Hello Everyone,
I have a big problem, my new Yotaphone 2 (YD206) is stuck at the startscreen. It just displays the logo "Yotaphone 2", it is not frozen however, it appears to be starting up every moment, but just stays that way.
What caused it, is that I deactivated and activated Google Launcher 3, after that it crashed, and from that moment on it is stuck at the startscreen. I tried to hard reset it by holding volume up and power button, but there's no reaction.
I'd be very thankfull for any hint or advice what to do.
How long it will reboot itself? Just try hold power up or power down only. Hope when it self reboot, it will enter recovery or downloading mode.
If you're sure that you reactivated Launcher3 again, it should work. Go to recovery (power & vol up) and delete cache. If in this way it doesn't boot, I think you've to go to recovery again and install a third party launcher using an .apk from PC and pushing it with adb. I don't know if it will work, but it is the only thing I can think of before telling you that you have to do a factory reset wiping your data.
Related
Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.
My daughters Nexus 10 has recently stopped working. Every time we turn it on the Google Logo appears and then the android balls spinning logo appears, but at that point the tablet reboots back to the Google Logo.
So far I've pressed Power + Vol Up + Vol Down and chose recovery mode. This then reboots and I get a android image with the words 'No Command' - I managed to get out of that I think by Power and Vol Up to get into the recovery mode. I chose wipe cache partition and rebooted but the tablet still goes back into a loop when booting. I then went back into the recovery mode and chose wipe data / factory reset. Again it goes back into the boot up loop. But now all I can do is press Power + Vol Up + Vol Down which gets me to an android image with the words 'Downloading - do not turn off target!'
Any ideas? Ideally I'd like to get the tablet back to a factory image so I can sell it. I've already wiped my tablet and given it to my daughter to stop her from moaning!!
Thanks
skyking_comms said:
My daughters Nexus 10 has recently stopped working. Every time we turn it on the Google Logo appears and then the android balls spinning logo appears, but at that point the tablet reboots back to the Google Logo.
So far I've pressed Power + Vol Up + Vol Down and chose recovery mode. This then reboots and I get a android image with the words 'No Command' - I managed to get out of that I think by Power and Vol Up to get into the recovery mode. I chose wipe cache partition and rebooted but the tablet still goes back into a loop when booting. I then went back into the recovery mode and chose wipe data / factory reset. Again it goes back into the boot up loop. But now all I can do is press Power + Vol Up + Vol Down which gets me to an android image with the words 'Downloading - do not turn off target!'
Any ideas? Ideally I'd like to get the tablet back to a factory image so I can sell it. I've already wiped my tablet and given it to my daughter to stop her from moaning!!
Thanks
Click to expand...
Click to collapse
Have you tried using the factory images from Google and resetting it that way. A factory reset in the stock recovery won't do much except wipe the data, apps, etc. If theres something wrong with the system, that won't fix it. That's where the factory images come in.
So I just finished unrooting my device via kingoroot (I've done it a 3 times and they were all fine) and I just hold my power button to restart device. However, it never stops restarting. The animation of the logo is still playing with blue sparkles coming in and out.
I took the battery out and and put it back in. I powered it by pressing the power button, home button, and volume up button and I wipe cache partition and wipe data/factory reset, and then i reboot system, but I'm still stuck in logo animation still going on. Any help? (Also, please use simple everyday language because I'm kind of a tech noob so I won't understand if you're using abbreviations/unfamilliar terms, first time posting here)
andrewlay said:
So I just finished unrooting my device via kingoroot (I've done it a 3 times and they were all fine) and I just hold my power button to restart device. However, it never stops restarting. The animation of the logo is still playing with blue sparkles coming in and out.
I took the battery out and and put it back in. I powered it by pressing the power button, home button, and volume up button and I wipe cache partition and wipe data/factory reset, and then i reboot system, but I'm still stuck in logo animation still going on. Any help? (Also, please use simple everyday language because I'm kind of a tech noob so I won't understand if you're using abbreviations/unfamilliar terms, first time posting here)
Click to expand...
Click to collapse
Hi,
It may be possible that something got corrupted in the process of unrooting. You will have to flash your firmware in ODIN to get your device working again.
Saber.
Hello guys, been a while, but I got myself into trouble. For a while I had rooted the phone but one time I rebooted and it supposedly no longer had root. Today I got a notification that magisk updated, so I decided to try it. I booted into recovery and tried to flash. Nothing happened. I tried wiping davlik cache and tried again. What ended up happening instead was that the phone was unresponsive. I attempted to reboot, but instead I got stuck in a bootloop.
I realize the most effective way to get out of it is to flash the firmware via Odin, but since I didn't make a backup I want to avoid that if possible. The problem is that other than the soft reboot (power + volume down) I cannot power off the phone to access recovery mode! I've searched and searched, but have only found ways to soft reset, which doesn't help me access recovery mode.
Is there a way to power off the phone while stuck in a bootloop? Or, alternatively, is there a way to boot into recovery while in a bootloop?
It's so frustrating to not be able to something as simple as a battery pull since the phone is sealed. Is there a way to replicate that to be able to power it off?
Any help would be appreciated.
Hold the power button for 10 seconds.
skiptomylou11 said:
Hello guys, been a while, but I got myself into trouble. For a while I had rooted the phone but one time I rebooted and it supposedly no longer had root. Today I got a notification that magisk updated, so I decided to try it. I booted into recovery and tried to flash. Nothing happened. I tried wiping davlik cache and tried again. What ended up happening instead was that the phone was unresponsive. I attempted to reboot, but instead I got stuck in a bootloop.
I realize the most effective way to get out of it is to flash the firmware via Odin, but since I didn't make a backup I want to avoid that if possible. The problem is that other than the soft reboot (power + volume down) I cannot power off the phone to access recovery mode! I've searched and searched, but have only found ways to soft reset, which doesn't help me access recovery mode.
Is there a way to power off the phone while stuck in a bootloop? Or, alternatively, is there a way to boot into recovery while in a bootloop?
It's so frustrating to not be able to something as simple as a battery pull since the phone is sealed. Is there a way to replicate that to be able to power it off?
Any help would be appreciated.
Click to expand...
Click to collapse
Hold Vol down and power for soft reboot. As soon as the screen goes off to reboot quickly switch to recovery combo (bixby + up + power) it should boot to recovery
callumbr1 said:
Hold Vol down and power for soft reboot. As soon as the screen goes off to reboot quickly switch to recovery combo (bixby + up + power) it should boot to recovery
Click to expand...
Click to collapse
What if Vol down and power don't work, adb, fastboot and device manager don't see it, any other combinations tried too, wait for full discharge don't option. Help plz
Did you manage to get out of this?
Im really scared i bricked my phone now. Everything was working fine but after i did a normal reboot it suddenly would not start up.
Screen is black and the only way i can get a response from the phone is the soft restart (vol down + power).
I need to get into recovery somehow so i can restore my nandroid backup but vol up + bixby + power doesnt work (i assume the phone is on and frozen or something?)
I managed to fix my phone. After leaving it for 24 hours the battery was fully drained. After charging again i could boot to twrp and restore my nandroid backup.
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Dharmost said:
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Click to expand...
Click to collapse
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
D4ND310 said:
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
Click to expand...
Click to collapse
I didn't dip the smartphone into a cup of liquid, i just took a piece of cotton, poured a bit of nail pain remover (don't know the exact name in english, sorry) on it and then scratched the part where the chewing gum was on (on the soft touch back key, which works 100% fine).
I am trying using the method you described, but it seems i can't go into recovery. Maybe i'm not quick enough! will keep trying. If you have any other suggestions i will be glad to hear that!
You could try to make a USB jig, or buy one off of eBay. They're really cheap. Its basicly just a resistens that force the phone to download mode. It have worked fine for all my Sammy's including A310 so it probably works for A (15) series as well.
Just put it in USB connector and press power for a few secs and you should be in download mode.
Just an idea if everything else fails
Sent from my Honor 5X using Tapatalk
go to samsung
A hardware problem could NEVER be fixed by software ways... Unfortunatelly...
It seems that liquid made some changes on your PCB (maybe dissolved some isolators inside??)...
Anyway, go to service or replace it!
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Dharmost said:
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Click to expand...
Click to collapse
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
babyyeobo14 said:
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion, but still couldn't get into recovery. I think the home button is really broken, therefore i need to access recovery in another way.
Cause i flashed the stock samsung firmware twice with odin and i can't still start the phone properly, every guide says that a wipe of cache and dalvik solves the situation. But i need to get into recovery for that.
I can't go into recovery with normal procedure probably because the home button is not working, and all the guides about adb commands say that you need to plug in your phone when it has fully started. So i either need a way to force the device into recovery with my computer, or a firmware that once flashed doesn't give me bootloop