Database Users

QC BQS Ana*lyser 3.0 - Universal QC Tool

Hi there boys and girls ... for those interested ....
QC BQS Ana*lyzer 3.0
What is it ?
-----------
Let's call it the ultimate BQS / QC swiss knife and very special Crypto Tool (RSA Signature Calc can be used for any mobile):
BQS only :
----------
1. Load AMSS to extract files or useful infos
(EF81, E81C, EF91, SXG75, EF82, SF71, SL91, M7 or similiar ones)
Features :
Extract Infos from AMSS : USBID, Product.Nr., SVN, SwBuild, Mobiletype
Extract internal filesystem (mif,bar,sig etc. files)
Extract certificates
Extract all BMPs,GIFs,PNGs, JPGs
Extract AMSS signature bytes (if production key)
Show all file references used by mobile
2. Sim_Secure extraction/decryption (non-public)
3. Master-/Usercode/Unlock extraction and direct unlock (non-public)
All QC :
--------
1. Load Partition File to get overview about NAND/NOR structure
2. Make usage of QCs Diag Interface .... to do nice things
(Useful for any QC mobile in the world)
Standard Features :
-------------------
- Send standard diag commands or any hexadecimal command you want (database included)
- Read out all NVItems (range given)
(all that exist, more than QPST normally extracts)
- Backup and Restore all NVItems
- Read out and Dump Firmware in Memory (IRam)
- Read out complete EFS
- Switch to FTM Mode (or anything else you want)
- Get infos about phone ..... etc ..... a lot more functions
- Generate SimSecure Command to write to SimSecure using given file (may brick your phone when used without knowledge)
Bootloader / DownloadMode Features :
-------------------------------------
- Load any file to mobile at any address and execute (bootloader f.e.)
- Read out complete NAND Memory using bootloader (range given) with included MSM6250/A bootloader or any given bootloader
Usage : Take out battery, put in battery, press ON # to enter emergency mode, Execute Loader
or (with SL91,SF71 f.e.) enable FTM mode, Execute Loader
- Use any Download Mode or Bootloader Command to experiment
- Read application memory of newer Diag Ver 6 in Download Mode
- Show complete infos about used NAND after loading of Bootloader
Flasher Features :
-----------------
Flash any QC mobile (OBL Multiboot) with given bootloader
- Flash PBL (dangerous), QCSBL, QCSBL Header and Config Bits, Partition, OEMSBL, OEMSBL Header, AMSS, AMSS Header and EFS
3. Crypto Function :
-----------------
- Calculate CRC-30, SHA1 and MD4 of any file
- Bruteforce bytes to fit CRC-30 needed when qcsblhd_cfgdata.mbn was edited
- Decrypt any RSA-Message, including ASN-1 / SHA Signatures.
- Check firmware signature given Modulus and Exponent
4. Sim_Secure extraction/decryption (non-public)
5. Full Feature JTAG Interface (non-public)
Although it is still a bit buggy and things have to be speeded up ...
it is the successor of AMSS Analyzer .... but more reliable and even much faster
Planned in future :
-----------------
1. Bugfixes
2. Tooltips showing real addresses in graphical window
3. EFS2 Directory Browsing
4. Elimination of extracted files in amss.mbn for better understanding
5. Simple NVItems Editor
6. Porting NVM hack already working with JTAG to COM/USB
7. AMSS signature hack, Exploit for Signature (this will be a tough task)
8. Read out SMS / Addressbook via Diag Interface
NO UNLOCKING ! PLEASE DO NOT REQUEST. THIS PROJECT IS FOR EDUCATIONAL PURPOSES ONLY, NOT TO HARM COMPANIES FOR THEIR EFFORTS.
What we need :
----------------
- Any contribution to the project is welcome.
- Donations for new hardware and software for further development of this tool.
- We need support in programming and documentation XD
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list
Cya and keep on reversing,
Viper BJK
For full source, see project homepage.
If you think my tool is useful and you would like to donate some money for further development, feel free to do so :
http://viperbjk.beepworld.de/

great stuff, I admire your work, this has been used to partially unbrick a htc titan (work in progress still, as it crashes on some bit of code in init god knows why).

Hi.
New Version supports MSM7200.
Maybe take an look.
Code:
New version 3.42 out
--------------------
What's new ?
-------------
- Find public keys in HTC SPL.nb via Cryptosearch
- Added Public Keys for [B]HTC[/B] Firmware (Diamond, Kaiser, Raphael)
- Exponent bugfixes
- New RSA Decryption interface
Feedback are welcome.
Thanx.
Best Regards

Forbidden
Your client does not have permission to get URL /p/qcbqsanalyzer/downloads/list from this server.
bad link
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list

Does this software works on new phones, or is there any similar software?

[INFO] Latest Flashtool 0.9.11.0 for ALL XPERIA (Windows)

Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Updated on 12/06/2013 ©2011 by Androxyde
More information at http://androxyde.github.com/
Flashtool Release Notes:
* 0.9.11
This version is a big split with every previous ones.
And not fully featured as previous can be.
I changed the UI framework from Swing to SWT because of a better integration with Mac UI.
Here is what is missing from previous releases :
- No multilingual UI
- No recovery installer
- No kernel installer (for 2010 devices)
- No ROM cleaner.
- Cannot Add/Edit/Remove devices.
No TA hex editor (in pro mode)
Version fully compatible with all 2013 devices (Z/ZL/Tablet Z etc etc)
Unified Bootloader unlock feature with the new BLU icon. No more unlock plugin.
As for flashing, BLU is available even without any connected device, even with
unrecognized devices.
Updated SuperSU package. Added servicemnu root hack
(works with Z/ZL for all FW up to .434)
Known working for Xperia T/V too
Added TA partition backup/restore. Using this feature, you can backup TA before unlock.
Restore TA will relock the devicee and get DRM back as well as BE2
(full complete relock). You cannot count on this feature if ever your device is
already unlocked. Missuse of this feature can brick the device
Introduction to Flashtool:
Flashtool is a flashing software that can be used to :
1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice)
(Be careful, unless you really know what you do, do not modify the default list.
This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2)
(Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the
Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
Download Link
MOD EDIT: Not authorized mirror links.
MD
HIT THANKS BUTTON IF IT HELPED

This is not yours, and you are unable to support it. Moving this to General.

I'm pretty sure the devs of flashtool don't want it mirrored.
Sent from my Xperia Tablet Z using xda developers app

Thread Closed
As this is an info post to somebody elses work, the following actions have been taken.
1. Mirror download link removed.
2. Thread is closed as there is no need to post replies.
MD

[FTF] Xperia Z2 SO-03F 17.1.B.0.318 / 17.1.1.B.2.73

Device
Xperia Z2 | SO-03F
Firmware Version
17.1.B.0.318
Brand
NTT docomo
CDA
1285-3256
Download
Mega (Mirror) (Mirror2)
* UPDATED *
Firmware Version
17.1.1.B.2.73
Download
Mega (Mirror) (Mirror2)

RyokoN said:
Device
Xperia Z2 | SO-03F
Firmware Version
17.1.B.0.318
Brand
NTT docomo
CDA
1285-3256
Download
Mega (Mirror)
Click to expand...
Click to collapse
do you happen to know the firmware differences between D6503/2 and SO-03f?
im tempted to flash Docomo Z2 rom to my Z2 but im quite sure it'll brick :/

Envious_Data said:
do you happen to know the firmware differences between D6503/2 and SO-03f?
im tempted to flash Docomo Z2 rom to my Z2 but im quite sure it'll brick :/
Click to expand...
Click to collapse
I believe D6502 doesnt have lte/4g.

Envious_Data said:
do you happen to know the firmware differences between D6503/2 and SO-03f?
im tempted to flash Docomo Z2 rom to my Z2 but im quite sure it'll brick :/
Click to expand...
Click to collapse
SO-03F firmware is for NTT docomo (bloated) and contains color emoji font for docomo.
You can't flash SO-03F FTF directly to D65xx because error will be occurred when you flash system.sin.

RyokoN said:
SO-03F firmware is for NTT docomo (bloated) and contains color emoji font for docomo.
You can't flash SO-03F FTF directly to D65xx because error will be occurred when you flash system.sin.
Click to expand...
Click to collapse
No i was planing on pulling files and making a flashable zip
See about that, or even just ovrlaying on a D6503 rom
Sent from my D6503 using XDA Premium 4 mobile app

QUOTE=kamalaggi;53363455]I believe D6502 doesnt have lte/4g.[/QUOTE]
That's not true at all. I currently have a Xperia Z2 and I'm connected through 4G/LTE.

Envious_Data said:
No i was planing on pulling files and making a flashable zip
See about that, or even just ovrlaying on a D6503 rom
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it's OK since some SO-03F users are making and using D6503 zip
[NUT]'s DIY Guide will be helpful.

how can i update my docomo z2? pc companion keep sayin the sony has no fw for this phone. its an japanes z2 so-0f3 i cant get to update it,
since my friend has forgott the unlock pattern we cant get into it tryed with sony flash software and pc companion but no luck... can some one help?

badde83 said:
how can i update my docomo z2? pc companion keep sayin the sony has no fw for this phone. its an japanes z2 so-0f3 i cant get to update it,
since my friend has forgott the unlock pattern we cant get into it tryed with sony flash software and pc companion but no luck... can some one help?
Click to expand...
Click to collapse
You can download a FTF for SO-0F and use flashtool to flash it, make sure to exclude the data

Envious_Data said:
You can download a FTF for SO-0F and use flashtool to flash it, make sure to exclude the data
Click to expand...
Click to collapse
download ftf? im not so into this computer things but u mean downloading from an ftf server right?
i have downloaded fw from here too but not working
getting this:
10/053/2014 20:53:49 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 23.0.1.A.0.167. Customization : Generic RO
10/053/2014 20:53:49 - INFO - Preparing files for flashing
10/055/2014 20:55:37 - INFO - Please connect your device into flashmode.
10/055/2014 20:55:38 - INFO - Opening device for R/W
10/055/2014 20:55:38 - INFO - Reading device information
10/055/2014 20:55:38 - INFO - Unable to read from phone after having opened it.
10/055/2014 20:55:38 - INFO - trying to continue anyway
10/055/2014 20:55:38 - INFO - Start Flashing
10/055/2014 20:55:38 - INFO - Processing loader.sin
10/055/2014 20:55:38 - INFO - Checking header
10/055/2014 20:55:38 - ERROR - Processing of loader.sin finished with errors.
10/055/2014 20:55:38 - INFO - Ending flash session
10/055/2014 20:55:38 - ERROR - Error in processHeader : 6 : The handle is invalid.
10/055/2014 20:55:38 - ERROR - Error flashing. Aborted
the other fw:
10/055/2014 20:55:39 - INFO - Device connected in flash mode
10/055/2014 20:55:52 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 23.0.1.A.0.167. Customization : Customized_NCB
10/055/2014 20:55:52 - INFO - Preparing files for flashing
10/057/2014 20:57:33 - INFO - Please connect your device into flashmode.
10/057/2014 20:57:34 - INFO - Opening device for R/W
10/057/2014 20:57:34 - INFO - Reading device information
10/057/2014 20:57:34 - INFO - Unable to read from phone after having opened it.
10/057/2014 20:57:34 - INFO - trying to continue anyway
10/057/2014 20:57:34 - INFO - Start Flashing
10/057/2014 20:57:34 - INFO - Processing loader.sin
10/057/2014 20:57:34 - INFO - Checking header
10/057/2014 20:57:34 - ERROR - Processing of loader.sin finished with errors.
10/057/2014 20:57:34 - INFO - Ending flash session
10/057/2014 20:57:35 - ERROR - Error in processHeader : 6 : The handle is invalid.
10/057/2014 20:57:35 - ERROR - Error flashing. Aborted
the other fw:
10/007/2014 21:07:17 - INFO - Flashing data
10/007/2014 21:07:17 - INFO - Processing of cache.sin finished.
10/007/2014 21:07:17 - INFO - Processing system.sin
10/007/2014 21:07:18 - INFO - Checking header
10/007/2014 21:07:18 - INFO - Flashing data
10/007/2014 21:07:41 - ERROR - Processing of system.sin finished with errors.
10/007/2014 21:07:41 - INFO - Ending flash session
10/007/2014 21:07:41 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="80080053";

Wow I just realized that this is an old thread brought back up lol, I thought it was a new thread and had reported it since theres a mega thread for posting of files. Wow I guess its time for bed.

Please use the dedicated FTF sharing thread here to share FTF files
Thread closed

[ROOT] Rooting for SGP611 with giefroot (Bootloader Locked)

WARNING: This instruction may brick your device permanently. I am not
responsible for any your loss or damage.
The following is the instruction to get root for SGP611 with giefroot(http://forum.xda-developers.com/crossdevice-dev/sony/giefroot-rooting-tool-cve-2014-4322-t3011598)
Requirement:
Bootloader Locked Z3 Tablet Compact Wi-Fi 16GB (SGP611)
D6603(Generic GLOBAL 23.0.A.2.93) firmware (You can got it from XperiFirm)
Flashtool
Install driver included in Flashtool
Patched version of giefroot_v3 (View attachment giefroot_v3_sgp611_fix1.zip)
Download:
View attachment giefroot_v3_sgp611_fix1.zip
Small Instruction:
1.Backup
2.Flash SGP611 firmware (23.0.1.A.0.167) if other version is installed
3.Flash D6603 system partition (23.0.A.2.93)
4.Enable [USB Debug] and [mock locations] and [Unknown Source] , then run install.bat in (View attachment giefroot_v3_sgp611_fix1.zip)
5.You got root!
6.Backup TA, Back to SGP611 firmware
Instruction:
1. Backup all your data (including application data and internal storage)
2. Get SGP611(23.0.1.A.0.167) firmware
3. Get D6603 firmware(Generic GLOBAL 23.0.A.2.93 ftf) from somewhere
4. If firmware version of your device is not 23.0.1.A.0.167, then flash all
contents of ftf to back to 23.0.1.A.0.167
(Start Flashtool and click "flash device", then choose "Flashmode".
On "Firmware Selector" select SGP611 firmware.
Uncheck APPSLOG, CACHE, DATA in Wipe menu.
Check all checkbox in Exclude menu.
Unckeck KERNEL in Exclude menu.
Then click Flash button.
Shutdown your device and connect USB on holding volume down.
Wait 20minute or more to finish.
)
5. Flash only system partition of D6603 (23.0.A.2.93)
(Open "Firmware Selector" with same instruction above.
select D6603 firmware.
Uncheck APPSLOG, CACHE, DATA in Wipe menu.
Check all checkbox in Exclude menu.
Unckeck SYSTEM in Exclude menu.
Then click Flash button.
And flash with same instruction above.
)
6. Power on your device, then enable [USB Debugging] and [Allow mock
locations] in Developer options. And enable [Unknown sources] in Security
setting.
Added:
Disable [Verify apps over USB] in Developer options, and disable [Verify apps] in Security setting.
Thanks kvi!
7. Install usb driver included in Flashtool
8. Download giefroot_v3_sgp611.zip and extract zip
9. Run install.bat in extracted folder, then wait for about 1minute
10. You got root!
11. Backup TA
12. Restore stock firmware by following insruction of this thread http://forum.xda-developers.com/z3-...-to-rooted-stock-sgp621-firmware-drm-t3015494
(replace SGP621 to SGP611 in the instruction)
Thanks to zxz0O0 for giefroot and some other tools.
zxz0O0 spend so much time to make giefroot work on SGP611 kernel.
Thanks to lowtraxx for root instruction for SGP621.
(http://forum.xda-developers.com/z3-...t/root-root-locked-bootloader-sgp621-t3013534)
Thanks to CubicU07 for instruction to restore stock firmware.
The old version (giefroot_v3_sgp611.zip) does not work.
Please try new version (View attachment giefroot_v3_sgp611_fix1.zip).
I'm sorry.

For me its not working:
Got a Z3TC 16GB WIFI, installed the Z3TC ftf, then flashed the system from the Z3, then used the tool but always get a device not rooted error

moritz31 said:
For me its not working:
Got a Z3TC 16GB WIFI, installed the Z3TC ftf, then flashed the system from the Z3, then used the tool but always get a device not rooted error
Click to expand...
Click to collapse
It may not succeed in one time.
Plaese try again 3 or 4 or more times.
If you still fails, please let's me know results of commands below.
Code:
adb shell cat /data/local/tmp/giefrootlog
adb shell cat /data/getrootlog
adb shell ls -l /data/local/tmp/scsi_wait_scan.ko

rurie said:
It may not succeed in one time.
Plaese try again 3 or 4 or more times.
If you still fails, please let's me know results of commands below.
Code:
adb shell cat /data/local/tmp/giefrootlog
adb shell cat /data/getrootlog
adb shell ls -l /data/local/tmp/scsi_wait_scan.ko
Click to expand...
Click to collapse
hey, i got it the problem seems to be on one site windows10,
on my mac i had to unplug replug the device after reboot before pressing continue

I noticed a mistake.
I fixed and upload again. (giefroot_v3_sgp611_fix1.zip)
Please try new file.
This file fixes both exploit itself and install.sh(for Linux/OS X).

rooted OK disabling all options for check/verify apps ! (1 option in security + 1 option in Developer options) , Backup TA OK
TA restored on rooted stock firmware , drm keys OK
Thx!

kvi said:
rooted OK disabling all options for check/verify apps ! (1 option in security + 1 option in Developer options) , Backup TA OK
TA restored on rooted stock firmware , drm keys OK
Thx!
Click to expand...
Click to collapse
Thanks for confirming

kvi said:
rooted OK disabling all options for check/verify apps ! (1 option in security + 1 option in Developer options) , Backup TA OK
TA restored on rooted stock firmware , drm keys OK
Thx!
Click to expand...
Click to collapse
Thank you for reporting and information!
I added your information to the instruction.

FtF global z3 or z3 tablet?
edited:
I was asking if need to build de ftf firmw using z3 as device or z3 tablet, but It works with z3
Works for me, actually running stock android with root and TA partition restored.
THANKS A MIL!

I do not speak English, I use google translator
Do not know which section you mean, 5 or 12. If I did 5 you see in this picture
http: // oi59.tinypic.com / 2my85qc.jpg

Root with the bootloader intact, that is amazing! Will this also work on the WiFi 4G version? That's the one I have and I don't want to mess it up.

Angelusz said:
Root with the bootloader intact, that is amazing! Will this also work on the WiFi 4G version? That's the one I have and I don't want to mess it up.
Click to expand...
Click to collapse
Just scroll one line up in general forum you have the post for the SGP621 (LTE version) here
enjoy!

Oh, I missed that one, thanks!

Does it void warranty? As the DRM keys and still there and how to do you restore the DRM keys

Copy apps in SDcard.
If you already gained root access, can you copy all apps to SDcard? What apps you guys recommend? Thanks in advance.

Does this method erase all data in internal card?

Has anyone got this working with SGP612 yet? (32gb Wifi only version). I have't seen this mentioned anywhere, but it should be similar to SGP611?

I'm a bit confused at step 12 : first thing to do when following CubicU07 instructions is to follow ... lowtraxx instructions...
If we follow CubicU07 thread, we first have to back up TA, but that was step 11 of this current thread. sso I guess we should follow lowtraxx instructions, but this one specifies that it won't work for SGP611, and sends us to this thread. Back to square one, then.
My guess is that we have to follow CubicU07 thread, no matter what he says first (so, I won't follow lowtraxx instructions).
Could you please be more specific for step 12 ? Do we finally have to use Advanced stock kernel, PRFCreator, SonyRICDefeat, ... as described in CubicU07 thread (which also involves unlocking BL) ?
Thank you.

Where can I get the firmware from step 3?

It's written : install XperiFirm and download it with this software.

Success flashtool to flash Global Firmware on my G8232 ! Guide for newbiew (like me)

I got this G8232 as Gift from my USA's cousin which has disable fingerprint manager by default. This issue make me sick. I want it back by flash my phone to global firmware. But problem:
1. Flashtool newest version have no G8232 in device list. Okay if you stuck at this here is trick:
Download Device update for flastool here:
https://forum.xda-developers.com/xzs/how-to/flashtool-devices-update-t3601722
- Extract you will have folder G82xx
Open flashtool (newest version) wait until it loaded all script you will see there are only 94 device loaded
see pic:
how do you upload pictures
- Copy folder: G82xx to %userprofile%\.flashTool\devices (copy this to "RUN")
- Back to opening flashtool click: Device - Manage - Import. You will have 95 devices imported with notice:
"06/039/2017 21:39:25 - INFO - Loading devices database
06/039/2017 21:39:25 - INFO - Loaded 95 devices"
how do you upload pictures
2. All done ! Go ahead make your own ftf firmware by xperifirm and flash your phone.
3. While flashing you may got notice:
06/040/2017 21:40:46 - INFO - No matching loader found
06/040/2017 21:40:46 - WARN - No loader found or set manually. Skipping loader
And flashtool will popup using 41.fsc click YES then all go through.... (if not restart your PC reinstall flashtool drivers and restart over again)
how do you upload pictures
Bravo now my G8232 fingerprint manager is back ! Big thanks everybody !

Thanks, which FW did you use?
Thanks for the quick and easy guide. Very helpful and I have successfully created an FTF file as a test. Just curious which firmware you used? I'm looking for something that has as little bloat as possible but understand each variant will come with some.
Example, did you use the customized SG, HK, etc. release?
Thanks in advance!

Avalanche46 said:
Thanks for the quick and easy guide. Very helpful and I have successfully created an FTF file as a test. Just curious which firmware you used? I'm looking for something that has as little bloat as possible but understand each variant will come with some.
Example, did you use the customized SG, HK, etc. release?
Thanks in advance!
Click to expand...
Click to collapse
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host

XuanDinh said:
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host
Click to expand...
Click to collapse
Giúp mình với. XZs k nhận driver để flash TFT. mình tìm đủ các driver rồi mà đều báo fail khi add driver (

Only get this:
29/004/2017 23:04:06 - INFO - No flash script found.
29/004/2017 23:04:06 - INFO - Flash script is mandatory. Closing session
29/004/2017 23:04:06 - INFO - Ending flash session
29/004/2017 23:04:06 - INFO - Flashing finished.
29/004/2017 23:04:06 - INFO - Please unplug and start your phone
29/004/2017 23:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
29/004/2017 23:04:06 - INFO - Device connected in flash mode
29/004/2017 23:04:12 - INFO - Device disconnected

Janus00 said:
Only get this:
29/004/2017 23:04:06 - INFO - No flash script found.
29/004/2017 23:04:06 - INFO - Flash script is mandatory. Closing session
29/004/2017 23:04:06 - INFO - Ending flash session
29/004/2017 23:04:06 - INFO - Flashing finished.
29/004/2017 23:04:06 - INFO - Please unplug and start your phone
29/004/2017 23:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
29/004/2017 23:04:06 - INFO - Device connected in flash mode
29/004/2017 23:04:12 - INFO - Device disconnected
Click to expand...
Click to collapse
same for me also

3mozz said:
same for me also
Click to expand...
Click to collapse
Another user in the patch thread solved it. You have to copy the G82XX patch to the device folder to overwrite the files and then press export first before importing the folder in flashtool.
"Delete that folder add the new folder then click export and then import the new folder and tadaa worked for me"

Hi guys. I have a question. So I have the US dual sim version as well. If I flash to global firmware do I lose my DRM keys for the camera?
Basically all I want to do is use global firmware to get fingerprint reader working. I don't really care for rooting it. I want to keep my camera DRM working. I tried reading a guide but it only shows me how to root. But I don't want to root.

How to video
I made a how to video a few weeks back on how to activate the fingerprint sensor.
I was having issues like the ones mentioned above and after several failed attempts I figured out what worked
This damn thing doesn't let me post links so just Google how to activate the fingerprint sensor on the Xperia xzs or just search for my channel using my username on YouTube

can you help me sir plz
contact me on my Gmail
[email protected]
i don't know how to do this method ?!

Does your phone keep receiving automatic updates from sony?
Does your phone keep receiving automatic updates from sony?

Please upload Sony Xperia XZs Global Firmware

XuanDinh said:
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host
Click to expand...
Click to collapse
could you help me sir to do this?

skipper1448 said:
How to video
I made a how to video a few weeks back on how to activate the fingerprint sensor.
I was having issues like the ones mentioned above and after several failed attempts I figured out what worked
This damn thing doesn't let me post links so just Google how to activate the fingerprint sensor on the Xperia xzs or just search for my channel using my username on YouTube
Click to expand...
Click to collapse
what is your username on youtube?

Shadow_Company said:
what is your username on youtube?
Click to expand...
Click to collapse
I deleted the video a while ago. It's a 6 year old phone at this point.

skipper1448 said:
I deleted the video a while ago. It's a 6 year old phone at this point.
Click to expand...
Click to collapse
could you contact me to provide help?
[email protected]