Related
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.
franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?
Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
SPBoss said:
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
Click to expand...
Click to collapse
1. If you connect your phone to PC, what happens?
2. I also had trouble accessing TWRP, so I did the "Factory reset" button combo (Don't remember what it was) and when I slided to confirm, twrp booted. From there I think you have adb and can fix everything.
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Alone i used lg flashtoolnow,its ok. I didnt click factory reset i assumed it would delete everything? With lgflash i have restored system and everything is how i left it.
Sent from my LG-D802 using Tapatalk
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
worked like a charm, many thanks!
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
xzork said:
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
Click to expand...
Click to collapse
First off, you'll need to make sure your phone isn't plugged in or it won't work - I'm afraid if you can't enter recovery you'll have to go back to stock. http://forum.xda-developers.com/showthread.php?t=2432476
Sucess
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
Thank you, saved me day.
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
PUNNU NAGI said:
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
Click to expand...
Click to collapse
Try to flash the Kitkat baseband or if you are fully stock then i suggest you to flash the KDZ to go back to full stock(http://forum.xda-developers.com/showthread.php?t=2432476)
If you still have important data like pictures or what then do normal flash. Use the Android version you also had as stock and use that as KDZ. If you are not stock then can you reach TWRP?
and what did you do before that causes the black screen?
Stuck with the LG logo. Nothing happens in download mode
Hi All, not sure if this has been answered prior. This is what happen, I wanted to flash SOKP so I backup my phone and saved to PC using Titanium. I have TWRP installed.
Boot Into Recovery Mode and Wipe Data,System,Cache,Dalvik
I restart so I can flash the SOKP Rom and all I see on my phone is the LG logo. I try to restart using the Power and Up button, but it just sits in the download mode saying "Firmware Update" with no movement or action.
The phone is unable to turn off now. This is my first go at Flashing a Rom. Any help or suggestion would be greatly appreciated. Thanks in advance
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
jungsora said:
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
Click to expand...
Click to collapse
same here .... plz any solution?
justme!! said:
same here .... plz any solution?
Click to expand...
Click to collapse
Someone help, same issue.
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
Someone help
Hey, I have the nearly same problem with my G2 running CM12 also installed recovery
But I can't reboot in recovery neither with the factory reset buttons, nor manually with SDK Manager, because the device is not found.
So I can just reboot and it shows the CM boot image, or get in the download mode.:crying:
Any suggestions?:fingers-crossed:
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
I was in same stuation before 2 months send to warranty.
If rooted you can use adb shell with su and push partitions with "dd" while staring (stuck in lg logo)
Help!!
I have boot loop, only download mode accessible, device not found on adb. When I try LG FlashTool, instead of using the KDZ file I provide, it starts downloading some other firmware at times, and at times it says your software is up to date. What do I do? :|
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
Dear,
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
I hav custom cm11 Kitkat ROM installed on it...
but after I installed the rom, and again tried to reboot
into TWRP recovery, it is just stuck on the blue color
TEAMWIN screen... Please help how to fix it...!
USE method with .tot is working for me
Hi all.
Please help me.
I bought a new LG G2 D802 32 GB.
I made all upadtes then rooted with ioroot25 and applied D802_AutoRec.apk.
I forgot to put new ROM.zip in internal memmory.
I did full wipe (Dalvik, Cache, System, Data) and after that phone was stuck at lg logo.
I managed to flash new rom http://forum.xda-developers.com/showthread.php?t=2432476 used Europe OPEN KitKat D80220D_00.kdz
All went ok but after restart i have "Enter PIN/password to decrypt" and cant`t do anything.
I cant`t even enter recovery/hard reset tryed - "When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button." - I manged to enter recovery earlier
Phone is still rooted.
Alexxxx said:
Hi all.
Please help me.
I bought a new LG G2 D802 32 GB.
I made all upadtes then rooted with ioroot25 and applied D802_AutoRec.apk.
I forgot to put new ROM.zip in internal memmory.
I did full wipe (Dalvik, Cache, System, Data) and after that phone was stuck at lg logo.
I managed to flash new rom http://forum.xda-developers.com/showthread.php?t=2432476 used Europe OPEN KitKat D80220D_00.kdz
All went ok but after restart i have "Enter PIN/password to decrypt" and cant`t do anything.
I cant`t even enter recovery/hard reset tryed - "When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button." - I manged to enter recovery earlier
Phone is still rooted.
Click to expand...
Click to collapse
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
Didnt make any difference to mine It turns on I try all different key combinations to get into recovery but its as if its not there. When my phone loads up I get Enter PIN/password to decrpyt and after about 3-5 mins it starts clicking. I have restored it back to stock but the decryption screen is always there.....Is my phone knackered?
Cheers.
THX XxZombiePikachu !!!
I managed to enter recovery. "hold the volume down+up don't touch power"
Did a factory reset and no more Enter PIN/password to decryp.
New error occurred - Only 10GB available after recovery (G2 32 GB) but i used this solution: http://forum.xda-developers.com/showthread.php?t=2470207
All ok now.
@Sharaak
try to make a recovery via official LGMobileSupportTool.
I also flashed Europe OPEN KitKat D80220D_00.kdz
There is also: http://forum.xda-developers.com/showthread.php?t=2475045
perhaps it will unbick your device
Forgot password on my other LG G2
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
I want to thank Alexxxx for the info on entering recovery mode.
I had encrypted my other G2 cuz I never used it but wanted to use it so I turned it on
and behold, it wanted password that I forgot. I live nowhere near a Sprint store so I started
using internet.
The message from Alexxxx saved the day.
Thanks Alexxxx and XDA Forum
Mad_DoggKK said:
I want to thank Alexxxx for the info on entering recovery mode.
I had encrypted my other G2 cuz I never used it but wanted to use it so I turned it on
and behold, it wanted password that I forgot. I live nowhere near a Sprint store so I started
using internet.
The message from Alexxxx saved the day.
Thanks Alexxxx and XDA Forum
Click to expand...
Click to collapse
that's great but you should have quoted the post which helped you provided by alexxxx
XxZombiePikachu said:
With 20d the way to enter recovery changed and instead after lg logo you have to hold the volume down+up don't touch power
Sent from my Potato powered G2 D800
Click to expand...
Click to collapse
Thanks alot i figuried it out
same problem
Hi guys,
I have the same exact problem, restored my rom with LG Flash tool 2014, but now it's always asking me this pin/password. And I tried all combinations with volume up/down and it's impossible to go in recovery, what can I do? My LG G2 is a european model 32 GB
this is the screen I'm always getting
Same Problem Here
Hi,
I'm having the same problem.
I have an LG D802. I was on CloudyG3 with TWRP recovery. While using the phone, I noticed a yellow tinge in the right side of the LCD. So I figured, I'll show it to the service center and get the issue sorted out. Obviously, I couldn't take it there rooted and on a custom ROM as they would annul my warranty otherwise. So I decided to unroot it using the LG tools. (I have done this before too. But I did not face any such problem back then).
This time, it is taking me to the screen and asking me to enter a pin/password to decrypt.
I tried booting into recovery using the old method (volume_down + power and LG logo flashes, release and press power again, then 3 times power) and also tried another method as recommended by someone above (volume_down + power till LG logo appears and then release power and press volume_up). None of them work now. In the first method, the screen just goes blank for a few seconds and the phone reboots while in the second method, the phone boots into safe mode.
Kindly advise on what to do. I am stuck and my warranty expires on the 18th of November.
Problem Solved
Earlier when I was using the Flash.Tool.1.0.54, it wouldn't ask for region and language in the pop-up. It would just open the LG Mobile Support Tool and then I manually selected the Start Upgrade button to flash the phone. The problem with this was that on boot it would ask for pin/password. I couldn't even boot into the stock recovery for some reason.
Then I used the LG Flash tool 2014: http://forum.xda-developers.com/showthread.php?t=2470207
There was a region and language pop up and it proceeded to install the firmware.
But on boot, it still asked for the pin/password. So I tried to boot into recovery and it worked this time! Pressed the power button 3 times and it wiped my phone.
On reboot, the phone worked perfectly without asking for the pin/password. But, now it was reading my internal storage as only 16GB. I followed the directions in the link provided by @Alexxxx to repartition the internal storage in my phone. Here is the link once again: http://forum.xda-developers.com/showthread.php?t=2470207
It worked perfectly for me.
imranmerchant said:
Earlier when I was using the Flash.Tool.1.0.54, it wouldn't ask for region and language in the pop-up. It would just open the LG Mobile Support Tool and then I manually selected the Start Upgrade button to flash the phone. The problem with this was that on boot it would ask for pin/password. I couldn't even boot into the stock recovery for some reason.
Then I used the LG Flash tool 2014: http://forum.xda-developers.com/showthread.php?t=2470207
There was a region and language pop up and it proceeded to install the firmware.
But on boot, it still asked for the pin/password. So I tried to boot into and it worked this time! Pressed the power button 3 times and it wiped my phone.
On reboot, the phone worked perfectly without asking for the pin/password. But, now it was reading my internal storage as only 16GB. I followed the directions in the link provided by @Alexxxx to repartition the internal storage in my phone. Here is the link once again: http://forum.xda-developers.com/showthread.php?t=2470207
It worked perfectly for me.
Click to expand...
Click to collapse
bro idont understand "boot into press power button 3 times "
magndo said:
bro idont understand "boot into press power button 3 times "
Click to expand...
Click to collapse
Sorry, that was a typo.
*So I tried to boot into recovery and it worked this time! Pressed the power button 3 times and it wiped my phone.
What I meant is, that I tried booting into recovery. from there it asked me to press the power button three times to wipe my phone.
Sorry for the late reply.
imranmerchant said:
Hi,
I'm having the same problem.
I have an LG D802. I was on CloudyG3 with TWRP recovery. While using the phone, I noticed a yellow tinge in the right side of the LCD. So I figured, I'll show it to the service center and get the issue sorted out. Obviously, I couldn't take it there rooted and on a custom ROM as they would annul my warranty otherwise. So I decided to unroot it using the LG tools. (I have done this before too. But I did not face any such problem back then).
This time, it is taking me to the screen and asking me to enter a pin/password to decrypt.
I tried booting into recovery using the old method (volume_down + power and LG logo flashes, release and press power again, then 3 times power) and also tried another method as recommended by someone above (volume_down + power till LG logo appears and then release power and press volume_up). None of them work now. In the first method, the screen just goes blank for a few seconds and the phone reboots while in the second method, the phone boots into safe mode.
Kindly advise on what to do. I am stuck and my warranty expires on the 18th of November.
Click to expand...
Click to collapse
Hi guys help me .....firstly I accidentallydeleted my stockRom and I had twrp recovery runningcloudyRom but I tried. To get my stockRom back by using LG united driver the stock was flashed successfully but it says pin or password decrypt.........help me plz
Hi, I'm stuck in the same situation. I've managed to flash the same stock rom (D80220H), and thanks to that managed to enter in recovery. Wiped data/recovera and the cache partition (see attached image) numerous times, but still get the error...
Any help with that?
I having a similar problem with a LG G3, but in my case I can flash AOSP roms like CM or Blisspop, but if I try to flash MIUI or any kind of stock rom (even the customizeds like CloudyG3) I stop in a screen asking for PIN, anyone knows how to solve it?
hi
flipeicl said:
I having a similar problem with a LG G3, but in my case I can flash AOSP roms like CM or Blisspop, but if I try to flash MIUI or any kind of stock rom (even the customizeds like CloudyG3) I stop in a screen asking for PIN, anyone knows how to solve it?
Click to expand...
Click to collapse
i have same problem on my lg g3 D850
can you help me? you solved your error: enter pin/password to decrypt
1986rom said:
i have same problem on my lg g3 D850
can you help me? you solved your error: enter pin/password to decrypt
Click to expand...
Click to collapse
No, I can't find nothing about it in the internet and no one here in XDA talking about it.
flipeicl said:
No, I can't find nothing about it in the internet and no one here in XDA talking about it.
Click to expand...
Click to collapse
you try download some recovery files from other phone and put it on sd card and then recovery from your device? i think it must help, but i cant go recovery mode from my device, i am newbie on lg bootloader, other devices what i have i easy go in recovery mode but on lg when i try to go recovery mode it only asking me erase all data, when i erasing all data and turn on device i have same problem: enter pin/password to decrypt
1986rom said:
you try download some recovery files from other phone and put it on sd card and then recovery from your device? i think it must help, but i cant go recovery mode from my device, i am newbie on lg bootloader, other devices what i have i easy go in recovery mode but on lg when i try to go recovery mode it only asking me erase all data, when i erasing all data and turn on device i have same problem: enter pin/password to decrypt
Click to expand...
Click to collapse
Recovery files from other phones?
Hello fellow people...
So, my lovely Android (LG P700) is stuck in a bootloop. So, here's the story of my phone:
1) I bought it and eventually managed to root it.
2) The same day I installed CyanogenMod 10. Everything worked so fine.
3) Later I upgraded to KitKat prime (Based on CM11). Pretty darn fine, but it was laggy like hell.
4) So I decided to downgrade back to CM10. It worked, BUT THEN - it ignored my SIM card completely and when dialed *#06# I found that my IMEI got torn off my phone.
5) So I installed AOKP KitKat. Was REALLY good but it didn't have some crucial-to-me options, so I found somewhat tasty...
6) And I installed the Pac-Man ROM. And something went quite wrong, because it only booted every third time, else it gave black screen, but everything worked really fine. But later, I noticed that Wi-Fi won't turn on, so guess what...
7) AND WHAM! MY WORST MISTAKE! Wait for it... I decided to install the Phenom kernel (Idiot me, it was made for CM10...), TADAA!
8) After the LG icon it gave me 3 random stripes distorted and pink in color. And the recovery is nothing but black screen.
9) So I tried to flash rooted v20d kdz to it... Nope. Only stuck on stock boot animation and the three button combo won't work, no recovery, no black screen, no data wipe option.
10) I used the official KDZ updater... Same sh* as 9).
11) Tried flashing rooted v10k... NOPE, the flasher is throwing the error: WParam: 4, IPARAM:1002.
NOTICE - Yes, I did data/cache/dalvik/system wipes everytime when I upgraded my ROM/changed kernels. I also used GApps every time.
Anyone can help me?
Thanks in advance!
My solution
Jakemeow said:
Hello fellow people...
So, my lovely Android (LG P700) is stuck in a bootloop. So, here's the story of my phone:
1) I bought it and eventually managed to root it.
2) The same day I installed CyanogenMod 10. Everything worked so fine.
3) Later I upgraded to KitKat prime (Based on CM11). Pretty darn fine, but it was laggy like hell.
4) So I decided to downgrade back to CM10. It worked, BUT THEN - it ignored my SIM card completely and when dialed *#06# I found that my IMEI got torn off my phone.
5) So I installed AOKP KitKat. Was REALLY good but it didn't have some crucial-to-me options, so I found somewhat tasty...
6) And I installed the Pac-Man ROM. And something went quite wrong, because it only booted every third time, else it gave black screen, but everything worked really fine. But later, I noticed that Wi-Fi won't turn on, so guess what...
7) I decided to install the Phenom kernel (Idiot me, it was made for CM10...)
8) After the LG icon it gave me 3 random stripes distorted and pink in color. And the recovery is nothing but black screen.
9) So I tried to flash rooted v20d kdz to it... Nope. Only stuck on stock boot animation and the three button combo won't work, no recovery, no black screen, no data wipe option.
10) I used the official KDZ updater... Same sh* as 9).
11) Tried flashing rooted v10k... NOPE, the flasher is throwing the error: WParam: 4, IPARAM:1002.
NOTICE - Yes, I did data/cache/dalvik/system wipes everytime when I upgraded my ROM/changed kernels. I also used GApps every time.
Anyone can help me?
Thanks in advance!
Click to expand...
Click to collapse
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CMW (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a lparam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When capacitive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CMW succesfully!
Use CPA rom for p700/005 this time, it bugless and remember to factory data reset.
Hope it helps you!
mandeepsingh said:
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CWM (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a IParam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When captive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CWM successfully!
Use CPA ROM for p700/705 this time, it bugless and remember to factory data reset.
Hope it helps you!
Click to expand...
Click to collapse
Thanks a lot, but... recovery won't turn on, everytime I try to push vol-/menu/power button combo nothing happens and the phone tries to boot up as it would normally leaving it in an infinite bootscreen... Btw, my home button is broken and the vol- button is brokenish and I need a few tries to press it normally AND the captive button lights, well... they won't turn on anytime, just dark touch-able areas and that's all. I'll try to get to recovery though.
EDIT: BTW, you sure it's DIAG not EMERGENCY?
mandeepsingh said:
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CMW (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a lparam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When capacitive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CMW succesfully!
Use CPA rom for p700/005 this time, it bugless and remember to factory data reset.
Hope it helps you!
Click to expand...
Click to collapse
Hey, it worked! Thanks, I managed to get to recovery! *Psst, admin, you can lock this thread or whatsoever*
Happy to help You!!!
Jakemeow said:
Hey, it worked! Thanks, I managed to get to recovery! *Psst, admin, you can lock this thread or whatsoever*
Click to expand...
Click to collapse
Lol I thought its just me whose home button and volume- button isn't working!!!!! But I pressed the button hard and it went into recovery!!!!! Glad to help you!!!! ENjoy!!!!!
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
7Potters said:
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
Click to expand...
Click to collapse
try SKRTOOLS click on my signature and go into tools sections .