folder or an extracted one, other then that it won't be read only and not present in Windows.
Well if you have a zip file with folders and files inside that folders
and you make a script that copies these folders to the corresponding dirs on the device you accomplish what you are asking here isn't?
twopumpchump said:
it would be awesome to have a tool that reads initflashfiles.dat from dump, puts all the files that go in other folders besides windows in a zip file also would be nice to be able to select a list of files to go into extendir\windir as well.
Click to expand...
Click to collapse
Hmmm if every file in a rom was moved without leaving a copy on the windows root I wonder how many files would be eliminated. Im guessing quite a few. Im thinking the only way this would work would be for a mod to be made for EVK allowing all the initflashfiles.dat info and app.dat info to be compiled and a zip created from them.( Not sure a simple zip could properly place that many files?) Then the files placed inside the zip would need to be deleted before the rom is compiled. Theoretically I think its possible.
@L26
Yeah your right. However I think the biggest thing to look at is there a easier way than doing it all by hand It would take forever to take every file moved by the .dat files and make a zip. Not to mention updating the files for new versions would be a PITA
aruppenthal said:
Hmmm if every file in a rom was moved without leaving a copy on the windows root I wonder how many files would be eliminated. Im guessing quite a few. Im thinking the only way this would work would be for a mod to be made for EVK allowing all the initflashfiles.dat info and app.dat info to be compiled and a zip created from them.( Not sure a simple zip could properly place that many files?) Then the files placed inside the zip would need to be deleted before the rom is compiled. Theoretically I think its possible.
Click to expand...
Click to collapse
amazing, check my post and scripts in this same forum ... I was trying to do the same (only with shortcuts for now): cook shortcuts without leaving double files in windows folder, so I remove all shortcuts from the kitchen and once cooked I create the provxml with mortscript reading an ini file and inject the provxml files to the kitchen and the cook again. Of course I only include files present in the ROM. How can I avoid cooking twice?. the script also zips and copies all the files that will be needed for the scripts that run at first boot, including the files only if the modules are in the kitchen.
May be a mod in EVK to runwait scripts before creating the nbh could open a lot of new ways of cooking without using windows directory.
@noonski, do you care taking a look at my script building the provxml file? I am pretty sure you will have lots of suggestions on how to progress further.
cruiserrr said:
amazing, check my post and scripts in this same forum ... I was trying to do the same (only with shortcuts for now): cook shortcuts without leaving double files in windows folder, so I remove all shortcuts from the kitchen and once cooked I create the provxml with mortscript reading an ini file and inject the provxml files to the kitchen and the cook again. Of course I only include files present in the ROM. How can I avoid cooking twice?. the script also zips and copies all the files that will be needed for the scripts that run at first boot, including the files only if the modules are in the kitchen.
May be a mod in EVK to runwait scripts before creating the nbh could open a lot of new ways of cooking without using windows directory.
@noonski, do you care taking a look at my script building the provxml file? I am pretty sure you will have lots of suggestions on how to progress further.
Click to expand...
Click to collapse
isnt the simplest way just to go to your windows folder on your phone and copy Start Menu folder to your pc, create a list of the files that are in that folder and use .bat to delete them while cooking, zip that folder up and put it in kitchen or sdcard and use .mscr to unzip to windows directory at first boot? you only have to cook once this way
twopumpchump said:
isnt the simplest way just to go to your windows folder on your phone and copy Start Menu folder to your pc, create a list of the files that are in that folder and use .bat to delete them while cooking, zip that folder up and put it in kitchen or sdcard and use .mscr to unzip to windows directory at first boot? you only have to cook once this way
Click to expand...
Click to collapse
well, do not want to go offtopic of this post. The idea is to cook automatically with no errors. My method cooks only what is needed without putting files to windows folder. Basically I only have to run twice when changing modules included. If it is only about changing icons, order, etc I simply run the script and cook. If it is about customization I would certainly do like you say (I have done it many times in the past). If it is about cooking should be more automated. Is complex to build but now I only define the INI files parameters: icon, parameter, folder, order... (I have not touched the mortscript since I completed it). Anyway, my building method as its own post. I just found similar ideas behind in this thread and tought they could converge.
I tried to keep the title as descriptive and short as possible, I hope it makes sense
I picked up the kitchen of nhathoa (a retired Topaz cook) hoping to get it customized to make it exactly the way I want but I'm running into some issues.
Long story short, I'm using Ervius Visual Kitchen (1.8.2) and I noticed that the EXT packages I added end up leaving two copies of the files, a copy under \windows\ and another one in the places I specified using app.dat using:
Code:
Directory("\Program Files\bla\"):-File("bla.exe","\Windows\bla.exe")
Is there some way to get rid of the copy under \Windows\ ??
I know that I could simply leave everything there and discard the app.dat files but I would really prefer having everything organized properly (I have a bit of an OCD when it comes to organizing everything neatly ).
I'm pretty sure that this is a rather simple and noobish issue but I couldn't find anything relevant by searching and I took a look at some ext packages by various cooks and noticed the same behaviour.
MusikMonk said:
I tried to keep the title as descriptive and short as possible, I hope it makes sense
I picked up the kitchen of nhathoa (a retired Topaz cook) hoping to get it customized to make it exactly the way I want but I'm running into some issues.
Long story short, I'm using Ervius Visual Kitchen (1.8.2) and I noticed that the EXT packages I added end up leaving two copies of the files, a copy under \windows\ and another one in the places I specified using app.dat using:
Code:
Directory("\Program Files\bla\"):-File("bla.exe","\Windows\bla.exe")
Is there some way to get rid of the copy under \Windows\ ??
I know that I could simply leave everything there and discard the app.dat files but I would really prefer having everything organized properly (I have a bit of an OCD when it comes to organizing everything neatly ).
I'm pretty sure that this is a rather simple and noobish issue but I couldn't find anything relevant by searching and I took a look at some ext packages by various cooks and noticed the same behaviour.
Click to expand...
Click to collapse
No, it's call Read-Only-Memory (ROM) and is the reason you can hard-reset your phone. Every file you cook into the ROM is in \windows. Two ways I know of to reduce the amount of files would be to zip them and have a mortscript unzip them to the proper location during customization or cook in a cab containing all of the files and have it run during customization.
That makes a lot of sense, I really feel ashamed that I didn't figure it out earlier
EXT packages seemed easier than bothering to read about customization but I guess it's time to start reading about this kind of stuff.
Thread marked as solved.
Thanks for the quick reply!
Yup, files in rom are in rom forever, or until you flash again, lol. The trick is to just run bla.exe from \windows. I would say that 90% of the time, bla.exe runs just fine out of the windows directory (especially if it's the only file in the package). When people create cabs, they naturally install the app in \program files, but in general apps don't need to be in a specific folder. If there are other files present, usually an .exe will search within its own folder for those files. So, if you just cook everything straight into windows, you'll be good to go. It's easy enough to test: just move all the files from program files to windows after installing a cab, fix the shortcut in the start menu, and then try to run the app. It's always a good idea to do a soft reset and try again (found this out the hard way many times). The one thing you have to watch out for is settings files, like .dat files. These files frequently have to be archived (not read-only). Particularly with apps that use net 3.5, if there's a setting file that is read-only, the app won't boot and you'll get an error message. The fix is to name the file settings-1.txt (or whatever) and have an app.dat rename it to settings.txt (and keep it in \windows).
Also, remember to fix the shortcut path in the start menu, and examine the registry entries to see if there are any paths for files present-you may need to change them to point to \windows (this could also be true in settings files).
mwalt2 said:
No, it's call Read-Only-Memory (ROM) and is the reason you can hard-reset your phone. Every file you cook into the ROM is in \windows. Two ways I know of to reduce the amount of files would be to zip them and have a mortscript unzip them to the proper location during customization or cook in a cab containing all of the files and have it run during customization.
Click to expand...
Click to collapse
This actually made me think a little bit. When you think about read only, I always thing can't delete or overwrite. Obviously I can run a cab and replace a file that is located in the \Windows directory, that leads me to believe there is a way to delete a file or maybe even replaced with an empty file of the same name.
You can over-write a rom file, but the rom file is still there. The file system just flags it somehow or another and tells the device to ignore it and instead use the new file.
TMartin03 said:
This actually made me think a little bit. When you think about read only, I always thing can't delete or overwrite. Obviously I can run a cab and replace a file that is located in the \Windows directory, that leads me to believe there is a way to delete a file or maybe even replaced with an empty file of the same name.
Click to expand...
Click to collapse
The new file you copy over goes into the "user" partition of the file system and windows knows to use that file instead. Once you delete this newly copied file from \windows, the old one from the ROM will take its place back in the filesystem.
Farmer Ted said:
Yup, files in rom are in rom forever, or until you flash again, lol. The trick is to just run bla.exe from \windows. I would say that 90% of the time, bla.exe runs just fine out of the windows directory (especially if it's the only file in the package). When people create cabs, they naturally install the app in \program files, but in general apps don't need to be in a specific folder. If there are other files present, usually an .exe will search within its own folder for those files. So, if you just cook everything straight into windows, you'll be good to go. It's easy enough to test: just move all the files from program files to windows after installing a cab, fix the shortcut in the start menu, and then try to run the app. It's always a good idea to do a soft reset and try again (found this out the hard way many times). The one thing you have to watch out for is settings files, like .dat files. These files frequently have to be archived (not read-only). Particularly with apps that use net 3.5, if there's a setting file that is read-only, the app won't boot and you'll get an error message. The fix is to name the file settings-1.txt (or whatever) and have an app.dat rename it to settings.txt (and keep it in \windows).
Also, remember to fix the shortcut path in the start menu, and examine the registry entries to see if there are any paths for files present-you may need to change them to point to \windows (this could also be true in settings files).
Click to expand...
Click to collapse
First of all, a small question about the underlined part, just to make sure that I got it right: it won't be exactly a rename just a copy with a different name, correct?
Some of the apps I use need a specific directory structure for the resources and files they use, so just dumping them in one big folder won't work.
Another possible issue that I think I'll run into is having two files sharing a generic name (let's say settings.xml) while each belongs to a different app. I didn't personally encounter such a situation just yet but my packages are still a work in progress and I did see a post or two about this while searching.
I was still hoping there would be a simple way to arrange the files in folders while keeping them under \windows\ but I can't find such a method either. Doesn't seem like I have other options than to decided on a firstboot customization method: Runcc, autorun, xda_uc or something that I haven't read about yet...
"Runcc" is currently used in the base kitchen so that gives it an edge right now.
Edit:
Remembered that I had another question, and it's probably not worth a new thread.
I was looking at how to manually create .lnk files and I noticed something that I didn't understand and couldn't find info about.
For example:
Code:
21#"\Windows\MSDict.htm"
What exactly does the "21" refer to?? I tried changing it randomly to other values a couple of times and it didn't effect anything.
NRGZ28 said:
The new file you copy over goes into the "user" partition of the file system and windows knows to use that file instead. Once you delete this newly copied file from \windows, the old one from the ROM will take its place back in the filesystem.
Click to expand...
Click to collapse
Ok now that makes a lot of sense. I guess I'm just use to Android and being able to see that separate partition. Thanks for the explanation.
That sort of leaves me to another question. Can't someone develop a way to overwrite directly to the "system" partition? It would almost be like a root/superuser for WinMo.
Sent from my HTC Evo 4G!
MusikMonk said:
First of all, a small question about the underlined part, just to make sure that I got it right: it won't be exactly a rename just a copy with a different name, correct?
Click to expand...
Click to collapse
Yup, that's correct. Another approach is to take all similar files that go into windows and stick them in a zip file that unzips to the windows directory. I do that in a few cases (power radio comes to mind; it has an ini file). What I do in most cases though is use a backup/restore mortscript. The backup copies all settings files (and similar things) on my device to my sd card. During customization, the restore copies them back. It's convenient for apps where I change the settings a lot and I don't want to have to constantly fuss with the packages.
Some of the apps I use need a specific directory structure for the resources and files they use, so just dumping them in one big folder won't work.
Click to expand...
Click to collapse
What you do in that case is move the sub-folders into windows. In this case, I'll use a zip file to unzip those folders into windows. Using app.dat files to copy large numbers of files blows. It increases the rom file count as well as the storage used. A zip file is a single file, and usually it saves space.
Another possible issue that I think I'll run into is having two files sharing a generic name (let's say settings.xml) while each belongs to a different app. I didn't personally encounter such a situation just yet but my packages are still a work in progress and I did see a post or two about this while searching.
Click to expand...
Click to collapse
In that case, you're screwed unless there's a registry key that lets you change the name. I've run into a few complications; tcpmp and OMarket both use a common.dll. My solution was to buy Core Player, lol.
I was still hoping there would be a simple way to arrange the files in folders while keeping them under \windows\ but I can't find such a method either. Doesn't seem like I have other options than to decided on a firstboot customization method: Runcc, autorun, xda_uc or something that I haven't read about yet...
"Runcc" is currently used in the base kitchen so that gives it an edge right now.
Click to expand...
Click to collapse
Using cabs or zip files is the way to go if you want to copy large folders in one shot (with a mortscript; you can also un-rar rar files, but I don't know how. Yet, lol). Zips are easier to make and edit than cabs, but you need to have mortscript cooked in and know how to write the simple script (aka cut-and-paste).
Edit:
Remembered that I had another question, and it's probably not worth a new thread.
I was looking at how to manually create .lnk files and I noticed something that I didn't understand and couldn't find info about.
For example:
Code:
21#"\Windows\MSDict.htm"
What exactly does the "21" refer to?? I tried changing it randomly to other values a couple of times and it didn't effect anything.
Click to expand...
Click to collapse
The 21 is the number of bytes after the #. It doesn't matter. I usually just change the first number to 1. It works fine. Counting bytes blows.
That was extremely helpful. Too bad these boards don't use a rep system
Farmer Ted said:
Yup, that's correct. Another approach is to take all similar files that go into windows and stick them in a zip file that unzips to the windows directory.
Click to expand...
Click to collapse
Well, if I'm going to follow this method, and it seems like I am, I don't see why I would still have to limit myself to the \windows folder. I can just put everything the way I originally wanted to do. I only looked at arranging files under \windows when I found out that there's no way to get rid of the duplicates.
Farmer Ted said:
Using cabs or zip files is the way to go if you want to copy large folders in one shot (with a mortscript; you can also un-rar rar files, but I don't know how. Yet, lol). Zips are easier to make and edit than cabs, but you need to have mortscript cooked in and know how to write the simple script (aka cut-and-paste).
Click to expand...
Click to collapse
I haven't tried writing mortscripts yet but I've seen enough to figure out the basic and notice how easy it is. I'm gonna check how usable is the WM version of 7zip, as long as it accepts arguments combining it with mortscript will be easy and perfect for me.
7z archives can get smaller in size than half of the zip archives for the same files. And cabs are too annoying to work with and keep updated later on.
Only issue remaining now is checking whether I should put the archived files under \windows or use the sdcard for customization. I'm leaning toward the first but I'll have to wait and see how much memory I would be sacrificing that way.
Farmer Ted said:
The 21 is the number of bytes after the #. It doesn't matter. I usually just change the first number to 1. It works fine. Counting bytes blows.
Click to expand...
Click to collapse
Ah! I thought about counting bytes/characters and noticed that it works sometimes. But I thought it was a coincidence after I experimented in changing the value and noticed that it wasn't always the right count in the .lnk files that I found.
[rant]
Nice, I was messing around with some packages to free up ram and storage and I seem to have ended up with a rather b0rked up xTask. And then there's still convincing Resco Explorer that the registry add-in IS in fact there.
Figuring out the causes should keep me happily busy for a while (and probably heavily pissed for another while afterwards).
[/rant]
Edit:
Just for the record, I ended up using xda_uc it's a lot easier than doing things manually. Although it would help if there was some kind of documentation available, took me a while to understand what .xda, xdai, xdas & .xdaz files are supposed to be.
hi by the way is it possible to convert ext packages of QVGA phones to one another?
Does anyone know how to remove or seperate ringtone/media files from music list in android? I have like over 1000 songs in the list and there are about 400 or more media files from ringtone/media folder and game folder like H.A.W.K... anyhelp is appreciate it..
myowin said:
Does anyone know how to remove or seperate ringtone/media files from music list in android? I have like over 1000 songs in the list and there are about 400 or more media files from ringtone/media folder and game folder like H.A.W.K... anyhelp is appreciate it..
Click to expand...
Click to collapse
1. On your computer, open Notepad or any other text editor
2. Save the blank file as “.nomedia”
Make sure that the Save as type is set as “All Files” instead of “Text documents”
3. Copy that file to the folder on your SD card containing audio files you don’t want to show up.
(Example: If you want to block CoPilot sound files from coming up, place the .nomedia file in the sdcard/copilot folder)
4. Reboot your phone and the files should no longer be viewable
sk0o said:
1. On your computer, open Notepad or any other text editor
2. Save the blank file as “.nomedia”
Make sure that the Save as type is set as “All Files” instead of “Text documents”
3. Copy that file to the folder on your SD card containing audio files you don’t want to show up.
(Example: If you want to block CoPilot sound files from coming up, place the .nomedia file in the sdcard/copilot folder)
4. Reboot your phone and the files should no longer be viewable
Click to expand...
Click to collapse
absolutely brilliant, I've been looking for this answer for ages!
However, there is one thing it doesn't stop for me: I have a folder called Android/cache which is autocreated on reboot (I'm assuming), and my .nomedia file get's deleted with each reboot from that folder. This folder holds all the notifications/ringtones etc that come from HTC Hub. Anyone else experiencing this? Obviously this only really applies to the Desire HD builds.
It works also with graphic files. Great!!!
Now does that .nomedia file need to be placed in the particular folder the image is in or does it work by plaing in the parent folder. I ask because my album art shows up in the gallery and I have roughly 1000 songs, it would be way too much to have to place in each song folder lol
chrisrj28 said:
Now does that .nomedia file need to be placed in the particular folder the image is in or does it work by plaing in the parent folder. I ask because my album art shows up in the gallery and I have roughly 1000 songs, it would be way too much to have to place in each song folder lol
Click to expand...
Click to collapse
yeah, it needs to be in every folder you want to "hide" it doesn't affect child folders.
Reno_79 said:
absolutely brilliant, I've been looking for this answer for ages!
However, there is one thing it doesn't stop for me: I have a folder called Android/cache which is autocreated on reboot (I'm assuming), and my .nomedia file get's deleted with each reboot from that folder. This folder holds all the notifications/ringtones etc that come from HTC Hub. Anyone else experiencing this? Obviously this only really applies to the Desire HD builds.
Click to expand...
Click to collapse
Put one in the Android/root/cache folder, and it'll get copied back on reboot.
Dang, is there an option to copy one file to all folders? lol
jamesjf said:
Put one in the Android/root/cache folder, and it'll get copied back on reboot.
Click to expand...
Click to collapse
I had that idea already lol, for some reason after a reboot tho the file disappears and the cache folder get's emptied then refilled with my notifications but no .nomedia (like a complete refresh but without the file I put in). not a major problem just a bit annoying.
Worked like a charm. Thanks Much Sk0o.