https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
After step 3 with LS997, I flash the LS997 stock ROM and superSU in twrp, but the phone does not boot into the system and returns to twrp only. I try again, but it will only boot with twrp. How can I escape the soft brick?
sprint lg v20 ls997
Daemosan said:
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
After step 3 with LS997, I flash the LS997 stock ROM and superSU in twrp, but the phone does not boot into the system and returns to twrp only. I try again, but it will only boot with twrp. How can I escape the soft brick?
Click to expand...
Click to collapse
same here i have a ls997 and it brick after step 3 trying to [5) Watch the RUNMEFIRST dialog for when it tells you to run Step2. Then;
On Windows, double-click "Step2.bat"
On Linux/MacOS, type:
Code:
./Step2.sh
# OR
Bash ./Step2.sh
Once step 2 is completed, you'll be in bootloader, procced to "Flashing TWRP" section to continue.
Note/Warning: Verizon Users Vibrator will be constantly going off, until the whole process is complete (Past Android Setup Wizard).
- Flashing TWRP and Fixing Varient Issues:
1) Run Step3, so TWRP can be flashed and a working boot.img flashed (Fix's screen problem) by;
On Windows, double-click "Step3.bat"
On Linux/MacOS, type:
Code:
./Step3.sh
# OR
Bash ./Step3.sh
******Sidenote******
If you get message saying <waiting for device> on Step3.bat then you do not have the fastboot drivers installed(you may have the program but not the drivers).
To fix: Go to your device manager while the device is connected in fasboot and right click the item that says Android and select update drivers. Then select from internet. and let it install the drivers then try step3.bat again.]
tried going into download mode to flash it. but that didnt work. really relying on some help!
Do the factory reset by doing volume down and power until you see LG then release ONLY POWER and hold both again. you will get a screen that says factory reset. do yes twice.
me2151 said:
Do the factory reset by doing volume down and power until you see LG then release ONLY POWER and hold both again. you will get a screen that says factory reset. do yes twice.
Click to expand...
Click to collapse
I solved it this way. Thank you.
me2151 said:
Do the factory reset by doing volume down and power until you see LG then release ONLY POWER and hold both again. you will get a screen that says factory reset. do yes twice.
Click to expand...
Click to collapse
You'll end up in recovery again - just click reboot system and you'll be out of the twrp bootloop.
If it stays on the lg screen or static screen for an excessive time - more than say 15 minutes - pull battery, reinsert and hold power until you see any sign of life and it should boot this time.
i'm same problem my lg dont start, i'm freak out
shagrath222 said:
i'm same problem my lg dont start, i'm freak out
Click to expand...
Click to collapse
We need more than 0 details to figure out whats happening and how to fix it.
Related
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
SPBoss said:
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
Click to expand...
Click to collapse
1. If you connect your phone to PC, what happens?
2. I also had trouble accessing TWRP, so I did the "Factory reset" button combo (Don't remember what it was) and when I slided to confirm, twrp booted. From there I think you have adb and can fix everything.
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Alone i used lg flashtoolnow,its ok. I didnt click factory reset i assumed it would delete everything? With lgflash i have restored system and everything is how i left it.
Sent from my LG-D802 using Tapatalk
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
worked like a charm, many thanks!
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
xzork said:
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
Click to expand...
Click to collapse
First off, you'll need to make sure your phone isn't plugged in or it won't work - I'm afraid if you can't enter recovery you'll have to go back to stock. http://forum.xda-developers.com/showthread.php?t=2432476
Sucess
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
Thank you, saved me day.
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
PUNNU NAGI said:
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
Click to expand...
Click to collapse
Try to flash the Kitkat baseband or if you are fully stock then i suggest you to flash the KDZ to go back to full stock(http://forum.xda-developers.com/showthread.php?t=2432476)
If you still have important data like pictures or what then do normal flash. Use the Android version you also had as stock and use that as KDZ. If you are not stock then can you reach TWRP?
and what did you do before that causes the black screen?
Stuck with the LG logo. Nothing happens in download mode
Hi All, not sure if this has been answered prior. This is what happen, I wanted to flash SOKP so I backup my phone and saved to PC using Titanium. I have TWRP installed.
Boot Into Recovery Mode and Wipe Data,System,Cache,Dalvik
I restart so I can flash the SOKP Rom and all I see on my phone is the LG logo. I try to restart using the Power and Up button, but it just sits in the download mode saying "Firmware Update" with no movement or action.
The phone is unable to turn off now. This is my first go at Flashing a Rom. Any help or suggestion would be greatly appreciated. Thanks in advance
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
jungsora said:
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
Click to expand...
Click to collapse
same here .... plz any solution?
justme!! said:
same here .... plz any solution?
Click to expand...
Click to collapse
Someone help, same issue.
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
Someone help
Hey, I have the nearly same problem with my G2 running CM12 also installed recovery
But I can't reboot in recovery neither with the factory reset buttons, nor manually with SDK Manager, because the device is not found.
So I can just reboot and it shows the CM boot image, or get in the download mode.:crying:
Any suggestions?:fingers-crossed:
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
I was in same stuation before 2 months send to warranty.
If rooted you can use adb shell with su and push partitions with "dd" while staring (stuck in lg logo)
Help!!
I have boot loop, only download mode accessible, device not found on adb. When I try LG FlashTool, instead of using the KDZ file I provide, it starts downloading some other firmware at times, and at times it says your software is up to date. What do I do? :|
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
Dear,
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
I hav custom cm11 Kitkat ROM installed on it...
but after I installed the rom, and again tried to reboot
into TWRP recovery, it is just stuck on the blue color
TEAMWIN screen... Please help how to fix it...!
USE method with .tot is working for me
Hi all.
Please help me.
I bought a new LG G2 D802 32 GB.
I made all upadtes then rooted with ioroot25 and applied D802_AutoRec.apk.
I forgot to put new ROM.zip in internal memmory.
I did full wipe (Dalvik, Cache, System, Data) and after that phone was stuck at lg logo.
I managed to flash new rom http://forum.xda-developers.com/showthread.php?t=2432476 used Europe OPEN KitKat D80220D_00.kdz
All went ok but after restart i have "Enter PIN/password to decrypt" and cant`t do anything.
I cant`t even enter recovery/hard reset tryed - "When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button." - I manged to enter recovery earlier
Phone is still rooted.
Alexxxx said:
Hi all.
Please help me.
I bought a new LG G2 D802 32 GB.
I made all upadtes then rooted with ioroot25 and applied D802_AutoRec.apk.
I forgot to put new ROM.zip in internal memmory.
I did full wipe (Dalvik, Cache, System, Data) and after that phone was stuck at lg logo.
I managed to flash new rom http://forum.xda-developers.com/showthread.php?t=2432476 used Europe OPEN KitKat D80220D_00.kdz
All went ok but after restart i have "Enter PIN/password to decrypt" and cant`t do anything.
I cant`t even enter recovery/hard reset tryed - "When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button." - I manged to enter recovery earlier
Phone is still rooted.
Click to expand...
Click to collapse
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
Didnt make any difference to mine It turns on I try all different key combinations to get into recovery but its as if its not there. When my phone loads up I get Enter PIN/password to decrpyt and after about 3-5 mins it starts clicking. I have restored it back to stock but the decryption screen is always there.....Is my phone knackered?
Cheers.
THX XxZombiePikachu !!!
I managed to enter recovery. "hold the volume down+up don't touch power"
Did a factory reset and no more Enter PIN/password to decryp.
New error occurred - Only 10GB available after recovery (G2 32 GB) but i used this solution: http://forum.xda-developers.com/showthread.php?t=2470207
All ok now.
@Sharaak
try to make a recovery via official LGMobileSupportTool.
I also flashed Europe OPEN KitKat D80220D_00.kdz
There is also: http://forum.xda-developers.com/showthread.php?t=2475045
perhaps it will unbick your device
Forgot password on my other LG G2
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
I want to thank Alexxxx for the info on entering recovery mode.
I had encrypted my other G2 cuz I never used it but wanted to use it so I turned it on
and behold, it wanted password that I forgot. I live nowhere near a Sprint store so I started
using internet.
The message from Alexxxx saved the day.
Thanks Alexxxx and XDA Forum
Mad_DoggKK said:
I want to thank Alexxxx for the info on entering recovery mode.
I had encrypted my other G2 cuz I never used it but wanted to use it so I turned it on
and behold, it wanted password that I forgot. I live nowhere near a Sprint store so I started
using internet.
The message from Alexxxx saved the day.
Thanks Alexxxx and XDA Forum
Click to expand...
Click to collapse
that's great but you should have quoted the post which helped you provided by alexxxx
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
Thanks alot i figuried it out
same problem
Hi guys,
I have the same exact problem, restored my rom with LG Flash tool 2014, but now it's always asking me this pin/password. And I tried all combinations with volume up/down and it's impossible to go in recovery, what can I do? My LG G2 is a european model 32 GB
this is the screen I'm always getting
Same Problem Here
Hi,
I'm having the same problem.
I have an LG D802. I was on CloudyG3 with TWRP recovery. While using the phone, I noticed a yellow tinge in the right side of the LCD. So I figured, I'll show it to the service center and get the issue sorted out. Obviously, I couldn't take it there rooted and on a custom ROM as they would annul my warranty otherwise. So I decided to unroot it using the LG tools. (I have done this before too. But I did not face any such problem back then).
This time, it is taking me to the screen and asking me to enter a pin/password to decrypt.
I tried booting into recovery using the old method (volume_down + power and LG logo flashes, release and press power again, then 3 times power) and also tried another method as recommended by someone above (volume_down + power till LG logo appears and then release power and press volume_up). None of them work now. In the first method, the screen just goes blank for a few seconds and the phone reboots while in the second method, the phone boots into safe mode.
Kindly advise on what to do. I am stuck and my warranty expires on the 18th of November.
Problem Solved
Earlier when I was using the Flash.Tool.1.0.54, it wouldn't ask for region and language in the pop-up. It would just open the LG Mobile Support Tool and then I manually selected the Start Upgrade button to flash the phone. The problem with this was that on boot it would ask for pin/password. I couldn't even boot into the stock recovery for some reason.
Then I used the LG Flash tool 2014: http://forum.xda-developers.com/showthread.php?t=2470207
There was a region and language pop up and it proceeded to install the firmware.
But on boot, it still asked for the pin/password. So I tried to boot into recovery and it worked this time! Pressed the power button 3 times and it wiped my phone.
On reboot, the phone worked perfectly without asking for the pin/password. But, now it was reading my internal storage as only 16GB. I followed the directions in the link provided by @Alexxxx to repartition the internal storage in my phone. Here is the link once again: http://forum.xda-developers.com/showthread.php?t=2470207
It worked perfectly for me.
imranmerchant said:
Earlier when I was using the Flash.Tool.1.0.54, it wouldn't ask for region and language in the pop-up. It would just open the LG Mobile Support Tool and then I manually selected the Start Upgrade button to flash the phone. The problem with this was that on boot it would ask for pin/password. I couldn't even boot into the stock recovery for some reason.
Then I used the LG Flash tool 2014: http://forum.xda-developers.com/showthread.php?t=2470207
There was a region and language pop up and it proceeded to install the firmware.
But on boot, it still asked for the pin/password. So I tried to boot into and it worked this time! Pressed the power button 3 times and it wiped my phone.
On reboot, the phone worked perfectly without asking for the pin/password. But, now it was reading my internal storage as only 16GB. I followed the directions in the link provided by @Alexxxx to repartition the internal storage in my phone. Here is the link once again: http://forum.xda-developers.com/showthread.php?t=2470207
It worked perfectly for me.
Click to expand...
Click to collapse
bro idont understand "boot into press power button 3 times "
magndo said:
bro idont understand "boot into press power button 3 times "
Click to expand...
Click to collapse
Sorry, that was a typo.
*So I tried to boot into recovery and it worked this time! Pressed the power button 3 times and it wiped my phone.
What I meant is, that I tried booting into recovery. from there it asked me to press the power button three times to wipe my phone.
Sorry for the late reply.
imranmerchant said:
Hi,
I'm having the same problem.
I have an LG D802. I was on CloudyG3 with TWRP recovery. While using the phone, I noticed a yellow tinge in the right side of the LCD. So I figured, I'll show it to the service center and get the issue sorted out. Obviously, I couldn't take it there rooted and on a custom ROM as they would annul my warranty otherwise. So I decided to unroot it using the LG tools. (I have done this before too. But I did not face any such problem back then).
This time, it is taking me to the screen and asking me to enter a pin/password to decrypt.
I tried booting into recovery using the old method (volume_down + power and LG logo flashes, release and press power again, then 3 times power) and also tried another method as recommended by someone above (volume_down + power till LG logo appears and then release power and press volume_up). None of them work now. In the first method, the screen just goes blank for a few seconds and the phone reboots while in the second method, the phone boots into safe mode.
Kindly advise on what to do. I am stuck and my warranty expires on the 18th of November.
Click to expand...
Click to collapse
Hi guys help me .....firstly I accidentallydeleted my stockRom and I had twrp recovery runningcloudyRom but I tried. To get my stockRom back by using LG united driver the stock was flashed successfully but it says pin or password decrypt.........help me plz
Hi, I'm stuck in the same situation. I've managed to flash the same stock rom (D80220H), and thanks to that managed to enter in recovery. Wiped data/recovera and the cache partition (see attached image) numerous times, but still get the error...
Any help with that?
I having a similar problem with a LG G3, but in my case I can flash AOSP roms like CM or Blisspop, but if I try to flash MIUI or any kind of stock rom (even the customizeds like CloudyG3) I stop in a screen asking for PIN, anyone knows how to solve it?
hi
flipeicl said:
I having a similar problem with a LG G3, but in my case I can flash AOSP roms like CM or Blisspop, but if I try to flash MIUI or any kind of stock rom (even the customizeds like CloudyG3) I stop in a screen asking for PIN, anyone knows how to solve it?
Click to expand...
Click to collapse
i have same problem on my lg g3 D850
can you help me? you solved your error: enter pin/password to decrypt
1986rom said:
i have same problem on my lg g3 D850
can you help me? you solved your error: enter pin/password to decrypt
Click to expand...
Click to collapse
No, I can't find nothing about it in the internet and no one here in XDA talking about it.
flipeicl said:
No, I can't find nothing about it in the internet and no one here in XDA talking about it.
Click to expand...
Click to collapse
you try download some recovery files from other phone and put it on sd card and then recovery from your device? i think it must help, but i cant go recovery mode from my device, i am newbie on lg bootloader, other devices what i have i easy go in recovery mode but on lg when i try to go recovery mode it only asking me erase all data, when i erasing all data and turn on device i have same problem: enter pin/password to decrypt
1986rom said:
you try download some recovery files from other phone and put it on sd card and then recovery from your device? i think it must help, but i cant go recovery mode from my device, i am newbie on lg bootloader, other devices what i have i easy go in recovery mode but on lg when i try to go recovery mode it only asking me erase all data, when i erasing all data and turn on device i have same problem: enter pin/password to decrypt
Click to expand...
Click to collapse
Recovery files from other phones?
Hi,
I am struggling with this damn LG D802. A friend brought it to me to unlock it as he said.
when i turned it on , it boots and it stops where it asks me "Enter pin/password to decrypt"
So i thought ok, i would enter recovery and wipe cache. That's my problem, i can't enter recovery mode.
I tried power + volume down , and when LG logo appears then i release and hold them again , nothing. I also tried volume down + power and when LG logo come , i release them and pressed volume up+volume down. Nothing. And some other combinations but still nothing.
The next step was to reflash it, so i used LG flash tool 2014, i download the right kdz file , and flashed procedure went fine. But on next reboot same problem " Enter pin/password to decrypt".
There are no files that i need from the phone , just to make it work again .
Any ideas?
In flashtool 2014, keep the cdma option in the menu, select CSE flash. It wipes everythinG. If it's not the sim card your device should be fine,
bender_007 said:
In flashtool 2014, keep the cdma option in the menu, select CSE flash. It wipes everythink. If it's not the sim card your device should be fine,
Click to expand...
Click to collapse
I tried that too, still nothing. Flash procedure completes with no errors, but no difference.
Any other ideas?
Thank you in advance
I am getting dizzy, can't you think something else?
Hey guys. I bircked my LG a couple of days ago and now it's in:
[810] fastboot mode started
[860] udc_start()
I cannot enter download mode because the phone will not shut down. When pressing and holding the power off button it turns off for a mere second and then the LG logo comes up and i get into fastboot again. The phone will NOT turn off.
When I connect it to the PC it is not detected as qhsusb_bulk in device manager but as a CMCC ADB Device>CMCC Composite ADB interface.
Any help is appreciated.
zeleman1a said:
When pressing and holding the power off button it turns off for a mere second and then the LG logo comes up and i get into fastboot again. The phone will NOT turn off.
Click to expand...
Click to collapse
hold pwr button longer, don't let it go when LG logo shows... only then the device will power off completely...
after that, search on how to enter the recovery (depending on your bootloader - see dorimanx kernel thread op)
60nine said:
hold pwr button longer, don't let it go when LG logo shows... only then the device will power off completely...
after that, search on how to enter the recovery (depending on your bootloader - see dorimanx kernel thread op)
Click to expand...
Click to collapse
I think I have TWRP. When it's turned off and and i press power+volume down and then when LG logo shows i press and hold them again i get into factory hard reset.
EDIT:I don't think i have recovery set up btw.
zeleman1a said:
I think I have TWRP. When it's turned off and and i press power+volume down and then when LG logo shows i press and hold them again i get into factory hard reset.
EDIT:I don't think i have recovery set up btw.
Click to expand...
Click to collapse
if you have a twrp recovery - it will first show "factory reset", you say "yes" 2 times and it will enter twrp (it will not wipe anything)
if you have stock recovery - then don't press "yes" in the reset screen...
did you by any chance flashed a kernel recently?
fastboot error message is commonly shown when people flash the kernel which is not for their variant - and this can easily be solved with flashing the right variant kernel... (i.e. you have d802 variant and you flashed kernel for d800 variant and vice versa)
Hi guys,
My Yotaphone 2 is currently stuck in a boot loop (shows android logo, then black screen, repeat) after a software update. I can get to the 'Downloading...' screen via power + vol. key and so have tried adb/fastboot as suggested in other similar threads. ADB can't see the device, which I guess is probably normal since it isn't booted up, but fastboot seemingly can. I've tried flashing the TWRP recovery which seems to go through fine on the PC end but doesn't seem to do anything at all on the phone itself. Calling a fastboot reboot gets the phone back to the boot loop and power + vol. goes back to the 'Downloading...' screen.
I've also tried using the Yotaphone flashing tool to flash a full android image - this also looked like everything was operating OK on the PC end but didn't seem to change anything on the phone once the process was complete.
Is there anything I'm missing or anything else I can try? Any help/ideas much appreciated!
Cheers.
pjrj said:
Hi guys,
My Yotaphone 2 is currently stuck in a boot loop (shows android logo, then black screen, repeat) after a software update. I can get to the 'Downloading...' screen via power + vol. key and so have tried adb/fastboot as suggested in other similar threads. ADB can't see the device, which I guess is probably normal since it isn't booted up, but fastboot seemingly can. I've tried flashing the TWRP recovery which seems to go through fine on the PC end but doesn't seem to do anything at all on the phone itself. Calling a fastboot reboot gets the phone back to the boot loop and power + vol. goes back to the 'Downloading...' screen.
I've also tried using the Yotaphone flashing tool to flash a full android image - this also looked like everything was operating OK on the PC end but didn't seem to change anything on the phone once the process was complete.
Is there anything I'm missing or anything else I can try? Any help/ideas much appreciated!
Cheers.
Click to expand...
Click to collapse
Do you have any idea what caused the bootloop? (maybe installing xposed or something?)
When you keep vol-up pressed at (not after) the moment the phone vibrates during power on, you will end up in TWRP recovery. There you can at least wipe->factory reset. Don't do this if you have stuff on your phone you'd like to keep though. (you can try to rescue/backup those by trying "adb pull <path_to_file>" when the phone is booted into TWRP)
SteadyQuad said:
Do you have any idea what caused the bootloop? (maybe installing xposed or something?)
When you keep vol-up pressed at (not after) the moment the phone vibrates during power on, you will end up in TWRP recovery. There you can at least wipe->factory reset. Don't do this if you have stuff on your phone you'd like to keep though. (you can try to rescue/backup those by trying "adb pull <path_to_file>" when the phone is booted into TWRP)
Click to expand...
Click to collapse
It was caused by doing an OS update (wasn't rooted or modified), I've only since tried installing the TWRP recovery and using fastboot to flash an official image to fix the looping. Flashing TWRP appears to work according to flashboot but holding the volume up key at the vibrate on power on doesn't do anything sadly.
pjrj said:
It was caused by doing an OS update (wasn't rooted or modified), I've only since tried installing the TWRP recovery and using fastboot to flash an official image to fix the looping. Flashing TWRP appears to work according to flashboot but holding the volume up key at the vibrate on power on doesn't do anything sadly.
Click to expand...
Click to collapse
Maybe I should rephrase: the vol-up should already be pressed once the vibrate starts. For a timing-insensitive, fool-proof (no pun intended) way you can enable bootloader (like you did before: you get the Downloading... screen). Then keep vol-up and power pressed together, after 15 seconds the device reboots hard, keep both keys pressed until you see TWRP 'curtain' screen, then release.
Did you try to use the YotaFlasher Windows application to reinstall an official ROM and restore factory defaults? You can get it from here, also download a ROM for your region here.