Fingerprint or Utouch is not working - Zuk Z1 Q&A, Help & Troubleshooting

Finger Print was working like charm in Nuclear 6.0 then suddenly stopped. No error at all and Fingerprint option is also gone! Formatted and reinstalled Nuclear but still no option available and no utouch is their. Installed MiUi same problem. What should i do?:crying:

Anas_hani_007 said:
Finger Print was working like charm in Nuclear 6.0 then suddenly stopped. No error at all and Fingerprint option is also gone! Formatted and reinstalled Nuclear but still no option available and no utouch is their. Installed MiUi same problem. What should i do?:crying:
Click to expand...
Click to collapse
I had the same issue, try the clean install of teslacoil ROM it could solve the problem

I report the same problem.
First of all, Fingerprint was not always responsive, many times i get an error which tell me that Fingerprint hardware not available but quickly it get back to work. but since today morning, it don't work anymore. i made a full reset , i installed CM 12.1 , CM13 , CM14 and even Zui 2.5 thinking that it could be a software Error. but it still don't work. Unfortunately, I think that my sensor is dead :/
Lenovo disappointed me. Zéro support for our device

Worked fine for me for along time..
Radhouene90 said:
I report the same problem.
First of all, Fingerprint was not always responsive, many times i get an error which tell me that Fingerprint hardware not available but quickly it get back to work. but since today morning, it don't work anymore. i made a full reset , i installed CM 12.1 , CM13 , CM14 and even Zui 2.5 thinking that it could be a software Error. but it still don't work. Unfortunately, I think that my sensor is dead :/
Lenovo disappointed me. Zéro support for our device
Click to expand...
Click to collapse
For me it was working great for past 6 months! but from past 5 days it was showing Fingerprint hardware not available few times! and then suddenly stopped working! no response at all. installed many roms still no response.. but now i installed 12.1 official and when i'm trying to add fingerprint its giving me a non stop vibration and still its not working.

Anas_hani_007 said:
For me it was working great for past 6 months! but from past 5 days it was showing Fingerprint hardware not available few times! and then suddenly stopped working! no response at all. installed many roms still no response.. but now i installed 12.1 official and when i'm trying to add fingerprint its giving me a non stop vibration and still its not working.
Click to expand...
Click to collapse
A lot of people here encountered the same error.
I think that it's a hardware issue. Fingerprint is dead.

Damn!
Radhouene90 said:
A lot of people here encountered the same error.
I think that it's a hardware issue. Fingerprint is dead.
Click to expand...
Click to collapse
i don't why i bought this piece of crap!

Nope
Jeanguillemont said:
I had the same issue, try the clean install of teslacoil ROM it could solve the problem
Click to expand...
Click to collapse
Doesn't work at all...

Related

Compass not working properly on CM11S

Hi everyone,
After long time reading Xda and finding solutions to my problems today I finally post here because I haven't been able to solve this problem.
I am trying the Cyanogen 11S rom from euMIUI
Everything works great, the only issue is that the compass is not working properly. It just points kind of 90 degrees to the left of what it should (sometimes this also changes). I'm using the HM2014813 and compass works in MIUI 7.
I have tried calibrating with different apps. Been researching several ways to fix this but no success so far. Tried to copy the files who I thought control the compass from MIUI 7 to my CM11S (located in system/bin, system/etc/permissions and system/lib).
Any ideas?
Thanks
colibris79 said:
Hi everyone,
After long time reading Xda and finding solutions to my problems today I finally post here because I haven't been able to solve this problem.
I am trying the Cyanogen 11S rom from euMIUI
Everything works great, the only issue is that the compass is not working properly. It just points kind of 90 degrees to the left of what it should (sometimes this also changes). I'm using the HM2014813 and compass works in MIUI 7.
I have tried calibrating with different apps. Been researching several ways to fix this but no success so far. Tried to copy the files who I thought control the compass from MIUI 7 to my CM11S (located in system/bin, system/etc/permissions and system/lib).
Any ideas?
Thanks
Click to expand...
Click to collapse
Hey bro, are you a kitkat lover? If not, i recommend you to migrate to marshmallow. It's MM time man. For now, MM roms has good development, much much developers support it. Move to the latest CM13 by kumajaya or emfox, its so rock stable n can be use as a daily driver. You can find it at his thread in this forum. Find it and enjoy. Happy flashing!!!!
:laugh: Maybe you're right and I should upgrade... But I liked this rom so much. Very stable and everything worked great for me, except for the compass, and I use my cellphone a lot to go hiking.
Thanks anyway for your answer!
colibris79 said:
:laugh: Maybe you're right and I should upgrade... But I liked this rom so much. Very stable and everything worked great for me, except for the compass, and I use my cellphone a lot to go hiking.
Thanks anyway for your answer!
Click to expand...
Click to collapse
the sensors were broken in older sources,kumjaya had fixed that,changes may not have been added to the build you have been using.try to move to a newer version build.
GeorZ said:
the sensors were broken in older sources,kumjaya had fixed that,changes may not have been added to the build you have been using.try to move to a newer version build.
Click to expand...
Click to collapse
Ok, thanks! Moving to CM13
You were right, guys. In CM13 everything working fine...

First official nightly version of CM14.1

CM14.1 nightly is available now for htc one m8 on CM official website
https://download.cyanogenmod.org/?device=m8
Does it mean that they are no longer working on CM13??
Which mean there is no snapshot version ??
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
i hope so ^^
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
have you tried this cm14.1 nightly is it stable ?
Xhemal1325 said:
have you tried this cm14.1 nightly is it stable ?
Click to expand...
Click to collapse
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Saleen28 said:
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Click to expand...
Click to collapse
Is the same as unofficial, to be perfectly honest.
fizbanrapper said:
Is the same as unofficial, to be perfectly honest.
Click to expand...
Click to collapse
Nuh uh!!!
Its named OFFICIAL!
Previously it was written what doesn't work on the page.
Now nothing is enlisted.
So maybe it's stable.
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
skippydvd said:
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
Click to expand...
Click to collapse
Grab a log. It might help devs to fix this
Waza_Be said:
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Click to expand...
Click to collapse
Are you on GPE firmware? You can use terminal emulator and type:
Code:
su
df
This will tell you sizes of all partitions.
Ok, this was just an issue of CM recovery.
I installed TWRP and everything is fine
problems in cm14.1 htc m8
Hi guys I m having some problems
I have updated to cm 14.1 and it went to an bootloop. So i let battery drains completely then I after charging I wiped everything and then reboot. The phone rebooted and first thing I noticed is that there is no Google app. So i flashed gaps for 7.1 nano package which fixed this.
Now phone is working good though it's having some performance issues like slow keyboard (third party keyboards also), sometimes it heats and sometime it reboot by itself.
There is a major bug u have found
That I can't download messenger from play store it just keeps showing downloading but every other app is down loading fine. Then I went to browser to download some apks but I found that every downloading is failing due to unknown issues.
Then I installed Firefox chrome tried everything but no luck, but uc browser is showing that there is something wrong with SD card but there is no SD card, I have tried with SD card reboot reset everything still no luck. Then I connected it to my pc just to know that it's not even accepting anything from pc also.
It just keep showing copying moving but there is no progress. AND IT also not receiving anything from share it also. I can't even see my whatsapp contacts profiles pics they all are blank I can't download Nothing..
It's like my phone will download only through play Store and it will not accept anything from any other source like pc browser whatsapp hike messenger Facebook share it etc.
Theme store is also Missing.
But I am still able to use my phone as daily driver as it have no issues with sim card radio wifi Camera or anything else other than mentioned Above
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Xtenchen said:
.... comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Xtenchen said:
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
Here too! Omg you are the best ?
ckpv5 said:
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Click to expand...
Click to collapse
Can I ask you where did you go ? You was one of the best devs here. HTC 10 developing or ?
Moderator Information,
Thread has been closed as an official thread by an official maintainer has now been released.

Touch Problem or System error ????

Hey guyss,
I luv zuk z1 and i also install alll sorts of rom in my phone.
now when cynogen was shut i migrated from cm 13 to the nuclear rom 7.1. So presently i am using nuclear rom.
The problem is, if i now flash any other nougat rom such as Unofficial LineageOS 14.1 Nightlies,[OFFICIAL][7.1.1] Official Mokee,[UNOFFICIAL][7.1.1]Resurrection Remix-N v5.8.0-Zuk Z1
When i flashed these three roms the touch is not working
i wil explain, after falshing the first language setup screen appears then when we tap next the touch not working... but when hoding the power key the shutdown reebot option come.. then to shutdown if i touch on shutdown the screen goes and if touching some waht downward of shutdown it will shutdown
But i think it is not the issue of touch because after that i flashed cm 13 and nuclear rom again , no problem the touch works well
Anyone faced the issue ... pls help me
I am flashing it via Team Win
Harijayan994_ said:
Hey guyss,
I luv zuk z1 and i also install alll sorts of rom in my phone.
now when cynogen was shut i migrated from cm 13 to the nuclear rom 7.1. So presently i am using nuclear rom.
The problem is, if i now flash any other nougat rom such as Unofficial LineageOS 14.1 Nightlies,[OFFICIAL][7.1.1] Official Mokee,[UNOFFICIAL][7.1.1]Resurrection Remix-N v5.8.0-Zuk Z1
When i flashed these three roms the touch is not working
i wil explain, after falshing the first language setup screen appears then when we tap next the touch not working... but when hoding the power key the shutdown reebot option come.. then to shutdown if i touch on shutdown the screen goes and if touching some waht downward of shutdown it will shutdown
But i think it is not the issue of touch because after that i flashed cm 13 and nuclear rom again , no problem the touch works well
Anyone faced the issue ... pls help me
I am flashing it via Team Win
Click to expand...
Click to collapse
I had a similar issue, starting like you mentioned and becomes more and more. Then even in twrp no touch was working anymore. At the end it sent it back for warranty...
So Is it the problem with the touch screen .. ?
strongst said:
I had a similar issue, starting like you mentioned and becomes more and more. Then even in twrp no touch was working anymore. At the end it sent it back for warranty...
Click to expand...
Click to collapse
So was it the problem with the touchscreen of the phone..
Harijayan994_ said:
So was it the problem with the touchscreen of the phone..
Click to expand...
Click to collapse
Maybe, idk... I got a new device
strongst said:
Maybe, idk... I got a new device
Click to expand...
Click to collapse
After how much days or months u got this problem ... ? And also from which customer care (place) u got the new device ?
Pls let me know
Harijayan994_ said:
After how much days or months u got this problem ... ? And also from which customer care (place) u got the new device ?
Pls let me know
Click to expand...
Click to collapse
After round about 1.5 years from Amazon Germany and from them also the new device
strongst said:
After round about 1.5 years from Amazon Germany and from them also the new device
Click to expand...
Click to collapse
But offers a 30 day replacement policy right.
Then how did u manage to get a replacement after 1.5 years
Harijayan994_ said:
But offers a 30 day replacement policy right.
Then how did u manage to get a replacement after 1.5 years
Click to expand...
Click to collapse
You're right. I mailed to the Hotline, it was long way but they did it

Touchscreen Problems

Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
johannestheg said:
Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
Click to expand...
Click to collapse
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
strongst said:
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
Click to expand...
Click to collapse
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
johannestheg said:
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
Click to expand...
Click to collapse
I sent it back for warranty.
strongst said:
I sent it back for warranty.
Click to expand...
Click to collapse
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
johannestheg said:
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
Click to expand...
Click to collapse
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Narasimha12 said:
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Click to expand...
Click to collapse
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
johannestheg said:
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
Click to expand...
Click to collapse
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Narasimha12 said:
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Click to expand...
Click to collapse
No didn't ever have this problem before, so thanks for the good news, I'll update after testing
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
johannestheg said:
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
Click to expand...
Click to collapse
Bingo
Sent from my Zuk Z1 using XDA Labs
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
sethnet said:
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
Click to expand...
Click to collapse
Latest lineage OS doesn't have this problem. If you are still getting the touch screen issues, try NucleaRom
Sent from my Zuk Z1 using XDA Labs

Zui 2.3.0 for 3t(6.0.1)

Here is the link for one plus 3t zui 2.3.0
Chinese forum links:-
http://www.oneplusbbs.com/thread-3274469-1-1.html
DOWNLOAD LINK:-
http://Pan.baidu.com/s/1o8jowjC
CONS AND PROS:-
Rom is amazing just having issues like Fingerprint not working no volte working no backlights or on screen keys rest ui and boot time is just awsm if these things gets fix it would be a great rom
A mirror would be great:-
rom is good except fingerprint not working along with home button and call seems to take a lot of time to bring up the Call ui
this is total crap.. the starter said wont fix the bugs .. no more update.. and trust me... bugs all over the rom. DO NOT FLASH !
I never want to flash ROM that coming from Chinese forums. We never know what's included deep inside the ROM.
michael.the.don said:
rom is good except fingerprint not working along with home button and call seems to take a lot of time to bring up the Call ui
Click to expand...
Click to collapse
ah can dev fix it would be great if they can
Mirror Anyone please!!
Dhairya said:
ah can dev fix it would be great if they can
Click to expand...
Click to collapse
Please mirror the rom to mega or Gdrive !! Advance Thanks !!
Rom is amazing just having issues like Fingerprint not working no volte working no backlights or on screen keys rest ui and boot time is just awsm if these things gets fix it would be a great rom
Dhairya said:
Rom is amazing just having issues like Fingerprint not working no volte working no backlights or on screen keys rest ui and boot time is just awsm if these things gets fix it would be a great rom
Click to expand...
Click to collapse
Can you upload the rom to a mirror like Androidfile host or google drive or anything that works in india ?? Please
Can anyone mirror this to google drive or AFH Please !! Thanks in Advance
Dhairya said:
Rom is amazing just having issues like Fingerprint not working no volte working no backlights or on screen keys rest ui and boot time is just awsm if these things gets fix it would be a great rom
Click to expand...
Click to collapse
Then what's left dude..?? Lmao..
Well, I tried flashing this using multirom, flashed fine, clicked reboot system. Bam, phone completely dead. No LED when plugged in, nothing when plugging into laptop. Nothing. Just great.
justin654 said:
Well, I tried flashing this using multirom, flashed fine, clicked reboot system. Bam, phone completely dead. No LED when plugged in, nothing when plugging into laptop. Nothing. Just great.
Click to expand...
Click to collapse
And that's why you don't flash random stuff from sites one can't even read...
Maybe try the unbrick tutorial?
domsch1988 said:
And that's why you don't flash random stuff from sites one can't even read...
Maybe try the unbrick tutorial?
Click to expand...
Click to collapse
I can't help being a flashaholic lol. Unbrick tutorial worked perfectly. Thanks for the heads up

Categories

Resources