hey guys.
when I send a text.theres a message that pops up saying that my message was sent.I don't want this here.so I unclicked the delivery report but its still there!any help?also,the vibration is reallly long will all the tones.anything I can do?thanks!
read the wiki http://wiki.xda-developers.com/
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg = 1 (DWORD decimal).
i did this,but its not working!everything is there
it's a bit heavy handed but i think superrom 1.1 has this disabled
http://forum.xda-developers.com/showthread.php?t=288074
Registry Wizard has this option... never tried it though.
Also:
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMs g = 1 (DWORD decimal).
i did this,but its not working!everything is there
Click to expand...
Click to collapse
You know your supposed to be setting it to 0 right? Not 1.
Lewis
westcoastpj said:
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg = 1 (DWORD decimal).
i did this,but its not working!everything is there
Click to expand...
Click to collapse
Remember that you need to wait 30 secs or so after editing the registry and then you need to "soft reset".
--M
I couldn't find a post about how to boost the rather feeble ringtone volume but after a bit of research I got to the bottom of it :
HKEY_CURRENT_USER/Control Panel/Sound Catagories/Ring
The default value is 5, I changed this to 9 and now its good and loud.
Hope that's helpful to someone.
Wich key ? because none have default value 5 !
Thanks, this helped.
athome93 said:
Wich key ? because none have default value 5 !
Click to expand...
Click to collapse
key: InitVol
I tried it on my Touch Cruise but doesn't seems to make any differences.
I still have to use WavePad to amplify my mp3 ringtones.
I think its most effective if they are wma.
Best if they are : 48 kbps, 44 kHz, mono.
I tested with mp3 and (by ear) it didn't seem so clear.
Tested with mp3 but the modification doesn't seems to change ringtone volume.
and when I soft reset my TC, the reg key come back to its default value 5.
Deder5 said:
Tested with mp3 but the modification doesn't seems to change ringtone volume.
and when I soft reset my TC, the reg key come back to its default value 5.
Click to expand...
Click to collapse
I have the same problem as well... y will it change back to value 5 itself??
I use these settings
HKEY_CURRENT_USERControlPanelSoundCategories
Feedback
Atten 2 (default 0)
Init Vol 2 (def 2)
In Call
Atten 2 (def 2)
Init Vol - 5 (def 2)
In Call Feedback
Atten 1 (def 1)
Init Vol - 5 (def 4)
Ring
Atten - 2 (def 2)
Init Vol - 5 (def 3)
I hope it helps....
Over the weekend I applied a few registry tweaks (from tboy thread and g.lewarne thread) without making a note of the original settings....d'oh d'oh d'oh.
Now in Word I have lost the ability to move through the document via swipe.
Previously I could swipe up and down a page at a time. A long press at the rhs would activate a slider bar and a long press in the text would display [T] and then enable me to highlight text.
Now the swipe highlights text. Long press at RHS still activates slider. Long press in text activates a menu (select all, font, paragraph etc).
I'd like to restore the swipe to moving up and down through the doc as I find the slider difficult to use in a long doc, ie difficult to get to the right place in the doc.
Any help would be appreciated
Hi,
Which reg keys have you tweaked? I can give you the standard ones if you've noted the ones you've changed.
These are the ones I remember.....
HKLM/System/GDI/GLYPHCACHE To: 524288 (change both keys in there)
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize To: 131072
HKLM/Drivers/Display/VMMaxHeapSize To: 33554432
HKLM/Drivers/Display/Settings/SMI2 AllocSizeMB To: 32
HKLM/Software/HTC/HTCMenus/EnableVSync To: 0
HKLM/Software/HTC/MemoryRequired_ByAP] To: 524288
HKLM/Software/HTC/HTCAlbum/Require_Activate_Memory To: 20480
HKLM/System/GDI/Drivers/Bpp To: 24
HKLM/Software/HTC/HTCScroll/dist_to_pan to 20
HKLM/Software/HTC/HTCScrol/flickdown_threshold to 2000
HKLM/Software/HTC/HTCScrol/flickup_threshold to 2000
HKLM/Software/HTC/HTCScrol/friction to 14
HKLM/Software/HTC/HTCScrol/init_time_period to 1
HKLM/Software/HTC/HTCScrol/velocity_factor to 18000
HKLM/Software/HTC/Manila/HTCScroll.Enable to 1
HKLM/Software/HTC/TouchGL/FilterPixel_Range To: 30
HKLM/Software/HTC/TouchGL/FlickGestureDistance To: 10
HKLM/Software/HTC/TouchGL/GestureEnable To: 50
HKLM/Software/HTC/TouchGL/PinchDistance To: 50
HKEY_CURRENT_USER\Software\HTC\Manila\IsShortcutEnable To:0
ericjennings said:
HKLM/System/GDI/GLYPHCACHE To: 524288 (change both keys in there)
Click to expand...
Click to collapse
Limit: 8192
Limit0: 73728
ericjennings said:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize To: 131072
Click to expand...
Click to collapse
0
ericjennings said:
HKLM/Drivers/Display/VMMaxHeapSize To: 33554432
Click to expand...
Click to collapse
16777216
ericjennings said:
HKLM/Drivers/Display/Settings/SMI2 AllocSizeMB To: 32
Click to expand...
Click to collapse
Don't have this key.
ericjennings said:
HKLM/Software/HTC/HTCMenus/EnableVSync To: 0
Click to expand...
Click to collapse
1
ericjennings said:
HKLM/Software/HTC/MemoryRequired_ByAP] To: 524288
Click to expand...
Click to collapse
0
ericjennings said:
HKLM/Software/HTC/HTCAlbum/Require_Activate_Memory To: 20480
Click to expand...
Click to collapse
3072
ericjennings said:
HKLM/System/GDI/Drivers/Bpp To: 24
Click to expand...
Click to collapse
16
ericjennings said:
HKLM/Software/HTC/HTCScroll/dist_to_pan to 20
Click to expand...
Click to collapse
42
ericjennings said:
HKLM/Software/HTC/HTCScrol/flickdown_threshold to 2000
Click to expand...
Click to collapse
ericjennings said:
HKLM/Software/HTC/HTCScrol/flickup_threshold to 2000
Click to expand...
Click to collapse
4000
ericjennings said:
HKLM/Software/HTC/HTCScrol/friction to 14
Click to expand...
Click to collapse
20
ericjennings said:
HKLM/Software/HTC/HTCScrol/init_time_period to 1
Click to expand...
Click to collapse
100
ericjennings said:
HKLM/Software/HTC/HTCScrol/velocity_factor to 18000
Click to expand...
Click to collapse
10000
ericjennings said:
HKLM/Software/HTC/Manila/HTCScroll.Enable to 1
Click to expand...
Click to collapse
1
ericjennings said:
HKLM/Software/HTC/TouchGL/FilterPixel_Range To: 30
Click to expand...
Click to collapse
There is no underscore '_' in my key, but my key value is:
10
ericjennings said:
HKLM/Software/HTC/TouchGL/FlickGestureDistance To: 10
Click to expand...
Click to collapse
My key is FlickGestureDistanceThreshold:
15
ericjennings said:
HKLM/Software/HTC/TouchGL/GestureEnable To: 50
Click to expand...
Click to collapse
90
ericjennings said:
HKLM/Software/HTC/TouchGL/PinchDistance To: 50
Click to expand...
Click to collapse
100
ericjennings said:
HKEY_CURRENT_USER\Software\HTC\Manila\IsShortcutEnable To:0
Click to expand...
Click to collapse
I've changed this key also, but standard is 1.
Thanks, will try these tonight
please an anyone explain me what do each value?
i found this file here https://android.googlesource.com/de...07219f5a88a47df37e7d2764bd/thermald-mako.conf
Code:
[tsens_tz_sensor0]
sampling 5000
thresholds 10
thresholds_clr 5
actions none
action_info 0
Firstly, I guessed that the value in "threshold" file was the value of temperature.... but I dont know...
Any help, please?? thanks!
Overclocking
OnePlus 5T A5010
This is an overclock solution for the clock speed
limiter on the OnePlus 5T's second cluster of CPUs.
Requires root access, and advised to make
a TWRP recovery backup before attempting this.
ElementalX Kernel Manager
Download
X-plore File manager
Download
(Or root browser of your choice)
Build.prop Editor
Download
SSD Boost
Download
1.
First, open up X-plore and navigate to
root/system/etc/vendor/perf/targetconfig.xml
Long press on targetconfig.xml and hit edit text,
then scroll to the very bottom where
you'll find the 2361Mhz limiter.
Replace the config1 brackets with this
Code:
<Config1>
<TargetInfo
Target="msm8998"
NumClusters="2"
TotalNumCores="8"
SocIds="292,319"
SynCore="1"
CoreCtlCpu="-1"
MinCoreOnline="0"
CpufreqGov="1" />
<ClustersInfo Id="0" NumCores="4" Type="little" />
<ClustersInfo Id="1" NumCores="4" Type="big" />
</Config1>
If you've already flashed ElementalX kernel
you can reboot and skip step 2.
2.
Flash the custom kernel
from the ElementalX tab in the app.
Choose custom installation and proceed
to select the overclock frequency caps in recovery.
3.
Set the max frequencies to 2035 and 2592Mhz
and tick the on boot icon blue.
Disable core_control and enable msm_thermal
tick both set on boot.
Enjoy your heightened and less restricted
CPU speeds.
See below for tuning
You should notice a considerable boost
in performance with these apps/tweaks.
Hope this helps anyone that's been having trouble.
Feel free to comment whether or not it worked for you.
Buy me a beer:
PayPal.me/newton3788​
ElementalX Tweaks
CPU Min/Max
Cluster 1: 518Mhz / 2.03Ghz
Cluster 2: 806Mhz / 2.59Ghz
CPU Boost
Core 0: 748Mhz / Core 4: 1.26Ghz
Duration: 100ms
GPU
GPU Boost: High
Interactive governor tunables
I've added the downloadable cluster profiles at the bottom.
You may place them in the ElementalX gov_profiles folder.
Cluster 1:
go_hispeed_load - 75
above_hispeed_delay - 20000 2035200:30000
timer_rate - 20000
hispeed_freq - 1670400
timer_slack - 50000
target_loads - 70 1804800:85 1900800:90
min_sample_time - 25000
Cluster 2:
go_hispeed_load - 85
above_hispeed_delay - 20000 2592000:50000
timer_rate - 20000
hispeed_freq - 2035200
timer_slack - 50000
target_loads - 80 2265600:85 2457600:90
min_sample_time - 25000
Build.prop Tweaks
ro.min.fling_velocity=6000
ro.max.fling_velocity=12000
persist.sys.composition.type=dyn
debug.composition.type=dyn
debug.egl.force_msaa=true
persist.sys.use_dithering=1
persist.sys.scrollingcache=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
ro.kernel.android.checkjni=0
logcat.live=disable
wifi.supplicant_scan_interval=400
ro.media.enc.jpeg.quality=100
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
Open Xplore and edit
root/vendor/etc/build.prop
Replace and add these:
dalvik.vm.heapstartsize=32m
dalvik.vm.heapgrowthlimit=384m
dalvik.vm.heapsize=768m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=8m
dalvik.vm.heapmaxfree=16m
Developer Options
Force GPU Rendering off
Disable HW Overlays off
I've yet to find a solution for the random stuttering
But I'll add it if I do​
newton378 said:
ElementalX Tweaks
​
Click to expand...
Click to collapse
Thanks for your tips here mate.
can you tell how s battery life affected
after this changes,i m trying your settings
but i faced deep sleep problems,do you face this too?
broky said:
Thanks for your tips here mate.
can you tell how s battery life affected
after this changes,i m trying your settings
but i faced deep sleep problems,do you face this too?
Click to expand...
Click to collapse
My device sleeps fine, I use the greenify app to hibernate apps on screen off. I can't account for any tweaks you've made to your device apart from what I've detailed here, mine is stock OOS with the EX kernel. Battery life drops depending on usage but you don't overclock to save battery.
edit: I was having battery problems but I've since flashed stock OOS and set everything back up, the battery life is superb with these governor profiles.
OK,I was just anxious about deep sleep,
I know overclockung drains battery.
Will keep on trying this
EDITnewton378
why don t you post this on oneplus 5 thread also, so more people see it and test it?
(just a suggestion)
broky said:
OK,I was just anxious about deep sleep,
I know overclockung drains battery.
Will keep on trying this
EDITnewton378
why don t you post this on oneplus 5 thread also, so more people see it and test it?
(just a suggestion)
Click to expand...
Click to collapse
http://imgur.com/a/Bhqj83w
No problem with deep sleep on my end.
newton378 said:
http://imgur.com/a/Bhqj83w
No problem with deep sleep on my end.
Click to expand...
Click to collapse
were you using the phone for 2 hours constantly?
or you left the phone idle?
broky said:
were you using the phone for 2 hours constantly?
or you left the phone idle?
Click to expand...
Click to collapse
Constant use and then idle for 10 minutes, deep sleep initiated quickly. No idea what problem you're having, sorry.
newton378 said:
Constant use and then idle for 10 minutes, deep sleep initiated quickly. No idea what problem you're having, sorry.
Click to expand...
Click to collapse
Testing as we talking,till now my deep sleep is fine.
Probably something else caused this,thanks for your response and help.
Update
newton378 said:
ElementalX Tweaks
CPU Boost
Core 0: 748Mhz / Core 4: 1.26Ghz
Duration: 100ms
​
Click to expand...
Click to collapse
you mean
A
0:748Mhz
1:0
2:0
3:0
4:1.26Ghz
5:0
6:0
7:0
or
B
0:748Mhz
1:748Mhz
2:748Mhz
3:748Mhz
4:1.26Ghz
5:1.26Ghz
6:1.26Ghz
7:1.26Ghz
??
i use configuration B and the device is faster than ever but i need to know if this is right:good:
broky said:
you mean
A
0:748Mhz
1:0
2:0
3:0
4:1.26Ghz
5:0
6:0
7:0
or
B
0:748Mhz
1:748Mhz
2:748Mhz
3:748Mhz
4:1.26Ghz
5:1.26Ghz
6:1.26Ghz
7:1.26Ghz
??
i use configuration B and the device is faster than ever but i need to know if this is right:good:
Click to expand...
Click to collapse
I don't think it matters as each cluster's frequencies are locked in sync. Core 1-3 follow 0 and 5-7 follow 4. Setting SynCore to 0 in targetconfig.xml is supposed to allow all cores to fluctuate on their own but it doesn't. Controller must be embedded deeper in the system.
broky said:
OK,I was just anxious about deep sleep,
I know overclockung drains battery.
Will keep on trying this
EDITnewton378
why don t you post this on oneplus 5 thread also, so more people see it and test it?
(just a suggestion)
Click to expand...
Click to collapse
I believe the phone doesn't enter deep sleep when charging due to rapid charging technology. Not sure if turning the phone off to charge helps it stay low power.
I figure this because I left it charging overnight and I had 33 minutes deep sleep and 10 hours of min frequency.
is it required elementalx kernel?cuz i'm using arter kernel right now
filandry said:
is it required elementalx kernel?cuz i'm using arter kernel right now
Click to expand...
Click to collapse
For the tweaks in the second post, no. If you want to have the overclocked CPU speeds, it's made possible by flashing EX kernel with custom settings.
I've tried flashing bluspark kernel over EX kernel and the result was relatively smoother than stock OOS with only EX kernel, however a lot of the settings in EXKM were automatically reverting to bluspark defaults when changed. I don't advise flashing custom kernels over each other unless you want to experiment and have a backup.
You can still remove the limiter on the second cluster's cores with the targetconfig.xml tweak for 2.45Ghz max clock speed.
newton378 said:
For the tweaks in the second post, no. If you want to have the overclocked CPU speeds, it's made possible by flashing EX kernel with custom settings.
I've tried flashing bluspark kernel over EX kernel and the result was relatively smoother than stock OOS with only EX kernel, however a lot of the settings in EXKM were automatically reverting to bluspark defaults when changed. I don't advise flashing custom kernels over each other unless you want to experiment and have a backup.
You can still remove the limiter on the second cluster's cores with the targetconfig.xml tweak for 2.45Ghz max clock speed.
Click to expand...
Click to collapse
so i only need this right?(for remove limiter)
First, open up X-plore and navigate to
root/system/etc/vendor/perf/targetconfig.xml
Long press on targetconfig.xml and hit edit text,
then scroll to the very bottom where
you'll find the 2361Mhz limiter.
Replace the config1 brackets with this
filandry said:
so i only need this right?(for remove limiter)
First, open up X-plore and navigate to
root/system/etc/vendor/perf/targetconfig.xml
Long press on targetconfig.xml and hit edit text,
then scroll to the very bottom where
you'll find the 2361Mhz limiter.
Replace the config1 brackets with this
Click to expand...
Click to collapse
Correct.
newton378 said:
Correct.
Click to expand...
Click to collapse
okay,will give it try :good:
edit :
yes it worked,although it's litte bit different from your guide..
here's my guide to remove second cluster cpu clock limiter (no overclock) using stock cpu clock speed :
First, open up Explorer and navigate to
/system/vendor/etc/perf
Find and Long press on targetconfig.xml and hit edit text,
then scroll to the very bottom where
you'll find the 2361600 limiter number and change it to 2467600
Save And Exit,and then reboot the devices
filandry said:
okay,will give it try :good:
edit :
yes it worked,although it's litte bit different from your guide..
here's my guide to remove second cluster cpu clock limiter (no overclock) using stock cpu clock speed :
First, open up Explorer and navigate to
/system/vendor/etc/perf
Find and Long press on targetconfig.xml and hit edit text,
then scroll to the very bottom where
you'll find the 2361600 limiter number and change it to 2467600
Save And Exit,and then reboot the devices
Click to expand...
Click to collapse
Yes, that would effectively raise the frequency cap but it works the same removing it altogether. Hence, cluster 1 doesn't have the max freq parameter in there and it can hit 1.9Ghz by default.
a10
does it work for android 10