Hi all,
I'll tell you first what started this whole exercise.
I ran out of room on my Nexus 7!
I discovered it was because I try to be backup crazy.
I ended up mainly having too many Clockwork mod backups. I think the proper term is Nandroid Backup (let me know if that is correct).
Plus, I had too many Podcasts stored. BeyondPod settings needed to be adjusted.
OK, so just deleting the Nandroid backups would be stupid, I wanted to copy them to an SD card I have installed on my Asus TF300T.
I have Samba (filesharing) installed on all my devices so I can copy wirelessly from Android device to basically any device.
But it turned out, those files are just too big and would take forever.
I had purchased a long time ago, the cable for my Samsung Galaxy S II Epic 4G, which allows you to attach a USB device to the micro USB port on the phone. Now I can't find the cable, so I will have to order a new one. And I even forgot what the name of the cable is? Can you refresh me on what I should order?
But I have an Asus TF300T tablet with the keyboard dock.
The keyboard dock has a standard USB port on it.
So I figured that it might be possible using the Nexus 7's included USB cable and plug into the dock's USB port.
If it is possible, what do I need to do? I don't want to cause any damage to either device. What settings or software would I need?
And, yes I know I could copy the files to a PC then recopy them back to the SD memory card.
But I'm trying to do a direct copy which will be faster. Essentially, only copying the data once not twice.
Thanks!
Now if I could only find that stupid cable!
Rob
PS OK, this is the only downside to the Nexus 7, I guess this is a good reason to always have a memory expansion slot.
Sent from my SPH-D710 using Tapatalk 2
If you have a USB On-The-Go cable - you should be able to just plug it into your device and then directly into the keyboard and it should be all set.
For the memory expansion issue - you can plug a flash drive into the USB Female adapter from your OTG cable. Based on the fact that you have nandroid backups I'm guessing you're unlocked/rooter, so just install the app "StickMount" from the play store and you should be all set to access media/files from your external flash drive.
brianjr1 said:
If you have a USB On-The-Go cable - you should be able to just plug it into your device and then directly into the keyboard and it should be all set.
For the memory expansion issue - you can plug a flash drive into the USB Female adapter from your OTG cable. Based on the fact that you have nandroid backups I'm guessing you're unlocked/rooter, so just install the app "StickMount" from the play store and you should be all set to access media/files from your external flash drive.
Click to expand...
Click to collapse
Thanks.
Since I posted the message only 10 minutes ago, I found the adapter.
Funny, the only name of the adapter on the Samsung box is 'USB Adapter'. Real descriptive!
Yes, sorry, left that part out of the original story. I'm rooted and have CWM installed on the Nexus 7.
And I already have Stickmount installed on the Nexus 7, I guess I must have read the name of the app in one of the forums and thought it would come in handy.
What is a 'USB on the Go' cable?
Isn't the cable that came with the Nexus 7 (it is usually plugged into the charger base, but you can use it to plug into your PC as well). I used that cable to attach to the PC so I could root the Nexus. Is there a difference, mind you the USB port on the dock is the same kind of USB port on your PC?
Thanks again!
Rob
Sent from my SPH-D710 using Tapatalk 2
So I bought one of those cheap (sub $1) OTG adapters from Amazon, and up until today it worked. I was able to import photos from my digital camera and use a USB mouse. Today I can't get it to work at all. Not the mouse, not the camera, not anything else.
Regular USB (charging and PTP mode, I would have tested MTP as well, but it's not compatable with my laptop) works fine. I'm able to transfer files to and from the tablet, and it charges fine.
Is something wrong with the OTG cable or my tablet? Will I have to buy a new OTG cable to test?
If its only <$1 just get another one or two! Sounds like a cable problem if everything else is working
Christmas is coming, I see the shadows of Ebeneezer Scrooge !!
Are you using stick mount to load the OTG onto the N10? If so thats probably why. When i first installed my stickmount it worked but wouldn't see any of the files on the USB drive. Now after i've unlocked and rooted the device it won't even show the usb drive attached. I switched to Nexus media importer and it works fine, but i believe stickmount is having issues with 4.2.
However if the OTG cables did cost you less than a buck replacing them may be the solution too.
I am wondering whether anyone has connected a USB 3.0 hub to the Axon 7.
The reason I ask is that I am going on a trip soon and want to back up my camera SD card each day to a USB stick. I don't want to take a laptop. What I'd like to do is connect a USB card reader / hub to the phone to copy files from the SD card to the USB stick at USB 3 speeds. Devices like the Ravpower wd03 only do usb 2, which will take ages per file.
Will this work? Will I need a USB 3 otg?
Sent from my ZTE A2017G using Tapatalk
Update - USB Hub Works - but.....
OK, so I took the plunge and bought an Aukey USB C to USB 3 adaptor and a USB hub - one of these. I did it that was as I don't have other USB C devices.
The USB hub works fine with USB memory sticks. Each time i insert it registers a new USB OTG drive and I can happily copy to and from it (and more than one
But every time I insert an SD card into the SD reader, the Axon 7 gives me an error "Unsupported USB Drive: This device doesn't support thus USB drive. Touch to set up in a supported format". When I try to format the card, it fails.
Any ideas?
Update 2
I should add that:
1. The same problem occurs even if I use the MicroSD card I use in the phone - so it is not a formatting issue.
2. I also have a Note 5. If I connect the USB hub to that via a USB OTG, the Note 5 can happily read the SD Card.
3. The SD slot USB Hub works fine when when plugged into a PC.
Do I need an additional USB OTG? Will that conflict with the phone?
Update 3!!!
This is getting ridiculous but I want it to work.
So I tried plugging a SD Card reader into the USB hub. Lo and behold it works!!!! I wonder whether the issue is just that the SD card reader in the hub is missing something which allows the Axon to read the SD card.
That was only USB 2 - I am going to invest in a USB 3 SD card reader (my camera produces large files!) So I am going to invest in a small USB card reader and will report back.
Update 4
So the card reader has arrived as has my USB 3 stick. Now I can copy all the files from the SD Card to the USB Stick.
The only issue is that Dropbox scans the cards and starts trying to upload them as Camera uploads so I've had to kill the process.
The other issue is that my file manager (File Manager HD) doesn;t allow copying and I have to use the System file Manager, which is awful. Am going to work on that process over the weekend. Any suggestions gratefully received on that front!!!
Rubbish. Rubbish. Rubbish
The connection just isn't stable enough. The phone keeps saying that the card(s) keeping g being disconnected / removed. There is nothing wrong with the hub or either the USB stick or the sync card / card reader.
Last chance - I will add a power supply to the USB hub. If that doesn't work I'm afraid my views will be confirmed - this is a great phone with a great DAC but other than that it is just a bit rubbish and cheap for a reason, with a manufacturer which doesn't want to develop for it. I'm the EU least.
Sent from my ZTE A2017G using Tapatalk
I've no idea if this will be of interest to any of you, especially those people who have yet to buy a 5t and are trying weigh up the pros and cons, but USB OTG is something I use all the time, so o it was one of the first things I tested when I got mine. So far I'm really pleased as everything I wanted to work does so. My last device, a Xiaomi Redmi Note 2, had very poor USB OTG implementation so this is great from my point of view. Maybe I'm behind the times and I had the last phone on the planet with that problem - if so, please delete this mods
First off, before you can use USB OTG, you need to head into settings, then advanced and check the OTG setting. It turns off after ten minutes so I created a link on my homepage using Nova launcher's activity widget menu.
*EDIT* As ny-hardcore has kindly pointed out below, you can also have an OTG quick toggle in notification area. This didn't work for me at first (or I was hitting the wrong thing), but now it does .
Tested and working:
USB card readers of various types, including micro USB readers, with the help of a USB C to Micro USB adapter (5 for £4 on eBay!). The only one that didn't work is a proprietary Samsung multi card reader that also has a full sized USB output and HDMI out too. This isn't very surprising of course, but they're to be avoided if you see one on eBay and assume it's a generic adapter.
80 GB iPod hard drive in a cheap enclosure bought via Amazon.
1 TB 2.5" Western Digital HDD - that's right, no USB hub required, just plug it straight in. The only other portable device I've owned could power it was a Samsung tablet.
2 mega pixel boroscope (using USB Camera app in Play Store) . So useful for finding slow water leaks under the floor or peering down a spark plug hole into a cylinder!!
Micro USB DVB TV dongle, via adapter.
Keyboards and mice via an OTG adapter, including a combination media keyboard with built in trackball mouse (this usually doesn't work on my phones for some reason). The UK keyboard layout is supported via settings so you can have a £ key - woohoo!
Other phones! I plugged my old phone in and discovered I could mount it in MTP mode and then browse its contents from the built in file explorer. For what it's worth, the Oneplus even charges the device that's connected to it.
When you need to eject the device there's a button that appears in the notification area. Sometimes this gets obscured, so swipe down a second time and the 'eject' will appear.
I haven't tried any game controllers yet, but so far the support has been so comprehensive I don't see why there would be a problem.
In the attached photo, the only thing that doesn't work is the black coloured multi purpose card reader on the far right.
In quick toggles you can add an otg switch.
You don't have to go in settings that way to enable otg.
ny-hardcore said:
In quick toggles you can add an otg switch
Click to expand...
Click to collapse
Thanks, for some reason that just didn't work for me unless I went into settings/advanced as well. I can't recall which firmware I was on at the time and I haven't tried since The quick toggles are so far away for my little hands too (please Oneplus add a Xiaomi one handed mode - in fact, make it EXACTLY like Xiaomi devices).
LOL, typical, now it does work for me! I was probably pressing flight mode by mistake or something.
Just FYI, I've tried the following USB DACs with an OTG cable on my 5T and they appear to work:
- Fiio E17
- Meridian Explorer (v1)
- Audioquest Dragonfly (v1)
I just discovered my old Saitek X35/X36 throttle/joystick combo works too! That's a first for one of my Android devices too. Now I need something fun to test it with
I'm using an IrigUA without any problem so far...
eboissier said:
I'm using an IrigUA without any problem so far...
Click to expand...
Click to collapse
Good news for the fret shredders out there
Are those also working well in twrp?
jkyoho said:
Are those also working well in twrp?
Click to expand...
Click to collapse
Sorry, I haven't tried. I'm still fully stock for now, including the recovery.
Has anyone gotten USB sound cards to work *for recording*.
Like I have a Terratec Aureon USB MkII and would like to livestream my DJ sets to Facebook via the FB app, by hooking up the line-out on my decks to the line-in on a soundcard hooked up to my phone and have the streamed video use the soundcard instead of the internal mic which sounds rubbish.
Edit: Tried it, and yes it works, but you have to hook up to the mic port, not the line in, and this doesn't seem like a great idea. Any idea how to change it?
Edit2: Scratch that, phone rebooted itself during a longer test
Lum_UK said:
Has anyone gotten USB sound cards to work *for recording*.
Like I have a Terratec Aureon USB MkII and would like to livestream my DJ sets to Facebook via the FB app, by hooking up the line-out on my decks to the line-in on a soundcard hooked up to my phone and have the streamed video use the soundcard instead of the internal mic which sounds rubbish.
Edit: Tried it, and yes it works, but you have to hook up to the mic port, not the line in, and this doesn't seem like a great idea. Any idea how to change it?
Edit2: Scratch that, phone rebooted itself during a longer test
Click to expand...
Click to collapse
That would be so cool if you can get it working. Wonder if it's the phone or the Terratec? I have NO experience in that area. Good luck! How much power does it draw? Would a powered USB hub in the mix help?
Hadn't thoughtof the power draw issue.
What I really need is a super cheap low power USB line-in of some sort. Though after further testing, FB live streaming is crap, with low quality audio and video in all the configurations I tried (Android app, Win10+Firefox, Win10 app) so I'm probably going to abandon this plan and try a different platform like Youtube or something.
Just cant get otg to work in my device, I am on OOS 4.7.5, rooted with SuperSu, tried a type c to micro USB adapter, also a type c to USB 3.0 adapter, I have enabled the otg option in advanced settings before plugging in the devices, I don't know whether its the phone or the adapter I use, what kind of adapter did you buy, is it a type c 3.1 to micro USB 2.0/ USB 3.0, could you provide me with a name of the adapter.
freegame619 said:
Just cant get otg to work in my device, I am on OOS 4.7.5, rooted with SuperSu, tried a type c to micro USB adapter, also a type c to USB 3.0 adapter, I have enabled the otg option in advanced settings before plugging in the devices, I don't know whether its the phone or the adapter I use, what kind of adapter did you buy, is it a type c 3.1 to micro USB 2.0/ USB 3.0, could you provide me with a name of the adapter.
Click to expand...
Click to collapse
I have the following USB OTG adapters.
2 X micro USB to full sized USB (the long type with a two inch cable).
1 X mini micro USB adapter that is tiny.
1 X micro USB adapter (bigger than above)
1 X USB C OTG adapter with micro SD card reader built in.
All of the above work. In the case of the micro USB OTG adapters, I'm using a USB C to Micro USB adapter (they're tiny, about 2 CM long).
In short, every USB OTG adapter I've put in it works. All are unbranded, generic adapters that I've bought from Amazon or eBay. I've never had to do anything more than enable OTG in settings.
Could it be something to do with the ROM you're using?
In the attached photo, the ones with a yellow Mark are micro USB OTG adapters. The one with a red mark is a USB C multi card reader (built in USB OTG). The one with a blue mark is a USB C to Micro USB adapter.
Lum_UK said:
Hadn't thoughtof the power draw issue.
What I really need is a super cheap low power USB line-in of some sort. Though after further testing, FB live streaming is crap, with low quality audio and video in all the configurations I tried (Android app, Win10+Firefox, Win10 app) so I'm probably going to abandon this plan and try a different platform like Youtube or something.
Click to expand...
Click to collapse
Sadly what you're doing is way beyond anything I've tried. I'm happy when I can get card readers and stuff to work
I vaguely recall reading about specifications for the older micro USB ports on phones and what type of power output they supported - not all were equal. For example, there were a bunch of Samsung phones and tablets that could power hard drives without needing a powered USB hub inline. Similarly, some could power an MHL connection to a TV without the adapter being plugged into a charger like most phones that supported MHL had to. I've forgotten the name for these specs, but presumably USB C is exactly the same and it'll be online somewhere. No idea what your Terratec draws or if that could be the problem - if our phones can spin a 1 TB hard drive then perhaps it's not an issue, I was just clutching at straws.
Good luck!
Ouzo said:
I have the following USB OTG adapters.
2 X micro USB to full sized USB (the long type with a two inch cable).
1 X mini micro USB adapter that is tiny.
1 X micro USB adapter (bigger than above)
1 X USB C OTG adapter with micro SD card reader built in.
All of the above work. In the case of the micro USB OTG adapters, I'm using a USB C to Micro USB adapter (they're tiny, about 2 CM long).
In short, every USB OTG adapter I've put in it works. All are unbranded, generic adapters that I've bought from Amazon or eBay. I've never had to do anything more than enable OTG in settings.
Could it be something to do with the ROM you're using?
In the attached photo, the ones with a yellow Mark are micro USB OTG adapters. The one with a red mark is a USB C multi card reader (built in USB OTG). The one with a blue mark is a USB C to Micro USB adapter.
Click to expand...
Click to collapse
I am on official OOS 4.7.5 rooted with supersu, on which rom are you, is it 4.7.4, are you rooted, are you using any custom kernel.
freegame619 said:
I am on official OOS 4.7.5 rooted with supersu, on which rom are you, is it 4.7.4, are you rooted, are you using any custom kernel.
Click to expand...
Click to collapse
4.7.4 Stock. Stock recovery too (not rooted either).
USB OTG worked on stock 4.7.2 as well.
Working fine for me, stock, custom roms etc. Use a cableconnection usb/otg cable 6" in length. Just enable OTG in the swipe down, plus USB stick in...no problems.
I gave up on using the phone for this because the audio quality via the FB app is terrible anyway, so I nicked my GF's Windows laptop and started using OBS for streaming instead.
Power aside, it's awesome that an external sound card will work (kinda) for recording though!.
techlogik said:
Working fine for me, stock, custom roms etc. Use a cableconnection usb/otg cable 6" in length. Just enable OTG in the swipe down, plus USB stick in...no problems.
Click to expand...
Click to collapse
On which ROM version are you on, is OOS 4.7.5 or another version of OOS or some other ROMs.
---------- Post added at 04:30 AM ---------- Previous post was at 04:28 AM ----------
Ouzo said:
4.7.4 Stock. Stock recovery too (not rooted either).
USB OTG worked on stock 4.7.2 as well.
Click to expand...
Click to collapse
Thanks for the reply, I am beginning to think that it kind of an issue with OOS 4.7.5, I have to flash the old version and try my luck on it.