Database Users

Summary of Registry Hack that work on 818pro/Prophet

Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this post.
MOD EDIT:
This is also in the wiki
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hacks_WM5

THX for the info.
But any hack for CHT ver. using smartdailer??
THX

Enable your built-in Lunar calendar (for WWE Rom)
enable your built-in Lunar calendar (for WWE Rom)
edit your registry:
Hkey_Local_Machine\Software\Microsoft\Calendar
set the value of "ShowLunarCalendar" to 1
then soft-reset (Optional)
open your calender program and click the on right-bottom Menu -> View -> Lunar
Enjoy

sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll

This one works too... (from a previous wizard tweak i think)
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000

marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.

marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.

Speed Improvement
1.HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
Change 'limit' Value data to 32768
Original Value = 131072
2.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\FATFS
Change 'CacheSize' Value data to 4096
Original Value = 0
3.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Filters\fsreplxfilt
Change 'ReplStoreCacheSize' Value data to 4096 or 8192
Original Value = 0
4.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Profiles\MSFlash\FATFS
Change 'DataCacheSize' Value data to 4096
Change 'Flags' Value data to 40
For Step 4, if your PDA don't have this registry, add new registry and use DOWORD value.
Disable menu animations to increase performance:
"HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu"
Change "AniType" from "6" (default) to "0" (disabled).
Make sure bluetooth is alive during a conversation. If you ever have trouble with BT timing out, try:
HKEY_Current_User\ControlPanel\Phone
Change the Sleep key from a 1 to 0.

Re: This one works too... (from a previous wizard tweak i th
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??

Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex

mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?

mcnasby said:
mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?
Click to expand...
Click to collapse
You can read the source from here

Do we need these registry hacks with the new ROM (AKU2)?

Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)

Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]

Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?

Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?

Urban Strata said:
Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]
Click to expand...
Click to collapse
hi there, i believe you can still change the date representation in regional settings.
Tried the software on a Pro flashed S200 ROM, however, i still have the battery on the today screen. On other apps, it works fine.

Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.

thescum said:
Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.
Click to expand...
Click to collapse
Yes, the keyboard is default no matter what reg hacks I try either. Tweaks2k2 and sktools tweaks don't work either. I think it's a wm5 thing and I can't figure it out.

How do I restore the "screen orientation" icon in

In S100 I had that icon in the tray but in TyTN it's gone.
TyTN automatically changes to portrait when the keyboard is open but I'd like to do it via tray-icon as I was used to.
Is there a way/reg change to show it again?

From http://www.winmobforum.com/general-discussion/557-windows-mobile-5-hacks-tricks.html
Hide/Show Screen orientation icon
If you wish to hide the Screen orientation icon, shown in the task bar on some devices, you can set:
HKLM\System\GDI\Rotation\HideOrientationUI = 1 (DWORD decimal)
And to show it again:
HKLM\System\GDI\Rotation\HideOrientationUI = 0 (DWORD decimal)
If this doesn't work, you can try:
HKLM\Services\screenrotate = 0 (DWORD decimal)
And to show it again:
HKLM\Services\screenrotate = 1 (DWORD decimal)
Note that this icon and its feature may not be available on your device at all.
Click to expand...
Click to collapse
As it says I've no idea if it works. If it does please add it to the wiki

Thanks, I already tried it but it doesn't work..
Moreover.. the "Services" key makes me undertand that the icon is placed there by a "service" that in my tytn seems not to exist (I don't have the "ScreenRotate" service among other keys).

Certificate solution?

Hello guys,
I've just got my MDA Vario today. I like it but I'm getting crazy of the certificate stuff when i try to launch a program (Pocket Informant or iLauncher for example). I've already tried several things but none of them work; i just want to disable the whole function. Anyone knows how to? Most topics on most forums on this subject are pretty old...
I have a G4 device, I don't know if this matters but just for the info.
My second question is: will I disable the certificate checking if I unlock my G4 device? I like to unlock it, but I'm a bit scared for voiding the warranty...

*small kick*

To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)

imisim said:
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
Click to expand...
Click to collapse
Already tried that, and it was a 1 by default so that aint no solution either...
Also tried the Default_blabla.cab, which didn't work either

Add time & date instead of the battery icon

Hi all, on my M3100 there was a program called pimp my black which allowed you to not only get rid of the annoying battery icon and replace it with the time but also the date in the top right of the screen. Does anyone know how of if this is possible on the Touch Dual yet?
thanks

I would like this as well.

To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
JIC you might need more.
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show both the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)

thescum said:
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
JIC you might need more.
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show both the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
Click to expand...
Click to collapse
Ok, I need some help please, I get as far as HKLM\Software\Microsoft\Shell then the TBOpt is not there, Taskbar is there so I changed that to 3 and then reset and I have no clock at all when in screens other than home screen. Any advise.

seal said:
Ok, I need some help please, I get as far as HKLM\Software\Microsoft\Shell then the TBOpt is not there, Taskbar is there so I changed that to 3 and then reset and I have no clock at all when in screens other than home screen. Any advise.
Click to expand...
Click to collapse
Change taskbar back.
If TBOpt is not there, create a key by the same name.
then add the dword (decimal) 3

ok that works! for others you will need to set "ShowTitleBarClock"=1 otherwise it gets a little congessted in that area!

thescum said:
Change taskbar back.
If TBOpt is not there, create a key by the same name.
then add the dword (decimal) 3
Click to expand...
Click to collapse
OK I created a New Key under Shell and then while it was highlighted I pressed edit at bottom of screen and pressed "New DWORD Value" and under "Value Name" I entered TBOpt and in "Value data:" I entered 3 and the "Base" was Decimal. IS THIS CORRECT???
ALSO:
swhite17 said:
ok that works! for others you will need to set "ShowTitleBarClock"=1 otherwise it gets a little congessted in that area!
Click to expand...
Click to collapse
Sorry not the fastest with this stuff, where do I find "ShowTitleBarClock" so I can change the setting?

What you need to do is create a new DWORD value (TBOpt) under the Shell key, do not create a new key. Under the current Shell key you should only have the value ShowTitleBarClock which is what you need to change and the TBOpt value you created.

Thanks heaps, all is working now.
One last question, I have the date above the time which is fine but the date is 6/01/0 the last digit is missing, is there a way to edit this to fix the problem or even get rid of the year as I can usually remember what year it is but month and date I need very bad.......

Hmm mine is using UK time so the format only cuts of the last digit of the year for me. It uses the Short date format from within the Date tab within regional settings so maybe you can alter that to appear like mine? the weird thing is on my M3100 it is set exactly the same but instead of showing 05/01/08 it only shows 05 Jan, weird. Maybe someone else knows

That would be perfect, that format "5 Jan" ..... Does anyone know how to get this format for the date?

seal said:
That would be perfect, that format "5 Jan" ..... Does anyone know how to get this format for the date?
Click to expand...
Click to collapse
Goto settings\regional settings and under the "Date" Tab:
For short Date choose one of the presets: dd-MMM-yy
for "Date Seperator", choose space instead of the default "-" (dash).
Unfortunately you can't change the presets, so the option suggested above is the closest you can get.

thescum said:
Goto settings\regional settings and under the "Date" Tab:
For short Date choose one of the presets: dd-MMM-yy
for "Date Seperator", choose space instead of the default "-" (dash).
Unfortunately you can't change the presets, so the option suggested above is the closest you can get.
Click to expand...
Click to collapse
I tried "space" and it still didn't fit, then I tried a "." and it fits perfect, I don't know what will happen when the day becomes 2 digits it might be out again but thanks heaps for your help you have fixed my problem.

seal said:
I tried "space" and it still didn't fit, then I tried a "." and it fits perfect, I don't know what will happen when the day becomes 2 digits it might be out again but thanks heaps for your help you have fixed my problem.
Click to expand...
Click to collapse
glad to be some kinda help

ok i managed to display the clock on the title bar but can i remove the battery indicator from the title bar completely ?

anyone have screenshot ???

Can anyone post the text to enter into the registry for me... totally new at this, but I just want the clock back on my today screen.
Thanks

great said:
ok i managed to display the clock on the title bar but can i remove the battery indicator from the title bar completely ?
Click to expand...
Click to collapse
So far I've managed to get no less than two battery indicators when I'm on the home screen, and one when in a program.
What I want is neither clock or battery indicator on the title bare.
I'm running mobile 6, and have tried to set the TbOption in HKLM\software\ms\shell to 0, and the ShowTitleBarClockthingy to 0. This results in a empty space where the clock used to be, and a somewhat sluggish performance, as well as the icon next to (signal strength) to be cut in half, so not a good solution at all.
So I tried to remove the new key, and use KaizerTweak, which resulted in good performance, but two indicators... me confused be
All I wanted was nothing!
Sort of new to WinMobile 6, so It's probably some noobism in me as well.
br
Vegar

Time in system tray

Hi,
does anyone knows how to off the time displaying in system tray on home screen ? I am referring to the time located at the extreme upper right corner. Since I already have the big clock on manilla, i thought the time on the system tray shld be redundant. Any advices ?

Hi, Go to Settings/AllSettings/Clocks & Alarms and deselt the tick box for "Display the click on the title bar in all programs". This will disable it everywhere, not just for the home screen (I don't believe that option is available). I'm sure that this has already been published here. Search is your friend

cMMY69 said:
Hi, Go to Settings/AllSettings/Clocks & Alarms and deselt the tick box for "Display the click on the title bar in all programs". This will disable it everywhere, not just for the home screen (I don't believe that option is available). I'm sure that this has already been published here. Search is your friend
Click to expand...
Click to collapse
oh thanks for ur help. I tried searching but didnt manage to see a relevant post. I went to that option, but apparently i didnt see the option there .. it does not have the display on title bar .. i think it might be due to custom rom. Am using energy 23554 build.. but anyway thanks for ur help !

anyone knows?

Change the display of the clock in the taskbar
The clock in the taskbar can be changed to show not only the time, but also the date, or just the date, or nothing at all.
To show nothing:
HKLM\Software\Microsoft\Shell\TBOpt = 0 (DWORD decimal)
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show just the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)

pool7979 said:
anyone knows?
Click to expand...
Click to collapse
i have answered this for you in the energy rom thread

Som30ne said:
Change the display of the clock in the taskbar
The clock in the taskbar can be changed to show not only the time, but also the date, or just the date, or nothing at all.
To show nothing:
HKLM\Software\Microsoft\Shell\TBOpt = 0 (DWORD decimal)
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show just the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
Click to expand...
Click to collapse
thanks ! but something seems to be wrong. I do not have the tbopt under shell .. hmmm

pool7979 said:
thanks ! but something seems to be wrong. I do not have the tbopt under shell .. hmmm
Click to expand...
Click to collapse
just add it

hey thanks so much for ur help !!!