Database Users

Reboot into Recovery Mode

Hi there guys, i have a problem why my phone, i install a new firmware in my A300FU, and i rooted usind CF-Autoroot,
allways i restart my phone enter in recovery mode and say:
MANUAL-MODE:
CSC
Etc
Any solution for that ?
Thanks

Flash new firmware and try again.Maybe u have used wrong pack?

-CALIBAN666- said:
Flash new firmware and try again.Maybe u have used wrong pack?
Click to expand...
Click to collapse
I use Cf-autoroot for my model, and always i restart in recovery mode and say 'LRX22G.A300FUXXU1BOJ5', because the root file is for BOJ5 model, the new firmware i have install is BPC2. So what i did is extract tar file for firmware and take cache.img.ext4 and recovery.img, and reflash in odin only in tar, because md5 get invalid value error, and i dont get more recovery mode when i restart my phone, i think is solved, thanks for the help mate!

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..

S7 Edge G935F // Faulty ODIN flash // Stuck in Bootloader [SOLVED]

Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"

Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.

fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?

Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!

Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime

Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.

SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.

Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?

suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.

Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally

suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.

Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there

Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model

SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?

S3 neo GT-I9301I wont boot after wrong firmware

Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
https://androidfilehost.com/?fid=746163614322275276
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help

alaa92 said:
I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help
Click to expand...
Click to collapse
download the right rom and flash it with odin

abdullah1038 said:
download the right rom and flash it with odin
Click to expand...
Click to collapse
I have tried to flahs it with multiple rom but same problem
Also i have tried a repair firmware (4 files) but same problem
It's just keep rebooting with blue text on top (Recovery booting.....)
Any help

any help please

alaa92 said:
any help please
Click to expand...
Click to collapse
try this it might work
download this file and extract it
http://allmobilesoft.com/zip/uploads/2016/12/I9301I-PIT-File-allmobilesoft.com_.rar
connect your phone with odin and click pit
and select the extracted file
click on repartition
click on pda and select the right rom for your phone
then click start it will take about 20 minutes.
remember i am not responsible if you bricked your device.

Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.

alaa92 said:
Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.
Click to expand...
Click to collapse
i9300I= dual sim
i9301i= one sim
download mod or model label under battery is not matter
if your phone dual sim flash i9300i or if one sim flash by i9301i file. just thish

Worng Firmware I9300I, right firmware is I9301I
I Have Same Problem
Please Help Me
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
I9300I
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

kernel is not seandroid enforcing galaxy s3 neo I9301I
Accidentally Flash complied Firmware I9300I file
When I am Downloading Mode Their Is Product Nam : I9300I
how to flash it
Please
Help Me

help, sm-g531f brick (firmware upgrade encountered an issue..)

hello all,
yesterday i tried to root my phone but i guess i miss something. My phone stuck in this screen and i cant do anything. :crying: Could you please help me? ( when i try to flash rom with the odin it fails.) You may recommend another rom maybe.
(I could not add links or photos.)

Hope I can help u
Granitema said:
hello all,
yesterday i tried to root my phone but i guess i miss something. My phone stuck in this screen and i cant do anything. :crying: Could you please help me? ( when i try to flash rom with the odin it fails.) You may recommend another rom maybe.
(I could not add links or photos.)
Click to expand...
Click to collapse
Hello!, I hope is not late for the help. Follow my steeps (sorry for my eglish)
1. Download the firmware for ur mobile (U can do it with a program called Frija, is the fastest way).
2. Download ODIN V. 3.10.7 (Is the best version for your model)
3. Open ODIN and put the ROM, select the option: Nand Erase All.
4. Flash!
5. If all goes fine congrats, but if ur phone is stuck in SAMSUNG logo go to step 6.
6. Put ur phone in ODIN mode again, and re flash but don't select Nand Erase this time.
7. Wait for 100% then, turno off ur phone, and enter recovery mode (VolUp + Home + Power)
8. Select in recovery: Wipe data factory and Wipe Cache Partition.
9. Restart ur Phone and wait. If all goes fine: Congrats.

i support what "cc33wm" wrote,
also, at least on mine i had to unlock the bootloader first in order to root it properly(i also installed twrp recovery), so it might also be your case