Encryption issue after flashing LineageOS 14.1 and SuperSU - ZTE Axon 7 Questions & Answers

Hi
I'm having this very weird issue with my phone (A2017G). I unlocked BL, installed TWRP, updated to TWRP 3.0.3-1, formatted data, factory reset, install A2017G_Nougat_Bootloader+ModemFix, factory reset again, install LineageOS and then boot. The device booted fine.
I noticed root wasn't built-in so I flashed SuperSU V2.65. After a reboot, my phone won't let me boot into the system anymore. I get asked for a password. Whatever password I enter, it says "Decryption Unsuccesful. The password is correct, but data is corrupt". When I reboot to TWRP and format data and then factory reset, nothing changes. I keep getting the prompt before system boots. Even re-flashing the bootstack and lineageOS doesn't help. I know flashing anything else will brick my phone, so I refrained from doing that.
What am I doing wrong here?
Note that TWRP reads both my internal storage and my SDcard. However, internal storage contains only the folder "TWRP". When I go up a level, I can see the normal folders like "boot", "cache", "data", "dev" and so on. In the "backup" menu, DATA also shows as "0MB"
File system says "f2fs". Do I repair/change it?
Thanks

Ah,
I have/had the same error. Looks like this needs to be changed to ext4.
CU
Joerg

Controllerboy said:
Hi
I'm having this very weird issue with my phone (A2017G). I unlocked BL, installed TWRP, updated to TWRP 3.0.3-1, formatted data, factory reset, install A2017G_Nougat_Bootloader+ModemFix, factory reset again, install LineageOS and then boot. The device booted fine.
I noticed root wasn't built-in so I flashed SuperSU V2.65. After a reboot, my phone won't let me boot into the system anymore. I get asked for a password. Whatever password I enter, it says "Decryption Unsuccesful. The password is correct, but data is corrupt". When I reboot to TWRP and format data and then factory reset, nothing changes. I keep getting the prompt before system boots. Even re-flashing the bootstack and lineageOS doesn't help. I know flashing anything else will brick my phone, so I refrained from doing that.
What am I doing wrong here?
Note that TWRP reads both my internal storage and my SDcard. However, internal storage contains only the folder "TWRP". When I go up a level, I can see the normal folders like "boot", "cache", "data", "dev" and so on. In the "backup" menu, DATA also shows as "0MB"
File system says "f2fs". Do I repair/change it?
Thanks
Click to expand...
Click to collapse
I would say the answer lies with issues between f2fs and SuperSU
https://www.xda-developers.com/xda-...upersu-has-trouble-with-f2fs-data-partitions/
Sent from my SM-P600 using XDA-Developers Legacy app

And you flash the wrong SuperSU, the one needed is either v.2.79 or v.2.79-R3. try booting back to TWRP and clean Flash Lineage again and flash either one of the SuperSu I Mention before.

I have the same after install unofficial lineage 14.1 'decryption unsuccessful'
On TWRP 3.0.3-1 I go in 'wipe', then 'advanced wipe' and select 'Data', press 'Repair or Change File System' and then 'Change File System' to EXT4
That's work fine on my 2017G
For root
download.lineageos.org/extras
The arm64 zip
After install with TWRP go in deployment options and activated it!
Lineage is running with root

Thanks, everyone. That worked. I was quite worried for a while, I really don't want tot RMA the device a second time due tot me messing things up.

Where do I find the options in Twrp for deployment

jdg007 said:
Where do I find the options in Twrp for deployment
Click to expand...
Click to collapse
Twrp have no deployment option, what won't you to do.

joergwrage said:
Ah,
I have/had the same error. Looks like this needs to be changed to ext4.
CU
Joerg
Click to expand...
Click to collapse
Probably it is caused by a known bug in the f2fs implementation in the kernel. Only @Unjustified Dev can solve it. Some people who already was using f2fs with TWRP 3.0.4 and LineageOS 13.1 are not having those issues and they were able to dirty flash the new LOS 14.1.
Updating to TWRP 3.0.3-1 is very recommended. TWRP 3.0.2 has some problems when flashing zips. SuperSU is one of them.

i Also need help guys :/ my auto rotate isnt working. neither is mu auto brightness :/

crazynitro said:
i Also need help guys :/ my auto rotate isnt working. neither is mu auto brightness :/
Click to expand...
Click to collapse
I have the same

Related

How can I install Oxygen OS 5.0.1 with an unlocked bootloader?

Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Flash through stock recovery
Hitman478™ said:
Flash through stock recovery
Click to expand...
Click to collapse
I haven't done this kind of thing yet.
If I do this, will my data be wiped out or not?
What about using the OTA notification ?
quick05 said:
What about using the OTA notification ?
Click to expand...
Click to collapse
What do you mean?
I tried to update my phone using the normal way but after downloading and tried to install it, it failed because my bootloader is unlocked.
I just made a backup of data using codeworkx recovery. Copied the backup (Along with the files on userdata I wanted to keep) to my PC.
Wiped all and formatted data. Then installed Oreo and copied back the files and data backup from the pc to the phone and restored data with codeworkx recovery again.
Then flashed magisk 15.2 and rebooted.
Everything working fine now.
shriekyphantom said:
Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Click to expand...
Click to collapse
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
pleomaxell said:
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
Click to expand...
Click to collapse
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
jmoricone said:
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
Click to expand...
Click to collapse
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
jmoricone said:
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
Click to expand...
Click to collapse
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
SysAdmNj said:
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
Click to expand...
Click to collapse
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
jmoricone said:
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
Click to expand...
Click to collapse
You can ask that question on the TWRP thread. May be they can answer it correctly. I guessed that twrp-3.2.1-0-universal-codeworkx-cheeseburger.img was for both Nougat and Oreo and that is why I used it. So, if you want to be sure you should ask that on a TWRP thread.
pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
jmoricone said:
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
Click to expand...
Click to collapse
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Aarju said:
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Click to expand...
Click to collapse
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
jmoricone said:
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
Click to expand...
Click to collapse
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Aarju said:
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Click to expand...
Click to collapse
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
jmoricone said:
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
Click to expand...
Click to collapse
Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors.
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
I received the following tip
"Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors."
But this makes no sense to me.
I have formatted my phone / wiped data / have the full rom & magisk on my "/sdcard" / went to install zip via TWRP, selected the rom and received the error message.
I decided to just go and upgrade via OTA and that failed. My phone has rebooted back to stock
what am i doing wrong?

For those using magisk, was the upgrade to Oreo worth it?

Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
SysAdmNj said:
Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
Click to expand...
Click to collapse
Just flash the full zips from TWRP and reflash Magisk to maintain root.
SysAdmNj said:
Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
Click to expand...
Click to collapse
I didn't need to lock the bootloader again to update to Oreo from rooted and encrypted Nougat. This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
pleomaxell said:
I didn't need to lock the bootloader again to update to Oreo from rooted and encrypted Nougat. This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
beningodfrey4 said:
Just flash the full zips from TWRP and reflash Magisk to maintain root.
Click to expand...
Click to collapse
Yes but is there a way to dirty flash so you don't have to wipe your data?
Yes, obviously a lot more steps to remain encrypted, but worth it if you want to keep your data intact. Do try it out and reply the outcome on that thread.
https://forum.xda-developers.com/oneplus-5/how-to/guide-upgrade-nougat-rooted-encrypted-t3734779
You guys don't understand. Any tutorial that includes "format data" means EVERYTHING gets wiped - even internal storage.
The OP is asking for a way to avoid it, and I think there isn't any. So you either bite the bullet or stay where you are.
Also, I had trouble flashing Magisk 15.3 with codeworkx recovery. Worked fine with bluspark.
Rhoban said:
You guys don't understand. Any tutorial that includes "format data" means EVERYTHING gets wiped - even internal storage.
The OP is asking for a way to avoid it, and I think there isn't any. So you either bite the bullet or stay where you are.
Also, I had trouble flashing Magisk 15.3 with codeworkx recovery. Worked fine with bluspark.
Click to expand...
Click to collapse
Do you think its worth the jump? Are you seeing better battery life or any other improvements?
SysAdmNj said:
Do you think its worth the jump? Are you seeing better battery life or any other improvements?
Click to expand...
Click to collapse
It feels a bit faster, but I used to run Boeffla Kernel with battery optimized interactive governor on Nougat. So that's probably why.
As for battery, I don't really see a big improvement.
The biggest benefit was a clean system and internal storage. Don't even have face unlock, so can't comment on that.
I am happy with oreo!
Magisk
xposed framework sdk26 v90beta1
greenify + boost

Axon 7 randomly stopped booting

Hi there, I have an Axon 7 with LineageOS that was working like a charm until I rebooted it today. It was in the normal lineage OS boot animation with the blue circle moving from right to left, except it never stopped. Now after trying a few more times, it just keeps playing the animation except the phone will vibrate slightly every several seconds. The phone is encrypted but that hasn't been a problem. When I reboot to TWRP, it says Unable to mount storage.
I tried wiping Cache and Dalvik / ART Cache, but this didn't help. Finally, I do have a backup from 7-20-2017 but I'd rather not have to go back to that...
Any recommendations?
Chrono7x said:
Hi there, I have an Axon 7 with LineageOS that was working like a charm until I rebooted it today. It was in the normal lineage OS boot animation with the blue circle moving from right to left, except it never stopped. Now after trying a few more times, it just keeps playing the animation except the phone will vibrate slightly every several seconds. The phone is encrypted but that hasn't been a problem. When I reboot to TWRP, it says Unable to mount storage.
I tried wiping Cache and Dalvik / ART Cache, but this didn't help. Finally, I do have a backup from 7-20-2017 but I'd rather not have to go back to that...
Any recommendations?
Click to expand...
Click to collapse
So you can't see the internal storage from TWRP? I'm guessing encryption actually plays a part here. Formatting data is probably the best course of action, though you should flash magisk or superSu if you do, to get rid of encryption. But you obviously lose everything that's on the internal storage.
Maybe make a system and boot backup and clean flash Lineage. Like, wipe system and caches, then flash the bootloader, modem, LOS and whatever else you flash
Choose an username... said:
So you can't see the internal storage from TWRP? I'm guessing encryption actually plays a part here. Formatting data is probably the best course of action, though you should flash magisk or superSu if you do, to get rid of encryption. But you obviously lose everything that's on the internal storage.
Maybe make a system and boot backup and clean flash Lineage. Like, wipe system and caches, then flash the bootloader, modem, LOS and whatever else you flash
Click to expand...
Click to collapse
Is it easier to just use the backup I have currently? If so, what are the steps necessary for that (sorry for newb questions, haven't messed with it in a while)
EDIT: Also, TWRP claims decryption is successful when it is loading up.
Chrono7x said:
Is it easier to just use the backup I have currently? If so, what are the steps necessary for that (sorry for newb questions, haven't messed with it in a while)
EDIT: Also, TWRP claims decryption is successful when it is loading up.
Click to expand...
Click to collapse
Again. Can you see the internal storage?
Don't restore the backup. Your problem is basically either on /system (clean flash of the ROM will do) or on /data (complete format of data is needed). So try the non destructive one first
Choose an username... said:
Again. Can you see the internal storage?
Don't restore the backup. Your problem is basically either on /system (clean flash of the ROM will do) or on /data (complete format of data is needed). So try the non destructive one first
Click to expand...
Click to collapse
I don't see any storage folder. So if I want to install the latest LOS and frankly just start from scratch, can I follow the guide here https://wiki.lineageos.org/devices/axon7/install#installing-lineageos-from-recovery starting from "Installing LineageOS from recovery"? Will I still need to install something to wipe the encryption?
Chrono7x said:
I don't see any storage folder. So if I want to install the latest LOS and frankly just start from scratch, can I follow the guide here https://wiki.lineageos.org/devices/axon7/install#installing-lineageos-from-recovery starting from "Installing LineageOS from recovery"? Will I still need to install something to wipe the encryption?
Click to expand...
Click to collapse
What? No... That's for normal phones. How did you manage to install LOS without knowing that you need the univ. bootloader and modem?
So, you can't access the internal storage via the file manager on TWRP i'm guessing.
Wipe - Format data, after that flash the Universal bootloader, modem, LOS, Magisk, GApps. Magisk takes care of dm-verity and disables encryption. Don't try to uninstall it though or your internal storage will get encrypted as soon as you do. But if you want to change ROMs you can just fpash it before booting and it won't ger encrypted.

Can't create a backup through TWRP.

I tried creating a system backup through TWRP just now for the first time ever. Throughout the process, it gave me multiple messages saying "unable to mount data" and the same for some other folders, and when the backup supposedly finished, it just said failed.
Is there anything I can try without actually wiping either of the partitions? This obviously because I'm trying to create a backup so I can wipe afterwards.
cyborgium said:
I tried creating a system backup through TWRP just now for the first time ever. Throughout the process, it gave me multiple messages saying "unable to mount data" and the same for some other folders, and when the backup supposedly finished, it just said failed.
Is there anything I can try without actually wiping either of the partitions? This obviously because I'm trying to create a backup so I can wipe afterwards.
Click to expand...
Click to collapse
In twrp main menu screen select ' Mount ' menu and make sure mount data is ticked then go back and try backing up again.
spawnlives said:
In twrp main menu screen select ' Mount ' menu and make sure mount data is ticked then go back and try backing up again.
Click to expand...
Click to collapse
Thanks for your reply, it doesn't actually let me tick that box. Nothing happens when I tick it. It also says that the data partition is 0mb. Any idea what that might mean?
cyborgium said:
Thanks for your reply, it doesn't actually let me tick that box. Nothing happens when I tick it. It also says that the data partition is 0mb. Any idea what that might mean?
Click to expand...
Click to collapse
Which version of twrp are you using
Latest is 3.2.3.0 which should fix the data issue ( it"s a known issue).
spawnlives said:
Which version of twrp are you using
Latest is 3.2.3.0 which should fix the data issue ( it"s a known issue).
Click to expand...
Click to collapse
That's the TWRP version that I've got installed.
I just reinstalled both stock firmware and reflashed TWRP but the exact same issue persists. At first I was able to mount data though, I could flash zips such as Magisk etc. But after having set everything up again on my phone, I couldn't mount data anymore.
cyborgium said:
That's the TWRP version that I've got installed.
I just reinstalled both stock firmware and reflashed TWRP but the exact same issue persists. At first I was able to mount data though, I could flash zips such as Magisk etc. But after having set everything up again on my phone, I couldn't mount data anymore.
Click to expand...
Click to collapse
Not sure on your steps to install twrp
Have you tried going into twrp in wipe menu and format data
spawnlives said:
Not sure on your steps to install twrp
Have you tried going into twrp in wipe menu and format data
Click to expand...
Click to collapse
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
cyborgium said:
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
Click to expand...
Click to collapse
Sounds like your device is still encrypted
Did you flash the no Verity encrypt zip file
Also I said to format data not wipe.
In the mount menu these are the options I have enabled.
spawnlives said:
Sounds like your device is still encrypted
Did you flash the no Verity encrypt zip file
Also I said to format data not wipe.
In the mount menu these are the options I have enabled.
Click to expand...
Click to collapse
You're right, I formatted data, not wipe.
I did flash the no verity zip, does the order in which I flash Magisk, no-verity and RMM state unlock matter?
cyborgium said:
You're right, I formatted data, not wipe.
I did flash the no verity zip, does the order in which I flash Magisk, no-verity and RMM state unlock matter?
Click to expand...
Click to collapse
The instructions I followed to install twrp
Flash twrp (which you have done)
Format data
When finished reboot back into twrp(use twrp reboot menu option)
Flash no-verity zip via twrp ( have to make sure you have it on internal storage or SD card)
Then flash everything else
Not sure if you need RMM state unlock if your bootloader(OEM) is already unlocked in developer options though.
spawnlives said:
The instructions I followed to install twrp
Flash twrp (which you have done)
Format data
When finished reboot back into twrp(use twrp reboot menu option)
Flash no-verity zip via twrp ( have to make sure you have it on internal storage or SD card)
Then flash everything else
Not sure if you need RMM state unlock if your bootloader(OEM) is already unlocked in developer options though.
Click to expand...
Click to collapse
I've just done everything you stated above, still the same issue, can't mount /data.
Really don't understand what it is that im doing wrong or if I'm even doing anything wrong..
Thanks for your help anyway though, appreciate it.
cyborgium said:
I've just done everything you stated above, still the same issue, can't mount /data.
Really don't understand what it is that im doing wrong or if I'm even doing anything wrong..
Thanks for your help anyway though, appreciate it.
Click to expand...
Click to collapse
Just as matter of curiosity I use FX file explorer (root) in the menu filesystem it should tell you what format your data partition is mine or ext4. I have read that some people through twrp have changed it to something like ext3 and then back to ext4
Also this is the thread I used to install my twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
This thread may also help you out
https://forum.xda-developers.com/ga...ment/fix-data-mount-fix-s8-twrp-oreo-t3769254
spawnlives said:
Just as matter of curiosity I use FX file explorer (root) in the menu filesystem it should tell you what format your data partition is mine or ext4. I have read that some people through twrp have changed it to something like ext3 and then back to ext4
Also this is the thread I used to install my twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
This thread may also help you out
https://forum.xda-developers.com/ga...ment/fix-data-mount-fix-s8-twrp-oreo-t3769254
Click to expand...
Click to collapse
I think that second thread you linked may have done the trick.
At first it didn't seem to help, but when I tried it again after reflashing everything, I am now able to mount /data.
I'm still in the dark as to why this happened and hasn't happened to anyone else other than the person who created that file, but either way, thank you very much for your help.
cyborgium said:
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
Click to expand...
Click to collapse
Try the modded twrp from nx thread

Can't find downloads in twrp

After doing the Tmo to international conversion, I downloaded a new rom and appropriate files. They show in ES File Explorer, but I am unable to locate them in TWRP. Anyone have this issue, I have to be missing something. Thanks in advance.
just put them in downloads and go there in twrp
Downloads folder literally doesn't exist in TWRP for me.
The whole file system looks different at / in TWRP than in ES explorer.
You need to mount sdcard/storage in TWRP
I have tried with no success. Under mount it won't even allow me to click the option to mount sd card. When I click sd card in the list I get a slew of folders with random character names (ie- ggDjkk7hFJJgGvV)
I have noticed in my oos system settings my phone shows encrypted. Could this be why? Is there a way to turn off encryption that I'm not seeing, if this is the cause?
Floridaplur said:
I have tried with no success. Under mount it won't even allow me to click the option to mount sd card. When I click sd card in the list I get a slew of folders with random character names (ie- ggDjkk7hFJJgGvV)
Click to expand...
Click to collapse
That means it's still encrypted. What version of TWRP are you using? My guess is you are using the wrong TWRP. You can try booting back into OOS and removing your PIN / Password / fingerprints.
Otherwise you may have to boot back into OOS, backup your data, and format the data partition. Reboot to recovery again, then transfer whatever you need to TWRP, flash, and it will re-encrypt on the next boot. Again though, make sure you have the correct TWRP first before you go through all this trouble.
I am using bluespark TWRP that was in the guide to Tmo intl conversion.
Floridaplur said:
I am using bluespark TWRP that was in the guide to Tmo intl conversion.
Click to expand...
Click to collapse
have u tried the other twrp builds that may be more up to date?
Floridaplur said:
I am using bluespark TWRP that was in the guide to Tmo intl conversion.
Click to expand...
Click to collapse
Yes, that one will give you the issue. The encryption did not seem to be working in it.
You should use the latest version of this recovery to resolve your issue: [RECOVERY][3.3.0-2][fajita]Official/Unofficial TWRP recovery for OnePlus 6T (Stable)
So after updating to twrp 3.2.2, I was successfully able to clean install havok and have everything working. What I have noticed though, is that after booting into the rom, it is encrypted again.
The first go I realized I had the wrong gapps, so I downloaded the correct one, and rebooted to recovery. At this point it was encrypted and I couldn't see downloads again. I decided to do a data and cache wipe and installed everything via adb sideload and it went perfectly. I guess this phone just wants me to only load roms when I have my laptop with me. Either way, I'm up and running. I miss how easy things we're back in the HTC Evo days.

Categories

Resources