Please help me. I have a Huawei Y625 (a bit more than a year old), it is NOT rooted. I have never attempted to customize it/tinker around with it. I don't even know the exact terminology so I'm sorry if I get something wrong.
Yesterday it suddenly went into a bootloop, it kept saying "DataBackupStart" with a bunch of processes failing.
I held volume down + power button, which opened a menu entirely in Chinese.
I clicked everything on that menu, but those were just some tests, like camera and sound test.
Then I powered it off, held volume down+volume up+power button this time, and it finally got me to recovery mode I think.
I wiped cache, and I wiped all data, which did a factory reset. It was OK with me because I just want it to work.
Then I tried to reboot it, but then it started behaving even worse. It will not turn on until I remove and put back the battery, and then it will vibrate, show the Huawei logo for a few seconds and then turn off again. It never got past that logo, except if I turn on recovery mode.
I found its official stock files, put the 'update.app' in the dload folder on sdcard, then tried to activate that rom in the recovery mode. It says 'error, status 7, installation aborted'. I googled it but I do not understand a thing, I really don't get these tutorials and I don't know what to do about that.
I tried downloading Marshmallow 6.0 version, because I thought maybe upgrading Android would help, but I cannot find any download links that work.
I am out of my mind, I need my phone and nothing I found on the Internet has been helpful. I don't even know how it came to this since I have never even attempted to root my phone! Please help me, thank you. :crying::crying::crying:
Related
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
Solved!
Please buy hyelton a beer or a damn new phone. He's a hero.
This worked: http://forum.xda-developers.com/showthread.php?t=2432476&highlight=decrypt
Hey guys, but of an emergency here...
I'm stuck at the LG logo after flashing the Pacman ROM with the latest unofficial CWM, and it seems to have failed at Formatting system. All four touch buttons on the bottom were blue, as if they had been pressed and highlighted. No response from anything.
Reboot. Then it got stuck on the LG logo. I can't access CWM anymore, holding power + vol down does nothing, I just go back to the logo. I'm running a D802.
This was a pretty standard flash for me, I have done this many times, so I was confident in it, but now have no way back into a phone I desperately need within hours.
Process went as follows;
Full wipe, format, initialize install, it failed/crashed/whatever, rebooted, now stuck on logo, unable to access CWM, and obviously unable to access ROM.
USB Debugging was on, but as the ROM doesn't exist anymore, not sure how much help that'll be.
I'll gladly go back to either CWM or TWRP, as well as stock ROM or whatever. I can sort all that out later, right now just need things back in running order.
Edit1: I can't even turn it off. It simply boots up again, so now also worried of damaging display or battery.
Edit2: It's not showing after entering "adb devices". List is empty.
ANY help appreciated.
I'm running Windows 8, and no, I will not be able to reinstall to W7 or Ubuntu.
Thank you
HELP! I think I bricked my G2. No idea what to do
I wanted to root my phone, which I already rooted before but then I made a factory reset and afterwards I got a root detecting app and it said my phone was rooted. But it didn't seem to exactly 100% work. I had downloaded superuser and I wasn't getting any prompts for superuser access when I tried to use apps that require root.
So I followed the steps in this thread to root:
http://forum.xda-developers.com/showthread.php?t=2784127
Install TowelRoot from here: http://towelroot.com/
Then install AutoRec from here for TWRP recovery: http://forum.xda-developers.com/showthread.php?t=2715496
Then if your staying stock I highly recommend you download and install SuperSU in recovery so that it's properly rooted. http://download.chainfire.eu/282/SuperSU/
Click to expand...
Click to collapse
Things /seemed/ to go smoothly, but after installing SuperSU from TWRP I tapped on reboot, then system (which I thought meant booting into the android OS, normally) but after the LG logo it went to a black screen with the LED flashing green and blue, and nothing happens... even if I leave it for like 10 mins nothing will happen. I tried lots of button combinations, long pressing the power button restarted the device and did the same issue, pressing volume up, down, and power turned the device off (thank god that exists) but there's nothing else I can do.
Btw my phone is on android v4.2.2, I never updated it to 4.4.2+ cause I heard that update has bugs and I was fine with my phone just working as it is.
TL;DR; phone is on 4.2.2, won't boot into android, after the LG logo during boot the LED flashes green and blue and nothing happens.
Does anyone have any idea what I can do now? Please help me I just want my phone to work again
Edit: Phone can go into download mode. But I have nothing to 'download' on it, what do I do now? Also I can access TWRP through the 'hard reset' thing (volume down and power button), and i tried factory resetting through it, but the phone still doesn't work.
I unbricked it, here's what I did, for anyone with the same issue
I went to this website http://sndeep.info/en and looked up my IMEI, which told me what country the phone was for.
Then I downloaded my appropriate firmware from http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
And followed the steps in this thread http://forum.xda-developers.com/showthread.php?t=2432476 choosing a normal flash, not a CSE one.
Phone now works absolutely fine, hope this helps anyone who bricks their phone the same way.
So, my tablet shut itself off.
I turned it back on, and it started up the activation process / new device walkthrough that you get when i first got the device. All my apps were gone. Play Store crashed if I opened it. Restarted device, and it started up the activation process again. Attempted a factory reset from the settings menu. Nothing happened. I dont mean nothing changed, but literally nothing happened. Selected reset, said yes on cofirmation, and nothing happened. Held down the volume down and power buttons, let go of power button, then held all three to get to the alternate factory reset option. Selected it and got a series lines of "failed to mount". Restart device, nothing has changed.
Any ideas on what exactly has happened?
Any suggestions on what to do, with detailed instructions?
UPDATE:
Tried a variety of rooting options, which are apparently very limited for the v410, to see if I could fix my issues.
Purpledrake brought me to the recovery mode screen which ended in the same results: "failed to mount"
OneClickRoot and KingRoot both just got hung up at 0%.
Would really appreciate some insight into what the issue is, and wether it is something I can fix myself.
Kingo Root hangup
Did the same thing to me when using it from the PC, but I just rebooted my V410 and ran it again. It worked the second time. Didn't do me much good, though. Can't get into recovery, can't unlock bootloader, can't find a way to install CM on this thing.
I still have this device sitting around. I would love to be able to fix it. Hoping someone out there can help me out. It seems to me that its a memory issue, since in settings under storage, it says there is only 100mb of available space, and that 15 of the 16 total gb being used is system data.
Hi, I need help with my Huawei P10 Lite WAS-LX1. I have poor knowledge on firmware versions, updates etc. so I'll try to describe my problem in short bullets. Here is the development of the situation:
- My phone was in water for couple of seconds
- After I dried it out, the only way I managed to turn it on was using combination of PWR + VOL+ or VOL- not sure which one I used
- That combination got me to Huawei splash screen, and immediately after that to EMUI screen, apparently for update - the screen looks exactly like this - take. ms/iaGMk
- The phone can't get out of this state, it keeps turning itself on and on and trying to install this update, there is no way to turn the phone off, it's just in this loop
Now, what I've tried and results:
- I tried uploading an update (update.app in dload folder) that I found on this forum, to an SD card, and the result was that installaton got to 5% and got to this screen again - take. ms/iaGMk
- I tried connecting the phone to my PC via USB, and the result was that installation got to 5%, and at that point my HiSuite asked me to authorize PC on the phone, looks like this - take. ms/VFUXt ,which I can't do because the phone is in this, recovery or whatever it's called, state
Now, at one point, the battery got empty and the phone somehow showed me the recovery menu, where I had among other options: Update with WiFi and Factory Reset. I did factory reset, and then I updated EMUI with WiFi - once it was done, the phone started up in safe mode, and everything was working except power/lock and volume buttons (is this normal for Android safe mode?).
I was checking the phone a bit and then it turned off, and now it's in the frickin loop again - take. ms/iaGMk
I can't do anything at all, it responds to nothing. My thinking is that there is maybe a correct version that I can upload to an SD card and perhaps that will be the solution.
Anyhow, that's basically it, please let me know if you have any questions. Keep in mind that I have no idea which firmware version it is because I can't start up the phone or anything.
Thanks a lot in advance!
Best,
Strahinja
StrahinjaS said:
Hi, I need help with my Huawei P10 Lite WAS-LX1. I have poor knowledge on firmware versions, updates etc. so I'll try to describe my problem in short bullets. Here is the development of the situation:
- My phone was in water for couple of seconds
- After I dried it out, the only way I managed to turn it on was using combination of PWR + VOL+ or VOL- not sure which one I used
- That combination got me to Huawei splash screen, and immediately after that to EMUI screen, apparently for update - the screen looks exactly like this - take. ms/iaGMk
- The phone can't get out of this state, it keeps turning itself on and on and trying to install this update, there is no way to turn the phone off, it's just in this loop
Now, what I've tried and results:
- I tried uploading an update (update.app in dload folder) that I found on this forum, to an SD card, and the result was that installaton got to 5% and got to this screen again - take. ms/iaGMk
- I tried connecting the phone to my PC via USB, and the result was that installation got to 5%, and at that point my HiSuite asked me to authorize PC on the phone, looks like this - take. ms/VFUXt ,which I can't do because the phone is in this, recovery or whatever it's called, state
Now, at one point, the battery got empty and the phone somehow showed me the recovery menu, where I had among other options: Update with WiFi and Factory Reset. I did factory reset, and then I updated EMUI with WiFi - once it was done, the phone started up in safe mode, and everything was working except power/lock and volume buttons (is this normal for Android safe mode?).
I was checking the phone a bit and then it turned off, and now it's in the frickin loop again - take. ms/iaGMk
I can't do anything at all, it responds to nothing. My thinking is that there is maybe a correct version that I can upload to an SD card and perhaps that will be the solution.
Anyhow, that's basically it, please let me know if you have any questions. Keep in mind that I have no idea which firmware version it is because I can't start up the phone or anything.
Thanks a lot in advance!
Best,
Strahinja
Click to expand...
Click to collapse
4gb or 3gb ram, dual or single sim?
nemanjsb said:
4gb or 3gb ram, dual or single sim?
Click to expand...
Click to collapse
Hi, I believe it's 3gb. It's a single sim device.