Database Users

[Q] N9005 "No Service" need help to troubleshoot

Hey All,
I got a Note 3 N9005, which supposedly was purchased in UAE.
Currently trying to use it in India, but, the device always says "No Service", with a crossed circle instead of network signal icon on notification bar.
Phone is on 4.2.2 with UGNH1. Below are some observations:
- Phone does NOT ask for any PIN / Unlock Code.
- In Settings > Status.. irrespective of any SIM, or no SIM.. Mobile Network Type = Unknown, Service State= Out of service, Mobile Network State=Disconnected.
- Orig CSC code is displayed as XTC from Phone Info App
- Tried to select a different CSC from CSC Select app.. it changed the boot logo but, network status.. still crossed circle
- IMEI is proper as printed below the battery
- Still i tried ChainFire's RegionLockAway. But, as expected, the method is only for MI7 / MJ1 / MJ3 JB versions. Sadly mine has already crossed and has A2 bootloader. So, no change was observed with CF RegionLockAway. Reverted the cahnges.
- Tried to flash MJ1 / MJ3 binaries from sammobile. As expected the latest bootloader won't allow to downgrade.
- Flashed Omega, but for no luck. Still no service and crossed circle icon.
- Flashed latest CyanogenMod. Though there was no Crossed Circle icon, there was an icon of network signal with zero network.
- Flashed official Lollipop verson to see if any changes.. no luck. Reverted back.
- Installed advanced network info app, network status, neighboring MSC, cells.. etc was shown as none.
No clue how to enable the device's network capabilities (all else like WiFi and other feature work as usual).
It will be a great help if you can guide me through! Please let me know if any other info is required.
Thanks a lot in advance. !!

Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
What I would do is...
Download the firmware from Sammobile to suit your phone. One fairly common issue is that Hong Kong or Chinese phones get sold into Europe or other markets and their PIT and other partitions are different. So first thing is to go back to scratch.
If you phone IS from where you think, make sure you have the stock firmware for that location and flash the latest version using Odin and Download mode.
Start Odin - v3.09 is best.
To enter DL mode for anything to do with BL or Modem you MUST turn phone off. It is best to remove the battery and wait a while, then put it in and use the Power On+Vol-Down+Home key to get into DL mode, then [plug phone into PC and wait for Odin to notice it is there.
(if Odin doesn't notice it, get the latest Samsung USB drivers for the phone and install them with phone unplugged, then plug in phone and Windows should give a pop-up)
Click on AP in Odin and navigate to where you saved the firmware - note you DL'd a zip but you need the md5 file so use 7zip to unpack the zip.
Click on the md5 file and wait for it to load into Odin.
* [Auto Reboot] and [F.Reset Time] should be the ONLY things ticked.
Click [Start] and wait.
Let phone restart and set it up with your details. Once done see if you have network.

Journyman16 said:
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
......
Let phone restart and set it up with your details. Once done see if you have network.
Click to expand...
Click to collapse
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.

maesiva said:
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
Click to expand...
Click to collapse
Update:
Flashed below 3 stock firmwares from sammobile, each time cleared cache and factory wipe.. still the crossed circle is hopelessly adamant and persistent.
4.4.2 N9005XXUGNH1
4.4.2 N9005XXUGNI4
4.3 N9005XXUDMJ7 (failed to flash, i guess due to current bootloader version A3)
I tried with Odin 3.09.3 & 3.10.6 & 3.07 .... same result.
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!

Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .

maesiva said:
Update:
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Click to expand...
Click to collapse
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.

JJEgan said:
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
Click to expand...
Click to collapse
Hi JJEgan, thanks for your suggestions..
I tried with different SIM, yet no luck.
APN settings.. shows my SIM operator's default settings.
When I search networks Manually.. it searches for a ~10 seconds and returns without any list/error.
Select automatically shows "Automatic registration.." progress continuously for > 5 mins.. i closed manually.
Attached screenshot of Baseband, Modem, CSC versions.
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Baseband: UGNH1
Kernel: 3.4.0-1955971

Journyman16 said:
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
Click to expand...
Click to collapse
Yea Journyman16, they seem to be still good old of 4.4.2. Latest must be 5.0. On samobile, for XTC i could see only till 4.4.2. Maybe for this phone version, there are no updates? Not sure.
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!

/system/csc/GLB/system/csc/customer.xml has a line:
<NbNetworkLock>1</NbNetworkLock>
Which ChainFire's RegionLockAway changes to
<NbNetworkLock>0</NbNetworkLock>.. but as mentioned in it's details, the method is compatible only with MI7, MJ1, MJ3 firmwares and i'm on UGNH1 and unable to downgrade
Chainfire said:
Sammy, in their never-ending quest to make sure they've pissed off every single one of their customers at least once, have decided to region lock their latest model devices.
...
Compatible devices
- Galaxy Note 3 SM-N9005 (MI7, MJ1, MJ3 firmwares)
...
Click to expand...
Click to collapse
Any method to downgrade the BL to A1 would help !?

Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log

maesiva said:
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
Click to expand...
Click to collapse
I'd upgrade rather than try to get around the downgrade issues. What Region do you WANT to have? European ones seem to get early release of upgrades - e.g. many LP ROMs are based around the Polish release.
I don't know enough to interpret logs, but my thought would be to find a non-Philippines version (one of the Europe ones perhaps) and find a PIT file for that one. Then go read up on how to safely flash a new PIT. Then flash your preferred firmware and follow the root process etc.
I started with a HK version of S3 - every time I tried to flash a new ROM it failed and bricked my phone. Eventually I found that the PIT file on most Asian phones was different and I flashed PIT, then stock FW for the region I wanted then re-rooted and flashed the custom ROM.
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...

Journyman16 said:
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Click to expand...
Click to collapse
good one

maesiva said:
good one
Click to expand...
Click to collapse
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
Now you probably want an India ROM but I haven't any links for that 0 there's a thread for India users though I think.
What I think might be happening is that different countries use different frequencies and formats for signal. It might be that India's set up simply doesn't work with the modem you've been using and the India ROM will not set up with the Asian PIT set up etc.
But read up on the process first, OK? The more you know about it the better chance you have to recover from anything going wrong.
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?

Journyman16 said:
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
....
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Click to expand...
Click to collapse
Hi Journyman16, thanks for the suggestions.. i tried the pit file you referred, but, still no luck. And, if i'm not wrong pit file is all about allocating ROM space for /system & /dbdata and has nothing to deal with the antenna/telephony module, please correct if i'm not right.
About the phone's status yea you're right. It never worked after i received it. But, it was working usually in UAE, as per the info i got. Maybe.. as you suspected.. it might be faulty hardware too.. I don't know.. just exploring the options.. to conclude something..

maesiva said:
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
Click to expand...
Click to collapse
The only unbranded NH1's seem to be Greece or Netherlands. Netherlands has a 5.0 - maybe DL that and flash in Odin? Greece has a v5.0 but it's branded with (EUR) so I don't know if that's a company or general... I'd go the Netherlands one.
Other than that, I'm not sure - might be time to get the phone checked properly?

Finally.. could trace the root cause.. antenna / receiver chip malfunction. So, it was an hardware issue that had to be replaced at a cost at service center.
Summary: If network icon is crossed circle, its not a good sign !! Thanks
Journyman16 said:
Journyman16
Click to expand...
Click to collapse
,
JJEgan said:
JJEgan
Click to expand...
Click to collapse
!!

I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.

Naedean said:
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Click to expand...
Click to collapse
Please search and read before posting.Multiple identical questions posted day after day .
Usual is wrong IMEI .
Sent from my SM-N930F using XDA-Developers Legacy app

[HOW-TO] How to GET Lollipop 5.1.1 to your G920F

Here you can find the tar file 5.1.1
BE AWARE You can't root it or install twrp due to new bootloader​
Hello to EVERYONE!!!
Here a guide on how to receive 5.1.1 (G920F ONLY)​
1.Download this firmware
2.Install it via odin
3.Reboot to recovery
4.Wipe data twice
5.Wipe cache
6.Reboot
7.Check for updates
8.VOILA
Don't forget to press the Thanks button​

Can you give more informations on which firmware it is ... what dose it really do ... and if I have a phone with one csc code will it change ...
Sent from my SM-G920F using XDA Free mobile app

Update on how to get the right CSC (XEF) for the 5.1.1. update to show up
Here is how to change the CSC code to XEF (absolutely needed in order to get the 5.1.1. update)
- install & root with your preferred way ( [ROOT] PingPongRoot ***S6 & S6 Edge Root Tool*** or CF-Auto-Root
- install Phone INFO ★Samsung★ (paid version). Now in order to make the "Change CSC" option you will need to update the Superuser to "Superuser v2.49"
Here is how to update the SuperSU:
- Download the zip file at http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
- Extract and get the Superuser.apk file from the 'common' folder inside it.
- Install Superuser.apk, it will ask to update the binaries to the latest version. Let it update.
- Reboot the phone.
One of the users noted (related to using the tool Phone INFO ★Samsung★ (paid version) to change the CSC code) that: "I finally changed the CSC with this steps: rooted with Ping Pong, installed Phone Info (thank you for this app), and SuperSu 2.94, changed CSC, error on Recovery, Wipe data factory reset in Recovery, flashed the phone with Odin. Tested with 2 G925F phones."
I can confirm I followed the same procedure and it worked!
View attachment 3373797

dehnhaide said:
Here is how to change the CSC code to XEF (absolutely needed in order to get the 5.1.1. update)
- install & root with your preferred way ( [ROOT] PingPongRoot ***S6 & S6 Edge Root Tool*** or CF-Auto-Root
- install Phone INFO ★Samsung★ (paid version). Now in order to make the "Change CSC" option you will need to update the Superuser to "Superuser v2.49"
Here is how to update the SuperSU:
- Download the zip file at http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
- Extract and get the Superuser.apk file from the 'common' folder inside it.
- Install Superuser.apk, it will ask to update the binaries to the latest version. Let it update.
- Reboot the phone.
One of the users noted (related to using the tool Phone INFO ★Samsung★ (paid version) to change the CSC code) that: "I finally changed the CSC with this steps: rooted with Ping Pong, installed Phone Info (thank you for this app), and SuperSu 2.94, changed CSC, error on Recovery, Wipe data factory reset in Recovery, flashed the phone with Odin. Tested with 2 G925F phones."
I can confirm I followed the same procedure and it worked!
View attachment 3373797
Click to expand...
Click to collapse
This method that I have written does not need root

Screenshots

Deleted.

zdravkodubravec said:
Can you give more informations on which firmware it is ... what dose it really do ... and if I have a phone with one csc code will it change ...
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
You only goal to get 5.1.1 is to change csc
Here is a guide that you can do that without loosing waranty

t-shock said:
Hello to EVERYONE!!!
Here a guide on how to receive 5.1.1 (G920F ONLY)​
1.Download this firmware
2.Install it via odin
3.Reboot to recovery
4.Wipe data twice
5.Wipe cache
6.Reboot
7.Check for updates
8.VOILA
Don't forget to press the Thanks button​
Click to expand...
Click to collapse
Hi man. If I am on Build Number: G920FXXU1AOCV, my start screen with Telekom ( I have waranty) will disapear after flashing your rom? I must do the "Emergency software recovery and initialization" with Smart Switch before flashing this with Odin to not get the bootloop problem? What is the problem with CSC and waranty?
Thanx!

A bit of attention.
t-shock said:
This method that I have written does not need root
Click to expand...
Click to collapse
Read my post twice. In order to be able to get the 5.1.1. (at least for now) you need the XEF CSC (France). If others can confirm that they can get 5.1.1. without the XEF CSC that indeed an update / downgrade to your suggested firmware (an other as well) will work just fine. Until then CSC change is needed in such procedure requires root (unfortunately)

*#272*IMEI# to change CSC

t-shock said:
You only goal to get 5.1.1 is to change csc
Here is a guide that you can do that without loosing waranty
Click to expand...
Click to collapse
Rooting with Ping Pong will not trip Knox, so you will not lose warranty.

I think they should have one version of firmware for all ..or even one s6 and one s6 edge ...not so many variants. ..
Sent from my SM-G920F using XDA Free mobile app

New bootloader blocks downgrading, be careful installing 5.1.1 OTA!
Kernel built after May 15th (including some 5.0.2 and all 5.1.1) have PingPong xploit fixed. Be cautious when installing OTA these days and FlashFire might be your best shot of upgrading systems. i do not recommend to install 5.1.1.

This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.

he_stheone64 said:
This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.
Click to expand...
Click to collapse
OK, but from what I can tell the update is available for all the devices with that firmware via OTA; at the moment they are upgrading to 5.1.1. Why do you consider it can take a week?

llapao said:
OK, but from what I can tell the update is available for all the devices with that firmware via OTA; at the moment they are upgrading to 5.1.1. Why do you consider it can take a week?
Click to expand...
Click to collapse
Since this happens for all OTA`s, they are incremental. So some users get it on day 1, others on day 2, other even later. It`s like that since ages. Manufactureres use this careful way of rolling out upgrades to avoid issues, in case OTA includes a major bug.

he_stheone64 said:
This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.
Click to expand...
Click to collapse
I will agree with you but this method that I wrote worked perfectly for me (at least)

I did but, there is no update (The latest updates have already been installed).

rucci said:
I did but, there is no update (The latest updates have already been installed).
Click to expand...
Click to collapse
So .... i think we all need a bit patient and wait a bit .... it will come ... and even without 5.1.1 I think my s6 is great .....
Sent from my SM-G920F using XDA Free mobile app

zdravkodubravec said:
So .... i think we all need a bit patient and wait a bit .... it will come ... and even without 5.1.1 I think my s6 is great .....
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
maybe the best is to flash via odin a 5.1.1 ROM hihi
Enviado do meu SM-G920F através de Tapatalk

[STOCK COLLECTION] Stock ODIN Flashable ROMs

This is a list of ODIN flashable stock ROMs. Uploading them to AFH and posting them here for faster download.
If you want your device on here, please give me the model number (SM-Txxx) and CSC you need. Thread will be updated when I have time.
ODIN - Used for flashing ODIN tar.md5 files to your device.
Odin3_v3.10.7.zip
Stock ROMs - These are UNmodified tar.md5 ROMs from Samsung.
SM-T710
5.0.2_T710XXU1AOG5_T710XAR1AOG6_XAR.zip
5.1.1_T710XXU1BOH7_T710XAR1BOH7_XAR.zip​
SM-T810
5.0.2_T810XXU1AOG6_T810XAR1AOG6_XAR.zip
5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip​
SM-T815
T815XXU1AOGB_T815VFG1AOG3_VOD.zip​

Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk

Kickoff said:
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I will download what's out and start posting them :good:

When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!

Fis2 said:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Click to expand...
Click to collapse
Correct. Make sure you DO NOT check re-partition.

Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk

DUHAsianSKILLZ said:
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I'll download it later today and update when it's done :good: thanks

Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:

I understand that these are stock roms, curious if non-stock roms like CM12 and similar will ever make their way over? My OR rom is awesome, I'm just one of those fools that's constantly customizing for the fun of it.

keyapira said:
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
Click to expand...
Click to collapse
Google is your friend...
http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Flash at your own risk.

Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk

mrch0x said:
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
No. You can reinstall stock ROM and have the tablet working as before, but after installing anything custom the efuse will be blown. This means that it can always be detected that custom firmware/kernels/recovery/root/etc have at one point been installed. It also means security containers like Knox will refuse to operate.

I tried out the October (J) release for T815 which has been released for DBT (Germany) and a few other places. (link here). PDA version: T815XXU2AOJ4. Included CSCs: BTU (UK), DBT (Germany), ITV (Italy), XEF (France), XEO (Poland). Android 5.0.2. Previously I had the latest release for PHN (Netherlands), which is still T815XXU1AOG9.
Stagefright bug fixed according to Lookout. Not fixed according to Trustable.
New app icons
Still no multi-user
For DBT, there are four German bloatware apps included. All four can be uninstalled without root.
No Camera2 API
Dialer doesn't accept the secret codes like *#06#, *#0*#, *#1234#
Weird display behaviour (flashing, freezing) at very low battery percentages
Warning: you can not fully downgrade from this version "2" firmware to the version "1" firmwares we had until now! You can partially downgrade if you leave the bootloader and the modem as is (so downgrade only PDA and CSC).

This is great. Any chance that someone has the Stock ROM for the SM-T817V? Or does the firmware for the T815 work on this device?

The October T815XXU2AOJ4 version is now also out for T815 in the Netherlands (PHN), which is bloatfree. No other CSCs included. Link here. The dialer accepts the secret codes like "*#1234#" again. Otherwise the experience is the same. Again, you can't downgrade from this version.

Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip

I had and un-rooted device, which just received an update (11/03) to version LMY47X.T710XXU2BOJ1. I ended up rooting and flashing TWRP on it, but I'm having an issue writing to my external SD card. Is there something I can flash to fix this?
Thanks
edit: Google was my friend - manually updated platform.xml.

dnydny said:
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
Click to expand...
Click to collapse
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...

Is it possible to flash a T710 firmware onto a T715 device? I don't need LTE at all so I don't mind losing it (I have no SIM). I just want to get faster updates because I need multi-user support from 5.1.1.

GidiK said:
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Click to expand...
Click to collapse
Thanks! Thats really handy to know. I'll give XAC-T810XXU2BOJ1 a shot and see how that goes.

Can i install 935F stock rom on 935FD Device.

hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6

gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD

[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile

gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot

Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help

gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link

[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped

gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.

gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge

Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...

p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD

I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!

troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks

madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.

p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??

gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.

p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......

Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!

I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?

Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0

[HELP]Stuck in b/w boot screen after flashing BL and CP

I flashed CP and BL in preparation for new rom from this thread: https://forum.xda-developers.com/s7-...-v1-1-t3356699 following the devs instructions.
I have a Samsung S7 Edge (G935F).
I flashed the files in these links:
1. https://www.androidfilehost.com/?fid=529152257862698173
2. https://www.androidfilehost.com/?fid=673368273298926388
Flashing with odin passed. But my phone is now stuck on the Black and White boot logo and I can't turn it off and It seems I can't even access Recovery or Download mode. What to do now?
Update:
Not all hope seems lost. Already thought 600€ down the drain.
Made into Download mode again. What to flash now?
Btw: Is the bootloader OS-version dependent ? I'd think not but I am not so sure anymore.

just download the stock firmware and flash using odin.

edan1979 said:
just download the stock firmware and flash using odin.
Click to expand...
Click to collapse
Well trying to find that. Any pointers? I have hero2lte. sammobile.com only seems to have AP/CSC/SC but not modems or bootloaders.

ru5k said:
Well trying to find that. Any pointers? I have hero2lte. sammobile.com only seems to have AP/CSC/SC but not modems or bootloaders.
Click to expand...
Click to collapse
What Bootloader / Modem do you need? BTU?

rasseru16 said:
What Bootloader / Modem do you need? BTU?
Click to expand...
Click to collapse
Sorry BTU doesn't tell me anything.
Well I have TWRP running so I guess an bootloader that is compatible with that. And as for the modem just about any that is confirmed to work with hero2lte.
And if all is lost I'll even accept a stock firmware (assuming they include bootloader and modem). I am actually about to pay 15€ to sammobile so I can freaggin download their stock firmware w/o having wait for 3 days for the DL to finish.

* * * A L L G O O D / S O L V E D * * *
Flashed stock nougat btu. It's setting up as I write.

ru5k said:
* * * A L L G O O D / S O L V E D * * *
Flashed stock nougat btu. It's setting up as I write.
Click to expand...
Click to collapse
Sorry to say this, but you didn't have to pay 15 euros! you could have used http://fw.updato.com/ (XDA Link: https://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785) instead, it has the same content, but no download speed limit! (for free!)
FYI, Samfirm also works! (link: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 )

Random04 said:
Sorry to say this, but you didn't have to pay 15 euros! you could have used http://fw.updato.com/ (XDA Link: https://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785) instead, it has the same content, but no download speed limit! (for free!)
FYI, Samfirm also works! (link: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 )
Click to expand...
Click to collapse
Well I said I was about to pay those suckers 15€. Luckily I found a different resource which was completely free as it should be. Thanks for providing those links and helping me. Much appreciated! :good: