My phone is Lenovo A6000 Plus. It got encrypted by mistake and now after a lots of efforts its got bricked. No OS. TWRP is running only after getting command though fastboot boot recovery.img. Everything is wiped default TWRP splash screens.
When I try to wipe it or try to flash any zip or img it shows errors like "unable to mount /data / system /cache". I think its internal storage got encrypted.
I tried everything. Changed a lot of TWRP but not working. Not able to flash any custom ROM. Not able to wipe anything due to this error. Internal storage shows 0 mb. Not showing in MTP device.
Is there any way to completely wipe internal storage or make it visible in PC so I could format it? I tried every flashing tool for lenovo like QFIL lenovo downloader but not working at all.
Please help.
Try this maybe
https://forum.xda-developers.com/lenovo-a6000/help/lenovo-a6000-plus-revert-to-kitkat-t3201282
---------- Post added at 12:18 PM ---------- Previous post was at 12:13 PM ----------
Try flashing CWM Recovery and if it wont boot try flashing kitkat firmware zip from xda thread and then try booting.After that you can only flash kitkat roms
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Also try going to advance format selecting one by one partition and going to repair.Or go to settings and thick use rm -r to wipe partitions.Good luck
Related
I just installed MIUI 1.9.2 on my nook color with CWR. When I try to boot into MIUI it gets stuck on the boot loop that has the globe logo spinning in space. The little animation just keeps playing over and over and it wont boot into MIUI.
When using CWR to install MIUI I formatted /system, /data, and /boot. I also performed the wipe data/factory reset, dalvik cache, fix permissions, and wipe cache partition commands. I used a 2gb microsd card with the 1gb version of CWR 3.0.2.8 on it and the MIUI zip file on the card. It gets stuck in the boot loop for MIUI 1.8.5 as well. If I follow these exact installation instructions with Honeycomb Preview v4 or CM7 the flash works fine.
Any ideas on how to resolve this issue?
Regards,
urhos
Why did you wipe Boot Partition.Now you have to install full version of Miui not the update version.Check Miui website for instructions.Or you can iinstall CM7 with bootable sd card and then install update version 1.9.2 thru Rom Menager and wipe Devlik catch and data+catche as offered in RM and it should be ok.
You should NEVER wipe /boot. You only wipe /system, /data, & /cache for anything.....
Oh I see. I formatted /boot because this guide said so for Honeycomb flash install on the android central forums.
Is there something different that I need to do now that i formatted /boot?
---------- Post added at 08:03 PM ---------- Previous post was at 07:38 PM ----------
Alright. Thanks for the responses so far. I flashed Cm7 onto the nook and it works. When I try to do anything with rom manager it tells me to install CWR. When I choose to install I get this message: Error while downloading from server. Please make sure that you have a stable internet connection, and that your SD card is inserted and has free space. I Am connected to the net here and my sd card has almost 5GB of space.
---------- Post added at 08:19 PM ---------- Previous post was at 08:03 PM ----------
Okay. Another update. I got MIUI 1.9.2 to install and boot. However, I am now getting the message that says "the process android.process.acore has stopped unexpectedly. Please try again" Is there a way to fix this?
Try renstallig Miui after formating data,system and cache.It has happened to me few times.
Hi,
i tried to update my Note to Jellybean via Wifi and now i am having a bootloop. I can not shut it down, it just restarts into bootloop.
I can access the the download mode and the recovery mode, but clear cache did not chance anything.
I need my date from S Note, is there a way to escape the bootloop? Or is there a way to save this data before doing a factory reset?
Thanks in advance!
Well you can boot into download mode, install CWM and then boot into CWM, back up data do a factory reset or format if required and once everything is working do a partial restore from CWM
---------- Post added at 05:04 PM ---------- Previous post was at 05:04 PM ----------
I think Titanium can restore from CWM backup but not sure
Hi,
If I want to update my apps, my tablet gives the notification "not enough storage capacity". However, I have 8GB available... How can I solve this?
Tnx
Programs or apps not only are stored in user data, but as optimized runtimes in system dalvik cache, which is a limited storage area. Delete some apps or wipe dalvik and let it rebuild.
Sent from my Le Pan TC1020 using Tapatalk
I've wipped the Delavik catch, but the problem is not solved yet... There are not that many apps running on it.
Your data partition could be corrupt.
If it were me, I'd see if you can back them up with titanium backup and flash stock firmware again with fastboot.
Wiping in custom recovery, assuming you have one, system, cache, dalvik and data first. Then go into bootloader and flash stock with fastboot.
You can wipe with fastboot too... Just don't wipe userdata.
---------- Post added at 07:07 PM ---------- Previous post was at 07:06 PM ----------
Here is a guide to do that.
http://forum.xda-developers.com/showthread.php?t=1907796
---------- Post added at 07:08 PM ---------- Previous post was at 07:07 PM ----------
Yes, you'll have to root again and flash custom recovery after.
I keep having to do the pattern at each startup of twrp and the phone even if I disable it it's still there, there is only a decrypt method for 6.0 I can find online, what do i do?
Syystole said:
I keep having to do the pattern at each startup of twrp and the phone even if I disable it it's still there, there is only a decrypt method for 6.0 I can find online, what do i do?
Click to expand...
Click to collapse
The newest twrp does it automatically. Are you flashing the most current version?
---------- Post added at 06:53 AM ---------- Previous post was at 06:50 AM ----------
http://forum.xda-developers.com/showthread.php?p=63523515
Gizmoe said:
The newest twrp does it automatically. Are you flashing the most current version?
---------- Post added at 06:53 AM ---------- Previous post was at 06:50 AM ----------
http://forum.xda-developers.com/showthread.php?p=63523515
Click to expand...
Click to collapse
it asks me to decrypt it every time by entering the pattern, I want to know if i can disable this,
Twrp 2.8.7.2
Syystole said:
it asks me to decrypt it every time by entering the pattern, I want to know if i can disable this,
Twrp 2.8.7.2
Click to expand...
Click to collapse
You will have to flash your partitions over again. Something got corrupted. I don't know exactly how it happens, but I know how to fix it. On mine it will ask for a pattern i never set up.
Download stock factory image and pull out just the system, vendor, recovery, boot and cache images. Then flash each one in this order:
Recovery
Cache
Boot
System
Vendor
This will leave your data partition intact. Just flash twrp and you should see all your files.
If this fails you will have to go complete scratch and just use the flash-all command in factory image. This will wipe it all. Then you can flash twrp and start over. It's best to leave your vendor partition alone when doing backups and restores when using custom roms. Stick to boot, system and data. I don't get the weird decrypt prompt when I only mess with these partitions.
Hello!
I see that some folks want to revert back to stock b350c432 firmware but having trouble doing that. I have the L21 model and have made a twrp backup of a clen install with nothing done to it. It has twrp as recovery.
Partitions that is included; boot, data, system, recovery (twrp), e-recovery (stock), firmware. I hope that is all that is needed to successfully boot that firmware.
I have taken backup of stock recovery as well.
http://mega.nz/#F!CuBGUbhD!2wuXkLI0iNw4VDDqJ5cnzw
You have to unpack the rar and move the folder to your twrp folder location.
Hello where is this backup please. Thanks
---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------
Link please?