Hello respectfull people☺
I've got a headunit unbranded and written on the screen that it's android 4.4 but if I tap on the label android version I discovered that it's android 4.2
Anyway that's not a problem because it works good
My question now is how can I upgrade it to android 4.4 kitkat?
Other question is if I can't upgrade it so can I make a format to the software and install a 4.4 android to replace the 4.2????
Thanks for you all if you helped me in that issue.
Tamer amer said:
Hello respectfull people
I've got a headunit unbranded and written on the screen that it's android 4.4 but if I tap on the label android version I discovered that it's android 4.2
Anyway that's not a problem because it works good
My question now is how can I upgrade it to android 4.4 kitkat?
Other question is if I can't upgrade it so can I make a format to the software and install a 4.4 android to replace the 4.2????
Thanks for you all if you helped me in that issue.
Click to expand...
Click to collapse
No one can help unit youve shown us something that can identify your unit, post a pic of your settings/about screen that shows your MCU type.
What we can say is that if its got an Mstar processor its deffo NOT an MTCB/C head unit, it may be an AN21-U unit, theres a thread for them in the General forum.
I
typos1 said:
No one can help unit youve shown us something that can identify your unit, post a pic of your settings/about screen that shows your MCU type.
Wh
at we can say is that if its got an Mstar processor its deffo NOT an MTCB/C head unit, it may be an AN21-U unit, theres a thread for them in the General forum.
Click to expand...
Click to collapse
informations about the headunit is full AOSP cedric3 on Mstar.. and I will be thankfully if you give me a link to catch any answers from it
I don't know why pictures of the headunit I can't uploaded here
You will have to look for a thread with "AN21-U" in the title in the Android Head Unit General forum (its a very long thread started at least 3 years ago with millions of views) - in order to post a link I would have to look, so you may as well look yourself.
Ok thanks [emoji1] [emoji1]
Sent from my SM-N9005 using XDA-Developers Legacy app
Related
hello guys
i have asked in all the forums about updating my head unit who runs android 4.2.2 to 4.4.4
and i had no luck of gating answers. my question is: is this because it cant be done or what?
please help me
You need to show the proper about screen that shows what MTCD unit you have.
All those screenshots are pretty much useless information which is probably why nobody is answering you.
dtlaon said:
hello guys
i have asked in all the forums about updating my head unit who runs android 4.2.2 to 4.4.4
and i had no luck of gating answers. my question is: is this because it cant be done or what?
please help me
Click to expand...
Click to collapse
You dont have an MTCD unit, as you have an Mstar processor I would guess you ahve an AN21-U, try that thread or the Android headunits general forum.
typos1 said:
You dont have an MTCD unit, as you have an Mstar processor I would guess you ahve an AN21-U, try that thread or the Android headunits general forum.
Click to expand...
Click to collapse
hello! maybe somebody can helps me! i have a HU MTCD_CT_V1.94_1 SOFIA3GR_CAR USERDEBUG 5.1.1 LMY49F eng.htc , quadcore 1.2 with 1 gb ddr and 16 gb internal memory screen resol 1024x600. Are there some mcu uptate for this unit? actualy my unit is on starting loop. someone knows how can i do the Hard reset? Mtcd_ct_v1.94_1 sofia3gr_car
thanks,
canissapiens said:
hello! maybe somebody can helps me! i have a HU MTCD_CT_V1.94_1 SOFIA3GR_CAR USERDEBUG 5.1.1 LMY49F eng.htc , quadcore 1.2 with 1 gb ddr and 16 gb internal memory screen resol 1024x600. Are there some mcu uptate for this unit? actualy my unit is on starting loop. someone knows how can i do the Hard reset? Mtcd_ct_v1.94_1 sofia3gr_car
thanks,
Click to expand...
Click to collapse
Theres a specific thread for MTCD Sofia units, try there.
Dear all
i have PX5 android head unit and its FYT6026 ( not joying android unit ) i have been updated by joying firmware and every things is working fine so far but i got message in the top that UI and MCU do not match ! (JY)
i have been trying many firmware from joying but still this issue not solved
my unit is PX5
Ram 4 GB
Rom 32 GB
could you please help me in this regards
note:
i don't have old firmware for this unit since i am not make backup
here some photo may can help
https://serving.photos.photobox.com...0fd9e504ce405f1ac580d687b354235568a40ad80.jpg
https://serving.photos.photobox.com...9be1e52fea11ed9bbaba7dee2dbaec3fd4ee0493c.jpg
https://serving.photos.photobox.com...b149989dec290c371fd4ca3b6cc959a73c7ac1705.jpg
https://serving.photos.photobox.com...159acce4c1fc379df53bf222710682e9abd8a1712.jpg
https://serving.photos.photobox.com...186de831a5657a4ba432cb21b9001aab648793309.jpg
This is the right way to ask a question. Spamming the forum sucks for everyone. Here check this out for the rest you're on your own coz spamming the forum sucks for everyone.
Dear all,
i have this Funrover head unit, please your help if it possible yo update firmware, actually i have android 8.0 but its very slow and the mirrorlink or Easyconnect wont work on usb type C...
i attached details of my head unit
thank you all, any help please
just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)
dachepo said:
just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)
Click to expand...
Click to collapse
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.
surfer63 said:
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.
Click to expand...
Click to collapse
but in the info says android 8.0
thats not real?
dachepo said:
but in the info says android 8.0
thats not real?
Click to expand...
Click to collapse
What info? From the supplier or the website or on your unit?
I don't see that from your images.
Also: A Sofia running on android 8.0? That would be the first that I know of (but I don't know everything , not by far )
Your 2nd image shows a Bluetooth version of 6.0.1.-23. That version is not correct, but is shows Android 6.0.1 with some kernel version.
Anyway: Even if your Sofia is running Android 8, there is no (custom) firmware available that will allow it to pair with an android phone on 8.x or newer.
Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?
dachepo said:
Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?
Click to expand...
Click to collapse
Probably not. Maybe you can install the gtxaspec custom rom, but only if your funrover is 100% identical with a Joying Sofia (which is possible).
Normally there is a fyt.prop where the company is defined. For Joying that id is 43. So even if you use that custom rom, you first need to change the id in the custom ROM to the Funrover id, otherwise your MCU will give problems.
And even in that case: your android phone 8 will still not be supported in Android auto/Easyconnected.
So my advice: Don't even try that route as you will not have any support.
Go for HUR like I advised in my first post.
Hey All, I have a
32GB A-Sure Android 9.0 VW Golf MK5 MK6 9" Car Head Unit Stereo Sat Nav GPS DAB+
Purchased a few years back, the interface is starting to become sluggish, so was looking to update the firmware.
Is it possible to update to Android 10 on all units. If so, could you point me in the right direction of a website to download the file please.
Thanks in advance!
Daiboy1980 said:
Hey All, I have a
32GB A-Sure Android 9.0 VW Golf MK5 MK6 9" Car Head Unit Stereo Sat Nav GPS DAB+
Purchased a few years back, the interface is starting to become sluggish, so was looking to update the firmware.
Is it possible to update to Android 10 on all units. If so, could you point me in the right direction of a website to download the file please.
Thanks in advance!
Click to expand...
Click to collapse
Updating to yet another stock firmware will not do any improvements on your head unit. There might be custom firmware for your head unit but you need to post a screenshot of your System Info. It will contain your MCU.
ExtremeMOD said:
Updating to yet another stock firmware will not do any improvements on your head unit. There might be custom firmware for your head unit but you need to post a screenshot of your System Info. It will contain your MCU.
Click to expand...
Click to collapse
MCU Version
MTCE_LM_V3.16_1
Model PX30(1024x600)
Daiboy1980 said:
MCU Version
MTCE_LM_V3.16_1
Model PX30(1024x600)
Click to expand...
Click to collapse
Excellent, install Malaysk ROM and never look back
ExtremeMOD said:
Excellent, install Malaysk ROM and never look back
Click to expand...
Click to collapse
Perfec thanks. Will I have to install Andoid 10 first? Currentyl on 9
ExtremeMOD said:
Excellent, install Malaysk ROM and never look back
Click to expand...
Click to collapse
Will Android 10 work on BT SD-BC6?
Daiboy1980 said:
Perfec thanks. Will I have to install Andoid 10 first? Currentyl on 9
Click to expand...
Click to collapse
You can but you don't need to. Malaysk can run on 9 as well.
ExtremeMOD said:
You can but you don't need to. Malaysk can run on 9 as well.
Click to expand...
Click to collapse
Great, thanks for that. I assume an MCU update to the most recent would be best practice before installing?
Daiboy1980 said:
Great, thanks for that. I assume an MCU update to the most recent would be best practice before installing?
Click to expand...
Click to collapse
You could yes.
Is there a preferred source of the file?
Daiboy1980 said:
Is there a preferred source of the file?
Click to expand...
Click to collapse
Right here on XDA. Search for the official Malaysk thread
Hi @ExtremeMOD I'll would like your help and knowledge, I bought a year ago a Chinese android head unit, specifically a yt9216b in Aliexpress
(https://aliexpress.ru/item/10000205...4W7zQi_w9naFPgRWKuFXS_Vu6YMEwP6xoCxIgQAvD_BwE)
months ago I changed the default launcher to Car Launcher Free by Apps Lab Studio
(https://play.google.com/store/apps/details?id=com.autolauncher.motorcar.free&hl=es)
and a month ago suddenly the touchscreen has no response and I cant do anything at all
I haven't upgraded or modified any of the firmware or anything like that cause I don´t know how to do it, as I wrote I only change launcher cause it was an easy thing to do and for esthetical reasons.
I´ve watched some of your videos and the only thing I can share to you about de head unit is the next image and the video of the failure or malfunction, cause the touchscreen isn´t working I can´t go to see the kernel version.
thanks for reading and hopefully you can advice of what and how to do it
happy holidays!!
rmortiz said:
Hi @ExtremeMOD I'll would like your help and knowledge, I bought a year ago a Chinese android head unit, specifically a yt9216b in Aliexpress
(https://aliexpress.ru/item/10000205...4W7zQi_w9naFPgRWKuFXS_Vu6YMEwP6xoCxIgQAvD_BwE)
months ago I changed the default launcher to Car Launcher Free by Apps Lab Studio
(https://play.google.com/store/apps/details?id=com.autolauncher.motorcar.free&hl=es)
and a month ago suddenly the touchscreen has no response and I cant do anything at all
I haven't upgraded or modified any of the firmware or anything like that cause I don´t know how to do it, as I wrote I only change launcher cause it was an easy thing to do and for esthetical reasons.
I´ve watched some of your videos and the only thing I can share to you about de head unit is the next image and the video of the failure or malfunction, cause the touchscreen isn´t working I can´t go to see the kernel version.
thanks for reading and hopefully you can advice of what and how to do it
happy holidays!!
Click to expand...
Click to collapse
Check the flat cable in the middle, inside the unit. Sounds like it's loose. Or insert it the other way.
Hey guys got a rkpx6 vertical head unit running android 9.0. I was wondering if there is anyways to upgrade the android version to a newer version such as 10 or 11. All I can find is 100$ firmware they try to sell you that adds "themes" doesn't update anything really regarding Android.
Here's some pictures with device/software information:
Anyone?
Conald P. said:
Anyone?
Click to expand...
Click to collapse
There is for now no way to get Android 10 onto these units.
...and by the way. Reminder only the next day.