In 7.0 stock the option to switch from 4g to 3g work perfectly, but in LineageOS 14.1 the option is available, clickable, but not working. How can I solve this problem?
Edson Luiz said:
In 7.0 stock the option to switch from 4g to 3g work perfectly, but in LineageOS 14.1 the option is available, clickable, but not working. How can I solve this problem?
Click to expand...
Click to collapse
Which rom exactly are you running? There are different LineageOS.
strongst said:
Which rom exactly are you running? There are different LineageOS.
Click to expand...
Click to collapse
I'm running [ROM][OFFICIAL][7.1.1][XT16xx]LineageOS 14.1[athene][Moto G4/Moto G4 Plus]
my firmware XT1640
Edson Luiz said:
I'm running [ROM][OFFICIAL][7.1.1][XT16xx]LineageOS 14.1[athene][Moto G4/Moto G4 Plus]
my firmware XT1640
Click to expand...
Click to collapse
And which version? The 20170123 official nightly? I'm on they mentioned nightly and switching works as expected.
Anyone??
I'm in 20170227 and I'm also not able to switch between 4G and 3G.
Where I live we have 4G networks but there's no data traffic, only in 3G.
2G switch's fine, but you can't really use it due to its very slowly speed.
Please help.
rafannibal said:
Anyone??
I'm in 20170227 and I'm also not able to switch between 4G and 3G.
Where I live we have 4G networks but there's no data traffic, only in 3G.
2G switch's fine, but you can't really use it due to its very slowly speed.
Please help.
Click to expand...
Click to collapse
I have a XT1625 and LTE, HSPA+, 2G, and EDGE all work fine. T-Mobile, tested on 0227 and 0306 build with both stock and ElementalX kernel.
There may be radio differences between the 1625 and 1640 but I can't be sure as to which bands may or may not be supported. When you installed LOS did you make sure to wipe Data/Cache/System/Dalvik? Make sure you don't overwrite existing ROMs without wiping first.
Well, I guess there are different radio frequencies, not sure, but I know that the XT1641 works in different bands than the indian model, so I guess is the same.
Anyway, I think I found a solution: in settings, you have to go to system perfis (sorry don't know how to translate it to english since I can't remember the equivalent, but is above the Google section) then you tap to edit the one you're using. There you have the option to select the favorite type of network, and you actually CAN switch perfectly to 3G, 4G or EDGE.
Can't imagine why it doesn't work in the "right" part of the settings but, you know, if it works it's good.
Related
Four things to note before proceeding...
1. This only works for users having vs985 model outside the US or not on verizon network.
2. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
3. May be you already know all the things in the post but it can be useful for beginners like me .
4. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
akki7636 said:
Three things to note before proceeding...
1. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
2. May be you already know all the things in the post but it can be useful for beginners like me .
3. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
Click to expand...
Click to collapse
Hi there, thanks for the info. What area are you in and where did you find what band you needed? I have tried numerous times with all the bootstacks and never had consistent 4G.
@mopartonyg
I'm in India and i just checked my career's website to know which band they are using. However in USA Verizon wireless uses Band12 as Primary Band and Band2 , Band4 as Secondary band to strengthen the signal in densely populated urban area. So if you are verizon user in USA band 12,4,2 must be activated. I can't say anything about consistency as it varies from place to place.
Actually Verizon uses band 13 for it's primary along with bands 4 and 2. Not having any luck getting data to work on Fulmics with this method. I select band 13 and band 4 (as band 2 is not in my area) yet even with that I still can't get data at all on Verizon with Fulmics.
same boat here... actually the only band I can get working is 4. I have to assume the design of the international rom with the band they are designed around, just don't play nice with our CDMA harware/modem partition. I would suspect that the international roms would require some engineering for them to really work properly. not sure if just porting them over and chaning settings is going to get the job done. perhaps someone more intelligent than I could share some light, but there certainly is a conflict with how these roms communicates across the CDMA bands in the US
Sent from my VS985 4G using XDA-Developers mobile app
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Oh... Glad to hear that buddy..
So i think my post is useful for only international users which are not on verizon wireless.
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
A couple of good approaches to the issue. Although it needs to be noted 4G is directly related to the band on each carrier (VZW, TMO, etc) See Below
Carrier 4G LTE Bands Frequencies
Verizon Wireless 2, 4, 13 1900, 1700 f, 700 c
T-Mobile 2, 4, 12 1900, 1700 def, 700 a
Sprint 25, 26, 41 1900 g, 850, 2500
Europe 3, 7, 20 1800, 2600, 800
If a specific ROM cannot be set to the correct bands above, it would make sense to me that Verizon wouldn't work in Europe on a stock VZW ROM. It would not be able to use the channels in Europe.
And vice versa, that Verizon wouldn't work in the states on an international ROM in the US. Whether the Verizon SIM is blocking that band, or the design of the ROM, would be a better question for the developers.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Warid's approved devices will definitely work with Warid's LTE network. For our "Warid LTE Approved' devices please visit the "Warid's LTE devices" section. You can also purchase LTE devices that support 1800 MHz (FDD-LTE Bands 3) from other sources. However, Warid doesn't take responsibility for these devices if they do not work on Warid's LTE network http://www.waridtel.com/lte/faqs
So it makes sense that if BAND 3 works international (see above) that you get 4G
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
AngryManMLS said:
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
Click to expand...
Click to collapse
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
akki7636 said:
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
Click to expand...
Click to collapse
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
+1
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
This is good to hear and I second that!
Looking forward to getting it fixed and use it as my daily driver. It would totally be worth a big donation, thanks to everyone working on making this available to so many.
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
b00ster23 said:
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
Click to expand...
Click to collapse
Cool buddy... I think our vs985 will be on 4g Speed very soon.
akki7636 said:
Cool buddy... I think our vs985 will be on 4g Speed very soon.
Click to expand...
Click to collapse
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 10b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 10b rom.
3. Wiped stock 10b and flashed the 10b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
netookska05 said:
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 12b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 12b rom.
3. Wiped stock 12b and flashed the 12b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
Click to expand...
Click to collapse
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
b00ster23 said:
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
Click to expand...
Click to collapse
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
netookska05 said:
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
Click to expand...
Click to collapse
So when you go into the About Phone>Network, does it say Verizon Wireless for the network?
hello all ,
I just ordered a g935v on ebay a few days ago , it's still on the way , while I am planning to use circket wireless(att mnvo) on it.
As a common sense , flashing to g935u seems like the best choice , until the nougat for g935v is released recently and g935u still on mm ....
so , my question is , will it work if I flash it to g935t ? Or any advice will be appreciated.
I am worrying about the LTE BAND 17.
thanks.
powerrc said:
hello all ,
I just ordered a g935v on ebay a few days ago , it's still on the way , while I am planning to use circket wireless(att mnvo) on it.
As a common sense , flashing to g935u seems like the best choice , until the nougat for g935v is released recently and g935u still on mm ....
so , my question is , will it work if I flash it to g935t ? Or any advice will be appreciated.
I am worrying about the LTE BAND 17.
thanks.
Click to expand...
Click to collapse
Bad news :As far as I know since cricket uses AT&T there will be incompatibility issues.
Using will my phone work it says that you will have no 2G support, 3G says it will work, but 4G says "Device is compatible with some of the network carriers frequencies. It may work."
However it is missing 2 bands that AT&T uses for high speed LTE so you will not get high speed LTE so you might not get anything faster than UMTS/3G.
zimgir124 said:
Bad news :As far as I know since cricket uses AT&T there will be incompatibility issues.
Using will my phone work it says that you will have no 2G support, 3G says it will work, but 4G says "Device is compatible with some of the network carriers frequencies. It may work."
However it is missing 2 bands that AT&T uses for high speed LTE so you will not get high speed LTE so you might not get anything faster than UMTS/3G.
Click to expand...
Click to collapse
thanks , looks like I will stick to 935u and waiting for 935u's nougat then...
powerrc said:
thanks , looks like I will stick to 935u and waiting for 935u's nougat then...
Click to expand...
Click to collapse
So you already have a 935u?
Why not just flash AT&T nougat on it until the u nougat cones out?
Someone correct me if I'm wrong but they should be able to do that, yeah?
zimgir124 said:
So you already have a 935u?
Why not just flash AT&T nougat on it until the u nougat cones out?
Someone correct me if I'm wrong but they should be able to do that, yeah?
Click to expand...
Click to collapse
yeah , I get my phone now , using att's rom on it , lte is working pretty well , just too many bloatwares making the phone slow as s*** , also att's rom doesn't allow me to do wifi tether, and battery runs out pretty quick...
I don't suggest to flash any provider rom on U model. You'll loose LTE-CA. You'll only have 1 channel LTE. If you want to use any carrier rom and have LTE-CA, get that carrier phone.
seemcity said:
I don't suggest to flash any provider rom on U model. You'll loose LTE-CA. You'll only have 1 channel LTE. If you want to use any carrier rom and have LTE-CA, get that carrier phone.
Click to expand...
Click to collapse
thanks for you info , but cricket limits the speed to be lower than 10mbps... so ..
anyway , I can reach the "full" speed with att or t-mobile's rom
XT1644
Currently running with:
TWRP 3.0.2-0-athene
Radio: athene_MPJ24.139-49_radio_M8952_70009.08.03.45R+FSG-8952-03.65
Resurrection Remix M 5.7.4 - 20161016
open-gapps 6.0 mini - 20170311
my order of events:
-get new (to me) phone
-unlocked bootloader
-flashed TWRP 3.0.2-0-athene
-never got root on stock because I went straight to Nougat
-flashed twrp-3.0.3-n4-athene_shreps
-flashed – lineage-14.1-20170306-nightly-athene-signed with open-gapps full
-couldn't get LTE and learned that I needed to flash a N firmware (which is the same as a N radio from what I understand?)
-flashed TWRP 3.0.2-0-athene
-flashed athene_NPJ25.93-14_radio_M8952_70030.25.03.62R+FSG-8952-05.30
-still couldn't get LTE to work
flashed up to my current set up and still can't get LTE to work.
I'm at a loss on what to do next.
I no longer have my stock nandroid (missed place it-possibly deleted accidently) thus I do not have what my build number would have been on stock.
I dont have a preference if I go back to Nougat or stay on MM (get to use xposed) I just want LTE to work.
What should I do next? Any help would be appreciated and thanks in advance!
legal.xchech said:
XT1644
Currently running with:
TWRP 3.0.2-0-athene
Radio: athene_MPJ24.139-49_radio_M8952_70009.08.03.45R+FSG-8952-03.65
Resurrection Remix M 5.7.4 - 20161016
open-gapps 6.0 mini - 20170311
my order of events:
-get new (to me) phone
-unlocked bootloader
-flashed TWRP 3.0.2-0-athene
-never got root on stock because I went straight to Nougat
-flashed twrp-3.0.3-n4-athene_shreps
-flashed – lineage-14.1-20170306-nightly-athene-signed with open-gapps full
-couldn't get LTE and learned that I needed to flash a N firmware (which is the same as a N radio from what I understand?)
-flashed TWRP 3.0.2-0-athene
-flashed athene_NPJ25.93-14_radio_M8952_70030.25.03.62R+FSG-8952-05.30
-still couldn't get LTE to work
flashed up to my current set up and still can't get LTE to work.
I'm at a loss on what to do next.
I no longer have my stock nandroid (missed place it-possibly deleted accidently) thus I do not have what my build number would have been on stock.
I dont have a preference if I go back to Nougat or stay on MM (get to use xposed) I just want LTE to work.
What should I do next? Any help would be appreciated and thanks in advance!
Click to expand...
Click to collapse
Strange, i have exact the same setup as you right now. M modem (or radio or baseband, it's the same) and as rom RR M. I have no problem at all.
legal.xchech said:
XT1644
Currently running with:
TWRP 3.0.2-0-athene
Radio: athene_MPJ24.139-49_radio_M8952_70009.08.03.45R+FSG-8952-03.65
Resurrection Remix M 5.7.4 - 20161016
open-gapps 6.0 mini - 20170311
well it would sound stupid but have you tried manually entering the APN? i have the same device with single sim. LTE works great
Click to expand...
Click to collapse
sublimeace said:
legal.xchech said:
XT1644
Currently running with:
TWRP 3.0.2-0-athene
Radio: athene_MPJ24.139-49_radio_M8952_70009.08.03.45R+FSG-8952-03.65
Resurrection Remix M 5.7.4 - 20161016
open-gapps 6.0 mini - 20170311
well it would sound stupid but have you tried manually entering the APN? i have the same device with single sim. LTE works great
Click to expand...
Click to collapse
What are your settings of you are on Verizon? If not where could I find them? I have 2 options for APNs which I am assuming is for the dual sim g4+. Which one would I pick for the single sim? Will it choose the APN I want every time?
Click to expand...
Click to collapse
legal.xchech said:
sublimeace said:
What are your settings of you are on Verizon? If not where could I find them? I have 2 options for APNs which I am assuming is for the dual sim g4+. Which one would I pick for the single sim? Will it choose the APN I want every time?
Click to expand...
Click to collapse
I am outside US mate, so i can't tell you that but maybe you can call Verizon and ask them if the issue is on there side? Did LTE work in stock 7.0 that you flashed? Are both your sims LTE? Pick the one which is In slot 1 as the slot 1 sim will support LTE. Have you checked your preferred sim for data connection? What is your preferred network settings?? Have you manually tried registering on your network in slot 1?
Click to expand...
Click to collapse
I compared my APN settings on my LG G2 and they are the same as in the G4+. Although I am unable to edit my settings in the G4+ like I am in the G2. Also, my G4+ only has one Sim slot but two APN options in settings.
Sent from my LG-VS980 using Tapatalk
I compared my APN settings on my LG G2 and they are the same as in the G4+. Although I am unable to edit my settings in the G4+ like I am in the G2. Also, my G4+ only has one Sim slot but two APN options in settings.
Sent from my LG-VS980 using Tapatalk
I went to Verizon to activate a new sim card with no luck. Still no LTE. I've tried different radios, different ROMs with no success.
What should I do at this point?
How do I completely start over from the way I got it?
Any help is appreciated. Thanks
Sent from my LG-VS980 using Tapatalk
Have you tried the hidden menu code: *#*#4636#*#* Open the dialer and enter that code, you will get a hidden menu called "Phone info". About half way down there is a drop down menu, change that setting to LTE only. See if your LTE works then. If it does, change it to LTE/CDMA auto (PRL) (This is assuming you are on Verizon or Sprint or another CDMA MVNO)
If your phone has only one sim slot it should be talking about settings for 2 sim. In the flashable zip thread you will find MPJ24.139-64. Afaik that is a US build only. Also the radio is different it seems (athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip) Maybe you can try the non-Amazon version? You said you are not in the US but it's a US model, right?
bovineyard said:
Have you tried the hidden menu code: *#*#4636#*#* Open the dialer and enter that code, you will get a hidden menu called "Phone info". About half way down there is a drop down menu, change that setting to LTE only. See if your LTE works then. If it does, change it to LTE/CDMA auto (PRL) (This is assuming you are on Verizon or Sprint or another CDMA MVNO)
Click to expand...
Click to collapse
Droidphilev said:
If your phone has only one sim slot it should be talking about settings for 2 sim. In the flashable zip thread you will find MPJ24.139-64. Afaik that is a US build only. Also the radio is different it seems (athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip) Maybe you can try the non-Amazon version? You said you are not in the US but it's a US model, right?
Click to expand...
Click to collapse
Thanks guys I figured it out(but not really). I started over from the beginning and redownloaded everything and tried again and it took this time. Not sure what I did differently but I have LTE now.
However I am now having a problem with accessing Dialer/calls/settings when trying to set up Google voice. Dialer app crashes and sim reboots. Ugh...
I'm in US with US phone on Verizon and one sim card slot.
I am in the US, mine is the xt1644, is model. The OP is having problems with LTE. I was having problems with LTE - CDMA.
Are you sure the radio you're referring to is a US radio?
---------- Post added at 06:06 PM ---------- Previous post was at 06:01 PM ----------
legal.xchech said:
Thanks guys I figured it out(but not really). I started over from the beginning and redownloaded everything and tried again and it took this time. Not sure what I did differently but I have LTE now.
However I am now having a problem with accessing Dialer/calls/settings when trying to set up Google voice. Dialer app crashes and sim reboots. Ugh...
I'm in US with US phone on Verizon and one sim card slot.
Click to expand...
Click to collapse
I am also having that problem with call settings. You just have to set up call forwarding no answer to go to your Google voice number. I know also the Lineage and or the latest jp25 radio thinks I have two sims.
bovineyard said:
I am in the US, mine is the xt1644, is model. The OP is having problems with LTE. I was having problems with LTE - CDMA.
Are you sure the radio you're referring to is a US radio?
---------- Post added at 06:06 PM ---------- Previous post was at 06:01 PM ----------
I am also having that problem with call settings. You just have to set up call forwarding no answer to go to your Google voice number. I know also the Lineage and or the latest jp25 radio thinks I have two sims.
Click to expand...
Click to collapse
Google voice is all set up as I've used it for years. I simply cannot get into the settings to change it over from provider to Google voice. Frustrating...
Not sure who your provider is, I think you said you're cdma. I think all cdma provider's use *71{plus your 10 digit google voice phone number} to forward voicemail to google voice.
Here is a link to Verizon's instructions.
I have never been able to set up google voicemail through call settings on any phone on verizon anyway, it just gives you a link to the instructions.
By setting it up with the above method, it will automatically forward all busy-missed calls to your Gvoice number. It will never go to voicemail in the first place.
bovineyard said:
I am in the US, mine is the xt1644, is model. The OP is having problems with LTE. I was having problems with LTE - CDMA.
Are you sure the radio you're referring to is a US radio?
Click to expand...
Click to collapse
I guess you are askimg me?
I do can tell you that EU went from .63 M to Nougat and that there never was a .64 here so i started asking people. From what they told .64 (and .64 amazon) are US builds. Still i cannot find any official info, sorry.
I am running Official Lineage for the Moto G4 plus , I currently have the latest radio (M8952_70030.25.03.62R8952-05.30.R), this must not be the right radio for the xt1644 (us) version on Verizon (cdma). It (or the rom) thinks I have 2 sims. The 1644 version has only one sim (a cdma/gsm,/lte, etc. ) radio.
The phone is sometimes flaky, sticking on cdma or LTE, have to go into the hidden menu (Phone info), to get it to switch sometimes.
Also Phone-settings-calls (phone.android.com) always force closes when trying to open that submenu.
Droidphilev said we may need to flash this radio: athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip
Does anyone have any experience with the xt1644 specifically? I know most of you are in Europe/asia and have GSM.
bovineyard said:
I am running Official Lineage for the Moto G4 plus , I currently have the latest radio (M8952_70030.25.03.62R8952-05.30.R), this must not be the right radio for the xt1644 (us) version on Verizon (cdma). It (or the rom) thinks I have 2 sims. The 1644 version has only one sim (a cdma/gsm,/lte, etc. ) radio.
The phone is sometimes flaky, sticking on cdma or LTE, have to go into the hidden menu (Phone info), to get it to switch sometimes.
Also Phone-settings-calls (phone.android.com) always force closes when trying to open that submenu.
Droidphilev said we may need to flash this radio: athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip
Does anyone have any experience with the xt1644 specifically? I know most of you are in Europe/asia and have GSM.
Click to expand...
Click to collapse
M8952_70030.25.03.60R ATHENE_RETUSA_CUST is what i have.
Build number
NPJ25.93-11
What carrier? Are you running Lineage or another custom rom, or Stock? Thanks.
bovineyard said:
What carrier? Are you running Lineage or another custom rom, or Stock? Thanks.
Click to expand...
Click to collapse
AT&T
ANDROID 7.0
athene_oem_user_7.0_NPJ25.93-11_12_release
bovineyard said:
I am running Official Lineage for the Moto G4 plus , I currently have the latest radio (M8952_70030.25.03.62R8952-05.30.R), this must not be the right radio for the xt1644 (us) version on Verizon (cdma). It (or the rom) thinks I have 2 sims. The 1644 version has only one sim (a cdma/gsm,/lte, etc. ) radio.
The phone is sometimes flaky, sticking on cdma or LTE, have to go into the hidden menu (Phone info), to get it to switch sometimes.
Also Phone-settings-calls (phone.android.com) always force closes when trying to open that submenu.
Droidphilev said we may need to flash this radio: athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip
Does anyone have any experience with the xt1644 specifically? I know most of you are in Europe/asia and have GSM.
Click to expand...
Click to collapse
Where can i down,oad "athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip" I current have the wrong radio for the same phone.
darkequitus said:
Where can i down,oad "athene_MPJ24.139-64_radio_M8952_70009.08.03.45R+FSG-8952-03.68.zip" I current have the wrong radio for the same phone.
Click to expand...
Click to collapse
Here is a link to all the radios
I lose LTE when I flash any of the zip file radios in twrp. I have to wipe, and reflash the stock Nougat rom through fastboot to get LTE back. Fortunately, I can restore my data backup through twrp and be back up running pretty quickly.
I have noticed that it thinks I have two sim slots, when I have only one. And when I try to open phone/settings/calls to set up voicemail, com.phone.android force closes, and sometimes it asks me to choose sim card 1 or 2.
bovineyard said:
I lose LTE when I flash any of the zip file radios in twrp. I have to wipe, and reflash the stock Nougat rom through fastboot to get LTE back. Fortunately, I can restore my data backup through twrp and be back up running pretty quickly.
I have noticed that it thinks I have two sim slots, when I have only one. And when I try to open phone/settings/calls to set up voicemail, com.phone.android force closes, and sometimes it asks me to choose sim card 1 or 2.
Click to expand...
Click to collapse
Hmm, wierd. Did you report this in the zip thread?
EDIT: sorry, you did.
Hello. I have unlocked Verizon V20 VS995 and I am in Europe. In the urban areas phone works fine with all frequencies, also 4G B3 and B20 frequency, but when I go just outside town it looses network. Any sugestions?
CDMA LGV20 will suffer with those issues in Europe. So just switching to a native LTE/GSM device is the only way...
But I can't understand why the sognal is so weak when phone supports all the frequencies in my country. I even changed antennas (plastic bumpers) but still the same result.
Simple explanation - it is not a HW issue - the root cause is combination of your modem firmware and stock ROM you are using as the LTE/GSM band usage is set to be with lower priority and the modem constantly searches for the CDMA signal firstly...
So, is there anything to fix this? Maybe flash another rom or modem, if I find somehow to root stock Oreo.
If you are in VS995 really (and please check the sticker indication under your battery for that it should state VS995 only without Sat the end) you can roll back to Nougat via kdz flash and unlock the bootloader via DirtySanta, flash custom recovery and flash afterwards AOSP/LOS based roms.
I think I have VS995 because before ota upgrade to Oreo I have installed few KDZ's from the link without any problem. Can you tell me how can I check ARB version of Oreo?
All Verizon ROMS including Oreo are ARB00
Also you might try flashing Oreo Alpha Omega Hybrid ROM firstly and if not happy than try RR roms...
Tried Alpha Omega ans Lineage 15.1 and the situation is the same. Poor signal strenght.
scytalemk said:
Tried Alpha Omega ans Lineage 15.1 and the situation is the same. Poor signal strenght.
Click to expand...
Click to collapse
Hi, did you find an answer? I have same problem... shame, lovely phone...
try use it without phone covers... it will get more bars lol