[solved]
Hello,
tried to install Nougat Revolution. It didn´t work correctly.
At the moment TWRP Revolution for nogut is installed. But I´m not abled to mount system or data.
Tried to flash system via fastboot. Everytime I got an error (sparse flash write failure).
At the moment I´m only able to run TWRP but not able to install any firmware because I have no acces to DATA or System. Tried to wipe boath partition. Its not possible.
Any Ideas?
That's a known mistake to be fixed later. For now, flash FW via ADB sideload, it works in spite of the error warnings (own experience).
Klorec said:
That's a known mistake to be fixed later. For now, flash FW via ADB sideload, it works in spite of the error warnings (own experience).
Click to expand...
Click to collapse
Is it also possible to install the old firmware? The Stock?
I get also an error when I try to sydload it: K32 crc faliure
p9ben said:
Is it also possible to install the old firmware? The Stock?
Click to expand...
Click to collapse
p9ben said:
I get also an error when I try to sydload it: K32 crc faliure
Click to expand...
Click to collapse
There are many guides on how to install the stock firmware around. I, unfortunately cannot help you, why don't you try asking directly in the Revolution Recovery thread instead of creating a new insufficiently-named thread? The Revolution dev will be more likely to notice your question and help you.
p9ben said:
I get also an error when I try to sydload it: K32 crc faliure
Click to expand...
Click to collapse
have you tried the 3 button method?
Thank you for your help.
The only way two safe the phone was to install MM with the 3 Buttons and the patched oeminfo. The OEMinfo only works with B150. With other versions its not possible.
After Reinstall all now works fine! Thank you for your help.
Regards
Related
I cant boot in twrp/cwm recovery. I fully rooted phone, got SuperSU, but I can only go into default android recovery, even with twrp and cwm installed. What might be the problem?
shomy993 said:
I cant boot in twrp/cwm recovery. I fully rooted phone, got SuperSU, but I can only go into default android recovery, even with twrp and cwm installed. What might be the problem?
Click to expand...
Click to collapse
Probably didn't install correctly. Try re-installing (remember if TWRP you have to reboot into TWRP before Android) it may fix it.
radicalisto said:
Probably didn't install correctly. Try re-installing (remember if TWRP you have to reboot into TWRP before Android) it may fix it.
Click to expand...
Click to collapse
I tried reinstalling both files, deleting cache, recovering to factory firmware, but none of it works :/
shomy993 said:
I tried reinstalling both files, deleting cache, recovering to factory firmware, but none of it works :/
Click to expand...
Click to collapse
What model number? - firmware version ? -- could be a bad download also -- try downloading ti again - have the right version ?
radicalisto said:
what model number? - firmware version ? -- could be a bad download also -- try downloading ti again - have the right version ?
Click to expand...
Click to collapse
n9005xxumi6
Try downloading it again, check the MD5 and see what happens, (could just be a bad download) then install. -- If not head over to the TWRP thread and ask there @bigbiff is responding quickly to questions.
radicalisto said:
Try downloading it again, check the MD5 and see what happens, (could just be a bad download) then install. -- If not head over to the TWRP thread and ask there @bigbiff is responding quickly to questions.
Click to expand...
Click to collapse
Ok, thanks mate!
Still not solved :/ Pls help
shomy993 said:
Still not solved :/ Pls help
Click to expand...
Click to collapse
Are you installing with odin
Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.
strykrmas said:
Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.
Click to expand...
Click to collapse
Hi, check this Post: here
Greetings
Thanks bro....
cronociclope said:
Hi, check this Post: here
Greetings
Click to expand...
Click to collapse
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...
strykrmas said:
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...
Click to expand...
Click to collapse
Unlock the bootloader again.
cronociclope said:
Unlock the bootloader again.
Click to expand...
Click to collapse
It appears to be still unlocked... According to fastboot
strykrmas said:
It appears to be still unlocked... According to fastboot
Click to expand...
Click to collapse
When the mobile phone turns on the orange letters?
cronociclope said:
When the mobile phone turns on the orange letters?
Click to expand...
Click to collapse
Yea... Its still there
strykrmas said:
Yea... Its still there
Click to expand...
Click to collapse
Unlock the bootloader even if it says it's unlocked.
Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help
strykrmas said:
Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help
Click to expand...
Click to collapse
In TWRP > Mount > untick and re-tick /data and then try formatting it.
Yip tried tht too... So the phone started back but it's reverted back to its original state... Locked bootloader, unrooted etc...
I can provide full service firmware VNS-L23C605B370 / VNS-L23C605B364 / VNS-L23C605B121
Ok... But can I use any of those tht you've outlined safely, becuz my phone works fine so far but it appears the data partition is damaged. Also the twrp recovery im using is 3.0.1 so I gonna try updating it.
Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?
install vns-l23c605b362 ou b374 with twrp
strykrmas said:
Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?
Click to expand...
Click to collapse
Hello
as I see you can use twrp 3.0.
then, from then b120 MM.
1 bootloader code.
2 installs twrp.
3 go to wipe. check all except SD card.
4 go to install, install update.zip b362 and install update datafull.zip b362.
5 restarts.
here is.
2017.02.25 VNS-L23C605B362 update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77299/f1/full/update.zip
update datafull http://update.hicloud.com:8180/TDS/...-L23_hw_la/update_data_full_VNS-L23_hw_la.zip
now, for vns-l23c605, there is a firmware b374.
you can install it too.
to do it.
you had to download all the files (full-ota-mf-pv b362+full-ota-mf b374) to your computer and handle them with winzip.
look at this post ( the video and the photo). https://forum.xda-developers.com/huawei-p9lite/how-to/update-p9-lite-nougat-ota-s-officials-t3661906
firmware
2017.10.19 VNS-L23C605B374 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v100268/f1/full/update.zip
file public http://update.hicloud.com:8180/TDS/...68/f1/full/public/update_data_full_public.zip
file update full http://update.hicloud.com:8180/TDS/...l/VNS-L23_hw_la/update_full_VNS-L23_hw_la.zip
Source firmware http://pro-teammt.ru/firmware-database/?firmware_model=vns-l23c605&firmware_page=0
took your time reading everything before doing things.
Huawei P9 lite Chinese version
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.
labutes said:
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.
Click to expand...
Click to collapse
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.
Chisetdel31260 said:
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.
Click to expand...
Click to collapse
Modelo: huawei VNS-AL00
Versão: VNS-AL00C00B230
CPU qualcoom sanapdragon
3 Gb Ram
yes i have the bootloader code
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
ms.journie said:
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
Click to expand...
Click to collapse
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Omg this saddens me! So there's no way I am unable to at least retrieve my pictures?
Scott said:
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Click to expand...
Click to collapse
Have u tested change boot partition ?
yup
J3zz said:
Have u tested change boot partition ?
Click to expand...
Click to collapse
ms.journie said:
yup
Click to expand...
Click to collapse
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
J3zz said:
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
Click to expand...
Click to collapse
ms.journie said:
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
Click to expand...
Click to collapse
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
J3zz said:
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Click to expand...
Click to collapse
ms.journie said:
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
Click to expand...
Click to collapse
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ? Then boot and uninstall the "****in" fantastic module... maybe it works
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
J3zz said:
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ?
Click to expand...
Click to collapse
ms.journie said:
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
Click to expand...
Click to collapse
Good luck !!
I saw this happen when I used the official TWRP app.
It went away when I used this TWRP. Hope that helps.
I'm glad you already know not to use the MSM tool. Too many people jump straight to this.....
You just need to boot the correct recovery and your data will decrypt, and you will be able to back it up to a PC, then you can reload your ROM via TWRP or Fastboot to get the phone bootable again. So now it's a question of what ROM were you running before. Do you need a recovery with the latest security patch or something older? What TWRP are you running. Try 3.3.1-6 psychen6 linked too first. Boot that image from Fastboot. See if your password/pin will work to decrypt your data.
Hello, I was trying to root my phone last night, I unlocked the boot loader that worked perfectly, easy. Nothing else went well, I was fighting with it TWRP for hours and then Magisk wouldn't install. I gave up on that and tried SuperSu... now the phone just stays on the loading screen instead of booting, It won't boot into recovery either just fastboot. Can it be fixed?
Your phone is soft bricked and can only boot to bootloader, correct?
The only solution is flashing the stock ROM of the device. You can get your device (Tissot) stock ROM from here.
I just got it to boot into TWRP, after it cycled a few times.
Well that may make it easier, you can try wiping dalvik cache then wiping data and see if that works. Needless to say wiping data is going to delete all your personal data, but since you're in TWRP recovery you can back it up.
Wiping it didn't work, I'm trying to use MiFlash I have downloaded "Tissot_9.0_V10.0.10.0.PDHMIXM_Fastboot" my phone is in fastboot. MiFlash detects it but when I try to flash I just get "can not found file flash_all_lock.bat"
How do you tell is MiFlash has successfully installed drivers, it gives me a window in Chinese?
If it's not working - I never thought it would anyway - then your only option is to flash stock ROM.
You can try using fastboot commands through cmd window, if it returns <waiting for device> or something similar then the driver isn't installed properly. Alternatively you can install the driver from here.
Thanks, it detects my phone. How would you recommend flashing the stock ROM? Do I need to use the same version the phone was running before?
galaxymini1 said:
Thanks, it detects my phone. How would you recommend flashing the stock ROM? Do I need to use the same version the phone was running before?
Click to expand...
Click to collapse
You can use any version as long as it is meant for your device. Flashing the latest version might be best option.
Happy to help.
I tried flashing it with TWRP but just got "no digest file found" I'll try again tomorrow.
This must be the most annoying thing I've done with electronics in years, nothing wants to work.
galaxymini1 said:
I tried flashing it with TWRP but just got "no digest file found" I'll try again tomorrow.
This must be the most annoying thing I've done with electronics in years, nothing wants to work.
Click to expand...
Click to collapse
Lemme guess, you have TWRP v3.2.2-0? Try flashing the latest version from here.
XDHx86 said:
Lemme guess, you have TWRP v3.2.2-0? Try flashing the latest version from here.
Click to expand...
Click to collapse
v3.2.1 anyway it's gone now, I got it booting with the guide on https://xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1/
probably the best written one I've found.
Now to try and root it again...
galaxymini1 said:
v3.2.1 anyway it's gone now, I got it booting with the guide on https://xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1/
probably the best written one I've found.
Now to try and root it again...
Click to expand...
Click to collapse
You can find that in an XDA revised article here.
I got TWRP and Magisk installed no problem. I don't know if I was just tired or it was the crap guides but nothing wanted to cooperate on my first attempt.
Thanks for all the help.