Related
This is a list of ODIN flashable stock ROMs. Uploading them to AFH and posting them here for faster download.
If you want your device on here, please give me the model number (SM-Txxx) and CSC you need. Thread will be updated when I have time.
ODIN - Used for flashing ODIN tar.md5 files to your device.
Odin3_v3.10.7.zip
Stock ROMs - These are UNmodified tar.md5 ROMs from Samsung.
SM-T710
5.0.2_T710XXU1AOG5_T710XAR1AOG6_XAR.zip
5.1.1_T710XXU1BOH7_T710XAR1BOH7_XAR.zip
SM-T810
5.0.2_T810XXU1AOG6_T810XAR1AOG6_XAR.zip
5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
SM-T815
T815XXU1AOGB_T815VFG1AOG3_VOD.zip
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Kickoff said:
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I will download what's out and start posting them :good:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Fis2 said:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Click to expand...
Click to collapse
Correct. Make sure you DO NOT check re-partition.
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I'll download it later today and update when it's done :good: thanks
Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
I understand that these are stock roms, curious if non-stock roms like CM12 and similar will ever make their way over? My OR rom is awesome, I'm just one of those fools that's constantly customizing for the fun of it.
keyapira said:
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
Click to expand...
Click to collapse
Google is your friend...
http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Flash at your own risk.
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
mrch0x said:
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
No. You can reinstall stock ROM and have the tablet working as before, but after installing anything custom the efuse will be blown. This means that it can always be detected that custom firmware/kernels/recovery/root/etc have at one point been installed. It also means security containers like Knox will refuse to operate.
I tried out the October (J) release for T815 which has been released for DBT (Germany) and a few other places. (link here). PDA version: T815XXU2AOJ4. Included CSCs: BTU (UK), DBT (Germany), ITV (Italy), XEF (France), XEO (Poland). Android 5.0.2. Previously I had the latest release for PHN (Netherlands), which is still T815XXU1AOG9.
Stagefright bug fixed according to Lookout. Not fixed according to Trustable.
New app icons
Still no multi-user
For DBT, there are four German bloatware apps included. All four can be uninstalled without root.
No Camera2 API
Dialer doesn't accept the secret codes like *#06#, *#0*#, *#1234#
Weird display behaviour (flashing, freezing) at very low battery percentages
Warning: you can not fully downgrade from this version "2" firmware to the version "1" firmwares we had until now! You can partially downgrade if you leave the bootloader and the modem as is (so downgrade only PDA and CSC).
This is great. Any chance that someone has the Stock ROM for the SM-T817V? Or does the firmware for the T815 work on this device?
The October T815XXU2AOJ4 version is now also out for T815 in the Netherlands (PHN), which is bloatfree. No other CSCs included. Link here. The dialer accepts the secret codes like "*#1234#" again. Otherwise the experience is the same. Again, you can't downgrade from this version.
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
I had and un-rooted device, which just received an update (11/03) to version LMY47X.T710XXU2BOJ1. I ended up rooting and flashing TWRP on it, but I'm having an issue writing to my external SD card. Is there something I can flash to fix this?
Thanks
edit: Google was my friend - manually updated platform.xml.
dnydny said:
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
Click to expand...
Click to collapse
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Is it possible to flash a T710 firmware onto a T715 device? I don't need LTE at all so I don't mind losing it (I have no SIM). I just want to get faster updates because I need multi-user support from 5.1.1.
GidiK said:
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Click to expand...
Click to collapse
Thanks! Thats really handy to know. I'll give XAC-T810XXU2BOJ1 a shot and see how that goes.
I have seen many users still have no proper information about upgrading SM-N920C/CD (Galaxy Note 5 and Dual Sim) so i thought i'd write up a simple guide for it.
at the time of writing, Marshmallow Firmwares is only available for CAM and MID CSC Variants, so if you don't mind flashing your lollipop with these firmwares (don't worry you can change it later when your real CSC firmware is released), follow these steps or just walk away
Disclaimer:
#include
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Steps:
1. Get Odin and Extract Odin ZIP file
2. Get Marshmallow Rom [ CAM ] [ MID ]
3. Enable Developers Option and turn on OEM Unlock from the Developer Options.
4. Reboot to Download Mode by first turning off the phone and then holding volume down + home + power key combo
5. Start Odin and Connect your phone and wait until you get a blue sign in Odin, then Select the Firmware by clicking the AP button and wait for few minutes to let it load the 4gb file after its finished loading, Make sure re-partition is NOT ticked, Click start and wait for your device to reboot.
Known Issues:
1 if you flash CAM csc firmware, you'll have S health restrictions, on older version there was a bypass by using xposed module but nothing yet for 6.0.1
Thnx
Can I flash this on my N 9208 duos?thanks in advance
pafimal said:
Can I flash this on my N 9208 duos?thanks in advance
Click to expand...
Click to collapse
no, it uses a different bootloader than the 920C
#Ather.. one question .. why turning on Oem unlock ?? I read somewhere on forum that it is only when rooting device .. correct me if i'm wrong .
I flashed mine without turning on OEM unlock.
I came from XSG 5.1.1 UAE flashed with MID firmware . Everything went well and no problems with the device, battery, speed...etc
Sent from my SM-N920C using Tapatalk
pafimal said:
Can I flash this on my N 9208 duos?thanks in advance
Click to expand...
Click to collapse
Sent from my SM-N920P using XDA Premium HD app
en3s said:
#Ather.. one question .. why turning on Oem unlock ?? I read somewhere on forum that it is only when rooting device .. correct me if i'm wrong .
I flashed mine without turning on OEM unlock.
I came from XSG 5.1.1 UAE flashed with MID firmware . Everything went well and no problems with the device, battery, speed...etc
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
i know its not required for odin flashes, but its better to be safe than sorry...
Will you lose data?
GraphicMarble said:
Will you lose data?
Click to expand...
Click to collapse
the firmwares linked in the OP are 1 part file, so no you won't be loosing any data on your internal storage (Pictures, music etc) BUT its safe to take a backup!
Hi,
is it possible to downgrade back to 5.1.1? I installed marshmallow from another thread, but in case i`d want to sell the phone, german language would be required, which isn`t there now after the update.
tysoncrypto said:
Hi,
is it possible to downgrade back to 5.1.1? I installed marshmallow from another thread, but in case i`d want to sell the phone, german language would be required, which isn`t there now after the update.
Click to expand...
Click to collapse
which rom did you flash? MID firmware has all the languages
Can anyone upload in mega server?
Enviado desde mi sm-n920C
Ather said:
which rom did you flash? MID firmware has all the languages
Click to expand...
Click to collapse
It was the cambodian rom i think from this thread: http://forum.xda-developers.com/note5/general/guide-update-note-5-sm-n920c-to-android-t3317984
What does MID mean? Could you send me the link for the firmware? I`ve also lost some features in the S-Health app after the update - Stress and SpO2 measuring is gone...Thanks for the answer by the way
tysoncrypto said:
It was the cambodian rom i think from this thread: http://forum.xda-developers.com/note5/general/guide-update-note-5-sm-n920c-to-android-t3317984
What does MID mean? Could you send me the link for the firmware? I`ve also lost some features in the S-Health app after the update - Stress and SpO2 measuring is gone...Thanks for the answer by the way
Click to expand...
Click to collapse
CAM = Cambodian Formware
MID = Middle eastern firmware (multi CSC, incls PAK, KSA, XSG etc)
what you need to do is get the latest XSG firmware from here : https://mega.nz/#!IREXRaLb!e_Jj4c3WLSLjnw9YZBFXxsyaoAuFGXTXA4r6vI-cUSQ
regarding your s health features, Samsung does not have propper medical license to allow spo2 and other tests done so thats why its limited to only HRM in the CAM firmware, flash any other ROM like MID or XSG and it'll work fine
PS. make sure you backup your data first!
I will use the Note N920C in UK, what Firmware should I use? XSG? XFE?
I received this update today via OTA.
DNK01 said:
I received this update today via OTA.
Click to expand...
Click to collapse
Did you get your OTA in UK?
Fab49ers said:
Did you get your OTA in UK?
Click to expand...
Click to collapse
No i got it in Turkey mate.
Does the other version have S Health restrictions ?
sephiroth_vg said:
Does the other version have S Health restrictions ?
Click to expand...
Click to collapse
I've only seen Cambodians, Rest of the gcc are same as XSG since its a multi csc rom, it just displays different names and configures carrier apns per country
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help
gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link
[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped
gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...
p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.
p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??
gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......
Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!
I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?
Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0
Hi all
I am a guy from Spain and I am using Google translator, I hope all understand all me well.
I have an S8+ updated to Android Pie and after testing it several days I did not like it.
I tried to install Oreo using Odin but it gives me an error.
Searching for information, I found I can not do downgrade because of a binary boot number.
is there another method to install stock Oreo rom? Could it by root?
I never performed root, i'm noob.
I would appreciate any help. Thanks and best regards
VanderMirch said:
Hi all
I am a guy from Spain and I am using Google translator, I hope all understand all me well.
I have an S8+ updated to Android Pie and after testing it several days I did not like it.
I tried to install Oreo using Odin but it gives me an error.
Searching for information, I found I can not do downgrade because of a binary boot number.
is there another method to install stock Oreo rom? Could it by root?
I never performed root, i'm noob.
I would appreciate any help. Thanks and best regards
Click to expand...
Click to collapse
Do you have the newest Odin version?
Have you ever tried it on another computer?
Have you ever tried it with a 4tlg.Firmware? (Download with SamFirm)
bininga59 said:
Do you have the newest Odin version?
Have you ever tried it on another computer?
Have you ever tried it with a 4tlg.Firmware? (Download with SamFirm)
Click to expand...
Click to collapse
Hi.
Yes, the latest version of Odin: Odin3-v3.13.1
Yes, 1 pc with Windows 7 and another with Windows 10.
I've never tried a 4tlg.Firmware, I do not even know what it is.
As I commented in the messenge I read that odin can not be downgrade because it changes a binary number of the boot between Pie and Oreo ¿not? (or something like that happens).
Thank you very much for the reply.
VanderMirch said:
Hi.
Yes, the latest version of Odin: Odin3-v3.13.1
Yes, 1 pc with Windows 7 and another with Windows 10.
I've never tried a 4tlg.Firmware, I do not even know what it is.
As I commented in the messenge I read that odin can not be downgrade because it changes a binary number of the boot between Pie and Oreo ¿not? (or something like that happens).
Thank you very much for the reply.
Click to expand...
Click to collapse
Example picture for the download of a 4tlg.Firmware
bininga59 said:
Example picture for the download of a 4tlg.Firmware
Click to expand...
Click to collapse
Downloading the firmware, when are you downloaded what should I do? Is that firm Pie not?
Previously I tried to install by Odin the latest Oreo firmware para mi S8+ downloaded from Sammobile and alwais error.
Thanks.
VanderMirch said:
Downloading the firmware, when are you downloaded what should I do? Is that firm Pie not?
Previously I tried to install by Odin the latest Oreo firmware para mi S8+ downloaded from Sammobile and alwais error.
Thanks.
Click to expand...
Click to collapse
You look at Sammobile which version it is
9 = pie
8 = Oreo
bininga59 said:
You look at Sammobile which version it is
9 = pie
8 = Oreo
Click to expand...
Click to collapse
9 = pie
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/PHE/download/G955FXXS4DSC2/262051/
VanderMirch said:
9 = pie
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/PHE/download/G955FXXS4DSC2/262051/
Click to expand...
Click to collapse
Yes, G955FXXS4DSC2 = Pie
bininga59 said:
Yes, G955FXXS4DSC2 = Pie
Click to expand...
Click to collapse
Is it valid to downgrade Oreo?
VanderMirch said:
Is it valid to downgrade Oreo?
Click to expand...
Click to collapse
Who has something against it?
bininga59 said:
Who has something against it?
Click to expand...
Click to collapse
I do not understand you, sorry
VanderMirch said:
I do not understand you, sorry
Click to expand...
Click to collapse
You asked, Is it valid to downgrade Oreo?
I do not mind
Can someone help me please?
VanderMirch said:
Can someone help me please?
Click to expand...
Click to collapse
In the firmware name you download the binary number ( bootloader version ) is the fifth (5) number from the right. In your case 4 is your binary number.
Eg: G955FXXS4CRLB - 4 is the binary(bootloader) number. You can only flash version 4 or higher not 3 or lower.
Download firmware from.sammobil or.updato
Eg: G955FXXS4CSB1 ( PHE ) is Oreo Feb release.
Don't know if your on carrier firmware or not?
Unzip downloaded firmware using 7zip,WinRAR or any zip program that supports lz4 compression ratio. There will be 5 files.
Note: It is recommended to a clean install when downgrading so do a backup first.
1. In Odin from the extracted files place:
BL in BL section
CP in CP section
AP in AP section
CSC in CSC section - use the CSC file not the Home CSC file. This will do a clean install same as a factory reset.Wait for Odin to load files
2. Put phone in download mode and connect to PC
3. When Odin see's the phone then hit the start button.
4. When finished phone should reboot then run through the setup and restore your backups.
spawnlives said:
In the firmware name you download the binary number ( bootloader version ) is the fifth (5) number from the right. In your case 4 is your binary number.
Eg: G955FXXS4CRLB - 4 is the binary(bootloader) number. You can only flash version 4 or higher not 3 or lower.
Download firmware from.sammobil or.updato
Eg: G955FXXS4CSB1 ( PHE ) is Oreo Feb release.
Don't know if your on carrier firmware or not?
Unzip downloaded firmware using 7zip,WinRAR or any zip program that supports lz4 compression ratio. There will be 5 files.
Note: It is recommended to a clean install when downgrading so do a backup first.
1. In Odin from the extracted files place:
BL in BL section
CP in CP section
AP in AP section
CSC in CSC section - use the CSC file not the Home CSC file. This will do a clean install same as a factory reset.Wait for Odin to load files
2. Put phone in download mode and connect to PC
3. When Odin see's the phone then hit the start button.
4. When finished phone should reboot then run through the setup and restore your backups.
Click to expand...
Click to collapse
It has worked! Yeah! It was as you explained.
The problem I had was that I was getting a firmware with the binary number 3 because it was the last one in SamMobile for the normal S8 + (SM-G955F), to download the one you put me in, I searched for the S8 + dual sim (SM- G955FD).
Updato has very slow downloads, three days to download the firmware.
¡I thank you very much for the help! Without you I would not have achieved it.
:good::good: :highfive:
please tell..
VanderMirch said:
It has worked! Yeah! It was as you explained.
The problem I had was that I was getting a firmware with the binary number 3 because it was the last one in SamMobile for the normal S8 + (SM-G955F), to download the one you put me in, I searched for the S8 + dual sim (SM- G955FD).
Updato has very slow downloads, three days to download the firmware.
¡I thank you very much for the help! Without you I would not have achieved it.
:good::good: :highfive:
Click to expand...
Click to collapse
Hello bro , I read your all posts, I also want to roll back I also know every steps, but now I want to hear from you " If all the apps working Ok ?? Like samsung pay and samsung health etc. ?? KNOX is 0*0 or 0*1 ??
jayeshbsoni said:
Hello bro , I read your all posts, I also want to roll back I also know every steps, but now I want to hear from you " If all the apps working Ok ?? Like samsung pay and samsung health etc. ?? KNOX is 0*0 or 0*1 ??
Click to expand...
Click to collapse
Hi bro.
Yes, all apps work correctly: Samsung Pay and samsung health perfectly and all the others.
My case is with Spain PHE firmware.
The Knox is 0 * 0, using official stock firmwares the Knox never rises.
After returning to Oreo, remember to freeze the software update process so that it does not search or update again to Pie. You have to do it by adb
If you continue with doubts, you ask me
And the files downloaded from Updato and Sanmobile are stock? I have S8 and want to downgrade from Pie to Oreo, I have G950FXXS5DSF1 bootloader 5, the oreo files are with bootloader 4 (not 100%), can I do this downgrade? or it will get bricked? knox tripped?
rilley said:
And the files downloaded from Updato and Sanmobile are stock? I have S8 and want to downgrade from Pie to Oreo, I have G950FXXS5DSF1 bootloader 5, the oreo files are with bootloader 4 (not 100%), can I do this downgrade? or it will get bricked? knox tripped?
Click to expand...
Click to collapse
Hello.
I'm afraid you can not download the version because it's a 5 and Oreo only has up to 4.
Maybe I can install a version of Pie 4 and then download it to Oreo 4, but I'm not sure about it.
Hi, did you make it? Did it help?
I have tried one I found but it gave me an error message.
Search on google for sammobile g950F
And download the ROM based on your carrier country etc.
Flash with Odin
Kenora_I said:
Search on google for sammobile g950F
And download the ROM based on your carrier country etc.
Flash with Odin
Click to expand...
Click to collapse
Sorry for the late reply. But I got a little busy. I was wondering how to download from sammobile. Everytime I want to download something it asks me to click a premium plan. So I click free non-premium one and it still sends me to the order page.
Haku40000 said:
Sorry for the late reply. But I got a little busy. I was wondering how to download from sammobile. Everytime I want to download something it asks me to click a premium plan. So I click free non-premium one and it still sends me to the order page.
Click to expand...
Click to collapse
Use this PC app to download latest firmware for your device.
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
spawnlives said:
Use this PC app to download latest firmware for your device.
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Click to expand...
Click to collapse
I downloaded the zip file with frija. Can I just flash the zip file like I do with other ROM or do I need to do things different?
Haku40000 said:
I downloaded the zip file with frija. Can I just flash the zip file like I do with other ROM or do I need to do things different?
Click to expand...
Click to collapse
You need to flash the filmware with Odin. The link below tells you how to do this and also contains a link to download Odin.
How to update your Samsung Galaxy smartphone and install official firmware
Follow these instructions to manually install Android updates through recovery, and full firmware using Odin on Samsung Galaxy smartphones.
www.xda-developers.com