Stuck at Tap & Go Screen after Lineage install - ONE General

Hi all,
I have installed Lineage experimental build to my oneplus one today, rom installed successfully but now it is stuck at Tap & Go screen after first boot. Tell me what to do now as not able to connect to PC also.

besourabh said:
Hi all,
I have installed Lineage experimental build to my oneplus one today, rom installed successfully but now it is stuck at Tap & Go screen after first boot. Tell me what to do now as not able to connect to PC also.
Click to expand...
Click to collapse
Have boot into recovery and flash other rom. Can anyone tell which one i should install experimental or nightly build?

It's a known issue. Flash only the ROM first and reboot, setup the device. After that go back into recovery and flash GAPPS, it should work fine after that.

gr8guzzler said:
It's a known issue. Flash only the ROM first and reboot, setup the device. After that go back into recovery and flash GAPPS, it should work fine after that.
Click to expand...
Click to collapse
I confirm that this works, it's some sort of problem with LineageOS setup package I think (maybe conflicts with google).

besourabh said:
Have boot into recovery and flash other rom. Can anyone tell which one i should install experimental or nightly build?
Click to expand...
Click to collapse
I flashed experimental first,rebooted after rom installed and then flashed nightly and gapps and SU for root.

Problem with new gapps can't skip tap & go
After flash rom flash this old gapps
Micro
PHP:
https://github.com/opengapps/arm/releases/download/20161214/open_gapps-arm-7.1-micro-20161214.zip
Or nano
PHP:
https://github.com/opengapps/arm/releases/download/20161214/open_gapps-arm-7.1-nano-20161214.zip

Flash a GAPP build older than 20170115.
It is caused by the new version of Play Services.
Old releases could be found here:
Arm: https://github.com/opengapps/arm/releases/
Arm64: https://github.com/opengapps/arm64/releases/
X86: https://github.com/opengapps/x86/releases/
X86_64: https://github.com/opengapps/x86_64/releases/
Sent from my OnePlus One using XDA Labs

Related

GAPPS crash with crdroid Rom, how to install ?

Hello,
I am new on this forum but I used different roms (Omega rom) on my phone, a samsung S4 I9505.
As the last version of Omega Rom didn't work on my phone (boot couldn't succeed), i Installed CrDroid jfltexx 5.1.1
(http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844)
I want to have some of the Google Apps like the Play Store... so i downloaded on OpenGapps the package ARM / 5.1 / Mini. Yet after I installed it in the recovery mode, and i booted. As i was configuring the phone, the Google apps were crashing as i followed the instructions...
Now i i did another complete install of the phone WITHOUT the GAPPS. How should i proceed to get at minimum the Play Store ?
Thanks !
First time installing crDroid to your i9505, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Wipe system,dalvik,data and cache
- Flash crDroid zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET
- Reboot
Click to expand...
Click to collapse
[ROM][Official **crDroid**][][Marshmallow - 6.0.1][CM13-based][14/12]
Leonard26000 said:
Hello,
I am new on this forum but I used different roms (Omega rom) on my phone, a samsung S4 I9505.
As the last version of Omega Rom didn't work on my phone (boot couldn't succeed), i Installed CrDroid jfltexx 5.1.1
(http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844)
I want to have some of the Google Apps like the Play Store... so i downloaded on OpenGapps the package ARM / 5.1 / Mini. Yet after I installed it in the recovery mode, and i booted. As i was configuring the phone, the Google apps were crashing as i followed the instructions...
Now i i did another complete install of the phone WITHOUT the GAPPS. How should i proceed to get at minimum the Play Store ?
Thanks !
[ROM][Official **crDroid**][][Marshmallow - 6.0.1][CM13-based][14/12]
Click to expand...
Click to collapse
Lately Opengapps is giving me lots of trouble. Try using a different gapps package
For example:
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Thank you.
Do you have a version for android 5.1.1 ?
To install it, i boot in recovery mode and install it ?
maybe try with another gappsy version
ter4bite said:
maybe try with another gappsy version
Click to expand...
Click to collapse
Thank you for you proposition.
Finally, I used the 6.0 rom and Gapps are running fine.
Yet, MMS/SMS don't work... Should I change the bootloader and modem ? I use SM_Modem_XXUHOB8_and_LTE_Modem_XXUHOB8 and BL_I9505XXUHOB8_user_low_ship_MULTI_CERT
Cheets

VertexOS 1.9 [UNOFFICIAL][2017/2/11] [KIPPER] [AOSP+LOS]

HI ALL! With new Rom
VertexOS aims to provide a simple but enhanced near-stock AOSP experience with carefully selected features and an emphasis on stability and smoothness.​
what doesn't work ?
everything is working perfectly.
Coming from another ROM, OR if a CLEAN FLASH is required
1) Download the Vertex... .zip file.
2) Download a 7.1 GApps package.
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Vertex... .zip file
6) Flash Nougat-compatible GApps : http://opengapps.org/ / ARM64,7.1,pico
7) Reboot
Download:https://www.androidfilehost.com/?fid=745425885120707303
enjoy!
Credits:
- LineageOS
- AOSPA
- Citrus-CAF
- DU
- PureNexus
- Zephyr-OS
IF YOU LIKE MY WORK PLEASE HIT THANKS .
-IMPORTANT- : To install this rom you must have installed TWRP-3.0.3.0 , download from here https://www.androidfilehost.com/?fid=529152257862697990
To easy install from TWRP recovery :
1- open "install" section.
2- SELECT "install img" in the bottom .
4- Chose the place of TWRP-3.0.3.0.
5- install as RECOVERY , then reboot to recovery.
XDA:DevDB Information
ROM [AOSP + LOS], ROM for the Wileyfox Storm
Contributors
PS-DEV
Source Code: https://github.com/VertexOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP + LOS
Version Information
Status: Stable
Created 2017-02-11
Last Updated 2017-02-20
Received
Received !
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.
Cannot inatall gapps (Wrong Architecture)
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.
I installed fine with the nano apps and 64 bit, no issues
miSAKe said:
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.
Click to expand...
Click to collapse
Check the first post . i have been edit.
Chron0s said:
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.
Click to expand...
Click to collapse
show your PM.
Chron0s said:
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.
Click to expand...
Click to collapse
NO NO
ARM64 ARMv8 .
ChuckeCheese said:
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck
Click to expand...
Click to collapse
1- check to wipe this partitions :
- SYSTEM
- CACHE
- Dalvick-cache.
- DATA
and dont forget to factory reset .
2- first install rom then Gapps. download from here http://bit.ly/2kQf3Le
PS-DEV said:
Check the first post . i have been edit.
Click to expand...
Click to collapse
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.
miSAKe said:
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.
Click to expand...
Click to collapse
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?
PS-DEV said:
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?
Click to expand...
Click to collapse
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.
miSAKe said:
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.
Click to expand...
Click to collapse
The phone boot to rom or not ??
PS-DEV said:
The phone boot to rom or not ??
Click to expand...
Click to collapse
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.
miSAKe said:
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.
Click to expand...
Click to collapse
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .
PS-DEV said:
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .
Click to expand...
Click to collapse
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.
miSAKe said:
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.
Click to expand...
Click to collapse
Stock firmware or what? ,, to install version 13 Bootloader , just install any nightly cm13 then back to recovery and install TWRP 3.0.3.0 ??.

*GUIDE* [Honor 8] Kali NetHunter Installation *UNOFFICIAL*

***WARNING***
This is NOT an official guide and I'm not affiliated with Offensive Security [ :crying: ].
This is just my personal guide.
I've been playing with this today and lot of my tries ended up with bricking my device.
Currently this method is working, but I am NOT responsible for any bricked devices.
If you never encountered/heard of bootloop/brick, please consider ignoring this tutorial.
DON'T FORGET TO MAKE A NANDROID BACKUP!!!
Hi guys! This is my quick-guide on how to install a Kali NetHunter on Huawei Honor 8.
It's quite simple, just read every step carefully.
This is just a guide. All credits goes to: CyanogenMod , TWRP, Offensive Security
So let's start!
*REQUIREMENTS*
- Rooted device
- Custom recovery TWRP/CWM
- A bit of patience
- Brain
You will need to flash a new recovery image through your old one .
So it's exactly very easy. I've already tested a lot of things and everything is working just fine.
So follow this steps:
1. Download CM 13 for Honor 8 and put it on your SD card. Link here.
2. Download this TWRP image for CM 13 / Honor 8 and put it on your SD card. Link here.
3. Download OpenGApps (Select arm64, 6.0, mini) and put in on your SD card. Link here.
4. Download Kali NetHunter (generic-arm64) and put in on your SD card. Full version: HERE. Minimal version: HERE. Just select the version you prefer. I'm using FULL, but I also tried minimal and it's working fine.
So after you downloaded all the files and you have it on your SD card:
1. Power off your Honor 8
2. When it's already off, press&hold Power and Volume Up button, until your device vibrates and the display starts up.
3. You should now be in your recovery. Press Install and select the TWRP recovery image, which you have downloaded on you SD card. Slide the panel to flash.
4. After you successfully flashed the image, head into main TWRP menu and select Reboot -> Recovery.
5. After you reboot into your recovery, choose cancel, if device ask for password key. If TWRP asks you if you want to allow write access to the system partition. IT IS VERY IMPORTANT THAT YOU ALLOW THIS. Check the box that says to never ask this question again.
6. Do a basic WIPE
7 . Flash the CM 13 then flash GApps
8. !IMPORTANT! Now reboot to your system and complete the basic "First-start" settings. Do NOT flash Kali NetHunter, if you haven't completed the first-time boot settings.
9. When you set up your phone and you are already on your Home Screen, power off your phone and boot to recovery again.
10. Now flash the Kali NetHunter, which you have downloaded on your SD card.
11. After the installation is complete, you can reboot to your system.
12. Press the power button on the Huawei Unlocked Bootloader warning screen. It will take a bit longer to boot than normal. It's completely fine. Just let it be for like 30 secs.
13. Now the Kali Bootanimation will start. Your phone will probably turn off during the bootanimation on your first boot. DON'T PANIC. It's fine. It will automatically restart and boot to your new system.
14. Now open up the NetHunter app. It will ask you for some permissions. It's important to ALLOW all the permissions.
15. After you allowed it all permissions, you can now close the NetHunter app and enjoy your Kali NetHunter
Sorry for my bad English
If you brick your phone, wipe your data and flash everything except the TWRP image again.
It's not my fault if you damage your phone by doing this. Remember that you are doing this on your own risk.
Have fun with your NetHunter on Honor 8
Screenshots:
http://imgur.com/a/8Wdyf
http://imgur.com/a/95dx0
http://imgur.com/a/YBxRS
http://imgur.com/a/E4gZ0
http://imgur.com/a/mkwet
will it works on stock rom??
Do I need to be on a specific build for this or does it not matter?
VenuGopalu said:
will it works on stock rom??
Click to expand...
Click to collapse
Unfortunately no. It requires some components from CyanogenMod.
FreeLineTM said:
Do I need to be on a specific build for this or does it not matter?
Click to expand...
Click to collapse
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.
Flexy' said:
Unfortunately no. It requires some components from CyanogenMod.
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.
Click to expand...
Click to collapse
I mean the EMUI stock build. I'm currently on FRD-L09C432B381
FreeLineTM said:
I mean the EMUI stock build. I'm currently on FRD-L09C432B381
Click to expand...
Click to collapse
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod
it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below
Flexy' said:
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod
Click to expand...
Click to collapse
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.
VenuGopalu said:
it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below
Click to expand...
Click to collapse
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
FreeLineTM said:
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.
Click to expand...
Click to collapse
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
It's not strange because I was on nougat with latest nougat TWRP when I tried the first time. But I rolled back to mm and completed the steps. However, the data partition was encrypted after rebooting to recovery with the new TWRP. I had to format data then reboot to recovery again. You should add this to the guide.
Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
I have tested on twrp-3.0.2-0-frd.img&twrp-3.1.1-0-frd.img both are working without any issue
link for twrp:::: https://dl.twrp.me/frd/
I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..
FreeLineTM said:
I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..
Click to expand...
Click to collapse
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?
darkrsing said:
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?
Click to expand...
Click to collapse
I don't think fingerprint worked if I recall correctly. I installed NetHunter as any custom ROM if I remember correctly.
I have installed it on Stock rom by using Magisk (and root of course). Very simple, very powerful.

PSA - DotOS 8.1 for Huawei Hi6250 devices works flawlessly

I was about to give up and go back to stock but lo and behold I got ahold of a link to a really nice GSI for our Honor 7x devices, and any other device with the Hi6250 chipset. It has worked flawlessly on my BND-L24 and doesn't give me weird uncertified device and internal storage errors like the treble GSI found in the treble ROM forums.
Download link (2nd time just in case) - https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-dotos-8-1-huawei-hi6250-t3793970
Open GApps (I use Pico) - https://opengapps.org
Treble GSIs (Why not) - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Latest Magisk (Beta for fixed bugs and whatnot) - https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Installation instructions -
crayonicle said:
I assume you have this TWRP installed, if not, install it: TWRP
Alright, let's install.
1. Boot into TWRP
2. Go to wipe - advanced wipe
3. Wipe all but SD card
3. Then go back to wipe.
4. There is an option next to advanced wipe, forgot what it was. (I think it was "Format Data")
5. Tap that option and type "yes"
6. Reboot back into TWRP
7. Flash the ROM and flash Open GApps right after flashing the ROM (I used Pico Open GApps)
8. Do a factory reset, wipe Cache, Dalvik / ART cache, and Data in advanced wipe just to be sure.
9. Reboot
Click to expand...
Click to collapse
EDIT: I'm no longer on this ROM so if there are bugs and you want me to reproduce them, I can not help you. Sorry, I need a more stable ROM for our Honor 7x's than this one. Thanks for understanding.
It's not the best idea to wipe with TWRP. It's better to do it with stock recovery or manually with fastboot.
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
flashing this i hope the battery sot is good
Thanks for pointing this Rom out crayonicle, just flashed it and it's freaking great!!
jmoss1972 said:
Thanks for pointing this Rom out crayonicle, just flashed it and it's freaking great!!
Click to expand...
Click to collapse
Well until i flashed magisk and now all i get after flashing the rom is stock recovery
imHadees said:
It's not the best idea to wipe with TWRP. It's better to do it with stock recovery or manually with fastboot.
Click to expand...
Click to collapse
Yeah, you're right, I could end up messing up partitions and whatnot...
But I'm known for being careless ¯\_(ツ)_/¯
DaRkLinK_35 said:
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
Click to expand...
Click to collapse
Yes, this ROM will run on your device!
Well, I didn't make this ROM at all, I'm just here to share it...
I already showed you the steps, read the original post!
You must be on EMUI 8 or you will brick your device!
jmoss1972 said:
Well until i flashed magisk and now all i get after flashing the rom is stock recovery
Click to expand...
Click to collapse
Did you flash the latest Magisk Beta?
Usually that is the one that works, or you can find a treble-compatible version of Magisk to flash.
crayonicle said:
Did you flash the latest Magisk Beta?
Usually that is the one that works, or you can find a treble-compatible version of Magisk to flash.
Click to expand...
Click to collapse
Yes I flashed the 16.4, not sure what happened. I can get into twrp, tried wiping and flashing the DotOs image again but all it does is boot into Huawei recovery. When I get home I will try downloading the stock firmware from the MT website and if I can get it to boot up Ill try flashing DotOs again.
jmoss1972 said:
Yes I flashed the 16.4, not sure what happened. I can get into twrp, tried wiping and flashing the DotOs image again but all it does is boot into Huawei recovery. When I get home I will try downloading the stock firmware from the MT website and if I can get it to boot up Ill try flashing DotOs again.
Click to expand...
Click to collapse
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
crayonicle said:
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
Click to expand...
Click to collapse
How's it compared to lineage 15.1? How's battery life? Post few screenshots and check whether substratum works or not? TIA
Tried flashing gapps linked and get an error about gapps isnt compatible. Tried flashing 8.0, 8.1 and 7.1.2 gapps and none work.
Hell yeah got the phone operational again, time to get back to flashing.
Username.php said:
How's it compared to lineage 15.1? How's battery life? Post few screenshots and check whether substratum works or not? TIA
Click to expand...
Click to collapse
More features than Lineage and the SOT seems to be higher
Substratum only works with Magisk or other root installed
Screenshots: Google Drive link
tlxxxsracer said:
Tried flashing gapps linked and get an error about gapps isnt compatible. Tried flashing 8.0, 8.1 and 7.1.2 gapps and none work.
Click to expand...
Click to collapse
Most likely there is something wrong with what you're using to flash the GApps, like the SD card, USB OTG, etc. Try switching it out.
But before doing all that, first flash the ROM, and then reboot again into TWRP and try flashing it if that makes a difference. Make sure you're flashing the ROM like the original post says.
crayonicle said:
Most likely there is something wrong with what you're using to flash the GApps, like the SD card, USB OTG, etc. Try switching it out.
But before doing all that, first flash the ROM, and then reboot again into TWRP and try flashing it if that makes a difference. Make sure you're flashing the ROM like the original post says.
Click to expand...
Click to collapse
Trust me, I am. ROM boots up fine though.
crayonicle said:
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
Click to expand...
Click to collapse
It was there all along, I'm a moron. It was in the settings menu.
crayonicle said:
I was about to give up and go back to stock but lo and behold I got ahold of a link to a really nice GSI for our Honor 7x devices, and any other device with the Hi6250 chipset. It has worked flawlessly on my BND-L24 and doesn't bootloop like the treble GSI found in the treble ROM forums.
Download link (2nd time just in case) - https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-dotos-8-1-huawei-hi6250-t3793970
Open GApps (I use Pico) - https://opengapps.org
Treble GSIs (Why not) - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Latest Magisk (Beta for fixed bugs and whatnot) - https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Installation instructions -
Click to expand...
Click to collapse
That's great! Definitely giving this one a try
I recommend it, working great for me as well.
Is it just me or does the inbuilt UI tweaker not work? I can change the accents but not the settings and quicksettings background

Ulitmate Q Rom A105XX

Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 A40 and A50 now Ultimate Q for A10
Rom Download https://www.androidfilehost.com/?fid=4349826312261802134
Ultimate Q download https://www.androidfilehost.com/?fid=4349826312261811703 this is latest
Telegram https://t.me/ultimate_Pie2
Stock kernel from firmeare
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Shomu11 said:
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Click to expand...
Click to collapse
Come to telegram can help better from there
we load gapps yes or not ?
findukv22 said:
we load gapps yes or not ?
Click to expand...
Click to collapse
No
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
How Long does the Rom take to boot up on the first boot?
Hi when does the rom boot into the OOBE setup
Betrayal92 said:
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
Click to expand...
Click to collapse
I would yes
EdwardTCM said:
Hi when does the rom boot into the OOBE setup
Click to expand...
Click to collapse
Come to telegram link is in post 1 can help better from there
Can you ppst the full instructions on how to install this please
I've successfully installed this on a Samsung Galaxy A10 model SM-A105F. Here's the simple explanation how I did it:
1. Used Freija to download stock firmware in case of brickada or loopery.
2. Unlocked bootloader.
3. Used Odin to flash the file vbmeta_disabled.tar to USERDATA to prevent Android Verified boot.
4. Installed custom recovery TWRP 3.4.
5. Wiped System, Data, Cache, Dalvik.
6. Installed Ultimate Q zip through recovery.
7. Installed Magisk Manager 20.4 zip through recovery.
8. Installed Samsung multidisabler through recovery.
9. Factory Reset wipe through recovery.
10. Reboot & enjoy.
Each of these steps are explained in detail elsewhere in guides, and if this is your first time it may seem complicated but this is more or less how it's done.
Thank for the rom..master, its great rom.
Some day, i want stock rom back but i dont have'nt keep it. And now i find in this thread..good job master
Hello, I am having some trouble finding the "allow usb debugging from this computer" pop-up. Could anyone please help me with it, i think the problem was related to the rom. Any help would be appreciated. Thanks.

Categories

Resources