I searched but wasn't sure of the answer. I saw some say that the baseband on the 720 and 727 are the same. Will the 720 have band 12 working if I use in U.S.on T-Mobile? If not, is there a way to get it working?
I have now gone through every page of the question and answer section and have no answer. I'm now moving to the discussion section to research, but if anyone knows, please help.
You probably didn't look "every where".
X720 does not have support band 12
But there is a file you can flash to support band 12 on the x720
You have to flash the img file inside the zip file via fastboot (Assuming its unlocked)
Using the following command
Fastboot flash modem *insert zip file name here*.img
Insert the name the name of the image within the stars you see above and type .img at the end. Please dont include the *symbol when you type it out
Edit: Excuse my explanation its 2am
Edit 2: I'll upload my copy if the modem in a few minutes
---------- Post added at 11:13 AM ---------- Previous post was at 11:05 AM ----------
yebbey2 said:
I have now gone through every page of the question and answer section and have no answer. I'm now moving to the discussion section to research, but if anyone knows, please help.
Click to expand...
Click to collapse
Please note that it says 19's but users have reported that it will flash on mostly any rom you want it on.
Works best with stock rom
Good luck
Ps not responsible for anything.
Heres the link: https://www.dropbox.com/s/bznz2b7ygbl0gc8/modem-5.8.019s.zip?dl=0
Thank you. I looked at several threads.I didn't see anyone confirm that they were on 720 and band 12 working. I saw people with 727 flashing 720 roms and getting band 12.....but I probably missed it somewhere. Thanks, though
yebbey2 said:
Thank you. I looked at several threads.I didn't see anyone confirm that they were on 720 and band 12 working. I saw people with 727 flashing 720 roms and getting band 12.....but I probably missed it somewhere. Thanks, though
Click to expand...
Click to collapse
To be totally honest, in theory if the software is flashed correctly, you should get B12 connectivity. Same thing applies with the Galaxy s7 series. You can flash a Sprint variant to T-Mobile for full T-Mobile support, and then flash that to Verizon for full Verizon support. But the Sprint variant doesn't support Verizon's frequencies until you flash the verizon software. If the radio hardware is the same between devices, you should be able to flash a 727 ROM for T-Mobile support. I'd say give it a shot and let us know! :good:
I tried it on an x720 and it wouldn't see the sim. I had the cm13 teamsuperluminal rom on it.
I had to flash the stock rom to get it to read my sim again. Make a backup first and have a copy of the stock rom before you flash just in case.
one_self said:
I tried it on an x720 and it wouldn't see the sim. I had the cm13 teamsuperluminal rom on it.
I had to flash the stock rom to get it to read my sim again. Make a backup first and have a copy of the stock rom before you flash just in case.
Click to expand...
Click to collapse
Did you have multi-sim configuration set to dsds on Build.prop?
Ascertion said:
Did you have multi-sim configuration set to dsds on Build.prop?
Click to expand...
Click to collapse
Yes, it was. What should it be on instead?
one_self said:
Yes, it was. What should it be on instead?
Click to expand...
Click to collapse
Interesting. Not sure what happened there. From what you're saying it looks like the x727 can be spoofed as a x720 but not the other way around. It should be dsds for multi-sim so it should have worked.
Thanks for the info. It's all for naught now. I cancelled my order bc it was going to take a month bc of Chinese New year. I went with the honor 8 bc I wanted a smaller phone. I just hope Huawei will release the source code so I can have at least a fully functional CM
Related
EDIT:
I don't recommend anyone to flash this OTA, in fact I thing I'll shot it down
see post 69 in this same thread http://forum.xda-developers.com/showthread.php?p=57407812
Once again, Don't try it unless You know what are you doing, even when this is a pure unmodified OTA file, it semi-brickd my Moto X
OTA Just right now, android 5.0 lollipop 22.21.17.en.MX Im not in any soak list.
My device is a Moto X XT1097 Pure Edition
I haven't apply it becouse I'm not sure how to root it after the update.
And I'm asking, I'm not in a soak list, so this mean is the official release?
I'm just a user who got the OTA update, so use this at your own risk as I will not be able to help you.
https://mega.co.nz/#!kQRDRZbZ!vwFfubiUw7ZEJ_NfoWNhwwXdQpZyGc6rcqddF-lYq0E
Hello, im from Mexico too, do you have a xt1097 or is it other model?
lemmingMX said:
Hello, im from Mexico too, do you have a xt1097 or is it other model?
Click to expand...
Click to collapse
Yes, XT1097 pure edition
Can you please tell me whats your system version?
I also received the OTA, 1 hour ago.
Moto X from Motomaker.
What is the new android version 5.0 or 5.0.1?
Are you able to make a twrp back up and upload it? Will apreciatte it. Thanks!
Please somebody upload the zip, I'm on Nextel and I can't to keep waiting to feel some Lollipop love
I still haven't recieved anything, if any of you got the update dont hessitate to upload a file for us...
I'm uploading right now, I could't do anything yesterday cuz I was on 4G all the time.
it's in 30% so get a coffe
BTW it will be in MEGA
bunglemx said:
I'm uploading right now, I could't do anything yesterday cuz I was on 4G all the time.
it's in 30% so get a coffe
BTW it will be in MEGA
Click to expand...
Click to collapse
Thank you man!
.zip link in the OP
samagas said:
Please somebody upload the zip, I'm on Nextel and I can't to keep waiting to feel some Lollipop love
Click to expand...
Click to collapse
You're on nextel carrier branded ? Can you put this ota on 1097 from carrier ?
It's the same model xt1097, as far as I know the only diference between the stock ROM and the carrier's ROM is the internet settings and stuff. Nextel Doesn't push bloatware or such so I'm guessing they just load some settings and rebrand the sistem version. I'm on 21.27.3, maybe the baseband could bring some problems I don't know... but I'm pretty shure it will work. I've been flashing stuff in carrier models for a while know and besides internet settings I've never had more problems
If somebody knows me wrong please correct me
So, how do we flash this?
samagas said:
It's the same model xt1097, as far as I know the only diference between the stock ROM and the carrier's ROM is the internet settings and stuff. Nextel Doesn't push bloatware or such so I'm guessing they just load some settings and rebrand the sistem version. I'm on 21.27.3, maybe the baseband could bring some problems I don't know... but I'm pretty shure it will work. I've been flashing stuff in carrier models for a while know and besides internet settings I've never had more problems
If somebody knows me wrong please correct me
Click to expand...
Click to collapse
I have an att model but I Sim unlock it and use it outside of the us , in Honduras, if al flash it I just configure my APN or what do I have to do ?
ijotech said:
I have an att model but I Sim unlock it and use it outside of the us , in Honduras, if al flash it I just configure my APN or what do I have to do ?
Click to expand...
Click to collapse
I think you only have to check your APN settings. If you have an US model just make shure you're flashing the proper zip for your model. Carriers just add apps and stuff nobody use.
Think of it as installing CyanogenMod, everyone around the world has installed it and yet there aint carrier versions. Everything is about the model, not the carrier.
Anyway, whatever you decide to do you're doing it at your own risk. I'm waiting a couple of days to hear from my carrier so I can't give any help until I do the proces my self.
samagas said:
I think you only have to check your APN settings. If you have an US model just make shure you're flashing the proper zip for your model. Carriers just add apps and stuff nobody use.
Think of it as installing CyanogenMod, everyone around the world has installed it and yet there aint carrier versions. Everything is about the model, not the carrier.
Anyway, whatever you decide to do you're doing it at your own risk. I'm waiting a couple of days to hear from my carrier so I can't give any help until I do the proces my self.
Click to expand...
Click to collapse
Thanks for you're response, I will try to flash MX update to my att carrier xt1097 and post results
ijotech said:
Thanks for you're response, I will try to flash MX update to my att carrier xt1097 and post results
Click to expand...
Click to collapse
I belive there is a thread in this forum about the US xt1097, why bont you give it a look?
Any luck? I tried flashing and it fails after trying to verify.
Hello,
I received my Oneplus 2 today and it does not support the LTE Band 3. It`s the north USA Version and i would like to ask if anyone figured out a method to unlock the LTE Band 3 (1800mhz) . It`s because the Hardware of the Oneplus USA Version is the same like the European version.
best ragards
That would be amazing if some one could figure that out. But as I did my research it seems that it's not possible that there's a hardware difference.
shlomi_vanono20 said:
Hello,
I received my Oneplus 2 today and it does not support the LTE Band 3. It`s the north USA Version and i would like to ask if anyone figured out a method to unlock the LTE Band 3 (1800mhz) . It`s because the Hardware of the Oneplus USA Version is the same like the European version.
best ragards
Click to expand...
Click to collapse
Should be the same procedure as the HTC M9 since they're the same processor. And for the prep work (drivers and enabling the modem diag mode) as in this thread for the OnePlus One.
TheManDroid said:
Should be the same procedure as the HTC M9 since they're the same processor. And for the prep work (drivers and enabling the modem diag mode) as in this thread for the OnePlus One.
Click to expand...
Click to collapse
Do the changes to the band stay after rebooting or upgrading the OS to a newer version? I wanted to unlock band 3 as well on my OP2.
I haven't tried writing the modem configuration yet to see if it sticks or not but was able connect the phone and read the configuration from it by following the instructions from the 2 posts I mentioned.
Say if you got Chinese oneplus 2 and changed software on it would it work on bands 20 I've seen this question asked before but can't find the post
Sent from my LG-H815 using XDA Free mobile app
anyone found a way to unlock band 3?
Have a look at this post
I suggest you to keep 3G instead of LTE because battery draining is so faster under LTE Mode. If you stay a place that have a poor LTE signal,that would be your battery killer.
acidreian said:
That would be amazing if some one could figure that out. But as I did my research it seems that it's not possible that there's a hardware difference.
Click to expand...
Click to collapse
Hi, this research includes some whitepaper research?, Does it actually has different hardware?, just wondering if someone knows this by solid proof?
To know if there is hope for us (Buyers of wrong OP2 version )
I'm using A2005 usa model in India and I'm unable to use it on Airtel 4G in India. When I spoke to the OnePlus customer service they said it will need to replace the motherboard as it's a Hardware issue. I'm waiting for the motherboard to arrive from china as they don't have it yet in India. So basically it's a Hardware issue on oneplus 2 unlike it's ancestors.
rahulrai said:
I'm using A2005 usa model in India and I'm unable to use it on Airtel 4G in India. When I spoke to the OnePlus customer service they said it will need to replace the motherboard as it's a Hardware issue. I'm waiting for the motherboard to arrive from china as they don't have it yet in India. So basically it's a Hardware issue on oneplus 2 unlike it's ancestors.
Click to expand...
Click to collapse
They will do it for free? Or what is the charge?
Ok, guys, I`ve unlock NVram to write. Now I can save any values to change enabled bands.
Intruction:
Requirements:
OnePlus 2 with TWRP and rooted.
QXDM Pro, drivers, etc, as described here http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
Stock ROM OnePlus2Oxygen_14_OTA_011_all_1512111634.zip.
Attached file.
Just unzip attachment and replace file in ROM OnePlus2Oxygen_14_OTA_011_all_1512111634.zip, in RADIO folder. Flash via twrp.
After boot you will see warning "NV backup corrupted" or something like this, dont worry.
Use QXDM to change band as you want, reboot and check. Voilya. But LTE will not work, because it is hardware issue, lol.
A few words about attached file. I just unzip this file from stock ROM, search AC 1Ah (6828 little endian) and DB 08 (56072, US LTE band) together and replace DB 08 with DF 10. Dont ask, what I did, I dont know, lol. But it is work.
Implex said:
Ok, guys, I`ve unlock NVram to write. Now I can save any values to change enabled bands.
Intruction:
Requirements:
OnePlus 2 with TWRP and rooted.
QXDM Pro, drivers, etc, as described here http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
Stock ROM OnePlus2Oxygen_14_OTA_011_all_1512111634.zip.
Attached file.
Just unzip attachment and replace file in ROM OnePlus2Oxygen_14_OTA_011_all_1512111634.zip, in RADIO folder. Flash via twrp.
After boot you will see warning "NV backup corrupted" or something like this, dont worry.
Use QXDM to change band as you want, reboot and check. Voilya. But LTE will not work, because it is hardware issue, lol.
A few words about attached file. I just unzip this file from stock ROM, search AC 1Ah (6828 little endian) and DB 08 (56072, US LTE band) together and replace DB 08 with DF 10. Dont ask, what I did, I dont know, lol. But it is work.
Click to expand...
Click to collapse
There is easier way to do that without corrupting the backup.
Simply change the value is QXDM.
Then in the phone dial *#268#
Press the NV parameters
Press the Static NV Force Backup.
This will copy the new values to the backup, and they will stick later on.
BTW, to be on the safe side, make sure to backup your dycnvbk, stanvbk and EFS.
Not working for me. Cause com.android.phone crash after dial. May be because my backup is corrupted. Later will try with stock backup. But thank you anyway.
I am using the stock image with the stock phone app.
I am using Mokee, chinese AOSP firmware. BTW, I just erased nv backup partition and keep playing with nv ram. Hope will not brick my phone ))
What version do you have? US/EU/CH?
In case you have EU, cab you PM me with qcn of your device?
Unfortunatelly I have US version.
I know a way to add bands in snapdragon 801 (i did in xiaomi mi note) never tried in OPT since it has all bands i need . but it should be the same. Search google for adding bands in mi note
I have a G900V bootloader unlocked currently running CM 13 and I would like to add Sprint CDMA & LTE bands so I can use a The Peoples Operator SIM card in an area that has better Sprint coverage than VZW. I read over this Guide on adding GSM & LTE Bands to the G900V and calculated the binaries to add the bands:
CDMA 0,1,10
LTE 2,4,13,25,26,41
CDMA Binary 10000000010
LTE Binary 100000000000000110000000000010000000010100
All set to go but I can't seem to get figure out how to get into USB Settings to change from AP to CP and MTP + ADB to RNDIS + DM + Modem, the dialer codes just don't seem to work even after changing efs/carrier/hiddenmenu from OFF to ON. I took a look at EFS Pro but it doesn't seem to have an option to Change from AP to CP. Any help would be greatly appreciated.
If your trying to get into diag mode this will do it running cm13.
http://forum.xda-developers.com/showthread.php?t=1626638
jbgtenn said:
If your trying to get into diag mode this will do it running cm13.
http://forum.xda-developers.com/showthread.php?t=1626638
Click to expand...
Click to collapse
Thank yo for the link. Sadly I couldn't get the scripts to work on my G900V S5 CM13. But that link ended up leading me to this one CM13 QPST Editing files is a little above my paygrade so to speak, I've been following directions for years but still a total newb at most of this stuff but I am hoping I'm on the right track.
twolostminds said:
Thank yo for the link. Sadly I couldn't get the scripts to work on my G900V S5 CM13. But that link ended up leading me to this one CM13 QPST Editing files is a little above my paygrade so to speak, I've been following directions for years but still a total newb at most of this stuff but I am hoping I'm on the right track.
Click to expand...
Click to collapse
It should work. Are you running the diag.sh script? I have same phone and cm13 and it works for me.
jbgtenn said:
It should work. Are you running the diag.sh script? I have same phone and cm13 and it works for me.
Click to expand...
Click to collapse
I run DIAG.SH and it just hangs there. I think I am going to do a fresh install of CM13 later this week and give it another shot.
this is what i'm trying to figure out, because i can get a good local S5 VZW but SPR use different LTE bands.
i know typically the saying is never flash anything for a different carrier of your model, but some people seem to do it with a ymmv statement, wondering if this may be the easier route to get it to just work like a native phone.
i've read several threads from people talking about carrier rom swap, some casually saying sure it can work, but no updates from OPs or others that said they would try, definitively saying that it worked or failed.
so... has anyone literally gotten something like the Odin flashable firmware at sammobile or someplace for the Verizon VZW sm-g900v and flashed it with the Sprint SPR sm-g900p stock firmware, completely changing its baseband, modem, everything so it now identifies and works the same as a Sprint phone?
or should i just keep waiting for another similarly cheap S5 bundle in a Sprint flavor?
Did you try *#0808#
Sent from my SM-G955U using Tapatalk
twolostminds said:
I have a G900V bootloader unlocked currently running.......
Click to expand...
Click to collapse
I've never added any bands to my G900V myself but, I do know that it's plausible to do this.
From what I can tell, the only bands that are needed that the SM-G900P has vs the SM-G900V are specific to the 4G LTE.
Though I did confirm this using a few different locations, I believe that the following link is the best choice in viewing the comparisons between the two devices.
https://www.phonemore.com/compare/p...m-g900v-vs-samsung-galaxy-s5-sm-g900p/4561723
With that guidance...
The following link is one of the Guides available on the forum for adding Bands to a GS5. It was closed but, not because it wasn't working. It was closed because of the negative interactions from various members in there but, the guide and downloads are still good.
https://forum.xda-developers.com/showthread.php?t=2886059
Please Note the success stories on the second post...
The following is another guide as well. Though, it's located within the Galaxy Note 4 area, you could say that the Galaxy Note 4 is the "Note" counterpart to the Galaxy S5.
https://forum.xda-developers.com/showthread.php?t=3160864
Please Note that the OP does reflect some S5 information as well...
Those are just 2 thread examples to help accomplish what you're looking to do.
I do wish you the best of luck and hopefully the next post here will reflect your success!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
thanks for the double check.
it looks like those are some of the threads and sites i've looked through already as i wanted to be sure i had the proper lte bands that the Sprint model came with, and it seemed possible.
however, with the increasing coverage of cybersecurity, i am increasingly hesitant the more closed source and leaked tools are involved (especially when i see some thread guides that have a mod edit for malicious download link removal).
i suppose i should just pass on the Verizon listing, and wait to spot a similarly good deal from a local person selling their personally cared for Sprint S5 plus spare battery charger case and 2nd battery all under $100 (i'm sure you can understand why i wanted to "make it work", hehe).
Moto g5 plus 64g (single SIM),unlocked bootloader, root...4g works fine on stock ROM rooted w/Xposed
. ..and that's great but Ive flashed custom ROMs
Resurrection
...and Halogen
... and Desolation
... and they are very nice ROM s but I only get 3g (no LTE) and the only info I find on this is a quick-fix w/jio SIM using a DUAL SIM. .... Am I the only unlucky human w/a single SIM 3g problem?
I was so excited about this phone, thought I did all of my research , bought TWO 64g g5 plus phones(not 32g no way because I wanted to BEST lol but its single sim, stupid me).
...should I just give up on custom ROMs ? ...or is there something can be done?
Ive being at this for 2 weeks now...Any/all info very appreciated.
I would've posted in other forum but wouldn't let me due to lack of status....or rep...or bling..or something.
Do you have correct APN set? On some custom ROMs I have installed I had to change APN, because it was set to first in the list by default.
I dont know much about APN ...not durecwhst it's suppose to be set at..im boost mobile.. I'll start researching that next ..thanks brother
No luck.
I found the APN settings on Boost mobile site, I set/saved that to no avail.
I went back to stock/rooted and 4g works fine. But no matter which custom ROM I use I still only have 3g.
Surely someone somewhere knows how to set/fix this.
Can a Mod move this to where someone may have hands-on with this 3g vs 4g issue? Dev or someone?
Month later...5 custom roms later...still either no 4g on custom rom or no camera on simple root w magisk. I still can't post in Dev forum.
No LTE
Bigmotoxer said:
Month later...5 custom roms later...still either no 4g on custom rom or no camera on simple root w magisk. I still can't post in Dev forum.
Click to expand...
Click to collapse
Have the same problem, how did u go back to stock? TWRP restore? or did you fastboot flash stock fireware? I'm not sure if it makes a difference but after reading a few of these it looks like stock firmware may need to be reflashed with fastboot then start flashing custom ROMs with twrp. If you get the answer let me know if i find out I'll let you know?
Thanks
Update: yes there are ROMs that will fix the LTE problem, I was reading someone with a connection problem someone suggested downloading stock debloated , another suggested AOKP, downloaded both , first I tried debloated got LTE , then flashed the other, for VoLTE. Also I'm not sure if this is correct or not but fastboot flashing modems may work I'm not exactly sure and would need to look it up further is something else I read but didn't try as its 2:00am and I'm being yelled at by a hidden speaker in my kitchen which is why it took so long for me to even try to look for a reason because I've been getting yelled at so long I think I got cancer, I hope Santa brings them a tall glass of shut the f up so I get one day without being yelled at , also Lineage 15 says LTE working. I haven't used it since I don't want to mess with 8.0 right now. MeryXMaz
I'm havin the same issue. Also with Boost Mobile. Most other devices I've rooted have had some sort of boost/sprint/virgin APN fix .zip. But I donno....
RozWellZ said:
Have the same problem, how did u go back to stock? TWRP restore? or did you fastboot flash stock fireware? I'm not sure if it makes a difference but after reading a few of these it looks like stock firmware may need to be reflashed with fastboot then start flashing custom ROMs with twrp. If you get the answer let me know if i find out I'll let you know?
Thanks
Update: yes there are ROMs that will fix the LTE problem, I was reading someone with a connection problem someone suggested downloading stock debloated , another suggested AOKP, downloaded both , first I tried debloated got LTE , then flashed the other, for VoLTE. Also I'm not sure if this is correct or not but fastboot flashing modems may work I'm not exactly sure and would need to look it up further is something else I read but didn't try as its 2:00am and I'm being yelled at by a hidden speaker in my kitchen which is why it took so long for me to even try to look for a reason because I've been getting yelled at so long I think I got cancer, I hope Santa brings them a tall glass of shut the f up so I get one day without being yelled at , also Lineage 15 says LTE working. I haven't used it since I don't want to mess with 8.0 right now. MeryXMaz
Click to expand...
Click to collapse
Thanks for responding. I still haven't found a fix for the LTE. I will try to aokp again maybe something has been fixed or added. I did fix my camera problem by flashing elementalX so that's good. But not having LTE is not cool. And I also did not want to message w 8.0 yet.
So I tried AOKP to no avail. Still no 4g/LTE. That's time I'll never get back lol.
had the same problem XenonHD seems to work well...
I'll try it thanks
Hoping it'll get better with the official 8.0 release.
Hello all,
I recently unlocked my Moto E4 Qualcomm Sprint Version (Perry) and flashed Lineage OS 14.1. The OS is working but I am getting no service, and when I first set up the phone it say "Insert Sim Card" even though there is no sim tray. I have tried other ROMs but it the same problem for them also. Some things I have noticed is that there is no radio and Airplane mode keeps switching to in even when I turn it off. Also when I attempt to call people it says turn of Airplane mode even though it is off. I have searched some other forums on this topic since i am not the only one with this problem but none of the solutions worked for me. I have also tried creating new APNs and tried some of the LTE fixes but those also didn't work for me. Is there anyway to fix this "No Service" problem?
Thanks!
Stix97 said:
Hello all,
I recently unlocked my Moto E4 Qualcomm Sprint Version (Perry) and flashed Lineage OS 14.1. The OS is working but I am getting no service, and when I first set up the phone it say "Insert Sim Card" even though there is no sim tray. I have tried other ROMs but it the same problem for them also. Some things I have noticed is that there is no radio and Airplane mode keeps switching to in even when I turn it off. Also when I attempt to call people it says turn of Airplane mode even though it is off. I have searched some other forums on this topic since i am not the only one with this problem but none of the solutions worked for me. I have also tried creating new APNs and tried some of the LTE fixes but those also didn't work for me. Is there anyway to fix this "No Service" problem?
Thanks!
Click to expand...
Click to collapse
- sim card located under battery
- no known/proven fix at present
- return to stock to restore functionality
Stix97 said:
Hello all,
I recently unlocked my Moto E4 Qualcomm Sprint Version (Perry) and flashed Lineage OS 14.1. The OS is working but I am getting no service, and when I first set up the phone it say "Insert Sim Card" even though there is no sim tray. I have tried other ROMs but it the same problem for them also. Some things I have noticed is that there is no radio and Airplane mode keeps switching to in even when I turn it off. Also when I attempt to call people it says turn of Airplane mode even though it is off. I have searched some other forums on this topic since i am not the only one with this problem but none of the solutions worked for me. I have also tried creating new APNs and tried some of the LTE fixes but those also didn't work for me. Is there anyway to fix this "No Service" problem?
Thanks!
Click to expand...
Click to collapse
Try this build
https://www.androidfilehost.com/?w=files&flid=284911
Only flash the rom and gapps at first.
Edit: it worked for this user, should work for you also
https://forum.xda-developers.com/showpost.php?p=78055219&postcount=3
Jason M. said:
Try this build
https://www.androidfilehost.com/?w=files&flid=284911
Only flash the rom and gapps at first.
Edit: it worked for this user, should work for you also
https://forum.xda-developers.com/showpost.php?p=78055219&postcount=3
Click to expand...
Click to collapse
Holy crap this actually worked! Thank you so much! I have a question though. I'm guessing this is the only ROM that Sprint works with right now?
Stix97 said:
Holy crap this actually worked! Thank you so much! I have a question though. I'm guessing this is the only ROM that Sprint works with right now?
Click to expand...
Click to collapse
Yes until he post his sources and let other people build from them
Stix97 said:
Holy crap this actually worked! Thank you so much! I have a question though. I'm guessing this is the only ROM that Sprint works with right now?
Click to expand...
Click to collapse
I didn't post it just to screw with everyone. I'll have trees posted for the devs here to update their roms ASAP I just have other priorities atm. Bear with me please. It's just a matter of missing firmware symlinks so if anyone can figure that out before I post the changes to my trees, feel free.
Jason M. said:
I didn't post it just to screw with everyone. I'll have trees posted for the devs here to update their roms ASAP I just have other priorities atm. Bear with me please. It's just a matter of missing firmware symlinks so if anyone can figure that out before I post the changes to my trees, feel free.
Click to expand...
Click to collapse
No problem bro you do your work the community needs you
Jason M. said:
I didn't post it just to screw with everyone. I'll have trees posted for the devs here to update their roms ASAP I just have other priorities atm. Bear with me please. It's just a matter of missing firmware symlinks so if anyone can figure that out before I post the changes to my trees, feel free.
Click to expand...
Click to collapse
Another happy customer: https://forum.xda-developers.com/mo...perry-lte-fix-challenge-t3858512/post78076210
I tried flashing Jason M.'s rom on my XT1766 (boost) but I couldn't get my GSM SIM cards to work.
I tried with FreedomPop, Google Fi, and Simyo (a European carrier) with different behaviors.
The FreedomPop and Google Fi SIM cards are not detected and the Mobile network settings are greyed out.
The Simyo (European carrier) SIM card is detected, after unlocking it with its PIN, I got the following message "SIM card is locked. Emergency call only". In the other hand the Mobile network settings are working, but can't add new APNs, message "Access Point Name settings are not available for this user".
Thank you
Screenshots can be found below:
tinypic.com/r/jhtx0l/9
tinypic.com/r/69oz1u/9
tinypic.com/r/27ywf94/9
golouse said:
I tried flashing Jason M.'s rom on my XT1766 (boost) but I couldn't get my GSM SIM cards to work.
I tried with FreedomPop, Google Fi, and Simyo (a European carrier) with different behaviors.
The FreedomPop and Google Fi SIM cards are not detected and the Mobile network settings are greyed out.
The Simyo (European carrier) SIM card is detected, after unlocking it with its PIN, I got the following message "SIM card is locked. Emergency call only". In the other hand the Mobile network settings are working, but can't add new APNs, message "Access Point Name settings are not available for this user".
Thank you
Screenshots can be found below:
tinypic.com/r/jhtx0l/9
tinypic.com/r/69oz1u/9
tinypic.com/r/27ywf94/9
Click to expand...
Click to collapse
Any chance you know how to how to run get.prop in a terminal and post me the output? I'd like to see your apns from stock also.
Jason M. said:
Any chance you know how to how to run get.prop in a terminal and post me the output? I'd like to see your apns from stock also.
Click to expand...
Click to collapse
Hi Jason,
Thank your quick response, this is the output. Regarding the default APNs, there are no APNs, it is empty. (tinypic.com/r/jhtx0l/9)
Thank you
@golouse first off, I asked for that while running stock. That is from LineageOS. Second, sorry I didn't specify, next time please copy and paste the output into a text file and post it that way or post it on Hastebin.com and post a link. Please edit that post and remove the getprop because all that makes things load slower for some users. i also should have mentioned you might want to remove your phone number and anything else like your imei.
Edit: stock apns are in system/etc/apns_conf.xml
Edit2: just copy the whole apns_conf.xml and upload it
Jason M. said:
@golouse first off, I asked for that while running stock. That is from LineageOS. Second, sorry I didn't specify, next time please copy and paste the output into a text file and post it that way or post it on Hastebin.com and post a link. Please edit that post and remove the getprop because all that makes things load slower for some users. i also should have mentioned you might want to remove your phone number and anything else like your imei.
Edit: stock apns are in system/etc/apns_conf.xml
Edit2: just copy the whole apns_conf.xml and upload it
Click to expand...
Click to collapse
Thank you for the heads up, I will try to get the APNs and getpop output today.
golouse said:
Thank you for the heads up, I will try to get the APNs and getpop output today.
Click to expand...
Click to collapse
This is the stock getprop output pastebin.com/PQrBRDxi
and the apns_conf.xml can be found at www.dropbox.com/s/bdl6pqf6nargj5u/apns-conf.xml?dl=0
Thank you
golouse said:
This is the stock getprop output pastebin.com/PQrBRDxi
and the apns_conf.xml can be found at www.dropbox.com/s/bdl6pqf6nargj5u/apns-conf.xml?dl=0
Thank you
Click to expand...
Click to collapse
Cool. Thanks. I'll see what I can do asap, but If you have an XT1766 I was under the impression that they were only CDMA capable. You mentioned a European carrier also and I also thought that Europe only had GSM carriers. Where did you purchase your phone? Please correct me if I'm wrong.
Jason M. said:
Cool. Thanks. I'll see what I can do asap, but If you have an XT1766 I was under the impression that they were only CDMA capable. You mentioned a European carrier also and I also thought that Europe only had GSM carriers. Where did you purchase your phone? Please correct me if I'm wrong.
Click to expand...
Click to collapse
Officially the XT1766 is a CDMA phone but it is GSM capable. Squids2 LineageOS 14.1 builds made the phone connecting to GSM networks, calls, and data.
I purchased several XT1766 in the U.S for my family, then installed Squids2's LineageOS 14.1. All of them are currently working in Europe (yes, Europe is GSM only) without problems.
It is just this last phone, I made the mistake of updating stock (NCQS26.69-64-10), rather than wipe it and install LineageOS 14.1 as soon I got it as I did with the other ones.
golouse said:
Officially the XT1766 is a CDMA phone but it is GSM capable. Squids2 LineageOS 14.1 builds made the phone connecting to GSM networks, calls, and data.
I purchased several XT1766 in the U.S for my family, then installed Squids2's LineageOS 14.1. All of them are currently working in Europe (yes, Europe is GSM only) without problems.
It is just this last phone, I made the mistake of updating stock (NCQS26.69-64-10), rather than wipe it and install LineageOS 14.1 as soon I got it as I did with the other ones.
Click to expand...
Click to collapse
Ok, makes sense. I'll try adding your carrier info to the XT1766 in init. I'll post another build later tonight or tomorrow for you to try. I'm pretty sure that's what's needed.
@golouse Try this build
https://www.androidfilehost.com/?fid=11410963190603841787
I figured if squid2's builds worked for your other devices I might as well just make a build with the origional init.moto.cpp and without replacing the stock apns. Like the missing firmware. It should work.
This is not for everyone! It should work for any other GSM users though I guess.
For everyone waiting for sources that work after the recent stock updates with a few other changes I made here you go
https://github.com/JasonM45/android_device_motorola_perry
https://github.com/JasonM45/android_device_motorola_qcom318-32
https://github.com/JasonM45/android_device_motorola_msm8937-common
https://github.com/JasonM45/android_kernel_motorola_msm8937
https://github.com/JasonM45/proprietary_vendor_motorola
Thank you @squid2 and @SeanStar and whoever else chipped in for their original work on the trees!
Thank you for your efforts Jason. I've just installed it but the problem persist, same behavior.
golouse said:
Thank you for your efforts Jason. I've just installed it but the problem persist, same behavior.
Click to expand...
Click to collapse
Might be because of all the system.props that were added. Didn't think about that. I'll make one more build with those reverted to the way squid2 had them. If that doesn't work, there's one more thing I can try but I don't know when I'll have a chance to do that.
Edit: actually, now that I think about it there was a lot more than those system.props added. I'd be better off just using squid2's trees and adding the couple things to make it work after the latest update. That's gotta work. You might need to restore stock before trying it and maybe erase modem data. I'll do that as soon as I get a chance.