Related
TWRP PitchBlack 2.8.0
3.2.1..0
https_%2F%2Favatars2.githubusercontent.com%2Fu%2F37493898_s=280&v=4
TWRP (Team Win Recovery Project) PitchBlack is a TWRP developed by Reza Adi, maintained by Manjot Sidhu and Mohd Faraz and themed by FireWolf.
Is based on TWRP 3.2.1-0
COMPILED BY IUME TEAM
PitchBlack-TWRP
Brought to you by: androiabledroid, firewolfxda, manjotsidhu, pitchblack, rezaadipangest
Treble spported recovery for mido
This is not my build I am just shire. I am not
responsible your break device.your own risk flash
DOWNLOD >
https://sourceforge.net/projects/pitchblack-twrp/
Installation guide:
If you also want the tools available in TWRP PitchBlack:
(SuperSU, Unroot SuperSU, Unroot Magisk, FP Scanner, RM Subs Overlays, Enable HAL3, MTP Fix, Lazy Flasher, Magisk, Aroma FM, Pin / Pass Remover, RM All Subs Overlays, Delete App)
1. Copy the "Zip Installer" to your Micro SD Card.
2. Install it by clicking on Install » Select Storage » Mircro SD Card and select the TWRP PitchBlack zip, do a swipe, the installation will be automatic, you will automatically find yourself in the new TWRP.
If you do not want the tools in TWRP PitchBlack:
(SuperSU, Unroot SuperSU, Unroot Magisk, FP Scanner, RM Subs Overlays, Enable HAL3, MTP Fix, Lazy Flasher, Magisk, Aroma FM, Pin / Pass Remover, RM All Subs Overlays, Delete App)
1. Download the "recovery.img" in your PC.
2. Open ADB & Fastboot Minimal. [DOWNLOAD]
3. Type
Code:
fastboot flash recovery
5. Click space and drag the TWRP PitchBlack downloaded into the fastboot window.
Requirements:
Bootloader unlocked
FRP Unlocked
Status: Stable, only bug is backup of F2FS
I cleaned the thread up for you and moved it to the discussion section where "shares" go. :good:
I found our device is treble supported type-A partition
So here i found (gsi) zenui 5.0 need to test
INSTALL
* Enable Treble > Flash a Fully-Trebled 8.1 ROM or just wipe data,cache,system
Mount the system, go to the system / etc directory backup selinux folder
Flash fbe disabler and permissiver
Wipe everything except vendor
Flash zui system flashme . zip
Mount system and vendor
Flash all patches
Flash sound fix
Mount the system to copy the selinux folder backed up in advance to the /system/etc directory.
Flash magisk if u need
* first reboot may take some time
Bootloop Fix:
- If you still have bootloop or systemui fc format data
Bugs:
- Nothing
(I'm not developer)
Android Version
- 8.1 Oreo
DOWNLOAD
https://mega.nz/#F!af4xQIKa!Ffz3u-9MOtFmxbDFUk9ZZg
PATCHES
https://share.weiyun.com/5khJ8F9
Thanks for sharing
thank for shearing but do you install it (screenshot?)
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Matra-PB said:
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Click to expand...
Click to collapse
That may not be the problem I've hear a lot of people are having this problem. But it's a good place to start if he hasn't tried it yet.
Success story upgrading A500 in 2019 July
finneus_ said:
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Click to expand...
Click to collapse
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
Step1a: Install a File Manager app from the Google playstore. This will help you extract the CPU ID and convert it with the SBK tool to get the SBK number/string. important steps SBK tool was available in file - SBCalc_v1.1.ZIP available in this forum.
STEP 2b: SUPERUSER and SUPERSU installation
1. Install SuperUser.apk first.. (IMP - Its available in this forum. Its like a base version for superSU to install over. If you do not install SuperUser.apk, then each time you try installing SuperSU, you would get an error message about a SU file being incompatible.)
2. Then install an older version of SuperSU downloaded from the website - filename -> eu.chainfire.supersu_v2.65-265.ZIP . Newer versions will not work. U got to install an older version as new version seems to be a paid SW.
3. Next Open SuperSU app on your tablet and let it update itself a couple of times each time opening and closing the app after the upgrade.
4. Remove SuperUser.apk file as now its no longer needed.
5. Now that you have ROOT access and SuperUSer access
6. Install Titanium Backup. File name in this forum- update-recovery-TWRP-rev2.0-beta4.ZIP . This will help you to flash/upgrade ROM software on your tablet.
Twrp 2.8:
http://www.mediafire.com/file/e7wpny5f39vw3pc/update-recovery-TWRP-rev2.0-beta4.zip/file
Compressed Archive (.ZIP)
File size: 4.91MB
Uploaded: 2018-08-14 21:40:26
https://www.mediafire.com/download/e7wpny5f39vw3pc
STEP 3: Install an Unlocked Bootloader i.e. unlocked bootloader Skrillax v9 - file name in this forum BabSector.rar or A500-Bootloader-Nvflash.ZIP
Once you have reached this step, you now have the basic tools needed for the final ROM upgrade of the tablet.
I did get error message after the reboots that happened after Unlocking the Bootloader. Someting about a LNX partition not being okay or some such msg. Each time I just WIPED the Cache and selected similar options to wipe System, Data, User, Dhelvic cache (spelling incorrect) etc. Since you have not installed the final OS or ROM for your tablet yet, no harm in deleting these partition data. Actually its recommended to wipe, format in f2f formats etc. all of which is possible using the TWRP Recovery software you installed in step 2. Choose Recovery menu option each time the tablet boots or gives errors.... using the volume rocket and power buttons. More info -> Go through this thread and install unlocked bootloader.
https://forum.xda-developers.com/showthread.php?t=1622425
Flashing Bootloader Steps
-------------------------
1. generate your SBK from cpuid
2. put tab in APX by holding reset (small pinhole bottom right side)
and pushing power for 3-4 sec. - then release reset approx 1 sec. later
the screen should be blank and power button should be lit - plug in USB to PC.
2. Run A501 A.bat - when finished reboot tab to recovery (win 7 and under
right click on A501 A.bat and select Run as Administrator)
3. run Recovery(power and volume-) ->WIPE -> "Advanced wipe ->System (only)and swipe to wipe.
4. unplug USB and reboot tab to APX
5. plug in USB afer it is in APX mode -> Run A501 B.bat (win 7 and under
right click on A501 B.bat and select Run as Administrator)
Bootloader unlock tutorial
--------------------------
Step 1: Get your cpuid - https://forum.xda-developers.com/showthread.php?t=1624645
Step 2: Convert it into an SBK - https://forum.xda-developers.com/showthread.php?t=1810618
Step 3: Download the A500 drivers
- http://www.mediafire.com/file/pde8rojv1t8gnif/USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501.zip/file
Step 4: Download the files to install the bootloader
- http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
Step 5: Follow the instructions in "how to.txt"
Step 6: Download a rom and flash in twrp
This tutorial is based of
https://forum.xda-developers.com/showthread.php?t=2450119 thread so big thanks to KaijiKun .
Bootloader unlock files:
http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
STEP 4. Downloaded file omni-4.4.4-20150210-a500-IconiaHD.ZIP as I was not sure version omni 5.1.1 was as stable as Omni4.4.4 reading all the threads in this forum.
First rename the downloaded OMNIROM file as update.zip .
OmniRom 4.4.4
http://www.mediafire.com/file/ghd72j3g618kk9g/OMNIROM-5.1.1-Tegraowners_ROM_v13t2.zip/file
File size: 244.66MB
Uploaded: 2015-04-05 17:40:14
STEP 5: Install another tool adb_fast.ZIP. This tool is also available in this forum.
Note:You need to copy the update.zip file to your computers folder where this tool adb_fast is installed. In mine it was C:\Program files (x86)\Minimal ADB and Fastboot folder. This adb_fast file creates an application shortcut on your computer desktop. Clicking on the short cut launches adb and fast boot programs I mentioned at the beginning.
STEP 6: Copy the file to the SD card (16GB) of your tablet.
Run the adb_fast tool from your desktop shortcut. This will open a Command Prompt type black screen window where you can enter the code as given below. Note you may need to see how your SD card is listed in a file manager in your computer
Code:
adb push update.zip /mnt/sdcard/update.zip --- NOTE: this creates mnt folder on internal storage and I had to then move the file using TWRP recovery tool installed in step 2, to the SD card.
adb push < ------- is the push command.
rom.zip < ------- is the name of the Rom zip file.
/sdcard < ------- is the location your pushing the Rom to.
E.) Reboot tablet with Power+Down Arrow i.e. This will start the Upgrade process for the tablet to OMNIROM 4.4.4
-- Power Button + UP VOLUME pressed... then release Power button after LED lights.
-- System will boot to commmand prompt
STEP 7: Install GAPPS using pico gapps short version and Wipe Data/Factory reset ----------------?>and wipe cache partition?
Reboot after 1st reboot
G.) https://opengapps.org/ to install a minimal version of Google Apps on the tablet.
File name -> pa_gapps-modular-mini-4.4.4-20150410-signed.ZIP
Root tablet again and install SuperSU if you need it
other info.
You can use TWRP to flash the OmniROM on the tablet or you can use the following in worst case senario to do the same.
Code:
fastboot devices
fastboot flash update.zip -- check if syntax is ok from threads in this forum
fastboot reboot-bootloader
copied below from other threads ---->
I find that a large amount of complaints in developer threads are due to people not properly wiping before a flash.
Of course there is times when a 'dirty' flash is fine, but if you're ever not sure, wipe as cleanly as possible.
fastboot allows for about the cleanest of wipes by the way. And each partition can be done separately too.
Code:
fastboot erase system
fastboot erase data
fastboot erase cache
can all be done individually, but to do these all in one command
Code:
fastboot erase system -w
If possible I recommend to do these steps before flashing a ROM, and now that you know you can do this all within fastboot mode i suggest to try it out, its quick and painless!
Don't forget to wipe your kernel too! (fastboot erase boot)
~Important~ If your device uses an emulated SD card (as in no removable micro SD but an SD partition on phone)
Then be careful wiping data/userdata as this will erase all contents of internal SD - you are forewarned!
ADB= Android Debugging Bridge (ADB)
[TOOL]Minimal ADB and Fastboot [2-9-18]
https://forum.xda-developers.com/showthread.php?t=2317790&page=12
First a short explanation:
Fastboot, like ADB, is a tool to communicate from PC to Android phone. There are times when it is a must to use, and times when it is just helpful.
ADB is used within your recovery or within your OS, but when you are in bootloader mode and need to communicate with your phone then you need fastboot.
And you may ask why would i ever need this?
Well many reasons. Main one is knowledge, learning the ins and outs of fastboot, like learning ADB, can get you out of many jams.
And if you want to unlock your bootloader this is done through fastboot. Granted HTC's unlock is... well crap, but for a Nexus this is how its done.
One other reason I have to stress is learning for safety reasons, This is about the safest way possible to flash firmware to your phone (ie Radio, Hboot, Recovery)
Lastly you may want to know the limitations,
There are many of course, this isnt JTAG, it will not resurrect a hard brick, but it often save peoples phones from 'soft bricks' and lots of time when know how and when to use it.
Think of fastboot as the program that takes over when ADB cant be used, it works with firmware more than software.
https://forum.xda-developers.com/showthread.php?t=1624645&page=3
GUIDES
---------------
Civs Guide to flashing the bootloader http://forum.xda-developers.com/showthread.php?t=1622425
Walkthrough using APXFLASH tool at Step 6 http://forum.xda-developers.com/showthread.php?t=1624645&page=2
From Civato's OP of The Guide: nvFlashToolPackages
Skrilax_CZ bootloader thread http://forum.xda-developers.com/showthread.php?t=1619913 and should be "required reading" for anyone mucking about in their tabs internals!!!!
Rollback to HC
jazzyjames guide http://forum.xda-developers.com/showthread.php?t=1516012
Iconia Root http://forum.xda-developers.com/showthread.php?t=1138228 /gingerbreak: For returning to Honeycomb
----------------
To get my CPUID, I have followed the steps below:
Open yr file explorer, esfile explorer is a great one....navigate to:
/sys/firmware/fuse/acer_cpuid - add a zero to the front!
To get CPUID get a Root browser of some sort and go to sys/firmware/fuse/acer_cpu_id
convert my CPUID into SBK?
--------------------------
https://forum.xda-developers.com/showthread.php?t=1055354&page=6
What Does Root Give Me?
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
o Themes
o Core apps (maps, calendar, clock etc)
o Recovery image
o Bootloader
o Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
o Boot images
o Add linux binaries
3. Run special apps that need more control over the system
o SuperUser (lets you approve or deny the use of root access to any program)
o Task Manager For Root (Lets you kill apps that you otherwise could not kill)
Tether apps (like the one found at [android-wifi-tether.googlecode.com])
4. Backup your system
o You can make a folder on your SDCARD and backup all of your .APK files to your SDCARD (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su <enter> reboot <enter>)
Turn the rotation lock off.
-------------------------------------------------------
SUMMARY - Regardless of version, rooting is the same... next
** Unlock the bootloader.
** Fastboot flash a Custom Recovery (TWRP).
** Download to the Tablet, Chainfire's SuperSU root updater .zip
** Boot into the previously fastboot flashed Custom Recovery, and flash the SuperSU updater .zip.
** Reboot - you're rooted.
-------------------------------------------------------
PS. I tried to maintain a log in Notepad during my upgrade. Unfortunately did not write detailed instructions and link to required files. Above is a summary of what worked for me.
Can not root
sukasis said:
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
......
Click to expand...
Click to collapse
Hi sukasis, i was unable to root the tablet. I download all and run the runit.win.bat (trying normal, as admin, and open a cmd as admin and then navigate to the bat to execute).
- It say device connected
- Then push 7 files correctly
- Executing of the main script. (it freeze here a lot of time)
Then error: protocol fault (no status)
The file "su" isn't created
Not getting root!
I try in USB 3.0 and 2.0 same error.
I have windows 10.
I uncheck the Debugging mode and it's bring another error, so i believe the connection is good because in debug mode can push files.
I don't know whate else i can do.
I tested some OEM GSI of Erfan, I give a list which GSI could run on our device.
Download Link
If you meet random reboot when booting, try to flash Treble files(boot.img vendor.img) again.
V2.0 is the most stable Treble version, I tested on it.
These GSI could run on V2.0 :
Flyme-Aonly-9-20190702-ErfanGSI
HydrogenOS-Aonly-9-20190614-ErfanGSI
MIUI-Aonly-9-20190529-ErfanGSI
OxygenOS-Aonly-9-20190701-ErfanGSI
ZUI-Aonly-9-20190617-ErfanGSI
How to flash
1.Flash treble files.(See Readme.txt)
2. Flash GSI.
3 Make sure your data partition is not encrypted.(Format in twrp)
4.Get adb permission.
5 Flash treble TWRP and flash Magisk.
6. Reboot.
How to get ADB permission1. Our treble TWRP V2 doesn't support MTP, so we need V1 to access Data partition.
2. After you flashed and boot into treble TWRP V1, You need to make sure your data partition is not encrypted. So you need to format data partition.
3. Enable adb before boot using this command in TWRP:
Linux/mac :
Code:
adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
Win :
Code:
adb push C:\Users\[COLOR="Red"]<userName>[/COLOR]\.android\adbkey.pub /data/misc/adb/adb_keys
4.Reboot, you will get adb permission.
How to kill[ Notch/B]
1. Move fxxknotchv6.apk to /system/product/overlay
2. Set permission 0664
3.Reboot
Attention1. HydrogenOS-Aonly-9-20190614-ErfanGSI will failed at Setup guide. You can run these commands to disable Setup guide.
Code:
adb shell
settings put global device_provisioned 1
settings put secure user_setup_complete 1
reboot
You can go into desktop. Then delete SetupWizard.apk.
2. MIUI will cost a long time on booting. If you can't enter desktop, try to showdown with power + vol up, then boot again.
3. OxygenOS need to flash OOSHDRfixAonly after flashing system image.
You can download it from Here.
@Sjll so do you think it's OK for daily use? thx.
f870103 said:
@Sjll so do you think it's OK for daily use? thx.
Click to expand...
Click to collapse
No,there still are some hugs.
Anyone installed one UI in our treble build? Does it work?
Hi ladies&gentlemens
I'm going to leave a guide here, on how to fix 5g on oos11 or custom ROMs, I'll try my best to be noob friendly
You can skip the first step, if enabling diag mode through engineeringmode.apk, dial *#801# works for you
1. You will have to root your phone, as engineeringmode.apk/dial *#801# does not work on this rom
go to the official magisk site, and download magisk 25.1 apk, make it zip by changing the file extension from apk to zip, after that flash it using ADB sideload, after how the device will boot up, open the magisk app (let it update), open settings, turn on zyigsk and enforce denylist, open configure denylist, and hide Google pay, google play services, google play store, and pretty much any banking apps
2. you will need to enable diag mode: enable USB debugging in developer options after that open cmd, terminal, PowerShell whatever you prefer on your pc, and enter ADB commands:
ADB devices
ADB shell
su
setprop sys.usb.config diag,adb
now your phone is in diag mode
3. google for qualcomm diag drivers and install it after that open the device manager and you will see 2 unknown devices there (model of your device *IN2013* for example) update them(by picking disk, driver urself) to Qualcomm HS-USB MDM Diagnostics 90B6
4. google for qpst tool and download it and install it after that, Open QPST, and you should see devices in ports and active phones list, click Start Clients -menu -> QPST EFS Explorer and select your device (SDX55) and wait a few minutes, then go to policyman directory and copy carrier_polixy.xml , carrier_polixy.xml_Subscription01 , lte_feature_restrictions file to your desktop or somewhere safe, it will be your backup just in case, after how you copied it, you will need to delete the same files (NOT FROM YOUR PC! FROM YOUR PHONE, ON QPST TOOL IN POLICYMAN DIRECTORY!)
5. download the zip from here, extract the files from the zip and copy them to the policyman directory, drop and drag them one each time
6. Congratulations now you can close qpst tools etc, and reboot your phone
links to useful sources will be in USEFUL.txt
DISCLAIMER: I DO NOT GUARANTEE THAT THIS WILL WORK ON ALL CUSTOM ROMS, I'VE TESTED IT ONLY ON PROJECT ZEPHYRUS AND OOS11, AND I AM PRETTY SURE THAT IT WILL WORK ON MOST OF THE CUSTOM ROMS IF NOT ALL, ALSO YOU AGREE THAT YOU WILL DO IT ON YOUR OWN RISK!!!