Database Users

Updating OP2 from OxygenOS 2.1.2 to 3.1.0

Hello All,
Can anyone provide the steps for updating my OP2, currently running OxygenOS 2.1. (Android V. 5.1.1) to the latest version.
My device is rooted with TWRP V2.87.0. The device also had Xposed Framework installed.
I need step-by-step process as I do not want to loose any of my DATA.
Thanks in advance.
__
Regards,
Nilesh E. Lokhande

neelz369 said:
Hello All,
Can anyone provide the steps for updating my OP2, currently running OxygenOS 2.1. (Android V. 5.1.1) to the latest version.
My device is rooted with TWRP V2.87.0. The device also had Xposed Framework installed.
I need step-by-step process as I do not want to loose any of my DATA.
Thanks in advance.
__
Regards,
Nilesh E. Lokhande
Click to expand...
Click to collapse
Flash the Oxygen OS 3.1.0 signed flashable zip
Wipe data & caches via TWRP
Flash the TWRP 3.0.2-2 img via TWRP
Reboot recovery via TWRP
Flash the Oxygen OS 3.1.0 signed flashable zip again
Flash one of the modified SuperSU zips
All the files you need are in post #1 of the Oxygen OS mirrors thread.
You can try updating without wiping data but you may well have issues afterwards.

Spannaa said:
Flash the Oxygen OS 3.1.0 signed flashable zip
Wipe data & caches via TWRP
Flash the TWRP 3.0.2-2 img via TWRP
Reboot recovery via TWRP
Flash the Oxygen OS 3.1.0 signed flashable zip again
Flash one of the modified SuperSU zips
All the files you need are in post #1 of the Oxygen OS mirrors thread.
You can try updating without wiping data but you may well have issues afterwards.
Click to expand...
Click to collapse
Hi Spanna,
Thanks for your reply. Can you tell me what kind of issues can be faced?
Is this process which you mentioned, Safe?

neelz369 said:
Hi Spanna,
Thanks for your reply. Can you tell me what kind of issues can be faced?
Is this process which you mentioned, Safe?
Click to expand...
Click to collapse
No issues if you wipe data.
It's safe if you follow the instructions.

Updating oxygen os without losing TWRP possible ?

Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.

german_oneplus_two said:
Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.
Click to expand...
Click to collapse
You want to upgrade to latest 3.5.5 ? You'll have to wait until signed flashable zip for 3.5.5 is made. For now 3.1.0 is the latest flashable zip.
Check this thread -> http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863

Thank you,
so i will wait for the full signed flashable zip.
still - my questions remain - i do not completely understand this :
Note: Since OTA incremental update zips will fail on rooted devices or devices with modifications to system files, it's not possible to use these to update without reverting back to completely stock, unrooted first.
To update you must either wait for the new, full, signed flashable zip to appear (usually a few weeks after the OTA update) or use the following workaround:
Boot into TWRP recovery
Flash the latest full signed flashable zip
Flash the new OTA incremental update zip
Flash the SuperSU zip
Reboot
Is it possible with the full signed flashable zip to keep twrp and my settings ?
Thank You

german_oneplus_two said:
Thank you,
so i will wait for the full signed flashable zip.
still - my questions remain - i do not completely understand this :
Note: Since OTA incremental update zips will fail on rooted devices or devices with modifications to system files, it's not possible to use these to update without reverting back to completely stock, unrooted first.
To update you must either wait for the new, full, signed flashable zip to appear (usually a few weeks after the OTA update) or use the following workaround:
Boot into TWRP recovery
Flash the latest full signed flashable zip
Flash the new OTA incremental update zip
Flash the SuperSU zip
Reboot
Is it possible with the full signed flashable zip to keep twrp and my settings ?
Thank You
Click to expand...
Click to collapse
As it says you can't use incremental update zips if you're rooted or has a modified system. You can either Flash the latest full signed flashable zip & then Flash the new OTA incremental update zip (without rooting) OR just wait for the Full signed flashable zip & then flash it(whether you're rooted or not). As for now neither "Incremental" nor "full" signed zip exists for 3.5.5.
And Yes. You won't lose TWRP.
To understand more about "Incremental" & "Full" update packages, read this -> https://source.android.com/devices/tech/ota/tools.html

you can flash full rom zip and without restarting flash twrp image in twrp itself, its kinda tricky but it works

3.5.5 Full Signed Flashable Zip's now available. Check the thread I sent before.

german_oneplus_two said:
Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.
Click to expand...
Click to collapse
I was on 3.1.0 with Hybrid recovery and root before the OTA for 3.5.5 came through. It installed itself via the ota (1.2gb) and when it was done I was back on default recovery and no root...which i fixed in few minutes..So I am now on the latest OS 3.5.5 with Hybrid Recovery and Root..everything is perfect! No network drops so far e.t.c
Edit: I didn't have to unroot for the OTA to work..It just did. Also didn't lost any data. all apps +data still intact

Thank You B!Gguy.
Signed flashable worked flawless

[OFFICIAL] OxygenOS 9.0.6 FINAL Stable (Android 9.0) for OnePlus 3/3T

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone!
We are starting to push the incremental roll-out of OxygenOS 9.0.6 for both the devices.
[Changelog]
System:
Updated Android security patch to 2019.10
General bug fixes and improvements
Updated GMS apps
For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.com/feedback/
This OTA will have a staged rollout, the OTA will be received by a limited number of users initially and will have a broader rollout in a few days after making sure there are no critical bugs, so using VPN to download this build might not work as the rollout Is not based on regions and is randomly pushed out to a limited number of devices.
This will be the last update for these two devices and we can't thank you enough for your invaluable feedback throughout these three years. With your support, we improved Oxygen OS across three major Android versions and dozens of updates. This is not the end for the OnePlus 3 and 3T, though. Starting next week, we will start highlighting some of the great work done by the developer community, for those of you considering to have a go at Custom ROMs.
Your feedback is appreciated. Hope you enjoy and let us know how you feel about the update in the comments below.
Never Settle :fingers-crossed:

Downloads
OOS 9.0.6 for OnePlus 3T
MD5 : e4e46aa9eebffdd485071383dcda4218
OOS 9.0.6 for OnePlus 3
MD5 : 7c2a1e83ac1a83a3ceb287983496549b
OOS 9.0.5
OOS 9.0.5 for OnePlus 3T
MD5 : ba020a5047f6a166853ec77486f2fd62
OOS 9.0.5 for OnePlus 3
MD5 : f7e17059507758b90dd9709d24e243bb
Official TWRP 3.3.1-0
ROOT: Magisk

Installation Methods
Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.
Important Note: If your device’s Bootloader is Unlocked, then installing this firmware will factory reset your phone as this is a firmware upgrade. All your personal data and app data will be wiped clean! So backup before flashing!
Download the necessary files from the post above and follow as below.
********************* For OOS Non Rooted Users with Stock Recovery *****************
1. Download the appropriate OTA from above link and place it in the root folder.
2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File
3. Once selected system would prompt upgrade now
4. Select upgrade now and system would reboot in stock recovery and flash the OTA
5. The installer would itself flash the OTA and reboot the device.
The Device will reboot and your OnePlus 3/3T is now running on the latest OxygenOS firmware & OS based on 9.0 Pie :fingers-crossed:
PS: The first boot may take some time so keep calm and wait for it to boot.
************************ For OOS users with TWRP and unlocked Bootloader************************
NOTE: This dirty flashing method is from the users who tried it and were successful. Please backup to be on safer side.
1. In TWRP, wipe cache & dalvik
2. Flash OOS Full Rom Zip
3. Flash Magisk for Root access (Optional)
4. Reboot to TWRP (to retain recovery as TWRP)
5. Reboot to system
************************ For Custom ROM Users with TWRP Recovery************************
Download the required files from Post 2
Once you have downloaded all the required files on your device, please follow as below:
Backup your phone storage contents to an external mass storage as everything will be wiped.
1. Reboot to TWRP recovery
2. Wipe Dalvik , System, Data & Cache
3. Format Data partition - system will be encrypted (this is a must else system will not boot the new Android version)
- Now your phone has been completely wiped. Copy the zip files to your phone by connecting to your PC/laptop while still in TWRP
3. Install Menu > Select OOS Full Rom Zip > Swipe to Flash
4. Flash Magisk for Root access (Optional)
5. Wipe Dalvik & Cache
6. Reboot System and enjoy latest OxygenOS based on 9.0 Pie :fingers-crossed:
PS: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.

Want to get rid of DM-Verity/Force Encryption? Check this THREAD

what is adaptive display mode ??

Hey i recently both a one plus 3t and rooted it how do i know which roms support sah charging and which do not?
i want to flash the latest nitrogen oreo 8.1 does that support dash charging?

ak_bagade said:
Hey i recently both a one plus 3t and rooted it how do i know which roms support sah charging and which do not?
i want to flash the latest nitrogen oreo 8.1 does that support dash charging?
Click to expand...
Click to collapse
fyi, almost all roms support dash charging. you are good to flash any rom
Sent from my OnePlus 3T using XDA Labs

VKD L!NK!N said:
what is adaptive display mode ??
Click to expand...
Click to collapse
looks like OnePlus copy pasted the update details from OnePlus 5 and forgot to remove the adaptive screen calibration which is not available for us. LOL
Sent from my OnePlus 3T using XDA Labs

@Siddk007 Flashing magisk right after 5.0.1 will make twrp stay as before? I always lose it after flashing oos

Siddk007 said:
Downloads
OOS 5.0.1 full zip : Gdrive
Blu_Spark TWRP
ROOT: Magisk OR SuperSU
Warning : Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.
Click to expand...
Click to collapse
Are you sure Magisk 15.1 is fine to be flashed with Rom 5.0.1 ?
Have you tried this yourself?
There are many posts mentioning bootloops because of this magisk version
Unleashed by my rooted OP3T in 8.0

Nice someone opened a new topic.
OP3T is still a beast

My OP3T is on OOS 4.5.1. It is rooted with Magisk 14.0. I have twrp version 3.1.1-x blu spark v38 . I want to update to the latest OOS 5.0.1. Can anyone give me advice on the steps to take and which versions I need of everything? I don't want any bootloops...

conephall said:
My OP3T is on OOS 4.5.1. It is rooted with Magisk 14.0. I have twrp version 3.1.1-x blu spark v38 . I want to update to the latest OOS 5.0.1. Can anyone give me advice on the steps to take and which versions I need of everything? I don't want any bootloops...
Click to expand...
Click to collapse
You need to get blu_spark TWRP 3.2.1.x (v8.61)
And to avoid problems, I suggest you go for Magisk v14.6. I myself am on Magisk v14.6 and didn't face any boot loop. And, to be on safer side, do take backup of all your data
Sent from my #FlagshipKiller 3T using Tapatalk

Hi,
thanks for this hint! Using Magisk 14.6 did the trick for me, combined with the blu_spark TWRP 3.2.1.x (v8.61) and wiping Dalvik/Cache.
After the first start, I ran the update to Magisk 15.1 directly in Magisk Manager and it also worked.
Every try befoe that led to a non starting system that got stuck in the OnePlus screen.
BR,
Matthias

matmike said:
Hi,
thanks for this hint! Using Magisk 14.6 did the trick for me, combined with the blu_spark TWRP 3.2.1.x (v8.61) and wiping Dalvik/Cache.
After the first start, I ran the update to Magisk 15.1 directly in Magisk Manager and it also worked.
Every try befoe that led to a non starting system that got stuck in the OnePlus screen.
BR,
Matthias
Click to expand...
Click to collapse
Can confirm same behavior with phone getting stuck on boot logo when updating with 15.1 but succeeding with 14.6.

tal123 said:
@Siddk007 Flashing magisk right after 5.0.1 will make twrp stay as before? I always lose it after flashing oos
Click to expand...
Click to collapse
after flashing oos in twrp, reboot to recovery not system, flash magisk. then reboot to system. twrp will stay
Sent from my OnePlus 3T using XDA Labs

RASTAVIPER said:
Are you sure Magisk 15.1 is fine to be flashed with Rom 5.0.1 ?
Have you tried this yourself?
There are many posts mentioning bootloops because of this magisk version
Unleashed by my rooted OP3T in 8.0
Click to expand...
Click to collapse
well, i have not tried myself but some have reported that magisk 15.1 works. let me confirm again. else i will update OP with 14.6
have u tried to unmount system prior to flashing magisk 15.1?
edit: 15.1 works if after rebooting oos and then flashed
Sent from my OnePlus 3T using XDA Labs

Siddk007 said:
Installation Methods
Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.
Download the necessary files from the post above and follow as below
PS: Dirty flash is fine if you are running a previous OOS version or any rom based on OOS, else if you come from a custom rom Clean Flash is recommended.
********************* For Stock Non Rooted Users with Stock Recovery *****************
1. Download the appropriate OTA from above link and place it in the root folder.
2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File
3. Once selected system would prompt upgrade now
4. Select upgrade now and system would reboot in stock recovery and flash the OTA
5. The installer would itself flash the OTA and reboot the device.
The Device will reboot and your OnePlus 3T is now running on the latest OxygenOS 5.0.1 firmware & OS based on 8.0 Oreo :fingers-crossed:
PS: The first boot may take some time so keep calm and wait for it to boot.
* After flash is successful go back to recovery and a wipe of cache is recommended.
* If in any case flash is unsuccessful the system would prompt you to download the full 1.4GB zip.
* Download that and follow the same process as above.
************************ For Rooted Users with TWRP Recovery ************************
Download the required files from Post 2
Once you have downloaded all the required files on you device, please follow as below
1. Update TWRP to the ones provided above by flashing the downloaded image
2. Reboot Recovery and Take a Nandroid of your existing ROM
(Note: Nandroid from 3.0.4-1 cant be restored on older version or and visa-versa)
3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe
4. Install Menu > Select OOS 5.0.1 Full Rom Zip > Swipe to Flash
5. Flash the provided SuperSU/Magisk to maintain root (Optional)
6. Wipe Dalvik & Cache
7. Reboot System and Enjoy OxygenOS 5.0.1 Firmware & Latest OOS based on 8.0 Oreo :fingers-crossed:
The first boot may take some time as the system would boot twice due to flash of supersu so keep calm :fingers-crossed:
PS: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.
Click to expand...
Click to collapse
Can magisk be flashed after rebooting the rom? I tried flashing rom and magisk at the same time and it was stuck at the 'powered by Android' screen for about 7 minutes.

goodoldie1996 said:
Can magisk be flashed after rebooting the rom? I tried flashing rom and magisk at the same time and it was stuck at the 'powered by Android' screen for about 7 minutes.
Click to expand...
Click to collapse
yes, flash magisk after rebooting the rom
Sent from my OnePlus 3T using XDA Labs

Siddk007 said:
well, i have not tried myself but some have reported that magisk 15.1 works. let me confirm again. else i will update OP with 14.6
have u tried to unmount system prior to flashing magisk 15.1?
edit: 15.1 works if after rebooting oos and then flashed
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
What do you mean?
If you flash the Rom and then you reboot without flashing Magisk,then you will lose the custom recovery.
In this case not only you wont be able to flash Magisk, you will have the stock recovery and you will have to start the whole process from scratch
Unleashed by my rooted OP3T in 8.0

[GUIDE] How to get Magisk Root & Xposed on Oreo 8.0 (STOCK)

I'M NOT RESPONSIBLE IF YOUR DEVICE BRICKS, SD CARD DAMAGES OR NUCLEAR WAR STARTS.
Rooting method described below will work on Oreo-running devices ONLY (confirmed on build OPN27.76-12-22 and on OPNS27.76-12-22-9).
Please follow all steps very carefully and make sure you downloaded correct versions of all .zip files mentioned in my instruction!
ROOT (SafetyNet test will PASS!)
1. Download all files listed below:
- twrp-3.2.3-0-addison.img (CLICK)
- Magisk-v17.1.zip or newer if availabe (CLICK)
- f2fsfix-2018.9.2.zip (CLICK)
2. Flash TWRP using Fastboot:
Code:
fastboot flash recovery twrp-3.2.3-0-addison.img
3. Flash Magisk-v17.1.zip (or newer if available).
4. Go to TWRP/Settings and open Terminal.
5. Run both of following commands:
Code:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6. Flash f2fsfix-2018.9.2.zip
7. Reboot (it is crucial in case of installing Xposed afterwards).
8. Optional but recommended: update your Magisk Manager to the latest version (CLICK).
9. Open Magisk -> Modules and update f2fs-loopback-bug-workaround module to the newest version (can be done only via Magisk Manager only if new version of f2fs-loopback-bug-workaround module is available).
10. Enjoy rooted Oreo.
UPDATE 03.10.2018
If you flashed everything as described in OP and noticed that you got stuck in boot, go to TWRP again and:
1. Uninstall Magisk using latest Magisk uninstaller.
2. Flash Magisk 17.1.zip AGAIN (yes.).
3. Flash f2fsfix-2018.9.2.zip
4. Enjoy rooted phone.
PS. I do not know why device does not start after first flashing to be honest, but these four steps above are confirmed by several users (and by me).
UPDATE 03.10.2018
XPOSED (be careful: Xposed for Oreo is still in BETA distribution and flashing it will break your SafetyNet!)
1. Open Magisk Manager -> Downloads.
2. Download Xposed Installer (the one from the screen below):
https://image.ibb.co/byLUuK/Xposed_Framework.png
3. Let Magisk install it.
4. Reboot.
5. Open Xposed Installer (you will see orange exclamation mark, don't worry).
6. Reboot once again.
7. Voila.
Hit THANKS if I helped!
Credits:
- @topjohnwu
- @rovo89
- @Artim_96
- @VR25

@rafikowy ah, so basically the problem was with dm-verity and forced encryption? That makes sense. So it would basically also work if you'd not extract the boot.img from the OTA zip and mod it with Magisk manager with both enabled and flash that (might be easier than flashing normal Magisk and then make the changes), so you'd basically just flash the img and the module zip in TWRP.
Well, if no bigger bugs appear I might try the Oreo OTA and root tomorrow. Don't think it will be here on its own till then, even if it's already the official rollout (Indian and brasilian users seem to get it officially)

First magisk manager did not want to open, but a reboot solved. thanks

So, Lenovorola is still "undecided" in regards to patching F2FS.
I wonder why...

Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Only a Soak test is available, the link is in the thread in the ROM section. And yes, it doesn't seem to update your bootloader, it was already successfully testet to go back to 7.1.1

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120

not work - moto z play - oreo soak
Unfortunately it does not work. : (TWRP prompts for a PIN to decrypt data.) How to select cancel and install Magisk on installation f2fs-loopback-bug-workaround-2018.1.31.zip displays an error that does not detect magisk or is incompatible. How do I format the date everything is installed but the phone does not turn on... Any idea?

Sorry but, if verity is enabled, that means you are unable to modify /system files?

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
You can go back, problem is you will lose IMEI by going back to Nougat.

huma_dawii said:
You can go back, problem is you will lose IMEI by going back to Nougat.
Click to expand...
Click to collapse
I gone back to 7.1.1 Nov patch and everything is OK with my IMEI. Just flash 7.1.1 Plus ROM with TWRP. One issue what I have - In can't mount OEM partition in TWRP.

Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them

Camarda said:
Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them
Click to expand...
Click to collapse
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.

St.Noigel said:
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.
Click to expand...
Click to collapse
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now

Camarda said:
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now
Click to expand...
Click to collapse
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))

Can i go back to 7.1.1 and relock bootloader ??
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance

LovinVEVO said:
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance
Click to expand...
Click to collapse
Nope. It's impossible for now. You can`t go back to full stock, because you'll lose your IMEI with flashing full 7.1.1 FW with RSD or fastboot.

St.Noigel said:
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))
Click to expand...
Click to collapse
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.

Camarda said:
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.
Click to expand...
Click to collapse
If you have bootanimation - just wait few minutes

St.Noigel said:
If you have bootanimation - just wait few minutes
Click to expand...
Click to collapse
Just waited for 30 minutes. It wont boot

Software update whit root and Twrp

Hello friends, this morning I skipped the update 11.0.5.0 on my xiaomi Mi 9t Global, but I have a Root and TWRP user and I would not like to have to revert that to be able to install the update there is some way to update it without losing root and twrp? I would appreciate the help AND SORRY FOR MY BAD ENGLISH

Hello,
If you don't want to lose TWRP after OTA update => Use TWRP OrangeFox Recovery (10.1_1) => https://files.orangefox.tech/OrangeFox-Stable/davinci/OrangeFox-R10.1_1-Stable-davinci.zip
You can't keep "root", but it's simple to flash again Magisk zip installation in TWRP...
Question: What Magisk modules did you install?
Info: It's safer to download and install Full package update (=FullOTA) instead of simple OTA.

Micdu70 said:
Hello,
If you don't want to lose TWRP after OTA update => Use TWRP OrangeFox Recovery (10.1_1) => https://files.orangefox.tech/OrangeFox-Stable/davinci/OrangeFox-R10.1_1-Stable-davinci.zip
You can't keep "root", but it's simple to flash again Magisk zip installation in TWRP...
Question: What Magisk modules did you install?
Info: It's safer to download and install Full package update (=FullOTA) instead of simple OTA.
Click to expand...
Click to collapse
Thank you very much for your help I got the Complete File of the OTA update and I Installed it with TWRP And before restarting I applied Magisk as you told me and this is the result.
THANK YOU VERY MUCH FOR YOUR HELP I AM SOMETHING NOOB EVEN WITH XIAOMI AND I WAS AFRAID TO BRIKE MY TERMINAL BUT WITH YOUR HELP I HAVE LEARNED SOMETHING NEW FOR THE FOLLOWING TIMES
:laugh::fingers-crossed:
And on the magisk modules that I installed I leave you a ScreenShot

I leave the download link of the file fullOTA Global 11.0.5.0 in case someone wants to install it : https://mirom.ezbox.idv.tw/en/phone/davinci/

As a fellow user of a stock rom, I can recommend OrangeFox as taking OTA updates with it is SO much easier. Make sure you follow instructions to get it set up, then you just take OTA like stock. When you have to flash the full OTA, it's a great time to switch as that's part of setting up OTA on Orangefox

kdb424 said:
As a fellow user of a stock rom, I can recommend OrangeFox as taking OTA updates with it is SO much easier. Make sure you follow instructions to get it set up, then you just take OTA like stock. When you have to flash the full OTA, it's a great time to switch as that's part of setting up OTA on Orangefox
Click to expand...
Click to collapse
I am going to try to install OrangeFox recovery, but how can I configure it for OTAs?

iGamesMaximus said:
I am going to try to install OrangeFox recovery, but how can I configure it for OTAs?
Click to expand...
Click to collapse
There's a guide linked in the post. There's no point in me typing up the same thing. Please refer to the official documentation linked in the post as that will always be correct and up to date.