Related
Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.
I just got my DVP a few days ago...
Today I dropped it (the first time it dropped) and it shattered the glass...
everything works fine still...it is just so ugly I would like to get it fixed...
What can I do?
I cannot find any replacement parts, I cannot find any repair shops for this phone also... currently I am on hold trying to call dell (hopefully they give me good news?)....
I am lost and disappointed -I cant believe I cracked it esp. this soon!..
well I am asking for your advice / comments / help on this one, XDA ...
please advise me...
UPDATE: dell said it would be 249.99 to get a replacement phone...
good deal? or should I just get another phone or something? I am thinking of going through with it to get it done, but if there are cheaper options I am interested...
Did you try checking with @dellcares on Twitter? Someone had a similar issue the other day and said @dellcares helped them. Not sure exactly what the outcome was, but worth a shot.
pjfan75 said:
Did you try checking with @dellcares on Twitter? Someone had a similar issue the other day and said @dellcares helped them. Not sure exactly what the outcome was, but worth a shot.
Click to expand...
Click to collapse
no, but dell charged me 249.99 to send me a replacement device...
they told me that a cracked screen is considered to be out of warranty (I think it also includes any physical damage as well...not sure about that part though)...
erebusting said:
no, but dell charged me 249.99 to send me a replacement device...
they told me that a cracked screen is considered to be out of warranty (I think it also includes any physical damage as well...not sure about that part though)...
Click to expand...
Click to collapse
you're lucky then. They sent me a copy of the posting on their community forums telling me its absolutely not covered. I could replace my 16g device...for $499.00. But they would throw in free over night shipping.
While it sucks, I think it's hard to argue with this stance unless people start to report widespread screen cracks. I've dropped mine a couple of times and no problems (~knock on wood~) and I have not read about a rampant issue with screen fragility, so at the moment it sounds like you were just damned unlucky.
My phone just fell at the train station and the freaking screen cracked. Damn. I called T-Mobile . .The rep at first didn't even know what it was and asked if it was a tablet. Put me on hold for over 10 mins then asked me to call Asurion and see what they said.
Asurion rep put me on hold for about 5 mins and then said it wasn't a supported phone.
I then called Dell Mobility. Lady told me $249 for a replacement. wow! I told her I'd think about it. Though it's half the cost I could get an HD7 straight from T-Mobile for less than $100 with contract renewal
alabij said:
My phone just fell at the train station and the freaking screen cracked. Damn. I called T-Mobile . .The rep at first didn't even know what it was and asked if it was a tablet. Put me on hold for over 10 mins then asked me to call Asurion and see what they said.
Asurion rep put me on hold for about 5 mins and then said it wasn't a supported phone.
I then called Dell Mobility. Lady told me $249 for a replacement. wow! I told her I'd think about it. Though it's half the cost I could get an HD7 straight from T-Mobile for less than $100 with contract renewal
Click to expand...
Click to collapse
That is exactly why I have mine insured by Squaretrade...
erebusting said:
I just got my DVP a few days ago...
Today I dropped it (the first time it dropped) and it shattered the glass...
everything works fine still...it is just so ugly I would like to get it fixed...
What can I do?
I cannot find any replacement parts, I cannot find any repair shops for this phone also... currently I am on hold trying to call dell (hopefully they give me good news?)....
I am lost and disappointed -I cant believe I cracked it esp. this soon!..
well I am asking for your advice / comments / help on this one, XDA ...
please advise me...
UPDATE: dell said it would be 249.99 to get a replacement phone...
good deal? or should I just get another phone or something? I am thinking of going through with it to get it done, but if there are cheaper options I am interested...
Click to expand...
Click to collapse
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
philippis said:
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
Click to expand...
Click to collapse
Hi, so i had a similar situation this past week and I wanted to find out if you were able to purchase and replace the screen? Got the same $249.99 replacement quote from dell (even though you can purchase a new one for $300 from dell).
Please help!
Gorilla glass is supposed to be strong?
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
nauman said:
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
Click to expand...
Click to collapse
Scratch Resistant NOT shatter proof. Accept this now before something happens and you wind up butthurt.
you guys should get a warranty from squaretrade. they cover shattered screens and liquid immersion and are pretty cheap compared to an extended warranty from dell.
Dell Venue Pro replacement glass / fix
babaaketi said:
Hi, so i had a similar situation this past week and I wanted to find out if you were able to purchase and replace the screen? Got the same $249.99 replacement quote from dell (even though you can purchase a new one for $300 from dell).
Please help!
Click to expand...
Click to collapse
I had a similar situation - wife dropped and our small son stepped on her Venue Pro, cracking the upper right corner of the gorilla glass. The phone still worked fine, even in the impacted area -- it just looked ugly and glass continue to chip off. Dell offered to replace it for $250.
I found the replacement glass from the below site, ordered it and it took about 2 months to arrive (they were out of stock initially).
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I successfully swapped out the glass today and it was tedious being careful not to break anything and lose parts, but not too bad if you're patient - it took me about an hour. Remove the backing and battery and there are 6 black screws to remove (one was covered by a white sticker for me). I just used my finger nail to go around the edge of the lower housing (not LCD) until I was able to wiggle and eventually pop it free (be gentle, don't force it). Then extend the slider so the keyboard is exposed. Rotate 90 degrees from the lower housing you separated from, being careful not to damage the cables that attach the LCD to the lower housing. There are then 4 screws that secure the digitizer / glass to the LCD and slider housing. Two you can see internally once you rotate 90 degrees as above. The other two are always visible with the slider extended (keyboard visible) but they're under 2 black stickers at the top of the screen on the back. I just used a push pin under the edges to pop off the stickers. After removing these 4 screws, again I used my finger nail working my way around to pop off and remove the digitizer / glass from the LCD and slider housing. Once free, there is a single cable connection to remove the digitizer / glass from the LCD. Check the replacement glass as a guide for where these last 4 screws are and where the cable connects (top of the screen near the speaker). The cable just pops on / off.
Ensure you clean the underside of your new screen and the LCD is free of dust / debris / fingerprints before reassembling! Snap on the glass to the LCD / slider housing and install those 4 screws first, then rotate back 90 degrees to pop on the lower housing and then finally re-install those 6 screws. Mine fired right back up and works fine...I was a little nervous with potential damage to the exposed cables and separating the housings, but it turned out fine.
nauman said:
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
Click to expand...
Click to collapse
I just replaced mine last night. A bit heart stopping at times as there are a lot of fragile cables and little thingst that can fall out but if you have a good light, a small star-shaped screwdriver, and patience, you can do it. I bought the glass from an EBAY seller in china. Took less than 14 days to arrive and the cost was a lot cheaper than the UK seller you see in the posting (I paid like $74, with shipping). My DVP looks new now. I tooks some pictures as I was taking the thing appart and will try and post later.
I was able to create a very raw an amateourish video for youtube. Hopefully you can use this link to get to it //youtu.be/pnOnYZDZfrw I hope this helps somebody out there that needs to replace the glass on their DVP!
philippis said:
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
Click to expand...
Click to collapse
Thanks for the advice, I'll check it out.
I've managed to get some serious scratches on my Gorilla Glass and I've no idea how I've done it as I am always incredibly careful with my phone.
How do you know it pops out easily? Did you see it somewhere? I'd like to see how easy it is to remove and replace before attempting it myself.
Thanks in anticipation,
Best wishes,
DaFfY
---------- Post added at 11:42 AM ---------- Previous post was at 11:38 AM ----------
Ooops! Just seen the video!
Thanks guys,
Appreciate the help.
Best wishes,
DaFfY
now what....
I shattered the front glass on my DVP and bought a replacement on Ebay from a seller in Hong Kong. I watched a youtube video and managed to take the phone apart and replace the screen successfully. If you do this, be warned that there a few pieces that are not attached to the motherboard that will just fall out. Be sure to notice where they came from. For me, a little board running the on/off button and the camera lens fell out. It was easy to put them back in their place. HOWEVER........
Everything works now except I see the letters "ENU" up near the clock, and the virtual keyboard will not appear. Do you think this means the phone thinks the keyboard slider is out because of something I screwed with while the phone was apart?
I just installed the Mango 8107.79 update, and the keyboard still will not appear. So I know its not a bug. The EM app (you get after pressing qwertyuiop and doing the "man machine interface test") is telling me the slider is open when its not.
What does ENU mean? Just be careful if you replace your own screen!!
nylonthread said:
What does ENU mean? Just be careful if you replace your own screen!!
Click to expand...
Click to collapse
ENU means that the next letter you type is going to be upper case.
nylonthread said:
Everything works now except I see the letters "ENU" up near the clock, and the virtual keyboard will not appear. Do you think this means the phone thinks the keyboard slider is out because of something I screwed with while the phone was apart?
Click to expand...
Click to collapse
Yes, I think you are probably correct.
Mine says 'ENG', so I would guess it represents the language. 'ENU' is probably English - United States. The code seems to appear when the physical keyboard is pulled out. (It doesn't seem to be visible when using just the on-screen keyboard).
thanks....
Thanks, that's what I needed to know. I guess I'll take it apart again and see if I can figure out why the keyboard is stuck in pulled-out-mode. I feel guilty now, because I just bought a Lumia 710 to replace my DVP, but the display is nowhere as beautiful. The Dell really is a great product....
So I cracked the screen on my vibrant, where can I get a replacement from a reliable place? It's just the gorilla glass part, everything else is fine.
Thanks
Samsung.
Its the only place your going to get a true replacement....everyone else sells lcd...i do believe
Damn, howd you do that?
No cheap parts on ebay:
http://cgi.ebay.com/US-OEM-T-mobile...Accessories&hash=item3a658e7b3c#ht_2099wt_905
Another one: http://cgi.ebay.com/LCD-Touch-Digit...ultDomain_0&hash=item3cb7352bff#ht_500wt_1156
If its over $100, you are probably better off finding a replacement phone on Craigslist.
While I feel bad for you cracking I'm curious as to how the heck you pulled it off? I've dropped the hell out of mine on face first on just about everything and hav only one scuff on the screen... my heart hurts for you
Well, i cracked mine and replaced it. first for those who cant understand how a gorila glass can crack :
Mine scaped from my hand and hit the floor from above 1 meter, the screen cracked entirely. the problem is that the glass is virtualy impossible to crack if you hit in the middle of it, but, if you hit the CORNER with enough power, it will be gone.
You have two choices : replace ONLY the glass, would cost 20 usd, but its almost impossible to do it at home withtout the right tools, or you can buy the full display (screen_digitizer) for about 140 usd. for how to replace it, search youtube for : vibrant repair.
Help!!!.
I got up this morning and dropped my phone resulting in the glass smashing. The touch screen still works and the glass is held in place by a screen protector. There is someone advertising on ebay to fit new screens for £48.99. IS this a good price??.
Also........ the vibration on my phone sounds as though it is loose inside so I was thinking that maybe a refurb is worthwhile at the same time.
Does anyone know where in the UK I could get this done at a sensible price?.
Any help would be much appreciated.
Thanks in advance
Scotty.
Google is your friend :0
http://www.htcphonerepairs.co.uk/HTC-HD-2
My S4 screen got two hairline cracks about a month ago and expanded a little. The phone was working fine but this was bugging me. I went to Amazon and purchased a new OEM replacement glass (cost me $4; skeptical on the OEM claims). Anyway I removed the old glass successfully with a heat gun and a plastic iPhone tool and removed all the old adhesive off.
Being stupid I peeled the black adhesive and balled it up. I went to put on the new glass and I realized the new glass doesn't come with adhesive on it. After installing it I then realized that I actually cracked the LCD (I guess from the pressure when I was pressing a bit on the glass to make contact with the adhesive I thought came on the glass). Anyway, my phone doesn't turn on now (screen is dead) although the phone still works. I removed the screen again and threw everything in a box.
I'm without my personal phone now and I'm stuck using my company phone for the time being for personal stuff. I looked at Amazon and the replacement LCD is $200. I'm not on a contract with this phone and don't want to sign a contract with AT&T or I lose my current minute package I have. I purchased this device from Craigslist from some guy for $400 a couple of months back.
What is the best route to repair this? Keep in mind I don't have insurance since I purchased this outright. This is the 32GB model. Should I just sell it AS-IS on Craigslist? How much should I ask?
By the way I think Gorilla Glass is BS. My phone fell about 4 inches on the ground and got two cracks.
Android300ZX said:
My S4 screen got two hairline cracks about a month ago and expanded a little. The phone was working fine but this was bugging me. I went to Amazon and purchased a new OEM replacement glass (cost me $4; skeptical on the OEM claims). Anyway I removed the old glass successfully with a heat gun and a plastic iPhone tool and removed all the old adhesive off.
Being stupid I peeled the black adhesive and balled it up. I went to put on the new glass and I realized the new glass doesn't come with adhesive on it. After installing it I then realized that I actually cracked the LCD (I guess from the pressure when I was pressing a bit on the glass to make contact with the adhesive I thought came on the glass). Anyway, my phone doesn't turn on now (screen is dead) although the phone still works. I removed the screen again and threw everything in a box.
I'm without my personal phone now and I'm stuck using my company phone for the time being for personal stuff. I looked at Amazon and the replacement LCD is $200. I'm not on a contract with this phone and don't want to sign a contract with AT&T or I lose my current minute package I have. I purchased this device from Craigslist from some guy for $400 a couple of months back.
What is the best route to repair this? Keep in mind I don't have insurance since I purchased this outright. This is the 32GB model. Should I just sell it AS-IS on Craigslist? How much should I ask?
By the way I think Gorilla Glass is BS. My phone fell about 4 inches on the ground and got two cracks.
Click to expand...
Click to collapse
Sell it as-is, ask around $150 - $200... someone who knows how to fix it will gobble it up. Take that money and spend a little extra and buy a Nexus 5 from Google. At least this is what I'd do...
If you really intend on keeping it.
https://www.youtube.com/watch?v=Duc3v5Kgn-A
NighthawkXL said:
Sell it as-is, ask around $150 - $200... someone who knows how to fix it will gobble it up. Take that money and spend a little extra and buy a Nexus 5 from Google. At least this is what I'd do...
Click to expand...
Click to collapse
Agreed. I'd rather have the Nexus 5 anyway.
Really sorry to hear about your phone though. I personally wouldn't risk replacing the LCD, you may break something else while inside..
If anybody wants to buy it let me know via PM. If not, I'll just hang on to it until the S5 comes out. I'm sure the price of the LED screen will drop.
I purchased another S4 (16GB model in White). It sucks because the broken one is a 32GB.
Update: Sold the phone to some guy who owns a cell phone shop for $175. Not bad.