Related
[Deprecated] I do not have this zip anymore, please consider using something like this.
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Thanks
Sent from my A0001 using Tapatalk
thanks bro
Question, how to flash the zip
Working with a Note 4 trying to get usb debugging enabled, im also using Vysor to the device to recover data. What are your recomended steps to flash the zip you provided, just needing a lil help Thank you in advance Brian. ps The screen is cracked but comes to life.
Agent_fabulous said:
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Click to expand...
Click to collapse
How to flash the zip?
My display on my device doesnt work. Do you know if and how to turn on USB Debugging via adb in Windows 10?
Thanks for the release.
I need to enable ADB debugging.
I am able to goto stock recovery on my ZTE Z982 . I run ADB and try to install with sideload, but I received " Signature verification failed error 21 "
How do we go about signing this zip ?
hey guys the zip link is no longer availiable do you have an alternate link
please anyone can share the zip file, thanks.
hello, can anybody reupp?
not working
IS THERE A way to still get this the download is not working
Agent_fabulous said:
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Click to expand...
Click to collapse
Bump. I would love to use this tool, but OP's download link is not working.
I've got 2 things i want to adress, first of all my headunit occasionally boots up 2times (75% of the time), I will try a factory reset to see if that fixes it
secondly i want to be able to change bootanimation of my device, described below is my method but if i'm correct i will need to root my device to make it work), is this approach/method correct?
Change bootanimation OREO 8.1.0:
preparation
- Enable "read/write/execute" rights on the sdcard(android rootfolder) and allow file browser app root acces(fe: ES or FX explorer):
1. Enable USB debugging and (not applicable on headunits) OEM unlock in developper options
2. on pc Install android tools(adb) + android pc drivers, android device/emulator should be recognized in the devices list of my computer
3. connect pc to android headunit with USB (or wifi if using adb over wifi)
/* !Make a backup first from recovery mode or bootloader mode */
4. On PC, go to the android tools (where adb.exe is located), open a cmd prompt(Shift + right click)
in the cmd prompt:
4.1 adb devices - device should be listed here
4.2 adb reboot recovery - should reboot all connected devices into recovery mode, make a backup from the system and apps here, upon completion and in preparation of a factory reset: clear cache memory and app data/memory, upon completion, do a factory reset.
5 test. edit read/write/execute permissions(will probably be a no) and double boot "bug"
Actually change the bootanimation (with the headunit itself, using ES/FX file explorer):
1. place the downloaded bootanimation zip file to the sdcard, either "sdcard", "sdcard\system" or "sdcard\system\media"
2. change permission of the zip file to 644(read/write/execute)
3. open the stock "Bootanimation" app and select the newly added zip
4. reboot to test
If this doesnt work, my headunit needs to be rooted?:
I looked at numerous video's and tutorials to root a device(offcourse all diffrent devices and android versions) and i have some questions now.
For a car headunit, how do i know what files i need and what should i pay attention to, i have a china model(seicane) that uses an alwinner T8 processor, i have an android version(oreo 8.1.0), MCU version and a system version (not sure what this is). can i install custom recovery and any android version i want on this headunit, will it be compatible or how can i find out wether its compatible or not.
There are so few tutorials on how to root an android oreo headunit and i'm not sure the one(s) that is availlable will work for my device
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Matra-PB said:
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Click to expand...
Click to collapse
That may not be the problem I've hear a lot of people are having this problem. But it's a good place to start if he hasn't tried it yet.
Success story upgrading A500 in 2019 July
finneus_ said:
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Click to expand...
Click to collapse
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
Step1a: Install a File Manager app from the Google playstore. This will help you extract the CPU ID and convert it with the SBK tool to get the SBK number/string. important steps SBK tool was available in file - SBCalc_v1.1.ZIP available in this forum.
STEP 2b: SUPERUSER and SUPERSU installation
1. Install SuperUser.apk first.. (IMP - Its available in this forum. Its like a base version for superSU to install over. If you do not install SuperUser.apk, then each time you try installing SuperSU, you would get an error message about a SU file being incompatible.)
2. Then install an older version of SuperSU downloaded from the website - filename -> eu.chainfire.supersu_v2.65-265.ZIP . Newer versions will not work. U got to install an older version as new version seems to be a paid SW.
3. Next Open SuperSU app on your tablet and let it update itself a couple of times each time opening and closing the app after the upgrade.
4. Remove SuperUser.apk file as now its no longer needed.
5. Now that you have ROOT access and SuperUSer access
6. Install Titanium Backup. File name in this forum- update-recovery-TWRP-rev2.0-beta4.ZIP . This will help you to flash/upgrade ROM software on your tablet.
Twrp 2.8:
http://www.mediafire.com/file/e7wpny5f39vw3pc/update-recovery-TWRP-rev2.0-beta4.zip/file
Compressed Archive (.ZIP)
File size: 4.91MB
Uploaded: 2018-08-14 21:40:26
https://www.mediafire.com/download/e7wpny5f39vw3pc
STEP 3: Install an Unlocked Bootloader i.e. unlocked bootloader Skrillax v9 - file name in this forum BabSector.rar or A500-Bootloader-Nvflash.ZIP
Once you have reached this step, you now have the basic tools needed for the final ROM upgrade of the tablet.
I did get error message after the reboots that happened after Unlocking the Bootloader. Someting about a LNX partition not being okay or some such msg. Each time I just WIPED the Cache and selected similar options to wipe System, Data, User, Dhelvic cache (spelling incorrect) etc. Since you have not installed the final OS or ROM for your tablet yet, no harm in deleting these partition data. Actually its recommended to wipe, format in f2f formats etc. all of which is possible using the TWRP Recovery software you installed in step 2. Choose Recovery menu option each time the tablet boots or gives errors.... using the volume rocket and power buttons. More info -> Go through this thread and install unlocked bootloader.
https://forum.xda-developers.com/showthread.php?t=1622425
Flashing Bootloader Steps
-------------------------
1. generate your SBK from cpuid
2. put tab in APX by holding reset (small pinhole bottom right side)
and pushing power for 3-4 sec. - then release reset approx 1 sec. later
the screen should be blank and power button should be lit - plug in USB to PC.
2. Run A501 A.bat - when finished reboot tab to recovery (win 7 and under
right click on A501 A.bat and select Run as Administrator)
3. run Recovery(power and volume-) ->WIPE -> "Advanced wipe ->System (only)and swipe to wipe.
4. unplug USB and reboot tab to APX
5. plug in USB afer it is in APX mode -> Run A501 B.bat (win 7 and under
right click on A501 B.bat and select Run as Administrator)
Bootloader unlock tutorial
--------------------------
Step 1: Get your cpuid - https://forum.xda-developers.com/showthread.php?t=1624645
Step 2: Convert it into an SBK - https://forum.xda-developers.com/showthread.php?t=1810618
Step 3: Download the A500 drivers
- http://www.mediafire.com/file/pde8rojv1t8gnif/USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501.zip/file
Step 4: Download the files to install the bootloader
- http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
Step 5: Follow the instructions in "how to.txt"
Step 6: Download a rom and flash in twrp
This tutorial is based of
https://forum.xda-developers.com/showthread.php?t=2450119 thread so big thanks to KaijiKun .
Bootloader unlock files:
http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
STEP 4. Downloaded file omni-4.4.4-20150210-a500-IconiaHD.ZIP as I was not sure version omni 5.1.1 was as stable as Omni4.4.4 reading all the threads in this forum.
First rename the downloaded OMNIROM file as update.zip .
OmniRom 4.4.4
http://www.mediafire.com/file/ghd72j3g618kk9g/OMNIROM-5.1.1-Tegraowners_ROM_v13t2.zip/file
File size: 244.66MB
Uploaded: 2015-04-05 17:40:14
STEP 5: Install another tool adb_fast.ZIP. This tool is also available in this forum.
Note:You need to copy the update.zip file to your computers folder where this tool adb_fast is installed. In mine it was C:\Program files (x86)\Minimal ADB and Fastboot folder. This adb_fast file creates an application shortcut on your computer desktop. Clicking on the short cut launches adb and fast boot programs I mentioned at the beginning.
STEP 6: Copy the file to the SD card (16GB) of your tablet.
Run the adb_fast tool from your desktop shortcut. This will open a Command Prompt type black screen window where you can enter the code as given below. Note you may need to see how your SD card is listed in a file manager in your computer
Code:
adb push update.zip /mnt/sdcard/update.zip --- NOTE: this creates mnt folder on internal storage and I had to then move the file using TWRP recovery tool installed in step 2, to the SD card.
adb push < ------- is the push command.
rom.zip < ------- is the name of the Rom zip file.
/sdcard < ------- is the location your pushing the Rom to.
E.) Reboot tablet with Power+Down Arrow i.e. This will start the Upgrade process for the tablet to OMNIROM 4.4.4
-- Power Button + UP VOLUME pressed... then release Power button after LED lights.
-- System will boot to commmand prompt
STEP 7: Install GAPPS using pico gapps short version and Wipe Data/Factory reset ----------------?>and wipe cache partition?
Reboot after 1st reboot
G.) https://opengapps.org/ to install a minimal version of Google Apps on the tablet.
File name -> pa_gapps-modular-mini-4.4.4-20150410-signed.ZIP
Root tablet again and install SuperSU if you need it
other info.
You can use TWRP to flash the OmniROM on the tablet or you can use the following in worst case senario to do the same.
Code:
fastboot devices
fastboot flash update.zip -- check if syntax is ok from threads in this forum
fastboot reboot-bootloader
copied below from other threads ---->
I find that a large amount of complaints in developer threads are due to people not properly wiping before a flash.
Of course there is times when a 'dirty' flash is fine, but if you're ever not sure, wipe as cleanly as possible.
fastboot allows for about the cleanest of wipes by the way. And each partition can be done separately too.
Code:
fastboot erase system
fastboot erase data
fastboot erase cache
can all be done individually, but to do these all in one command
Code:
fastboot erase system -w
If possible I recommend to do these steps before flashing a ROM, and now that you know you can do this all within fastboot mode i suggest to try it out, its quick and painless!
Don't forget to wipe your kernel too! (fastboot erase boot)
~Important~ If your device uses an emulated SD card (as in no removable micro SD but an SD partition on phone)
Then be careful wiping data/userdata as this will erase all contents of internal SD - you are forewarned!
ADB= Android Debugging Bridge (ADB)
[TOOL]Minimal ADB and Fastboot [2-9-18]
https://forum.xda-developers.com/showthread.php?t=2317790&page=12
First a short explanation:
Fastboot, like ADB, is a tool to communicate from PC to Android phone. There are times when it is a must to use, and times when it is just helpful.
ADB is used within your recovery or within your OS, but when you are in bootloader mode and need to communicate with your phone then you need fastboot.
And you may ask why would i ever need this?
Well many reasons. Main one is knowledge, learning the ins and outs of fastboot, like learning ADB, can get you out of many jams.
And if you want to unlock your bootloader this is done through fastboot. Granted HTC's unlock is... well crap, but for a Nexus this is how its done.
One other reason I have to stress is learning for safety reasons, This is about the safest way possible to flash firmware to your phone (ie Radio, Hboot, Recovery)
Lastly you may want to know the limitations,
There are many of course, this isnt JTAG, it will not resurrect a hard brick, but it often save peoples phones from 'soft bricks' and lots of time when know how and when to use it.
Think of fastboot as the program that takes over when ADB cant be used, it works with firmware more than software.
https://forum.xda-developers.com/showthread.php?t=1624645&page=3
GUIDES
---------------
Civs Guide to flashing the bootloader http://forum.xda-developers.com/showthread.php?t=1622425
Walkthrough using APXFLASH tool at Step 6 http://forum.xda-developers.com/showthread.php?t=1624645&page=2
From Civato's OP of The Guide: nvFlashToolPackages
Skrilax_CZ bootloader thread http://forum.xda-developers.com/showthread.php?t=1619913 and should be "required reading" for anyone mucking about in their tabs internals!!!!
Rollback to HC
jazzyjames guide http://forum.xda-developers.com/showthread.php?t=1516012
Iconia Root http://forum.xda-developers.com/showthread.php?t=1138228 /gingerbreak: For returning to Honeycomb
----------------
To get my CPUID, I have followed the steps below:
Open yr file explorer, esfile explorer is a great one....navigate to:
/sys/firmware/fuse/acer_cpuid - add a zero to the front!
To get CPUID get a Root browser of some sort and go to sys/firmware/fuse/acer_cpu_id
convert my CPUID into SBK?
--------------------------
https://forum.xda-developers.com/showthread.php?t=1055354&page=6
What Does Root Give Me?
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
o Themes
o Core apps (maps, calendar, clock etc)
o Recovery image
o Bootloader
o Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
o Boot images
o Add linux binaries
3. Run special apps that need more control over the system
o SuperUser (lets you approve or deny the use of root access to any program)
o Task Manager For Root (Lets you kill apps that you otherwise could not kill)
Tether apps (like the one found at [android-wifi-tether.googlecode.com])
4. Backup your system
o You can make a folder on your SDCARD and backup all of your .APK files to your SDCARD (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su <enter> reboot <enter>)
Turn the rotation lock off.
-------------------------------------------------------
SUMMARY - Regardless of version, rooting is the same... next
** Unlock the bootloader.
** Fastboot flash a Custom Recovery (TWRP).
** Download to the Tablet, Chainfire's SuperSU root updater .zip
** Boot into the previously fastboot flashed Custom Recovery, and flash the SuperSU updater .zip.
** Reboot - you're rooted.
-------------------------------------------------------
PS. I tried to maintain a log in Notepad during my upgrade. Unfortunately did not write detailed instructions and link to required files. Above is a summary of what worked for me.
Can not root
sukasis said:
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
......
Click to expand...
Click to collapse
Hi sukasis, i was unable to root the tablet. I download all and run the runit.win.bat (trying normal, as admin, and open a cmd as admin and then navigate to the bat to execute).
- It say device connected
- Then push 7 files correctly
- Executing of the main script. (it freeze here a lot of time)
Then error: protocol fault (no status)
The file "su" isn't created
Not getting root!
I try in USB 3.0 and 2.0 same error.
I have windows 10.
I uncheck the Debugging mode and it's bring another error, so i believe the connection is good because in debug mode can push files.
I don't know whate else i can do.
YOUR WARRANTY IS NOW VOID! I am not responsible for anything that could happen, dead sd card, bricked phones, you name it. You chose to install this software and you face the risk of any bugs that may affect you. This is just a warning incase anything goes wrong
ISSUE: FASTBOOT Might not work on windows 10 version 2004, a solution is to use a Linux virtual machine to use fastboot commands. Test it out first as you might be lucky and it could work for you.
A complete guide on how to either just root the razer phone 2 and/or install a gsi with everything working.
The sections are: Basics - Installing TWRP - Rooting - Installing a GSI + Root - Passing safety net to use baking apps, certain games etc.
Basics: (You will have to factory reset if you have not unlocked your bootloader before)
Download this and this file, un zip them both and move them to a known directory such as C:\ADB
Then on your phone, go into developer options and enable OEM/Bootloader unlocking, and after that reboot into the bootloader by holding POWER + VOL DOWN and plug the phone into your pc (I recommend you connect it to a USB 2.0 port, as USB 3.0 might give you issues with the fastboot commands)
Then we need to install bootloader drivers onto our phone, so open device manager, click the drop down menu next to Android Device, right click on Android and select Update Driver, then select Browse my computer for driver software, Let me pick from a list of available drivers on my computer, Show all devices, Have disk and navigate to your folder where you extracted the .zips (in my case C:\ADB) and open the usb_driver folder and select android_winusb.inf. In the next menu select Android Bootloader Interface, proceed through the warning and install it.
To unlock the bootloader open a cmd window in the directory of your platform-tools folder, which in my case would be C:\ADB\platform-tools (type cd C:\ADB\platform-tools in cmd) and run two commands: fastboot flashing unlock (after each one select yes on your phone and let it reboot - it might take a while) and fastboot flashing unlock_critical
To install the arter97 kernel/TWRP: (keep your phone in the Bootloader and plugged into the pc)
Download both the .zip and .img file from this link (i am using r12 intentionally as it causes less issues) and download this zip file as well
Move both .zip files onto your phones SD CARD (important) and rename the .img file on your PC to Boot.img and place it into your platform-tools folder (C:\ADB\platform-tools in my case)
Open a command prompt window and like before change the directory to the platform-tools folder, then run two commands: fastboot flash boot_a boot.img and fastboot flash boot_b boot.img
Now using the volume keys select the Recovery Mode option in the bootloader and press the power key to select it, if it asks for a decryption password cancel it, and if it asks to allow system modifications swipe to allow it
Go to the Install section and navigate to external_sd and navigate to the arter-r12.zip you installed, then click it and swipe to flash, after that flash the f2fs zip and after it's complete back out to the main menu, click reboot and select recovery
Once you are back in recovery, go to Wipe and select Format Data (this will not erase your sd card if it is set as external storage) and type yes
If you don't want to root then to reboot to system go into Reboot and select System, TWRP will ask you if you want to install their special app, DO NOT INSTALL IT, CLICK ON DO NOT INSTALL.
Now you are ready to proceed to the next step(s) (these are short now don't worry)
To just root and stay on the stock ROM:
Download magisk 20.1 (works better) from here and move it onto your phone sd card by going to the main TWRP menu, selecting Mount then SD card and you should be able to transfer the file onto the sd card directly from your PC
Then simply flash the magisk 20.1 zip in TWRP as we did before and you can now reboot system (make sure to not install the TWRP app)
Magisk Manager will prompt you to update magisk, DONT do it. You can however install the latest magisk manager update
To install a GSI and Root: (lineageOS is what i have linked here, however this is not the only one you can use, make sure you NEED gapps before flashing it incase they are included anywhere)
Firstly, to have bluetooth working go to Mount and select Vendor, go back, select Advanced then File Manager then navigate to /vendor/overlay/ and delete both BluetoothResCommon.apk and RazerAuraBluetoothRes.apk
Then download the latest arm-64-bvN .img file from here, unzip it on your computer and move the .img file to your phone. If you also want gapps (google apps) download this file and move it onto your SD card as well
Now, head to the TWRP Install section, at the bottom select Install Image, select the downloaded lineageOS (or your own gsi) .img file, in the next screen select System Image and swipe to flash it.
Once it has flashed back out to the main screen and click on Wipe, then select Advanced Wipe, then select System, Repair or change file system, and finally press Resize and swipe to do it, if it fails then re do this step
Then go back into the Install section and flash the opengapps zip file and after that the magisk zip file
Now you can reboot to system (might take a couple minutes) and set up the phone.
If you notice it is running slowly go into settings > Phh treble settings (might have to force close app once for it to appear) > Misc Settings > Force FPS > and select the 120.00001 at the bottom (top numbers are 1080p and bottom numbers are 1440p)
Finally, to pass safetynet:
Head into magisk manager, go to its settings and enable Hide Magisk, then call it Manager and allow it to reinstall itself, after that enable Magisk Hide in the settings aswell (hide your banking apps with this or any game that wont boot due to ROOT)
Then go into the magisk downloads section and search for the ArCore module, install this, reboot and your safetynet will pass on a gsi
This is my first xda post so my formatting may be bad but i hope it can help some people if you have any questions drop a comment and please like the post if it helped you for more people to see it.
Have a good day
Usyless said:
YOUR WARRANTY IS NOW VOID! I am not responsible for anything that could happen, dead sd card, bricked phones, you name it. You chose to install this software and you face the risk of any bugs that may affect you. This is just a warning incase anything goes wrong
A complete guide on how to either just root the razer phone 2 and/or install a gsi with everything working.
The sections are: Basics - Installing TWRP - Rooting - Installing a GSI + Root - Passing safety net to use baking apps, certain games etc.
Basics: (You will have to factory reset if you have not unlocked your bootloader before)
Download this and this file, un zip them both and move them to a known directory such as C:\ADB
Then on your phone, go into developer options and enable OEM/Bootloader unlocking, and after that reboot into the bootloader by holding POWER + VOL DOWN and plug the phone into your pc (I recommend you connect it to a USB 2.0 port)
Then we need to install bootloader drivers onto our phone, so open device manager, click the drop down menu next to Android Device, right click on Android and select Update Driver, then select Browse my computer for driver software, Let me pick from a list of available drivers on my computer, Show all devices, Have disk and navigate to your folder where you extracted the .zips (in my case C:\ADB) and open the usb_driver folder and select android_winusb.inf. In the next menu select Android Bootloader Interface, proceed through the warning and install it.
To unlock the bootloader open a cmd window in the directory of your platform-tools folder, which in my case would be C:\ADB\platform-tools (type cd C:\ADB\platform-tools in cmd) and run two commands: fastboot flashing unlock (after each one select yes on your phone and let it reboot - it might take a while) and fastboot flashing unlock_critical
To install the arter97 kernel/TWRP: (keep your phone in the Bootloader and plugged into the pc)
Download both the .zip and .img file from this link (i am using r12 intentionally as it causes less issues) and download this zip file as well
Move both .zip files onto your phones SD CARD (important) and rename the .img file on your PC to Boot.img and place it into your platform-tools folder (C:\ADB\platform-tools in my case)
Open a command prompt window and like before change the directory to the platform-tools folder, then run two commands: fastboot flash boot_a boot.img and fastboot flash boot_b boot.img
Now using the volume keys select the Recovery Mode option in the bootloader and press the power key to select it, if it asks for a decryption password cancel it, and if it asks to allow system modifications swipe to allow it
Go to the Install section and navigate to external_sd and navigate to the arter-r12.zip you installed, then click it and swipe to flash, after that flash the f2fs zip and after it's complete back out to the main menu, click reboot and select recovery
Once you are back in recovery, go to Wipe and select Format Data (this will not erase your sd card if it is set as external storage) and type yes
If you don't want to root then to reboot to system go into Reboot and select System, TWRP will ask you if you want to install their special app, DO NOT INSTALL IT, CLICK ON DO NOT INSTALL.
Now you are ready to proceed to the next step(s) (these are short now don't worry)
To just root and stay on the stock ROM:
Download magisk 20.1 (works better) from here and move it onto your phone sd card by going to the main TWRP menu, selecting Mount then SD card and you should be able to transfer the file onto the sd card directly from your PC
Then simply flash the magisk 20.1 zip in TWRP as we did before and you can now reboot system (make sure to not install the TWRP app)
Magisk Manager will prompt you to update magisk, DONT do it. You can however install the latest magisk manager update
To install a GSI and Root: (lineageOS is what i have linked here, however this is not the only one you can use, make sure you NEED gapps before flashing it incase they are included anywhere)
Firstly, to have bluetooth working go to Mount and select Vendor, go back, select Advanced then File Manager then navigate to /vendor/overlay/ and delete both BluetoothResCommon.apk and RazerAuraBluetoothRes.apk
Then download the latest arm-64-bvN .img file from here, unzip it on your computer and move the .img file to your phone. If you also want gapps (google apps) download this file and move it onto your SD card as well
Now, head to the TWRP Install section, at the bottom select Install Image, select the downloaded lineageOS (or your own gsi) .img file, in the next screen select System Image and swipe to flash it.
Once it has flashed back out to the main screen and click on Wipe, then select Advanced Wipe, then select System, Repair or change file system, and finally press Resize and swipe to do it, if it fails then re do this step
Then go back into the Install section and flash the opengapps zip file and after that the magisk zip file
Now you can reboot to system (might take a couple minutes) and set up the phone.
If you notice it is running slowly go into settings > Phh treble settings (might have to force close app once for it to appear) > Misc Settings > Force FPS > and select the 120.00001 at the bottom (top numbers are 1080p and bottom numbers are 1440p)
Finally, to pass safetynet:
Head into magisk manager, go to its settings and enable Hide Magisk, then call it Manager and allow it to reinstall itself, after that enable Magisk Hide in the settings aswell (hide your banking apps with this or any game that wont boot due to ROOT)
Then go into the magisk downloads section and search for the ArCore module, install this, reboot and your safetynet will pass on a gsi
This is my first xda post so my formatting may be bad but i hope it can help some people if you have any questions drop a comment and please like the post if it helped you for more people to see it.
Have a good day
Click to expand...
Click to collapse
Thank you excellent post just what I needed.
eedwin101 said:
Thank you excellent post just what I needed.
Click to expand...
Click to collapse
I'm glad it helped you
Usyless said:
I'm glad it helped you
Click to expand...
Click to collapse
If you don't mind what other GSI ROMs have you tried that worked well with this phone I am particularly interested in the Google pixel Android 11. Thanks again you have extended the life of this phone for me.
eedwin101 said:
If you don't mind what other GSI ROMs have you tried that worked well with this phone I am particularly interested in the Google pixel Android 11. Thanks again you have extended the life of this phone for me.
Click to expand...
Click to collapse
I know that phhussons AOSP works on this phone with no issues aswell, you might have to use securize to get safety net to pass tho.
android 11 will boot on this phone however iirc you won't be able to hear and other people won't hear you in phone calls.
havoc gsis I believe works but I haven't tested it and I have only heard of one person using it.
BLISS/LOSQ/CAOS don't work on this phone at all.
and after that I don't think there really is many more GSIs that work as they just won't boot for bizarre reasons
How about text messaging. Currently i have not been able to get SMS to work with any GSI on Android 10. Are you able to send and receive text messages? Did you have to do anything to get it working? If so, let me know because i have been having a heck of a time with it.
_Sherrif said:
How about text messaging. Currently i have not been able to get SMS to work with any GSI on Android 10. Are you able to send and receive text messages? Did you have to do anything to get it working? If so, let me know because i have been having a heck of a time with it.
Click to expand...
Click to collapse
oh this issue... are you on T-Mobile by any chance as if you are there is no fix yet and you will have to wait for official lineageOS.
I am on three (UK) and everything works perfectly.
Usyless said:
oh this issue... are you on T-Mobile by any chance as if you are there is no fix yet and you will have to wait for official lineageOS.
I am on three (UK) and everything works perfectly.
Click to expand...
Click to collapse
No AT&T.
_Sherrif said:
No AT&T.
Click to expand...
Click to collapse
you might be able to use this fix (it's a magisk module) as it is made for AT&T https://t.me/razer_phone/14202
its called a volte fix but it should help with sms, if it doesn't work you can just remove the module, reboot then delete some qualcomm.ims app (should be shown in your app list)
_Sherrif said:
No AT&T.
Click to expand...
Click to collapse
or you could try this: https://t.me/razer_phone/12949
install instructions shown in the message
Usyless said:
you might be able to use this fix (it's a magisk module) as it is made for AT&T https://t.me/razer_phone/14202
its called a volte fix but it should help with sms, if it doesn't work you can just remove the module, reboot then delete some qualcomm.ims app (should be shown in your app list)
Click to expand...
Click to collapse
Aight! Definitely worth a try. Tried everything else.
Thank you!
Thanks!! Excellente guide, very important your note : "I recommend you connect it to a USB 2.0 port", with usb 3 doesn't work bootloader commands.
frannet said:
Thanks!! Excellente guide, very important your note : "I recommend you connect it to a USB 2.0 port", with usb 3 doesn't work bootloader commands.
Click to expand...
Click to collapse
Thanks
It doesn't necessarily not work with usb 3.0, for some people (and for me) it works with a usb 3.0 port however for a lot of people they have issues with it.
I will add it tho.
Usyless said:
Thanks
It doesn't necessarily not work with usb 3.0, for some people (and for me) it works with a usb 3.0 port however for a lot of people they have issues with it.
I will add it tho.
Click to expand...
Click to collapse
It's strange. With my razer blade it has not worked (usb 3) but with a Dell Precision with a one port usb 2, work fine. I was going crazy.
frannet said:
It's strange. With my razer blade it has not worked (usb 3) but with a Dell Precision with a one port usb 2, work fine. I was going crazy.
Click to expand...
Click to collapse
Yeah I remember I helped somebody else root their phone and it didn't work with their razer blade either, they had to use some very old laptop.
Usyless said:
Yeah I remember I helped somebody else root their phone and it didn't work with their razer blade either, they had to use some very old laptop.
Click to expand...
Click to collapse
Guys, sorry for the off-topic, is available the dark mode for razer menu? i can't find it
frannet said:
Guys, sorry for the off-topic, is available the dark mode for razer menu? i can't find it
Click to expand...
Click to collapse
What do you mean razer menu? if you mean settings then it's a MAYBE.
on a gsi, dark mode is available
on stock android 9 it is possible. you need to use smali patcher to enable signature spoofing and then use swift theme installer alpha (substratum themes won't theme the settings)(you need to contact the developer to get the alpha version as others wont work)
Usyless said:
What do you mean razer menu? if you mean settings then it's a MAYBE.
on a gsi, dark mode is available
on stock android 9 it is possible. you need to use smali patcher to enable signature spoofing and then use swift theme installer alpha (substratum themes won't theme the settings)(you need to contact the developer to get the alpha version as others wont work)
Click to expand...
Click to collapse
Yeah I talk about the settings menu. I thought dark mode was available for all android versions ??
frannet said:
Yeah I talk about the settings menu. I thought dark mode was available for all android versions ?
Click to expand...
Click to collapse
yeah tbh idek, all the android fanboys were saying at how long it took apple to make a dark mode but it was implemented in android 10 later than ios 12 I swear ?
but as you are rooted you should be able to get a dark mode, just do as I said with smali patcher and the swift installer alpha
i
Usyless said:
yeah tbh idek, all the android fanboys were saying at how long it took apple to make a dark mode but it was implemented in android 10 later than ios 12 I swear ?
but as you are rooted you should be able to get a dark mode, just do as I said with smali patcher and the swift installer alpha
Click to expand...
Click to collapse
Hahaha, yeah, If I'm honest, dark mode in iOS work fine, very fine, normally I use my iPhone 11 and I play with android devices for.. for play with the OS and develoment OS, and as second andriods phone for maybe.... I go to check the gsi mode, thanks guy!!
Update: At the time of writing this, I completely forgot that I am running Linux Mint - Cinnamon 20.1 on my laptop, which connects the bluetooth with my phone just fine. However, it did NOT work when I booted into windows and tried it. I am not sure why this is, but just beware. I recommend that you look into it yourself and see if you can find a resolution that works for you if you aren't using a linux os.
Hi everyone, after using another guide on here by Marcos8760, I noticed that there were a lot of things missing from the steps layed out, and decided to create my own guide with every step that should be done to have a fully functional Razer 2 with Android 11 OS. I will be using a part of his guide in this tutorial, and the link to his if you want to check it out is: https://forum.xda-developers.com/t/guide-android-11-gsi-with-gapps-and-root-magisk.4216117/
**DISCLAIMER**
First, I am not responsible for any bricked devices or errors that occur. This is completely at your own risk.
Second, this OS is NOT supported by Verizon. If you use Verizon then this will not be able to work on your phone.
Third, MAKE SURE that you have backed up all your files and data before doing this, again, I am not responsible
for you losing your data, because you will lose it if it isn't backed up, and I have warned you to do so.
Fourth, any commands will be in '' quotes, do not type these into your own cmd window, they are just to indicate what the commands are.
Last, This is not a troubleshooting guide, I am not covering how to fix errors, only simply how to install and get working with the Android 11 GSI. If there are errors please try to do research and resolve them on your own.
Before we begin anything, we need a few tools. These are the download links to all the files you will need to complete this process.
1. You will need a program such as WinRar, 7zip, or my personal fav, WinZip, to be able to extract these files, make sure you have one of these installed before proceeding.
2. We need to have a backup of the stock firmware in case of any kind of bootlooping or other bricking that might occur that you can revert back to. Extract this.
Link: https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3201-user-full.zip
3. This is the link to the GSI we will be installing. If you want a rooted system, you need to download system-roar-arm64-ab-vndklite-gapps.img.xz file. This will allow you to install Magisk and enable Google's Play Protect which is what this guide will be about, of course you can choose your own, however you will have to figure out how to get play protect certified yourself. Extract This.
https://github.com/phhusson/treble_experimentations/releases
4. We need the kernel that allows TWRP to be installed, which is the file manager we will be using for some of the programs we need to install, as well as being able to boot the phone up during this process. Extract This.
https://github.com/francisrosario/a...load/4.0/TrinityKernel-kernel-r4-20200512.zip
5. This is a file system program used to write large scale data with much faster read and write speeds for Linux and Android systems alike. Here is a link to learn more about it: https://c.mi.com/thread-2487060-1-0.html
*DL link: https://arter97.com/browse/aura/f2fs/20190114/f2fs_fstab.zip
*Leave this as a zip file, you just simply need to save it.
6. Here is the link to the latest Magisk version. (Needed to root the device) Leave as zip file.
https://github.com/topjohnwu/Magisk/releases/tag/v21.3
7. We need a program called VoLTE Fix-It. This is needed to enable your mobile network and data for LTE on this GSI.
*https://github.com/KhushrajRathod/VoLTE-Fix
*Just press the green 'Code' button and download as zip. Leave this as a zip file as well.
8. We need the Android ADB Driver to be able to enter commands to install everything.
https://developer.android.com/studio/run/win-usb Click download zip, accept agreement, and download and extract.
9. We need Android SDK Platform Tools to be able to run fastboot and adb commands. Extract this.
https://developer.android.com/studio/releases/platform-tools
10. Lastly, (I promise), you need the Qualcomm Android USB Driver. The link explains why. Extract this and go through the setup and install.
https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
Now we can begin the process.
First, copy all of the files in the aura-p-release folder, and paste them into the platform tools folder where all of those files are. Then enable USB debugging on your phone. Go to settings, click on About Phone, scroll to bottom and tap "Build Number' 7 times. You are now in dev mode. Search in the search bar for usb debug, tap it, then enable it and select allow.
To install the Android ADB driver, right click on start (Windows icon in bottom left of task bar), select device manager. Then we need to go into fastboot mode. Hold both volume buttons and power button down, be patient, it takes a second. When the screen goes black immediately press and hold the Volume down button for at least 3-5 seconds until a screen comes up that has an option to 'Restart Bootloader' at the top. Now we can install the driver. You should have device manager open, an option called 'Other devices' should come up, with Android that has a yellow exclamation mark by it. If it doesn't, unplug and replug the phone's usb, and it should. Once that shows up, right click and select update driver. Select Browse computer, select Let me pick. Show All devices should be selected, if not, go ahead and do so, then click next. Select 'Have Disk', Select Android ADB Interface, click browse and go to the folder where you downloaded the ADB driver, then select 'android_winusb' and click ok. Click ok again, a warning will come up, you don't need to worry it is needed to install this OS, so go ahead and click yes. It should install, you can close out when it is finished.
Next, in file explorer open the folder with all of the platform tools and aura-p-release files. Erase what is in the address bar, and type 'cmd', press enter. This will open a command prompt window in this location. Now, type in the cmd window, 'fastboot devices' and a serial number should show up. If not, then you have done something wrong or missed a step and need to uninstall the driver and go back into fastboot mode and do it again, or refer to the last disclaimer I made. Now, if the serial number did show, we can proceed. First we need to unlock the bootloader (if it isn't already) to be able to root and install. Type in the cmd window 'fastboot flashing unlock' and press enter, a confirmation should pop up on the device, use the volume buttons to navigate and the power button to select and confirm. When thats done, type in 'fastboot flashing unlock_critical', again a confirmation should come up so just do the same.
We can get into the meat of the installation process now.
You should still be in fastboot mode. In the cmd window, type 'fastboot flash system' and drag and drop the system-roar file you downloaded and extracted in file explorer into the cmd window.
Your command will look a little something like this: fastboot flash system C:\Users\user\Desktop\system-roar-arm64-ab-gapps.img
The file path will be different depending on where you downloaded the image to.
Wait until it says complete or something similar like done and has no errors. Then, its time to flash the kernel. Navigate to the where you downloaded the TrinityKernel file, open it. There should be a .img filed simply called 'boot.img'. Go back to your cmd window, and we will be typing in: "fastboot flash boot" then drag and drop the boot.img file, like you did with the system file, again, wait until it says done or complete and has no errors.
After that is done, use the volume buttons to select restartt bootloader with your power button on your phone. When it reboots, go to recovery mode, check never show this screen, and swipe where it says to swipe. Go to the wipe menu and then tap on format data. Type yes and then press enter/ok. Go back to your computer and open file explorer.
Next, copy and paste the f2fs zip file using windows explorer into the Razer 2's internal storage.
Head back to your phone, and press install. Scroll down until you find the zip file and press it and install it. (ignore the errors that may or may not be there) After that go back to the TWRP home screen, button that looks like a house at the bottom in the middle, go to the reboot menu, then reboot into recovery. When it reboots, go to wipe menu, and tap on format data and type in "yes" and tap ok again. Click on "don't install" because you don't need the TWRP app on your phone.
Next we need to install magisk to enable google play protect cert and have a rooted system. Just do the exact same thing that you just did with the f2fs file, except do not format data this time.
Select mount and check all the boxes. Go back to home page and select install, scroll to magisk and swipe to install.
Now, this is where you have to make a big decision. Bluetooth on this rom is a fickle son of a gun. I have tried to make it work on a pc that doesn't have bluetooth software built into it for a very lengthy amount of time, trying all sorts of things. The only way I could get it to connect is by setting it as a device to control with my keyboard and mouse. Maybe you will have better luck, but I have confirmed that the bluetooth works on devices with already built in bluetooth software. It works perfectly on my laptop and in my car. So, if you want to proceed with this, then I will tell you, if not, you can skip over it.
Select advanced on the home menu, go to file manager, select vendor then overlay. delete BOTH the bluetoothcommon.apk and razeraurabluetooth.apk.
This step applies to those who skipped the bt part as well. Go back to home, select reboot and click system, when it reboots, select allow usb debugging, DO NOT DO ANYTHING ELSE. THIS IS CRITICAL. Go back to your cmd window and type "adb devices", a serial number should show, then type the following cmds in order: "adb root", "adb shell", "mount -o remount,rw /", "mv /bin/resetprop_phh /bin/phh-resetprop" - if this one gives an error saying its in use, don't worry, just do the next cmd, which is "phh-securize.sh"
If the 3rd cmd gave the error, the last cmd will ask if you want to confirm it, click y for yes for each option it gives, it should go thru and the device should reboot.
Now then, it may seem slow during set up, but set it up like normal. Everything should be well and good. after you finish setup, to enable better fps, go into settings, select phh settings, select misc features, scroll down to and click on 'force fps', select the last option to have 120fps, but you have to do it twice because for some reason it doesn't change to the very last option the first time.
Now, we have to setup your mobile network with volte, it is a program that allows LTE coverage from your carrier to enable data on custom gsi roms. Now, go to the volte fix it zip file in file explorer, copy paste to the phone's internal storage. Go into fastboot mode, select recovery, it will boot into twrp. Do the same thing as the other zip files, install then select and swipe. Now press home button and select reboot, click system. Go to phh settings, click ims features, check the boxes on the bottom 2 options, click on create ims apn, it wont do anything, then click install ims apk, when it is done a notification will pop up on the bottom that says to reboot, you may now reboot the phone. Once it is booted up, go to network and internet, select mobile network, change pref network type to lte, then enable volte. You should have full service of your mobile network.
There are a few last things. The default camera sucks, I've tested some from the play store, and YouCam is by far the best free camera you can get from there. 2nd, to enable the backlight on the Razer 2, download and install logo+ apk, grant it root perms, and you can select the effects and colors you want it to be. This should be everything to get you going on the gsi. If you want to do custom things like custom boot animations or alarm sounds or whatever, download either root browser or pay for root explorer on the play store, and you can look up how to do whatever you want and you can do it through one of those. There it is. Enjoy the new os and have fun with it!
**IF YOU DO RUN INTO A BOOTLOOP OR ANY SORT OF BRICKING, RETURN TO FASTBOOT MODE BY HOLDING POWER, AND HOLD VOL DOWN WHEN THE SCREEN TURNS BLACK. You can go into platform folder, find the flash_all.bat file, double click and it should bring the phone back to original stock, and you can start over. IF YOU HAVE ANY OTHER ERRORS DURING THIS PROCESS PLEASE TRY TO FIND THE RESOLUTION YOURSELF. This is NOT a troubleshooting guide.**
Nice guide!
The link in Step 4 is broken.
hey i am attempting to install VOLTE because my data works just fine, but i cant make any calls from my phone. I get the error `mobile network is not available` but my data not connected to wifi works. Any ideas. I followed your instructions to a T. i am also on verizon RP2 on Havoc OS if that helps
Thank you Ahead of time!