Phone is an HP Elite X3. Randomly got a blue screen that says error 0xc000098 and something about the \BCD file not having operating system information in it. This is after restarting the phone twice after updating it.
It is not possible to put the phone in flash mode, it just brings back the blue screen when restarted. Can't boot to OS.
Any ideas? The computer does not recognize the phone.
dfeldt91 said:
Phone is an HP Elite X3. Randomly got a blue screen that says error 0xc000098 and something about the \BCD file not having operating system information in it. This is after restarting the phone twice after updating it.
It is not possible to put the phone in flash mode, it just brings back the blue screen when restarted. Can't boot to OS.
Any ideas? The computer does not recognize the phone.
Click to expand...
Click to collapse
Any luck ?
same here...no combination of keys work..reboot loop
Related
I was wondering if anyone here knows of a way to unbrick an Expo.
Just got phone today and was flashing the lastest dragonstorm rom onto it when My computer crashed and I recieved a blue screen. Now when I push the power button the green light and the backlight turn on but the scren stays blank. Have tried re-flashing with both the LG update rom and the dragonstorm one but the only effect is occasionaly the 'Emergancy download' message comes on and stays on until I pull battery out.
Have you tried flashing with a different computer? was your computer running vista?
No. My computer is Windows 7. Have tried flashing on a laptop running Xp but the dragonstorm rom comes up with a message saying can not read whats on phone. Have also tried with the base rom and update rom but both go right through and say update complete but the phone is still the same.
My phone is "bricked", it won't load into the orange windows logo screen anymore, just LG logo and turn lcd off, that's it. Help
Try, Power on + space key, then you should see "emergency download".
And then try reflash phone.
up help then....
Hi Guys,
I was in the middle of flashing my OMNIA 7 then suddenly my computer shutdown due to a blackout at our home. Now my phone is stuck on the OMNIA 7 logo during boot and keep going that way.
I could still manage to go to download mode and reflash but when I try to flash it there is an error that would indicate "WRITE MIBIB FAILED!"
Is my phone bricked? I need your help.
By the way, if I get still manage to go to the DOWNLOAD MODE would that mean that my phone is not bricked?
Thanks!
Have you tryed formating before you try? Just use the other volym button.
Tryed yet?
Yeah I tried it, but still not working. . I still manage to get to "download mode" though.
As I have read through the different posts in the forum I see people experiencing the same problem such as the phone which keep on restarting and stuck on the "OMNIA 7" startup logo. . I tried the fixes that other's recommended but still doesn't work.
I tried taking the battery out for a day then putting it back in, the phone managed to boot up and I was actually able to use it but if I try to restart it again or sync it to the computer, It suddenly resets then goes on the boot loop once again. .
Well then I guess there is only one way. Return it to the store. :'(
to flash, ALWAYS restart your computer before and use a laptop with charged battery to avoid this problem.
For your problem you can tried to flash only bootloader part, radio part, or only PDA part for testing.
hay man
I had the same problem and here is the solution
follow the this link http://support.microsoft.com/kb/2530409/en-us
it works 100%
I hope it works with you as well
Nice one Abd654. Hope that helps you bor. GL
I have a problem getting in to "Connect to PC" I followed the instructions on holding the power and camera buttons, etc. but it won't go to "connect to pc" screen. . it's just keeps on flashing the "Samsung Omnia 7 logo" on the screen everytime I turn it on.
I tried doing hard reset but I cant because once the hard reset screen shows up, the phone just restarts again then the start up loop happens again. .
try this one this is from microsoft answer
http://support.microsoft.com/kb/2547687/en-us
Background: I bought this phone on ebay mainly for development testing of apps. The seller has a high reputation and said that the device would boot to the insert sim card prompt. Upon receiving the phone it always boots to the download mode, I am new to Windows Phone 7, I tried to get it to hard reset, I downloaded Samsung-i917-Focus-firmware-UCJK2-ATT-USA.exe extracted the files and installed the usb drivers. The 7.05 version of the program runs copying files to the phone and you can see a progress bar at the bottom of the download mode screen. When it gets to the end and reboots it immediately goes back to the download mode screen and from videos I have found it should go to a transfer screen. The program does still go with the rebuilding part but the phone stays on the download mode screen. I have waited over an hour after the program said it was complete. I have also pulled the battery after a half hour and on pressing power it goes back to the download mode screen. Hardware version 1.3
Any help with this is greatly appreciated.
Hello all,
As fate would have it, the day of me getting my new G5, my G2 went in to a boot loop before I could transfer my data.
I'm desperate to get the data back if possible. Below are the details.
Phone went in to boot loop, then would not turn on. I have tried periodically to turn on the phone, but it will not boot. It will loop at the LG screen and occasionally the Sprint screen. It intermittently charges when connected to power. Today, I hooked up it up to a PC and powered on and got the Demigod screen. Loaded dload mode, but the drivers didn't install. On reboot I got the LG screen with a security error and now it won't power up again.
Any suggestions? Seems like it may be hardware related.
thatguy7 said:
Hello all,
As fate would have it, the day of me getting my new G5, my G2 went in to a boot loop before I could transfer my data.
I'm desperate to get the data back if possible. Below are the details.
Phone went in to boot loop, then would not turn on. I have tried periodically to turn on the phone, but it will not boot. It will loop at the LG screen and occasionally the Sprint screen. It intermittently charges when connected to power. Today, I hooked up it up to a PC and powered on and got the Demigod screen. Loaded dload mode, but the drivers didn't install. On reboot I got the LG screen with a security error and now it won't power up again.
Any suggestions? Seems like it may be hardware related.
Click to expand...
Click to collapse
not familiar with demigod orother stuff, but can you enter into recovery in twrp.? if you can then plug into pc and see if drive appear retreave your data if it does then fix bootloop.
raptorddd said:
not familiar with demigod orother stuff, but can you enter into recovery in twrp.? if you can then plug into pc and see if drive appear retreave your data if it does then fix bootloop.
Click to expand...
Click to collapse
Doesn't TWRP have to been installed when rooting a device? This device is not rooted.
thatguy7 said:
Doesn't TWRP have to been installed when rooting a device? This device is not rooted.
Click to expand...
Click to collapse
yes i assumed this was rooted and hada custom recovery.. sorry i do not know if theres something you could do..might as well say good bye to your data.. but wait and see if theres a way.. am not familiar with the demigod.
I have a Nokia 6 Model TA-1033
In the middle of an OS update the phone seems to have bricked itself. When I power on the device it gets stuck on the powered by android screen and goes no further. Even with phone plugged into a charger no recharging icon is shown.
When I go into recover mode and select factor reset I get an error message "failed to find a device for partition system"
Is the phone bricked or is there some way to flash a new stock rom?
Many thanks
Is there a ROM I can put on the SD card and then install from card via the boot loader. I have been searching from a file to download but cant find anything for a TA-1033.
Many thanks
Pete917 said:
I have a Nokia 6 Model TA-1033
In the middle of an OS update the phone seems to have bricked itself. When I power on the device it gets stuck on the powered by android screen and goes no further. Even with phone plugged into a charger no recharging icon is shown.
When I go into recover mode and select factor reset I get an error message "failed to find a device for partition system"
Is the phone bricked or is there some way to flash a new stock rom?
Many thanks
Click to expand...
Click to collapse
Did it happen while installing april patch ?
Sent from my Nokia 7.1 using XDA Labs
Yes it happended wit the last OTA update.
Now when I beet it goes to the powered by android screen, but when I try to get it into bootloader the android bot flashes on screen then dissapears.