cant install recovery or rom on yureka plus - YU Yureka Q&A, Help & Troubleshooting

i got yureka plus not rooted or anything ... so today i tried to root it n install custom revovery n rom ....
firstly tried yureka tool box app from here .. i unlocked bootloader but fone didnt restarted automaticaly n the software said waiting for device after everything but have to reboot manually ..
then i installed twrp recovery n again rebooted manually n closed software n restarted software again each time ....
then i tried to root but after that it got soft bricked ...
so then tried to get it back n finally got it back to life
then tried to unlock bootloader with same yureka tool box which did its job well
then i tried to install recovery with adb but it didnt installed n tried toolbox n adb many times but wasnt able to flash the recovery
then tried to install new rom with the official recovery but it failed also :/
help me
got the twrp recovery installed now with this link
https://forum.xda-developers.com/yureka/general/yureka-plus-rooted-t3173996
but now struck on bootloop
yu logo appears n stays for about 20 sec n again restart ... this is so annoying
been trying this from last 12 hrs
finally found out that its gapps thats causing bootloop ... any solution for this now ?? gapps i use were 7.1 pico but it said my rom is 5.1.1 whereas i got slim rom with android 7.1.1 from this link
https://forum.xda-developers.com/yureka/orig-development/rom-t3504303
used this rom also with gapps 6.0 nano but still bootloop
https://forum.xda-developers.com/yureka/orig-development/rom-t3365446

SunnyGrewal11 said:
i got yureka plus not rooted or anything ... so today i tried to root it n install custom revovery n rom ....
firstly tried yureka tool box app from here .. i unlocked bootloader but fone didnt restarted automaticaly n the software said waiting for device after everything but have to reboot manually ..
then i installed twrp recovery n again rebooted manually n closed software n restarted software again each time ....
then i tried to root but after that it got soft bricked ...
so then tried to get it back n finally got it back to life
then tried to unlock bootloader with same yureka tool box which did its job well
then i tried to install recovery with adb but it didnt installed n tried toolbox n adb many times but wasnt able to flash the recovery
then tried to install new rom with the official recovery but it failed also :/
help me
got the twrp recovery installed now with this link
https://forum.xda-developers.com/yureka/general/yureka-plus-rooted-t3173996
but now struck on bootloop
yu logo appears n stays for about 20 sec n again restart ... this is so annoying
been trying this from last 12 hrs
finally found out that its gapps thats causing bootloop ... any solution for this now ?? gapps i use were 7.1 pico but it said my rom is 5.1.1 whereas i got slim rom with android 7.1.1 from this link
https://forum.xda-developers.com/yureka/orig-development/rom-t3504303
used this rom also with gapps 6.0 nano but still bootloop
https://forum.xda-developers.com/yureka/orig-development/rom-t3365446
Click to expand...
Click to collapse
Okay, so i guess you followed a tutorial and it didn't work. Dont worry.
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/repository/platform-tools-latest-windows.zip
download recovery:- https://dl.twrp.me/tomato/
copy the recovery in the directory where you have extracted adb platform tools, and press shift+right click open command window here. and put your device into fastboot mode.
then type fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery name_of recovery.img
p.s do not use folder with space like "New folder" instead use "New_folder" in every directory. or else do it on your desktop and remove spaces if any on all folders.
if your device is bricked then first unbrick and follow this procedure.

Bhavesh_khatri said:
Okay, so i guess you followed a tutorial and it didn't work. Dont worry.
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/repository/platform-tools-latest-windows.zip
download recovery:- https://dl.twrp.me/tomato/
copy the recovery in the directory where you have extracted adb platform tools, and press shift+right click open command window here. and put your device into fastboot mode.
then type fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery name_of recovery.img
p.s do not use folder with space like "New folder" instead use "New_folder" in every directory. or else do it on your desktop and remove spaces if any on all folders.
if your device is bricked then first unbrick and follow this procedure.
Click to expand...
Click to collapse
thanks
prob was solved when i repaired my imei n then everything worked good but now m struck on one thing .. fone is running n everything is good but whenever i try to flash super user file then after that i get to rom booting logo but it never starts

SunnyGrewal11 said:
thanks
prob was solved when i repaired my imei n then everything worked good but now m struck on one thing .. fone is running n everything is good but whenever i try to flash super user file then after that i get to rom booting logo but it never starts
Click to expand...
Click to collapse
This is because you either using old recovery or old gapps or Su binary which is not compatible with your rom. which rom you are using? use Su 2.78 or su2.76 they are compatible with every rom, dont flash su in those roms who have already su.

Bhavesh_khatri said:
Okay, so i guess you followed a tutorial and it didn't work. Dont worry.
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/repository/platform-tools-latest-windows.zip
download recovery:- https://dl.twrp.me/tomato/
copy the recovery in the directory where you have extracted adb platform tools, and press shift+right click open command window here. and put your device into fastboot mode.
then type fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery name_of recovery.img
p.s do not use folder with space like "New folder" instead use "New_folder" in every directory. or else do it on your desktop and remove spaces if any on all folders.
if your device is bricked then first unbrick and follow this procedure.
Click to expand...
Click to collapse
i got su 2.46 .. and one more i tried from yureka toolbox ... and rom i have is slim rom .. also tried on lineage rom also

SunnyGrewal11 said:
i got su 2.46 .. and one more i tried from yureka toolbox ... and rom i have is slim rom .. also tried on lineage rom also
Click to expand...
Click to collapse
Don't try from toolbox, flash it from recovery. 2.46.
And lineage is not officially available fr tomato. Tho if you want to flash su on lineage its something different. Download root package they provide on their official website. Check it.

Bhavesh_khatri said:
Don't try from toolbox, flash it from recovery. 2.46.
And lineage is not officially available fr tomato. Tho if you want to flash su on lineage its something different. Download root package they provide on their official website. Check it.
Click to expand...
Click to collapse
thank u .. i will try it on saturday

Related

Flashing problem

Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
akshay114 said:
Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
Click to expand...
Click to collapse
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Hearty thanks for your reply ,cuz i spent more than 5 nights on this but couldnt make it ,now I got clarity about the problem I'll try to implement what you said but how can I update to 12.1 n after that how to root and install twrp or cwm and finally thanks thanks thanks a lot for ur reply
I tried with several KitKat roms
I also tried to install several ROMs, which are based on CM 11, but only 2/20 ROMs have worked.
Rest 18 are not working, and they get stuck up at the 2nd boot screen.
How can I resolve this problem?
loveboy_lion said:
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
loveboy_lion said:
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
Click to expand...
Click to collapse
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
akshay114 said:
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
Click to expand...
Click to collapse
you have to flash 64 bit recovery 32 bit wont work
http://forum.xda-developers.com/yur...recovery-twrp-2-8-4-0-touch-recovery-t3004699

Lava Pixel v1 no os installed in twrp

Hi,
i tried to flash the marshmallow update and accidently erased all the data using twrp. now my mobile is showing no os in twrp and it is not booting.
1. tried to unlock bootloader using fastboot. failed.
2. tried to flash custom rom . failed because bootloader not unlocked.
now i am having only twrp. can anyone help me in this , its really urgent.
thanks.
Do u have any custom rom for pixel v1?
i cant find any custom rom
hi i searched all over the internet but i cant find any custom rom. Can anyone pls give me the link for any custom rom for lava pixel v1.
Thanks
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
flashtool not detecting my mobile
AC DC said:
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
Click to expand...
Click to collapse
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
pmkscorpio said:
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
Click to expand...
Click to collapse
but if you have twrp you can directly install the zip from sdcard
thread link
AC DC said:
but if you have twrp you can directly install the zip from sdcard ,check this thread
Click to expand...
Click to collapse
where is the thread link?
pmkscorpio said:
where is the thread link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Issue
AC DC said:
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Click to expand...
Click to collapse
I used SP tool to flash the firmware (Link given by @AC_DC in another thread).
When I select the option 'firmware upgrade' it says error proinfo: Failed to get PMT info. The it says 'select option to format and download'. After doing that, after the 'download OK' popup, I try to boot up the phone and nothing. It isn't booting up. (white variant of pixel v1)
My phone is literally dead, only the preloader is working. I also tried formatting and then trying it again, but nothing works.
Please direct me to what I should do now. Any help highly appreciated :good:
First search in google unlock bootloader
Hello your problem is solve.....?
This method is legit and works 100%
Hey all
U said that u still have TWRP. So go to recovery, clear data, and in clear system partitions, select everything and clear.
Then follow the following steps -
1) Turn off yr V1 and get it into fastboot mode and connect it to yr PC( make sure u've adb installed. Link - https://androiddatahost.com/bnjkh)
2) download : https://firmwarefile.com/lava-pixel-v1. Place the 'boot' and 'system' files from the downloaded firmware to the folder where u have adb installed.
3) Open CMD( A .exe called 'cmd here' is already present in the file of adb, so run it as administrator)
4) Type -
Code:
fastboot flash boot boot.img
. Give it some time.
5) Type -
Code:
fastboot flash system system.img
. Give it time (It takes 4-5mins, so dont panic)
6) Type -
Code:
fastboot reboot
THIS METHOD WORKED FOR ME MANY TIMES.
If it helped you, click the :good: thanks button

[ROOT][MARSHMALLOW][HONOR 4C] Root, Recovery & Bootloader Unlock by HassanMirza01

DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it

Unable to go into fastboot mode

Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
bvsbrk said:
Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
Click to expand...
Click to collapse
Please let me know your current ROM and previous ROM.
Power+Vol down.
Get into bootloader mode by selection keys.
Then type fastboot boot recovery.img
Before this let me know your exact ROM version.
Hope this helps.
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
bvsbrk said:
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
Click to expand...
Click to collapse
1. Install Minimal ADB and Fastboot from following thread link
2. Download the recovery [SDK 22/23 (5.1.X/6.X)] TWRP 3.0.2.0 from following link Recovery for Lenovo A6000
3. Replace recovery.img of SDK 22/23 to minimal ADB and Fastboot installation folder
4. Now do the following steps & thanks to @Mr.AW
a. Enter to fastboot
b. Turn off your phone
c. Hold on the volume down key and hold on the power button
d. Wait until lenovo logo appears with small text "Powerkey long press can reboot phone" at the bottom of the screen
e. Connect your phone to your PC
f. Type "fastboot boot recovery.img" (without quotes). Wait until you land on TWRP recovery
I hope, now you can land into recovery mode.
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
bvsbrk said:
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
Click to expand...
Click to collapse
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
My phone lenovo A6000 didnt detect as qualcomm
bro it is showing wating for any device though I installed all the drivers
IbS285 said:
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
Click to expand...
Click to collapse
Try this it will work
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378
bvsbrk said:
Click to expand...
Click to collapse
Make sure if fastboot driver installed properly by "fastboot devices" command.
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
bvsbrk said:
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
Click to expand...
Click to collapse
Check out here:-http://forum.xda-developers.com/showthread.php?t=2277112
thanks bro
I am also having same problem...my current ROM is ressurection remix 7.1.2 and while I was flashing ROM and gapps....flashing of gapp failed now recovery mode is not opening
I Can't boot into recovery mode
in my lenovo a6000 mobile fastboot mode is not working
I have boot into recovery mode via PC But is nir working
plsssssssssssssss help me

Help!! plzz

Hi. I have got a problem. I currently have a lg nexus 4 . i accidently installed twrp in boot. so every time i open my phone twrp comes. and half of my touch screen does not work. so i can't fully swipe to install roms and cant type certain lettrs in keyboard in terminal and the bootloader is locked. so how do i get out of this . any help will be greatly appreciated . Thank you ..
098765 said:
Hi. I have got a problem. I currently have a lg nexus 4 . i accidently installed twrp in boot. so every time i open my phone twrp comes. and half of my touch screen does not work. so i can't fully swipe to install roms and cant type certain lettrs in keyboard in terminal and the bootloader is locked. so how do i get out of this . any help will be greatly appreciated . Thank you ..
Click to expand...
Click to collapse
Same with me...i am just gonna go and fix the display...
Hi,
Download the rom you previously had to your computer if you didn't have it, extract the zip, boot the phone into fastboot mode and connect it to your PC.
In the extracted zip, there should be a boot.img file. From a computer terminal where fastboot is present, do:
Code:
fastboot flash boot boot.img
The easiest is if you copy the boot.img file to the folder where fastboot.exe (if windows) resides and then run the command above.
Then reboot the phone again and it should boot just fine again.
chippey5 said:
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
But OP stated their bootloader was locked.
If TWRP is still also installed on your actual recovery partition (so that you can still boot it after the next step), you can just adb sideload <ROM.zip> while TWRP is booted and you are connected to a PC to reinstall a ROM along with it's boot partition.
Another thing you could do if you have the boot.img is to boot TWRP, copy the file to your phone and then on your PC run
adb shell dd of=/dev/block/bootdevice/by-name/boot if=/sdcard/boot.img
Good luck for everyone who still needed this after a year

Categories

Resources