Is there testpoint for Hardbrick? - AT&T Samsung Galaxy S7 Edge Questions & Answers

Do testpoint for Hard Brick?
There s7 edge g935A c hard brick.
It does not respond to it, and is not determined in the PC.
And that would not create a new topic
is it possible to replace the board to the board devices in other regions (eg g935F).
Thank you in advance for your answers.
Ask me for my bad english.

Related

HELP PLZ!how to Jtag a Prophet G4 device?

Hi,
I've found jtag pinout for HTC prohpet G4,
HTC Prophet Jtag Pinout
I've killed my device during update, and as far as i know i must use Jtag to unbrick my device,
I've built Xilinx DLC5 JTAG Parallel Cable III for this,but donno how to do that...
so i donno which adapter or software i need to use for jtaging the device,
where can i download the bootloader file to flash into my device?
i'm asking because i donno how to do this at all !
can anyone help me to do this ?
I need a complete step by step solution for this questions.
Thanx...
Any luck with that?

Questions about JTAG, Serial and PSAS.

Hello. I am new at this forum. I would like to know which serves the JTAG header and the serial port and why I need use together. Also I would like know if I can unbrick my HTC Magic with PSAS software and the serial cable or also I need JTAG.
I would like to get some technical information.
Thanks at all and sorry for my bad english.
nobody can tell me something about this questions?

hard bricked PLK-L01

Hello !
I post this here, because I don't think I'll find any solution using software method.
I flashed my rooted honor 7 PLK-L01 with a possibly wrong firmware ( UPDATE 170, originally for plk-l01?!) and it won't boot at all now.
I just get a vibration while pressing voldown+volup+start for 15 secs, but it won't get recognized by usb, even after pulling out the batterie manually.
After some research I've foud that my bootloader/preloader is dead, and the only ways would be using a copper wire to connect two pins, or to use a JTAG tester.
Unfortunately, I don't know how to recognize the pins, how it works, how to flash a rom with that.... and I can't find this informations for my phone, and I'm really a newbie in phone hardware.
For information, I got all we need for phone repairing, and I've heard somewhere that we can make a JTAG with an arduino.
Do someone could help me ? I am a bit lost, and I really want to get my phone back to life x(
Thanks for anything that could help, even small informations !!
have a nice day/night/anything !
PS : sorry if my english isn't perfect, I'm trying to improve it every days.
Hello,
I got the exact same problem. Has anyone found a solution yet ?
Thanks for your help !
Hello, I come from France and I've the same problem, my phone was rooted and I did an update from EMUI and ,unfortunately, my phone has been bricked. There is just a vibration when I press On + down volume. I also saw many JTAG issues for many Huawei phones but not for the Honor 7(PLK-L01). Maybe some developers are working on JTAG for this phone (or not). The idea is to find the famous Golden boot point and short this point to ground (GND). I tried to do this but I didn't succeed...
PS: Sorry if my english is not correct

Is there testpoint for Hardbrick?

Do testpoint for Hard Brick?
There s7 edge g935A c hard brick.
It does not respond to it, and is not determined in the PC.
And that would not create a new topic
is it possible to replace the board to the board devices in other regions (eg g935F).
Thank you in advance for your answers.
Ask me for my bad english.
re: G935A
Boombox001 said:
Do testpoint for Hard Brick?
There s7 edge g935A c hard brick.
It does not respond to it, and is not determined in the PC.
And that would not create a new topic
is it possible to replace the board to the board devices in other regions (eg g935F).
Thank you in advance for your answers.
Ask me for my bad english.
Click to expand...
Click to collapse
You are in the wrong forum, you need to go
to the AT&T forum for help if you have an
G935A S7 Edge.
Here is the link to the correct forum:
https://forum.xda-developers.com/att-s7-edge
Good luck,
Have a great day!

p8 lite L21 no power

hi guys! i just tried to find out why the touch doesn't work. but now the phone doesn't power on anymore and i was searching for schematics and maybe board view but i didn't found anything. please, could you help me? if you have one. thanks!
no one has those things? where can i buy something like that?

Categories

Resources