Related
Hey, so I rooted my Galaxy S7 edge exynos, and everything was great. However, when I boot into recovery, TWRP can't do anything. It can't backup, install images, nothing. It says my memory is 0mb, and if I try to backup it says "cannot mount /data and unable to find crypto footer". I can restart my phone to system and everything works perfectly. Is there a way to fix this? I'm using latest version of TWRP (3.0.2)
Thanks guys!
Byyz said:
Hey, so I rooted my Galaxy S7 edge exynos, and everything was great. However, when I boot into recovery, TWRP can't do anything. It can't backup, install images, nothing. It says my memory is 0mb, and if I try to backup it says "cannot mount /data and unable to find crypto footer". I can restart my phone to system and everything works perfectly. Is there a way to fix this? I'm using latest version of TWRP (3.0.2)
Thanks guys!
Click to expand...
Click to collapse
FORMAT DATA, it's explicitly stated in the instructions. You must format data to wipe encryption.
Sent from my Pebble Time
Brava27 said:
FORMAT DATA, it's explicitly stated in the instructions. You must format data to wipe encryption.
Sent from my Pebble Time
Click to expand...
Click to collapse
Is there no way around this at all? It's really a hassle having to reset my phone every time.
Is there at least a way to install xposed without formatting?
Thanks!
Byyz said:
Is there no way around this at all? It's really a hassle having to reset my phone every time.
Is there at least a way to install xposed without formatting?
Thanks!
Click to expand...
Click to collapse
You only do this once, use flashfire or titanium backup to backup your stuff.
did you flash this after TWRP?
"If you only want a bootable system partition or writable data in TWRP:
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP."
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
same here !:<
Same problem a few days ago. Caused by secure startup or encrypt device obviously lol. Only fix for read/write on data/internal storage is factory reset in stock recovery. Unfortunately this was the only fix for my fussy G935F.
TWRP couldn't mount data to wipe anyway I tried and the only way to flash was through selecting extSD.
i dont have escription enabled though ._.
jgalvez21 said:
i dont have escription enabled though ._.
Click to expand...
Click to collapse
I find a solution, just go in wipe and format data , it will removes encryption on internal storage. if not works try a factory reset in stock recovery them try again, S7 is encrypted out of the box and Twrp can't read or mount data. Works for me in G935F.
how long does it take to format? i chose exfat and it's taking ages... am i doing something wrong?
Brava27 said:
FORMAT DATA, it's explicitly stated in the instructions. You must format data to wipe encryption.
Sent from my Pebble Time
Click to expand...
Click to collapse
i unlocked a nexus 5 and got the same problem, formatted data, all seems good now
is there a way to save my data? my phone is oneplusone
if you use twrp to flash xposed, it'll still work. But your data is still encrypted.
Should I do anything else after the Formating data (install TWRP again, root again...)?
I remember that I did format data in my last phone and it completely deleted everything including OS, so now im little afraid.
Currently I can't do nothing in TWRP, not wipe and not backup...
Nitzans said:
Should I do anything else after the Formating data (install TWRP again, root again...)?
I remember that I did format data in my last phone and it completely deleted everything including OS, so now im little afraid.
Currently I can't do nothing in TWRP, not wipe and not backup...
Click to expand...
Click to collapse
Just format data and you will be able to use twrp.
fureedx said:
Just format data and you will be able to use twrp.
Click to expand...
Click to collapse
Thanks, it worked! Too bad that the only way to get this is by loosing all the data .
Hi all,
I followed instruction on installing TWRP and also have root. I also installed the no-verity-opt-encrypt.zip file, but I still can't access internal SD. It says 0mb. Also after installing the zip it similar stated 'unable to mount'.
When I try to format data it can't mount it.
am i missing a step??
ideas?
Thanks in advance...
PS: not sure if this is relevant, but it keep coming up with the same flash screen message: "keep system read only?"
I tick the box says don't display this, and swipe to allow modifications, but get this message every time.
The_Hammer said:
Hi all,
I followed instruction on installing TWRP and also have root. I also installed the no-verity-opt-encrypt.zip file, but I still can't access internal SD. It says 0mb. Also after installing the zip it similar stated 'unable to mount'.
When I try to format data it can't mount it.
am i missing a step??
ideas?
Thanks in advance...
PS: not sure if this is relevant, but it keep coming up with the same flash screen message: "keep system read only?"
I tick the box says don't display this, and swipe to allow modifications, but get this message every time.
Click to expand...
Click to collapse
You have to format the data after you installed twrp. And then you can flash supersu and no verity opt thingie.
Thanks for the reply... It wont let me format it. 'says can not mount'
I'm having the same issue here. Although I can root, I cannot wipe data, so no way to install a custom ROM
Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
SysAdmNj said:
Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
Click to expand...
Click to collapse
Just flash the full zips from TWRP and reflash Magisk to maintain root.
SysAdmNj said:
Seems, I need to lock bootloader to take official update. Is it worth the hassle of backing up all data, and upgrading to oreo?
Click to expand...
Click to collapse
I didn't need to lock the bootloader again to update to Oreo from rooted and encrypted Nougat. This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
pleomaxell said:
I didn't need to lock the bootloader again to update to Oreo from rooted and encrypted Nougat. This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
beningodfrey4 said:
Just flash the full zips from TWRP and reflash Magisk to maintain root.
Click to expand...
Click to collapse
Yes but is there a way to dirty flash so you don't have to wipe your data?
Yes, obviously a lot more steps to remain encrypted, but worth it if you want to keep your data intact. Do try it out and reply the outcome on that thread.
https://forum.xda-developers.com/oneplus-5/how-to/guide-upgrade-nougat-rooted-encrypted-t3734779
You guys don't understand. Any tutorial that includes "format data" means EVERYTHING gets wiped - even internal storage.
The OP is asking for a way to avoid it, and I think there isn't any. So you either bite the bullet or stay where you are.
Also, I had trouble flashing Magisk 15.3 with codeworkx recovery. Worked fine with bluspark.
Rhoban said:
You guys don't understand. Any tutorial that includes "format data" means EVERYTHING gets wiped - even internal storage.
The OP is asking for a way to avoid it, and I think there isn't any. So you either bite the bullet or stay where you are.
Also, I had trouble flashing Magisk 15.3 with codeworkx recovery. Worked fine with bluspark.
Click to expand...
Click to collapse
Do you think its worth the jump? Are you seeing better battery life or any other improvements?
SysAdmNj said:
Do you think its worth the jump? Are you seeing better battery life or any other improvements?
Click to expand...
Click to collapse
It feels a bit faster, but I used to run Boeffla Kernel with battery optimized interactive governor on Nougat. So that's probably why.
As for battery, I don't really see a big improvement.
The biggest benefit was a clean system and internal storage. Don't even have face unlock, so can't comment on that.
I am happy with oreo!
Magisk
xposed framework sdk26 v90beta1
greenify + boost
Hi everyone,
I have been happy with the Marshmellow version the OS since I bought my phone when it came out (Unlocked, Encrypted). I have performed one update since I had the phone. Today, after seeing the latest posts after not being on this site for a year, I decided to make the move to upgrade to OOS 5.1.0!! Why not, nothing else going on this weekend. I upgrade TWRP to 3.2.1-1, I make a full backup, I follow the upgrade instructions... it fails with the continuous spinning balls on reboot. I Do some research... oh, it is "challenging" to upgrade but possible. No big deal, I will just restore my backup and try again at some other time. My backup restore fails Error 255, I try the fixeS I found such as unmounting data... No Luck). Can not restore the data partition. I guess I should have decrypted everything prior to backing up based on what I read later.
I at least backed up my SD card using adb prior to all this, so I decided to just reinstall ANY OS to get my phone running again for tonight. Well I have not had much luck. I downgraded TWRP to 3.2.1-0, I have tried installing:
OnePlus5Oxygen_23_OTA_033_all_1804110400_eb1766 - Originally installed with not errors but phone reboots back into TWRP after a failed 1st reboot. (I do get a "failed to mount /vendor")
lineage-15.1-20180423-nightly-cheeseburger-signed with Gapps (Gapps failed with I think a error 7)
I was messing with the data partition, wiped, formatted, etc. I am sure this is some of the issues. One other thing is that TWRP always boots to the "keep System Read only" I find this strange and had never seen before. I select to allow modification, but it seems like nothing changes on reboot.
At this point I would just like to get a stock OS image on the phone. IS there something I am missing?
https://forum.xda-developers.com/oneplus-5/how-to/guide-mega-unbrick-guide-hard-bricked-t3698370
Sounds good, let me give it a try.
I've been thru this already. Here is the simplest way to get your 1+5 back to work, while having the latest LineageOS installed. It takes a bit of time and patience, but it works:
Using fastboot, reinstall TWRP 3.2.1-1 (or newer, if any)
Wipe all partitions, namely Dalvik/ART cache, Cache, System, Data and Internal storage
Sideload the latest OOS (version 5.10 or later, if any) with Android 8.1. This version will be OK for LineageOS 15.1 and you will no longer have that stupid error 7 when installing LOS 15.1
If OOS boots into recovery and asks for passwords or PIN or schema ... click on the "forgotten" link. OOS Recovery will then remove encryption and wipe out any data that was left.
Reboot phone, and start OOS session. Do not use any security stuff (PIN or schema or whatever) that would encrypt the phone. At least not now - If necessary, you will add it at the end of this whole process.
Once OOS is working, reboot to Bootloader. Since TWRP has been erased with OOS default recovery, you will have to reinstall it.
From TWRP, wipe Dalvik/ART cache, Cache, and Data partitions. This time, do not touch System or Internal storage
Sideload Lineage OS latest version. If you need to use Google Apps (e.g. Open Gapps), sideload it now before rebooting
Reboot (you might have to reboot twice, don't worry about that).
Once booted in LineageOS, do whatever you like - add accounts, root phone, etc.
Enjoy! (you may want to shout "Vive la France!", well ... don't hesitate!)
Sorry for my poor English. If anything here is unclear to you, please let me know.
I Have no idea what happened. I came home to start working on my phone, powered it up, and boom I have Android 8.1. Ok, Whatever...
Now I wonder if I should go for lineage or not.
kuhnto said:
Now I wonder if I should go for lineage or not.
Click to expand...
Click to collapse
It all depends on how important privacy is to you. If you don't care, then stick to the original OnePlus firmware. If you do, then switch to LineageOS.
So, I've been reading ad nauseum on this topic with regards to flashing new ROMs on my 6t and getting locked out due to decryption.
Among other threads and places across the interweb, I've read all of these:
https://forum.xda-developers.com/search/forum/8259?query=Encryption
During my travels I've discovered that the s**t doesn't really hit the fan until "data" is wiped via TWRP. I see that the recommend process for flashing new ROMs goes like this:
Boot on twrp
Flash ROM
Flash twrp installer
Reboot to twrp
Factory reset
Reboot to system
Am I understanding this correctly that if I transpose steps 4 and 5, then I shall plan on losing all of my data, but if I reboot from TWRP (right back into TWRP) before step 5 (aka data wipe), I shouldn't loose my data?
Assuming that is correct, does it matter if I leave a lock screen password enabled before rebooting to TWRP from the soon-to-be replaced ROM? I ask this because removing the lock screen password did not seem to reduce my chances of encountering permananly encrypted data.
Thanks!
notorious.dds said:
So, I've been reading ad nauseum on this topic with regards to flashing new ROMs on my 6t and getting locked out due to decryption.
Among other threads and places across the interweb, I've read all of these:
https://forum.xda-developers.com/search/forum/8259?query=Encryption
During my travels I've discovered that the s**t doesn't really hit the fan until "data" is wiped via TWRP. I see that the recommend process for flashing new ROMs goes like this:
Boot on twrp
Flash ROM
Flash twrp installer
Reboot to twrp
Factory reset
Reboot to system
Am I understanding this correctly that if I transpose steps 4 and 5, then I shall plan on losing all of my data, but if I reboot from TWRP (right back into TWRP) before step 5 (aka data wipe), I shouldn't loose my data?
Assuming that is correct, does it matter if I leave a lock screen password enabled before rebooting to TWRP from the soon-to-be replaced ROM? I ask this because removing the lock screen password did not seem to reduce my chances of encountering permananly encrypted data.
Thanks!
Click to expand...
Click to collapse
Yes. For the love of god. Someone please clear up how we can flash on the go. I don't always have access to a computer with Adb/fastboot.
Every time I try to switch roms, upon rebooting to TWRP, my folders encrypt. Then I have to format data and voila, no fricking ROM to flash and I'm stuck
idkwhothatis123 said:
Yes. For the love of god. Someone please clear up how we can flash on the go. I don't always have access to a computer with Adb/fastboot.
Every time I try to switch roms, upon rebooting to TWRP, my folders encrypt. Then I have to format data and voila, no fricking ROM to flash and I'm stuck
Click to expand...
Click to collapse
Yeah A/B partition are a nuisance when it comes to flashing. I'd recommend you to do a clean flash of the ROM. Follow these steps.
1. Download the Latest Stable OOS from OnePlus's Website. Download the ROM ZIP of your Choice as well as the latest TWRP Installer. Transfer these to your phone and also copy them to a Laptop as you might have to Format Data.
2. Now Reboot to Recovery and flash OOS ZIP and TWRP Installer. Let it finish. Once it's done Reboot to Recovery from Within TWRP.
3. Again flash OOS and TWRP Installer. If for some reason your folders are messed up (as you posted in the image earlier) just go to Wipe and Format Data. And transfer the OOS and TWRP Installer to Internal and Flash them. Let it finish.
4. Once that's done, now again Reboot to Recovery and now flash ROM and TWRP Installer. After that's done, again Reboot to Recovery.
5. Again, flash ROM and TWRP Installer. Once done, Reboot to Recovery.
6. Now flash Gapps of your Choice. Stock are Recommend while anything above Nano will work. AROMA won't work. Once Gapps are flashed now go to Wipe and do a Factory Reset (Swipe to Factory Reset). Once that's Done, hit Reboot System and wait for the ROM to Load.
7. After the Initial Setup, Reboot to Recovery and flash Magisk and Custom Kernel if you want.
Personally I Format Data after flashing Gapps to get a "clean install". But that's not necessary. Also if you want to flash ROMs often I'd suggest investing in Swift Backup. It's an excellent app for Backups and can Backup almost Anything. Hope this helps.
This is what I do. Occasionally I get the Encrypted Folders but if followed correctly all is smooth. I can flash any ROM without Encryption. Except maybe stock OOS.
Thanks Mannan.
However, what I'm really looking for is someone to explain the following:
1. Which action or actions is it that triggers the phone to be encypted without a way to decrypt when flashing a new rom? My suspicion is that if the phone was encrypted while having been boot from slot A, then wiping data while in slot A results in data loss. By extension, rebooting into slot B and then wiping data allows slot B to now hold the encryption key. I'm sure this theory has got some errors, but it's the best I can come up with having no intrinsic knowledge on the topic.
2. Are there any means of mitigating data loss should the phone become encrypted? I.e. If possible, can I back up data (minus /data/media) and then restore that when I can't get access to /data/media?
With regards to question #1, I developed my "suspicion" after lossing ambition to test it. When I get my ambition back to fight this issue, I'll try again. I'm just getting sick of transfering 25+ gigs of data via adb every time the data gets encrypted and I can't get it decrypted.
notorious.dds said:
Thanks Mannan.
However, what I'm really looking for is someone to explain the following:
1. Which action or actions is it that triggers the phone to be encypted without a way to decrypt when flashing a new rom? My suspicion is that if the phone was encrypted while having been boot from slot A, then wiping data while in slot A results in data loss. By extension, rebooting into slot B and then wiping data allows slot B to now hold the encryption key. I'm sure this theory has got some errors, but it's the best I can come up with having no intrinsic knowledge on the topic.
2. Are there any means of mitigating data loss should the phone become encrypted? I.e. If possible, can I back up data (minus /data/media) and then restore that when I can't get access to /data/media?
With regards to question #1, I developed my "suspicion" after lossing ambition to test it. When I get my ambition back to fight this issue, I'll try again. I'm just getting sick of transfering 25+ gigs of data via adb every time the data encryption kicks in.
Click to expand...
Click to collapse
You're not that far off, actually. And while I'm no developer I suspect that Encryption kicks in when
a). You flash stock OOS. No matter what ROM you are on, when you flash OOS it's possible you can get encrypted. I'm not sure about this but if a developer could confirm that'd be great. This one time, I flashed OOS Stable while on Beta and it Encrypted my Storage. So I had to retransfer with a computer to flash it the required two times. So basically avoid flashing OOS when on a Custom ROM. Even when switching ROMs.
b). Just as you said, when you Wipe Data within TWRP and then Reboot to TWRP it also Encrypts the Device. So I usually Wipe Data after flashing ROM & Gapps. Otherwise if you Wipe Data after flashing ROM it will Encrypt you.
And to answer that last Question the app I personally use is called Swift Backup. It's an amazing app and although it costs $5.49 it can Backup Apps and Data. It can also backup the Files in Android/obb. Give it a go.
Mannan Qamar said:
You're not that far off, actually. And while I'm no developer I suspect that Encryption kicks in when
a). You flash stock OOS. No matter what ROM you are on, when you flash OOS it's possible you can get encrypted. I'm not sure about this but if a developer could confirm that'd be great. This one time, I flashed OOS Stable while on Beta and it Encrypted my Storage. So I had to retransfer with a computer to flash it the required two times. So basically avoid flashing OOS when on a Custom ROM. Even when switching ROMs.
Click to expand...
Click to collapse
I've been fiddling around with OOS and The Pixel Experience (aka TPE) ROM. I've yet to need to flash OOS in order to loose my ability to decrypt. Flashing TPE screws everything up quite nicely as well. That said, I have gotten into the situation where TWRP (booted from either slot) has got everything encrypted. However, in one case, I was able to get the data back by recreating the boot_a partition as it existed before I wiped data. I think there may be something to be learned here. However, subsequent attempts to use this method have not been successful. In other words, I'm not sure what I actually learned.
Mannan Qamar said:
And to answer that last Question the app I personally use is called Swift Backup. It's an amazing app and although it costs $5.49 it can Backup Apps and Data. It can also backup the Files in Android/obb. Give it a go.
Click to expand...
Click to collapse
I'm still using Titanium Backup (paid version as well). It works quite well and I'm happy with it. That said, it's still a much bigger pain in the butt to restore vs performing a nandroid restore of the data. It's apples and oranges though. In order for the nandroid to provide any real value, you pretty much have to do right before need it... unless you never do anything on your phone. It also only works with the ROM from which it was created... obviously. Since my current nandroid backup of /data is > 22 gb, its fairly cumbersome.
notorious.dds said:
I've been fiddling around with OOS and The Pixel Experience (aka TPE) ROM. I've yet to need to flash OOS in order to loose my ability to decrypt. Flashing TPE screws everything up quite nicely as well. That said, I have gotten into the situation where TWRP (booted from either slot) has got everything encrypted. However, in one case, I was able to get the data back by recreating the boot_a partition as it existed before I wiped data. I think there may be something to be learned here. However, subsequent attempts to use this method have not been successful. In other words, I'm not sure what I actually learned.
I'm still using Titanium Backup (paid version as well). It works quite well and I'm happy with it. That said, it's still a much bigger pain in the butt to restore vs performing a nandroid restore of the data. It's apples and oranges though. In order for the nandroid to provide any real value, you pretty much have to do right before need it... unless you never do anything on your phone. It also only works with the ROM from which it was created... obviously. Since my current nandroid backup of /data is > 22 gb, its fairly cumbersome.
Click to expand...
Click to collapse
I dunno if it will work but when you get Encrypted try booting the TWRP image. Maybe that'll work.
Doesn't this problem occur with backups and restore from twrp as well?.... This A/B stuff I'm not used to but I'll keep reading and hopefully something in my brain will kick in lol...
Mannan Qamar said:
I dunno if it will work but when you get Encrypted try booting the TWRP image. Maybe that'll work.
Click to expand...
Click to collapse
Yeah, that I defintitely tried. No dice. However, I just backed up everthing and I'm about to start blowing the thing up with ROM flashes. Consider it a stress test. I'll report back.
What I've got so far...
Coming from OOS 9.0.14 running on slot B with a lock screen pattern enabled, I boot into TWRP on slot B.
I then flashed The Pixel Experiance ROM via it's .zip file. (The flash is then applied to slot A because it goes to the inactive slot).
Flashed the TWRP install .zip
Changed active slot to A
Reboot to recovery (aka TWRP) ... now in slot A.
wiped data (minus storage)
Flashed magisk
Reboot system
This got me into the new ROM with data intact. However, when rebooting to recovery (still slot A), it would ask for a pattern but yet wouldn't accept the pattern to decrypt. Rebooting back into Pixel Experience the data was decrypted. So, even the data would decrypt when booted into system, I could no longer get to the data from within TWRP. I then changed the lock pattern from within Pixel Experience and reboot to TWRP, it still couldn't decrypt the data. Rebooting back to system succeeded in that it actually boot, but I could no longer unlock the phone (stuck on "phone is starting"). My presumption at this point was that Pixel Experience could no longer decrypt the data.
I then:
Reboot to TWRP (slot A still)
Flashed OOS
Flashed TWRP
Set active slot to B
Reboot to recovery (aka TWRP)
wiped data (minus storage)
reboot to system
At this point OOS failed to boot and I was returned to TWRP. Data was still not able to be decrypted. I then did a factory reset plus wiped storage (aka data, dalvik, and internal storage) and tried to boot to system... still failed and sent me back to TWRP. This time, although data was empty, it was decrypted. I tried to reboot system again. It failed again and sent me back to TWRP.
So, at this point , I've wiped data and internal storage but I cannot get stock OOS to boot. So, I reboot to bootloader and executed:
Code:
fastboot -w
My understanding is that this should do the same this as performing a factory reset from within TWRP. However, rebooting to system succeeded this time.
So, the new questions are:
1. How is it that I can decrypt data when booted into Pixel Experience on slot A, but I cannot decrypt the data via TWRP?
2. If I removed the lock screen pattern from OOS before flashing PixelExperience, would I have been able to decrypt the data in both the ROM and within TWRP?
3. Why is factory resetting via fastboot effective when doing so in TWRP is not?
notorious.dds said:
What I've got so far...
Coming from OOS 9.0.14 running on slot B with a lock screen pattern enabled, I boot into TWRP on slot B.
I then flashed The Pixel Experiance ROM via it's .zip file. (The flash is then applied to slot A because it goes to the inactive slot).
Flashed the TWRP install .zip
Changed active slot to A
Reboot to recovery (aka TWRP) ... now in slot A.
wiped data (minus storage)
Flashed magisk
Reboot system
This got me into the new ROM with data intact. However, when rebooting to recovery (still slot A), it would ask for a pattern but yet wouldn't accept the pattern to decrypt. Rebooting back into Pixel Experience the data was decrypted. So, even the data would decrypt when booted into system, I could no longer get to the data from within TWRP. I then changed the lock pattern from within Pixel Experience and reboot to TWRP, it still couldn't decrypt the data. Rebooting back to system succeeded in that it actually boot, but I could no longer unlock the phone (stuck on "phone is starting"). My presumption at this point was that Pixel Experience could no longer decrypt the data.
I then:
Reboot to TWRP (slot A still)
Flashed OOS
Flashed TWRP
Set active slot to B
Reboot to recovery (aka TWRP)
wiped data (minus storage)
reboot to system
At this point OOS failed to boot and I was returned to TWRP. Data was still not able to be decrypted. I then did a factory reset plus wiped storage (aka data, dalvik, and internal storage) and tried to boot to system... still failed and sent me back to TWRP. This time, although data was empty, it was decrypted. I tried to reboot system again. It failed again and sent me back to TWRP.
So, at this point , I've wiped data and internal storage but I cannot get stock OOS to boot. So, I reboot to bootloader and executed:
My understanding is that this should do the same this as performing a factory reset from within TWRP. However, rebooting to system succeeded this time.
So, the new questions are:
1. How is it that I can decrypt data when booted into Pixel Experience on slot A, but I cannot decrypt the data via TWRP?
2. If I removed the lock screen pattern from OOS before flashing PixelExperience, would I have been able to decrypt the data in both the ROM and within TWRP?
3. Why is factory resetting via fastboot effective when doing so in TWRP is not?
Click to expand...
Click to collapse
Well starting from the way you flashed the ROM, the rule of thumb is that you NEVER manually change slots. Now since you are on stock follow the instructions I posted earlier to flash PE or any other ROM for that matter. I think when you manually set the slot it somehow messed up Decryption. Next, after flashing OOS from TWRP when you are on a Custom ROM, you must always Format Data. The command you ran via Fastboot (fastboot -w) does just that.
So I just flashed Bootleggers from Stock OpenBeta 11. These are the steps I followed. I was successfully able to flash and was able to keep my Data intact. These are the steps I followed.
Starting from OpenBeta 11 I flashed ROM (Bootleggers) and then TWRP Installer. Then go to Reboot and Select Recovery. Once in Recovery, again flash ROM and TWRP Installer. Once done, reboot to Recovery. Flash Gapps and then go to Wipe and do a Swipe to Fa Tory Reset. This will Delete all your Data except Internal Storage. This is a necessary step when flashing a ROM. Once done, reboot to System. After this I was able to boot up Successfully with my Internal Storage as it was before flashing. After that I restored my backup. Everything is working and I can enter and Decrypt TWRP without error.
This thread should be pined as a guide because instalation notes in ROM threads are so basic.
A couple of things come to mind reading this thread in reference to encryption
1) if security patches dont match on A/B, it seems to trigger a lockout with encryption. i may be wrong.
2) if internal storage isnt wiped, i.e.-if you use the "factory reset' option in twrp, your data is still there and that in itself post-flash can trigger encryption error as the data is still there.
I think about it like this, despite it being A/B partitions, the data is like a middle layer that isnt individualized to one partition or the other. so a trigger/failure for secure boot encrypts it all.
kitcostantino said:
A couple of things come to mind reading this thread in reference to encryption
1) if security patches dont match on A/B, it seems to trigger a lockout with encryption. i may be wrong.
2) if internal storage isnt wiped, i.e.-if you use the "factory reset' option in twrp, your data is still there and that in itself post-flash can trigger encryption error as the data is still there.
I think about it like this, despite it being A/B partitions, the data is like a middle layer that isnt individualized to one partition or the other. so a trigger/failure for secure boot encrypts it all.
Click to expand...
Click to collapse
I'm pretty sure, that if you flash anything with a security patch earlier than the one you're currently using your data will get encrypted.
Which is why it happens with going back to OOS from custom, because they're always late with security patches compared to custom roms.
The hardest thing for.me coming from an A only device (Axon 7) has been learning order of operations. as long as one flashes rom followed by twrp and then a reboot into recovery, followed by installing magisk, things usually go okay. Going from aosp to aosp went okay, but like you said moving from OOS to AOSP or vice versa always yielded encryption lock. maybe we could make a merged security patch or something of the sort to bridge the gap. im no dev, so im sure someone who knows more than i can tell us why that wouldnt work. it would be really cool for One Plus to gain a better foothold in custom OS before the majority of crack flashers and devs swear off. Dont get me wrong, OOS is amazing and i feel with the inherent features, is superior to any other stock rom, but android is all about choice.
i really and truly wish someone would make a version of TWRP that had a dual boot set up vs A/B. I have had devices (looking at you, Droid Bionic) that never had proper root/bl unlock and had amazing rom communities bc of safestrap/dual boot/etc. i am more than willing to give up internal storage space to duplicate/clone /data and anything else that is on both systems. i also wish recovery had its own partition again, but that one is beyond our control at this point as it resides in boot now.
Maybe its conceivable. Who knows.
I have no issues. I don't lose anything when I flash ROMs. I boot to twrp, factory reset(not wipe storage), flash ROM, flash twrp installer....boot ROM, reboot twrp, flash gapps, custom kernel. Then I factory reset again (not wipe storage) and then install magisk..done....no issues. It will fail boot once and then boot fine because of this process but only after you do this. So if you reboot later you are fine...I keep all my stuff
First off, I want to thank all of you who contributed to this thread. I'm defintely gaining a better understanding of some of the pitfalls associated with A/B devices and encryption. Thanks!
Mannan Qamar said:
Well starting from the way you flashed the ROM, the rule of thumb is that you NEVER manually change slots. Now since you are on stock follow the instructions I posted earlier to flash PE or any other ROM for that matter. I think when you manually set the slot it somehow messed up Decryption.
Click to expand...
Click to collapse
So, my understand is that flashing a new ROM from within TWRP flashes it to the inactive slot. Therefore, my assumptions as to the reasoning behind rebooting from TWRP back into TWRP before wiping data were that:
Any modifiations made to the boot partition intended to affect the new ROM need to be made to the boot partition that shares the same slot as that of the new ROM, and
Wiping data while booted into image of TWRP which shares the same slot as the new ROM has some magical effect on preserving the ability to decrypt data vs wiping data while booted into the image of TWRP that resides in the slot of the ROM to be replaced.
It is these assumptions (combined with my execution of the basic recipe failing to prevent encryption lock-out) which led me to manually changing slots. I will say this... after flashing PE and TWRP.zip from within TWRP on slot B, simply rebooting to recovery brought me right back to TWRP on slot B. If PE is now on slot A, how does installing magisk, etc. do me any good while in slot B? Also, are my assumptions misguided as to the "why" rebooting to TWRP before installing magisk, wiping data, etc is necessary?
Mannan Qamar said:
Next, after flashing OOS from TWRP when you are on a Custom ROM, you must always Format Data. The command you ran via Fastboot (fastboot -w) does just that.
Click to expand...
Click to collapse
Lightbulb status: on
Thanks!
kitcostantino said:
If security patches dont match on A/B, it seems to trigger a lockout with encryption. i may be wrong.
Click to expand...
Click to collapse
Is this why in Mannan Qamar's earlier post he appears to be flashing the new ROM to BOTH slots before trying to boot into system?
ebproject said:
I'm pretty sure, that if you flash anything with a security patch earlier than the one you're currently using your data will get encrypted.
Which is why it happens with going back to OOS from custom, because they're always late with security patches compared to custom roms.
Click to expand...
Click to collapse
I'm assuming that flashing OOS to BOTH slots as is mentioned earlier with regards to flashing a custom ROM won't help when going back to OOS given the old vs new issue. Has anyone verified that yet?
It's my understanding that the sure security patch is applied to the system partition, correct? Is part of that patch included in boot, or no?
jamescable said:
I have no issues. I don't lose anything when I flash ROMs. I boot to twrp, factory reset(not wipe storage), flash ROM, flash twrp installer....boot ROM, reboot twrp, flash gapps, custom kernel. Then I factory reset again (not wipe storage) and then install magisk..done....no issues. It will fail boot once and then boot fine because of this process but only after you do this. So if you reboot later you are fine...I keep all my stuff
Click to expand...
Click to collapse
I notice that the FIRST thing you do is "factory reset". That's definitely not standard with the install threads I've read. Hmmmmm, interesting.
Also, why do you boot the ROM before flashing gapps, and kernel? It seems unnecessary since you're just factory resetting again. I'm sure I'm missing something on this one.
notorious.dds said:
I notice that the FIRST thing you do is "factory reset". That's definitely not standard with the install threads I've read. Hmmmmm, interesting.
Also, why do you boot the ROM before flashing gapps, and kernel? It seems unnecessary since you're just factory resetting again. I'm sure I'm missing something on this one.
Click to expand...
Click to collapse
Booting to ROM solved the encryption issues
idkwhothatis123 said:
Yes. For the love of god. Someone please clear up how we can flash on the go. I don't always have access to a computer with Adb/fastboot.
Every time I try to switch roms, upon rebooting to TWRP, my folders encrypt. Then I have to format data and voila, no fricking ROM to flash and I'm stuck
Click to expand...
Click to collapse
If you stuck on encrypted storage ever, reboot to system and after you see the setup screen, reboot to recovery again. Voila, your storage is decrypted now.
It happened to me all the time when I flash OOS and this way I am able to decrypt my internal storage.
im having big problems about vendor. for start im giving some info:
device: mi a1 (tissot)
current os: lineage OS 17.1
root: yes
twrp: can install or use just booting .img
i unlocked my device and installed twrp. there is no problem.
i wanted flash lineage OS and i wiped my device. gives error about cannot mount /vendor
i installed treble supported twrp and installed lineage OS. flashed magisk. installed microg...
then i tried flash mapsv1.zip which is recommended for microg. then booom. another /vendor error.
now i can boot device. i can use everything except gps. google maps app cannot found location. yandex maps can found and i can use it until lock screen or going main screen (or another app). then it starts stopping everytime until i clen its data and cache. then again... in chrome when i open google maps and try found my location chrome stops.
i tried to change /vendor/etc/gps.conf. its still same.
what to do now guys? im worrying about if i try re-flash rom it doesnt flash and device bricked. any solution without re-flash rom? what causes to cannot mount /vendor after solved it?
What exactly did you wipe? I think you wiped vendor, or bumped your O.S. from an old firmware. However, wiping system, data and Dalvik was more than enough.
To solve this, the worst thing to do is trying to hook around. Just reflash the latest original firmware and start again.
Keep in mind that you might need to backup your stuff first.
Use adb pull and push commands in case your device is rebooting too much. Check if device works well this time.
Next, open adb access from device and reboot fastboot to reflash your custom recovery, then reboot recovery and wipe just these items. Finally, complete Rom flashing procedure, depending of your needs.
KaaMyA said:
What exactly did you wipe? I think you wiped vendor, or bumped your O.S. from an old firmware. However, wiping system, data and Dalvik was more than enough.
To solve this, the worst thing to do is trying to hook around. Just reflash the latest original firmware and start again.
Keep in mind that you might need to backup your stuff first.
Use adb pull and push commands in case your device is rebooting too much. Check if device works well this time.
Next, open adb access from device and reboot fastboot to reflash your custom recovery, then reboot recovery and wipe just these items. Finally, complete Rom flashing procedure, depending of your needs.
Click to expand...
Click to collapse
Dalvik cache , system, data, and cache. My device is not rebooting too much. Sory if i couldn't explain. Everything working fine except when an app tries use my location, app stops running, i cant flash anything right now.
İ thought anyone knows mapsv1.zip file(microg.org) and which files are replaced or added by this file when flash it. And can i do it manually? Btw i can read and write /vendor file with solid explorer
İf needed to re-flash rom thats ok but i think lineage OS was perfect for me until this error. And a last thing: can i backup my settings. (İ already took backup of everything in stock when unlocked bl)
Thank you for help
Edit: gps problems started when i tried flash mapsv1
ROM could be perfect, but what I doubt is how perfectly you followed the procedure. Again, better start from zero, being sure you have all the prerequisites (latest firmware included). My humble opinion.
KaaMyA said:
ROM could be perfect, but what I doubt is how perfectly you followed the procedure. Again, better start from zero, being sure you have all the prerequisites (latest firmware included). My humble opinion.
Click to expand...
Click to collapse
Okey ilk try it and share the result night. But is it possible to backup settings of phone?
Well, that's why in step 0 is always recommended to backup you phone. At this level you should have nothing in settings, since you wipe it all... However, that's better, that's the goal of a Clean Install after all. Each ROM has its own flavour and is not recomendable to overwrite these values from a backup, if you're changing ROMs. What you could do, was to backup your apps and some settings with a third app like Swift Backup, or older Titanium Backup, before starting it all, or else, making a complete backup from recovery, in case you end with a problem with newly installed ROM (recommendation here is disable any screen security lock before doing Backups).
KaaMyA said:
Well, that's why in step 0 is always recommended to backup you phone. At this level you should have nothing in settings, since you wipe it all... However, that's better, that's the goal of a Clean Install after all. Each ROM has its own flavour and is not recomendable to overwrite these values from a backup, if you're changing ROMs. What you could do, was to backup your apps and some settings with a third app like Swift Backup, or older Titanium Backup, before starting it all, or else, making a complete backup from recovery, in case you end with a problem with newly installed ROM (recommendation here is disable any screen security lock before doing Backups).
Click to expand...
Click to collapse
İ did it all. Step by step. But i realized something. That errors doesnt matter on my device. Bcs when i flashing stock mi flash tool said failed but i booted system and everything working fine. İ installed persistent twrp. Same error. Then wiped. Same error but wipe completed. Than i flashed this zips single and booted everytime: lineage os, magisk, backup of migrate. Everytime it said cannot mount vendor but all of this apps and os and recovery working fine
Thank you for your helps
[Helping alone ]
Nurullah44 said:
İ did it all. Step by step. But i realized something. That errors doesnt matter on my device. Bcs when i flashing stock mi flash tool said failed but i booted system and everything working fine. İ installed persistent twrp. Same error. Then wiped. Same error but wipe completed. Than i flashed this zips single and booted everytime: lineage os, magisk, backup of migrate. Everytime it said cannot mount vendor but all of this apps and os and recovery working fine
Thank you for your helps
[Helping alone ]
Click to expand...
Click to collapse
if you didn't treblized your device then its not a problem. I have this error too but that's because there is no vendor partition to mount. as been said by unipo:
https://forum.xda-developers.com/mi...-3-3-1-0-tissot-manager-t3976117/post81326153
portox said:
if you didn't treblized your device then its not a problem. I have this error too but that's because there is no vendor partition to mount. as been said by unipo:
https://forum.xda-developers.com/mi...-3-3-1-0-tissot-manager-t3976117/post81326153
Click to expand...
Click to collapse
Are you sure? Bcs i can view and change /vendor in root path. Treblizing is updating and repairing system partitions right? İ am using treble support twrp, flashed stock rom via mi flash(said error but worked fine) then how to treblize a device? And is this required for anything(like a rom, an app)?