Hi guys
What the title says
Any ideas on what I can try?
Thanks in advance
Deleted
Trex888 said:
Did you try wipe cache & data factory reset from stock recovery after flashing stock firmware?
If factory reset did not work then You can try to flash repair firmware with pit file.
Click to expand...
Click to collapse
Hi. That's the first thing I tried, multiple times.
Where can I get the repair firmware? Any chance it can erase imei?
Thanks
Daved+ said:
Hi. That's the first thing I tried, multiple times.
Where can I get the repair firmware? Any chance it can erase imei?
Thanks
Click to expand...
Click to collapse
Go to www.tsar30000.com and download repair full firmware for your model.
It will erase imei if you choose in odin .
Just leave everything as it is in odin and flash 4 files firmware with pit file.
Don't tick in odin options nand erase all or erase imei.
Trex888 said:
Go to www.tsar30000.com and download repair full firmware for your model.
It will erase imei if you choose in odin .
Just leave everything as it is in odin and flash 4 files firmware with pit file.
Don't tick in odin options nand erase all or erase imei.
Click to expand...
Click to collapse
Okay, just saw repair file is for android 5 and this board already came updated to android 6.
Will I still be safe?
Thank you
Try emergency software recovery and initialization from smart switch, it worked for me when i had my device soft bricked...
Related
This should work with most galaxy device as I got some insight from the S3 forums.
If u get the fail message like the one in the attachment picturethen ur odin is f**ck*d up and wouldn't let u flash.So download another one compatible to ur device ie original firmware for ur device install by odin then root,install mobile odin and flash the "fail" firmware(u can later change csc to this firmware and install stock recovery for updates)!!
For "nand erase all" this was tough but once u've got it, its easy.
-First download this recovery.
-enter recovery mode and do a factory reset.Then do erase cache!
-Now reboot in download mode and flash the md5 official firmware of ur choice.(note not the one that gives u "fail" error).
-ur galaxy note boot animation may be screwed but ur device will boot eventually.
Hit thanks if this saves ur day!!
So is this for all models or just 8013/10 wifi models only?
If for specific model it might be an idea to say so or you may be causing people to brick their device...
works for all models!!But u should have a stock firmware handy for ur device!!
Bricked gt-n8010
How do I get the files from dropbox
link
You could upload the file again, I can not flash ROM Y_Y pls
hackarchive said:
This should work with most galaxy device as I got some insight from the S3 forums.
If u get the fail message like the one in the attachment picturethen ur odin is f**ck*d up and wouldn't let u flash.So download another one compatible to ur device ie original firmware for ur device install by odin then root,install mobile odin and flash the "fail" firmware(u can later change csc to this firmware and install stock recovery for updates)!!
For "nand erase all" this was tough but once u've got it, its easy.
-First download this recovery.
-enter recovery mode and do a factory reset.Then do erase cache!
-Now reboot in download mode and flash the md5 official firmware of ur choice.(note not the one that gives u "fail" error).
-ur galaxy note boot animation may be screwed but ur device will boot eventually.
Hit thanks if this saves ur day!!
Click to expand...
Click to collapse
Hey man.. plz reupload to somewhere... ur dropbox link is broken
link is broken.........for the recovery
I don't have access to recovery mode screen turns white when I try to enter?
Hi there guys, i have a problem why my phone, i install a new firmware in my A300FU, and i rooted usind CF-Autoroot,
allways i restart my phone enter in recovery mode and say:
MANUAL-MODE:
CSC
Etc
Any solution for that ?
Thanks
Flash new firmware and try again.Maybe u have used wrong pack?
-CALIBAN666- said:
Flash new firmware and try again.Maybe u have used wrong pack?
Click to expand...
Click to collapse
I use Cf-autoroot for my model, and always i restart in recovery mode and say 'LRX22G.A300FUXXU1BOJ5', because the root file is for BOJ5 model, the new firmware i have install is BPC2. So what i did is extract tar file for firmware and take cache.img.ext4 and recovery.img, and reflash in odin only in tar, because md5 get invalid value error, and i dont get more recovery mode when i restart my phone, i think is solved, thanks for the help mate!
Hi everyone
I have a g935f with oreo firmware.But i don't have imei and baseband.I try to flash combination file but always ends with error.I can flash firmware but only binary 3, but always no modem. I try to repair with z3x box but it says
try downgrade modem if possible.
Any help will be welcome
Thank you very much
I did it after many many tries.Only solution it with combination firmware.After that write firmware but whithout CP in odin or z3x.Same binary.Repair imei and unlock.JOB DONE
marinicaalexandru said:
I did it after many many tries.Only solution it with combination firmware.After that write firmware but whithout CP in odin or z3x.Same binary.Repair imei and unlock.JOB DONE
Click to expand...
Click to collapse
Link for the combination file please?
Im with Binary 3 too and cannt downgrade
Thank you
combination file s7 edge
https://addrom.com/collection-combination-rom-samsung-s7-edge/
query, did you manage to downgrade ?, or just by flashing the firmware combination you can now repair or change the imei with the z3box in oreo?
could you tell me the steps plis? Thx
you cannot downgrade binary 3.just flash combination firmware.binary 3 of course.enable usb debugging in settings/developer options.shut down.put in download mode an flash binary 3 firmware.oreo.without boot and modem.BL and CP.after that repair imei if it not shown.i write cert data and it was ok
marinicaalexandru said:
you cannot downgrade binary 3.just flash combination firmware.binary 3 of course.enable usb debugging in settings/developer options.shut down.put in download mode an flash binary 3 firmware.oreo.without boot and modem.BL and CP.after that repair imei if it not shown.i write cert data and it was ok
Click to expand...
Click to collapse
You repaired imei you did it with the z3 box?
yes.it is possible that combination firmware read imei ok.it happens
marinicaalexandru said:
yes.it is possible that combination firmware read imei ok.it happens
Click to expand...
Click to collapse
ok, and the last thing, I can change the imei of the device with the box z3, because unfortunately I had my device with the imei changed without knowing it, so I updated my device from mm at oreo it and changed my imei and now I have no signal, so I would like to patch the certificate that I had before, since you can not do dowgrade
the imei is written on the back cover.you must write that imei.i am not sure if it works with another imei
Hello everyone,
I have a N9005 that only goes into download mode. It doesn't go into recovery mode. When I try to put it in recovery mode, just vibrates, the screen is black and continues to restart itself, vibrating.
If I try to turn it on normaly, Samsung Galaxy Note 3 N9005 logo comes on, stayes like this for 30, seconds, restarts, vibrates twice and keeps on doing this on and on
If I take it to download mode and try to flash a new rom, Odin tells me that there is no PIT partition. I even added the PIT file, but the same, no luck
When I try to flash a rom, on the download mode screen give me different red messages
UDC START-red color
MMC reading error
I even tryed to do emergency recovery with keys, but no luck as well
Any advice?
Regards!
Install Firmware from Sammobile...
albrecht1977 said:
Install Firmware from Sammobile...
Click to expand...
Click to collapse
I will let you know how it works/if it works
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
Yes, I am flashing the correct firmware from sammobile.
It is tar.md5
Now the phone shows me ODIN: flash read failure.
What can I do in this situation? If it is as you wrote, damaged Nand?
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
When I try to flaah the TWRP recovery, "there is no PIT partition"
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
JJEgan said:
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
Click to expand...
Click to collapse
Do you have any ideea where I can find the 4 part firmware?
Thanks
Sammobile /updato/samsung -updates. Alldot comms
Search this forum search google.
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
audit13 said:
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
Click to expand...
Click to collapse
Hey guys. Did anyone ever find the solution for this? I have the exact same problem like as in literally exactly. And I've tried the 4part repair firmware, with the pit, as wel as the combination firmware as well as the stock firmware and even tried cf auto root, boot images, twrp flashes.. Nothing! Just also keeps giving the pit error.
Reads as NAND fail , if you have followed all the advice .
My tablet does not start and shows this message: An error has occurred during device update. Please use the Emergency recovery Function in the Smart Switch PC Software
I tried downloading Smart Switch and opening the Device emergency recovery menu but nothing shows up in the device list.
Then I tried downloading Odin and a firmware, the device was recognized, I imported all the files (including the PIT FILE), checked Nand Erase and Repartition, started the flash but soon after it fails at Complete Write operation Failed.
How can I restore functionality of my tablet?
RobyGuizzo said:
My tablet does not start and shows this message: An error has occurred during device update. Please use the Emergency recovery Function in the Smart Switch PC Software
I tried downloading Smart Switch and opening the Device emergency recovery menu but nothing shows up in the device list.
Then I tried downloading Odin and a firmware, the device was recognized, I imported all the files (including the PIT FILE), checked Nand Erase and Repartition, started the flash but soon after it fails at Complete Write operation Failed.
How can I restore functionality of my tablet?
Click to expand...
Click to collapse
Try flashing with Odin but do not select nand erase or repartition. Also don't select the PIT file it will pull pit from csc if it needs it. Check settings and make sure only reboot and f.reset time are selected. It should go normally, if not may need to look at country change.
tek3195 said:
Try flashing with Odin but do not select nand erase or repartition. Also don't select the PIT file it will pull pit from csc if it needs it. Check settings and make sure only reboot and f.reset time are selected. It should go normally, if not may need to look at country change.
Click to expand...
Click to collapse
It doesn’t work and it gives this error:
RobyGuizzo said:
It doesn’t work and it gives this error:
Click to expand...
Click to collapse
Try flashing BL only. I'm confused by five sections that you're flashing. But just try them one at a time starting with BL then CSC then AP. Un-tick auto reboot for BL and CSC let it auto reboot after AP. You will have to manually reboot download mode after each.
Home_CSC keeps /data and CSC performs factory reset wiping /data. You don't flash both.
If that doesn't work look at this video
You may need to download a different firmware.
tek3195 said:
Try flashing BL only. I'm confused by five sections that you're flashing. But just try them one at a time starting with BL then CSC then AP. Un-tick auto reboot for BL and CSC let it auto reboot after AP. You will have to manually reboot download mode after each.
Home_CSC keeps /data and CSC performs factory reset wiping /data. You don't flash both.
If that doesn't work look at this video
You may need to download a different firmware.
Click to expand...
Click to collapse
I flashed BL, it failed at the end, then I tried to flash CSC and it gives Re Partition operation failed. I tried the others but says that there isn’t any PIT PARTITION. Now it doesn’t go into download mode and the screen flickers.
RobyGuizzo said:
I flashed BL, it failed at the end, then I tried to flash CSC and it gives Re Partition operation failed. I tried the others but says that there isn’t any PIT PARTITION. Now it doesn’t go into download mode and the screen flickers.
Click to expand...
Click to collapse
If not download mode then what does it go into ? What is flickering on screen ? Have you tried a different firmware ?
tek3195 said:
If not download mode then what does it go into ? What is flickering on screen ? Have you tried a different firmware ?
Click to expand...
Click to collapse
Where can I download the right firmware?
It goes into the emergency recovery screen.
RobyGuizzo said:
Where can I download the right firmware?
It goes into the emergency recovery screen.
Click to expand...
Click to collapse
go to easy-firmware and find the one you think to be most suited for your tablet and let me know and I will grab it for you on my account
RobyGuizzo said:
Where can I download the right firmware?
It goes into the emergency recovery screen.
Click to expand...
Click to collapse
I found a UK version on Sammobile. I think the problem is that you are flashing way too much. Try flashing just AP and BL. They are the ones that get messed up.
lewmur said:
I found a UK version on Sammobile. I think the problem is that you are flashing way too much. Try flashing just AP and BL. They are the ones that get messed up.
Click to expand...
Click to collapse
I had mentioned Easy-firmware so he could select from 40 different versions. Have to agree, flashing too much. I had the same error one time years ago and had to flash firmware from a different region to clear it then flashed correct region. I got that solution off youtube but didn't see it when I looked for this now. Know anything about that ?
tek3195 said:
I had mentioned Easy-firmware so he could select from 40 different versions. Have to agree, flashing too much. I had the same error one time years ago and had to flash firmware from a different region to clear it then flashed correct region. I got that solution off youtube but didn't see it when I looked for this now. Know anything about that ?
Click to expand...
Click to collapse
It's been a couple of years since I ugraded my last 2016 to a 2020, but I recall having problems when flashing CSC back then. And there was no USERDATA.
lewmur said:
It's been a couple of years since I ugraded my last 2016 to a 2020, but I recall having problems when flashing CSC back then. And there was no USERDATA.
Click to expand...
Click to collapse
Exactly, BL, AP, CP and CSC or HOME-CSC is it for this tablet as well. There is no USERDATA. @RobyGuizzo flashing anything in the userdata section of odin could be a bad thing.
tek3195 said:
Exactly, BL, AP, CP and CSC or HOME-CSC is it for this tablet as well. There is no USERDATA. @RobyGuizzo flashing anything in the userdata section of odin could be a bad thing.
Click to expand...
Click to collapse
To me the first rule of diognostics is to isolate the elements. We know AP and BL are essential. So which one of the others are the problem?
lewmur said:
To me the first rule of diognostics is to isolate the elements. We know AP and BL are essential. So which one of the others are the problem?
Click to expand...
Click to collapse
I don't know, but that error seems to lock it in some way. I know frp hijacker software is reported to allow flashing with that error. As did different region when I had it before. It's not just a corrupt partition but a lock of some kind.