Database Users

lg g2 bricked

hello, i just tried to flash cloudyg2 3.3 and i have bricked my d802 16gb. i had stock lp and had rooted and installed twrp did the wipes (no internal), got the right lp bootstack and used the right settings, so i really dont know what went wrong.
the symptom is that lg logo show for a fraction of a second and then a washed out gray on top of screen that fades away slowly. also while connected in pc it reads like many many drives.
on the bright side i can enter recovery/download modes. in my original attempt i used the bumbed sign, on my tries to fix it i also used the loki one, same deal.
seems like i have no recovery file, i thought i did it with one of the programs i installed, but since i am newbie seems like i misunderstood. so no recovery file
any help?

solution found:
1.Download the latest TWRP from blastagator here.
2.Flash it with your current recovery, reboot into that new recovery.
3.Download SRKG2 rom (by somboons) here.
4.This rom is a full stock rom with some debloat and custom camera. Wipe /system/ /cache/ /dalvik-cache/ /data/ and flash it (choose any options, it's not important since you'll be only installing this rom because it also upgrades other partitions to a lollipop supported version.
5.Boot into the rom and reboot into recovery again. (If you are unable to boot or the boot is taking too long like 10 minutes, shut down, go to recovery again and perform a factory reset, the one that makes you type 'yes' in the keyboard and you should be fine).
6.Download CloudyG2 3.1 and wipe /system/ /cache/ /dalvik-cache/ /data/ again.
7.Flash the rom choosing the correct version of your phone (among other preferences) in the aroma installer.
8.Boot and enjoy!
i cant post link of the solution cause i am new, but many thanks to him. i still dont understand what went wrong, but my hypothesis is that i shouldnt install the lp bootloader since i was in lp anyway.
i hope it helps anyone with similar problem.
cheers

you are in qhsusb bulk 9006 souse srktool to unbrick
---------- Post added at 07:22 AM ---------- Previous post was at 07:20 AM ----------
that becuase wrong bootleader u must use bump kk bootleader then reboot recovery and flash rom

Can not change lte to 3g can someone please...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D800 using Tapatalk

Galaxy A700FD bootloop after updating SuperSU

Hi there, I've been having problems with the Titanium Backup recently and tried some troubleshooting method such as unticking Mount namespace separation in SuperSU. They didn't work until i get to the point on updating the SuperSU from Play store. Then asked me to update the binary which i selected TWRP and it rebooted. After the installation from TWRP, it only boots to recovery. Tried turning off the phone and it still go to recovery even if i select reboot system.
Now i tried re-flashing the 'CF-Auto-Root-a7lte-a7ltexx-sma700fd.tar' via Odin3. It completed but then it's only boot looping. Sure i know it would reset multiple times but it has been more than 30mins doing like that over and over again. Tried to flash the TWRP again via Odin and wiped data/system/cache. And tried installing the Ressurection rom but it fails it gives me error "E:Error executing updater binary in zip '/external_sd/A7 Root and all/Roms/RessurectionRemix........"
Error flashing zip........
Then tried rebooting system. It said no OS installed proceed to reboot then saying device does not appeared to be rooted and asked me to install SuperSU which I did and it just restarted and still on boot loop....
Any help, please? TIA

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what happen when i try to flash the firmware that i downloaded from sammobile... please help.
On the recovery, whenever i try to reboot, it says No OS installed. Then SuperSU installation. Whenever i try to install a custom rom, it fails. Giving me error: error executing updater binary in zip...

gsmtec said:
flash latest version for you model, should work
Trimis de pe al meu SM-G920F folosind Tapatalk
Click to expand...
Click to collapse
which one? CF auto root? firmware? thanks for replying..
btw im flashing the latest ones. except the SuperSU which I will try later. But the No OS installe would be the problem i think?

gsmtec said:
flash latest 6.0.1 version for your region or for the one that phone came
Click to expand...
Click to collapse
not sure but when i clicked earlier it was all china versions. and on first click on something it selects other something like samsung camera. but now i was able to see the firmwares. guess the site have some bugs. imma try it.
there's no 6.0.1 on my region. only 5.0.2 and lower versions.. i take the 5.0.2?

Lollipop 5.0 for Lenovo A536

Lollipop 5.0 for Lenovo A536 by darklord4822 and SRT team
language:multilanguage(including english)
screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note
Firmware 5.0 based on 3.10.54 kernel.
INSTALLATION And Download (TWRP)
Before flashing backups first and then Wipe data and cache (optional-others caches etc)
*Download: Lollipop 5.0 (ROM)
*Download GAPPS
*Flash Lollipop 5.0 spflash
*Flash Gapps (use lollipop version)
PATCHES
Download: Patch for Lollipop 5.0
Download: Boot_lp_rev1.img - Fixed connection / disconnection headphones + fix photos with flash
Download: Boot_lp_rev2.img - For those who have issues with front camera and auto-rotation
Download: Boot_lp_rev3.img - For those who working front camera, but no auto-rotation
Download: Boot_lp_rev3.img - For those who issue with front camera, but works auto-rotation

Boot_rev1.img is this can flash on CM12.1 LENOVOA536?

renren28 said:
Boot_rev1.img is this can flash on CM12.1 LENOVOA536?
Click to expand...
Click to collapse
No,can you explain which cm 12.1,If you are using cm 12.1 based on kernel 3.4.67 ,please dont do it, it may brick your device.The patches are exclusively for this rom.(3.10 kernal)

How to install the .img files?

NichLhuigi said:
How to install the .img files?
Click to expand...
Click to collapse
Tap on Install in the TWRP main screen.
Now, the default mode is to flash zip files, you will need to toggle the mode to images.
To do so, tap on the Images… button on the bottom-right of the screen.
The recovery will now only see the image files, select the one you desire to flash, this could either be a system or boot image file.
Once you select, you will be prompted to select the type of image it is, select Boot or system corresponding to the image file you selected.
Finally, swipe the button on the bottom of the screen to start the flashing process.

how to fix autofocus ?

Trying to install this Lollipop 5.0 using TRWP Recovery 3.0.0. and get the 'Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Someone please advise and thanks in advance.

Lazerkitty said:
Trying to install this Lollipop 5.0 using TRWP Recovery 3.0.0. and get the 'Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Someone please advise and thanks in advance.
Click to expand...
Click to collapse
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.

test_only said:
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.
Click to expand...
Click to collapse
Yeah did that. Works but it has some problems and also, it says its for Lenovo S660.
There are problems with the ROM as it keeps asking if I want to switch to SD card as default write disk, screen flickers bad...and its identifying the phone as a different model which can cause problems installing other apps not intended for this model....I'm guessing that last part.
Right now I am trying to find the latest stable Marshmallow ROM and not seeing one that works.
Any ideas? Too bad there is no Resurrection Remix ROM for this model.
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
test_only said:
The rom is not flashable zip, extract it and flash it on spflashtool using computer, gapps and patches can be flashed on twrp.
Click to expand...
Click to collapse
Thank you for the reply and support :fingers-crossed:

Please help me
After i installed the rom
I turned my phone on
And then all the things is working
But the wifi is not
It always says authenticating and then
After that it says authentication problem or something pelase help btw i tried doing the
Advamced options but its not working please help

Josh Lovv said:
Please help me
After i installed the rom
I turned my phone on
And then all the things is working
But the wifi is not
It always says authenticating and then
After that it says authentication problem or something pelase help btw i tried doing the
Advamced options but its not working please help
Click to expand...
Click to collapse
Check your wifi password if incorrect

Aweome ROM but autofocus is a problem. Any ideas, please?

Hi all
This is just the best ROM for my phone I've found, love it, but autofocus doesn't work with any of revisions of boot. I see the autofocus question still has no answer, that's very sad. Am I forced to upgrade to CM because of autofocus only? I like this vanilla Lolipop very much, everything works just great, battery runs 1,3 times longer than on stock Lenovo ROM
Let me know if I can help with testing
Thanks!

[ROM] XenonHD Pie for Zenfone Max M2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well the procedure is the same of MIUI rom, the difference is that i have builded first the rom and after converted it into a Treble AB Image.
1) Flash the firmware .48 Pie, unlock the BL and flash the Pitch Black Recovery
2) Assure that in recovery is unchecked the option "Disable DM Verity", format and wipe data, dalvik and cache and flash this force decryption - DO NOT WIPE SYSTEM OR VENDOR!
3) In the follow order flash first this boot patched for .48, then this system image and after latest Magisk.zip
4) Resize the system partition in the wipe advanced menu and reboot in system. These steps to follow are very important. You will take a bootloop but don't worry!
5) Return in recovery, flash the Permissiver V4 by ErfanAbdi and after reboot in system. New bootloop. Now return again in recovery and use the follow patch. Insert this file (by pitch black file manager) into system/system/etc/permissions (if you don't find this specific path means that don't have followed the steps correctly!) and give to it chmod 755
6) Now, at the next reboot, the rom should boot. Don't flash any zip of gapps, otherwise you will take a new bootloop.
I have realized this rom with ashusharma's trees modified by me and using the latest kernel asus .48 always patched by me, you can build other roms using these sources but remember always to convert the ROM into AB Treble Image with ErfanGSITool and apply the patches for bootloop.
That's all!!!
BUGS
Installation of Gapps or set of any security pattern lock create bootloop at reboot

Great bro, i try

wait i m having issues now....wait that finish to test and update the correct procedure

Ok issues resolved. Follow the guide step by step

fosseperme said:
Ok issues resolved. Follow the guide step by step
Click to expand...
Click to collapse
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error

Eolvand said:
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error
Click to expand...
Click to collapse
MTP works...you must select the mode usb in developer option

Please make it official

Link is not working

Samsung Galaxy J5 2016 - Android 7.1.1 - Rooted - Magisk install failing

Hi there,
I've recently taken the plunge and decided to root my phone. I followed all the instructions and everything went fine except I can't get Magisk to install. When I run root checker it confirms my phone is successfully rooted, see screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But when I go into Magisk it fails the installation saying 'Unable to check signature'. See screenshots below
Looking at the installation instructions here https://topjohnwu.github.io/Magisk/install.html I believe as Ramdisk is 'Yes', then my phone is ready to install Magisk. I believe that if I patch my phone with a boot.img file then I should be able to successfully install Magisk. However, 1) I'm not sure it will given the error I'm getting and 2) wherever I search I cannot seem to download the correct firmware for my phone to be able to get the correct boot.img file that I need. Here are the screenshots showing the installed software version.
I'd be super appreciative to anyone that can advise me as to what to do next to try and resolve the installation issues so that I can benefit from the wonders of Magisk.
Thank you

f19fox said:
Hi there,
I've recently taken the plunge and decided to root my phone. I followed all the instructions and everything went fine except I can't get Magisk to install. When I run root checker it confirms my phone is successfully rooted, see screenshot.
View attachment 5290275
But when I go into Magisk it fails the installation saying 'Unable to check signature'. See screenshots below
View attachment 5290281View attachment 5290283
Looking at the installation instructions here https://topjohnwu.github.io/Magisk/install.html I believe as Ramdisk is 'Yes', then my phone is ready to install Magisk. I believe that if I patch my phone with a boot.img file then I should be able to successfully install Magisk. However, 1) I'm not sure it will given the error I'm getting and 2) wherever I search I cannot seem to download the correct firmware for my phone to be able to get the correct boot.img file that I need. Here are the screenshots showing the installed software version.
View attachment 5290293View attachment 5290297
I'd be super appreciative to anyone that can advise me as to what to do next to try and resolve the installation issues so that I can benefit from the wonders of Magisk.
Thank you
Click to expand...
Click to collapse
Flash magisk zip in via recovery

Austinredstoner said:
Flash magisk zip in via recovery
Click to expand...
Click to collapse
Hi. Thank you for your reply and advice. I flashed Magisk using TWRP recovery but it still won't install. Here is the screenshot. I also uninstalled the App and re-downloaded as per these instructions https://bit.ly/32P3Z9z but I still get the same error
Do you or anyone else have any more suggestions please?
Thanks!

@f19fox: Apologies to be hijacking your thread.
Build Number: NMF26X.J510FNXXU2BRJ4
Android Running Version: 7.1.1
I downloaded the IMG file of the BRJ4 raw boot image from firmware.mobi, successfully patched it via the Magisk app, and subsequently flashed the patched boot image via TWRP (selecting the boot partition within TWRP).
However, the Magisk card within the app still displays N/A within the app.