Related
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse
KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.
i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate
I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.
Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..
Thx a lot! Worked like a charm! :good:
i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate
ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible
Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
Hi guys
I know its a long shot to expect a reply on here with a Korean G2 but......
Does anyone know where i can download the 4.4.2 firmware (TOT file) and dll for the G2 F320K ?
I've just managed to update the phone to 4.4 using the TOT method and root it with iroot but ive just seen there's a 4.4.2 update but i cant find the TOT file for it anywhere
Thanks ;(
Anyone ??
I've not had one reply on here to any of my threads
Bulldog666 said:
Anyone ??
I've not had one reply on here to any of my threads
Click to expand...
Click to collapse
hello , why u want TOT file ? u can download .kdz file and its available in many websites
android_for_all said:
hello , why u want TOT file ? u can download .kdz file and its available in many websites
Click to expand...
Click to collapse
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Bulldog666 said:
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Click to expand...
Click to collapse
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
android_for_all said:
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
Click to expand...
Click to collapse
Thanks again for the reply
I've tried those methods an it gets as far as loading the support tool and everything look like its working with the % going up, but then it gets stuck at 49%.
I've looked on some forums and this seems to be a common problem but I've tried all the solutions posted and none of them work.
The only way I'm then able to bring the phone back to life I'd by using the TOT method.
I'm even having trouble installing a recovery as they all seem to boot me into a black screen
I just tried it again and it seems that when it gets stuck at 49% it give this error:
Indirect Internal / PC to Phone send start
FIXED
For anyone else having this problem then just use these settings instead:
in RD test tool, choose: CDMA instead of 3GQCT
CS emergency instead of diag
then click on CSE web upgrade test instead of normal web upgrade test.
That should stop you getting stuck at 49%.
Does anyone know of a Universal DLL we can use to flash Our KDz posted 12-24-16 on LG
Ickyz said:
Does anyone know of a Universal DLL we can use to flash Our KDz posted 12-24-16 on LG
Click to expand...
Click to collapse
Do you need a dll with a KDZ? I thought the DLL was only needed for the .TOT files?
I thought so ....
I've never used it so good question
Ickyz said:
I thought so ....
I've never used it so good question
Click to expand...
Click to collapse
ah, Yeah I think KDZ's you use the LGUP tool which is descriped in another thread They don't appear to need a dll for the kdz. So I believe the dll is TOT only. I could be wrong as i'm not an expert on it, but I believe that's that process.
Has anyone successfully reflash there VS995 with this KDz yet?
Im not even trying to Root my 2nd Unit until I have all GOOD
Well I managed to Get LGUP running & it picked up my phone im still Stock no Root & it fail'd at 9% for tho those's who need to know, Maybe try flashing it more then once. I also ran into a problem with LGUP not finding my device so i had to copy & paste the common folder elsewhere
Yeah I ran into the same problem. 0x2000 error. CEFS:Initalize(). Terrible!
*edit*
Ran the uppercut method (link)and was able to flash the kdz on a stock non-rooted vs995! Just with a grain of salt, uppercut is recognized as a virus by some AV, but I took the risk and checked it out and it looks like it's just a false positive because it modify's another programs files in memory... so use at your own risk!
Thanks a million everyone, I finally fixed my Lg v20 vs995! I kept having failure trying it with Uppercut, but I finally saw that I needed to install 3 files to get it to work correctly, 1st you need the kdz file: VS99512A_06_1114_ARB00.kdz, next you need to install 2 driver files, LGUP_Store_Frame_Ver_1_14_3_3.msi and LGMobileDriver_WHQL_Ver_4.1.1.exe, and of course have UPPERCUT.exe. Finally after installing all of the correct drivers, and loading UPPERCUT, using the VS99512A_06_1114_ARB00.kdz, I finally got it to work and you have to choose "UPGRADE" in UPPERCUT, but I completely restored my phone to factory!!! What a frickn blessling, I am so happy, because I was trying for days to fix this..... and I actually threw this phone in the trash, hehehehehe, but something made be take it out of the trash an hour later, THANK GOD!
Link to the KDZ for vs995?
can anyone please direct me to the KDZ for VS995?
LGUP will not refurbish my phone. when i try to restore i have to use upgrade and i want to refurbish but LGUP gives error and says
kdz file does not support refurbish process. i had a v10 once and had no problem restoring kdz on v10 has lg change kdz files so that you cant do a full re flash here is pics please help and does has any one else have this problem. thanks and hope someone could please help.
I believe this post would go better in the Questions and Answers section of the V20 forums: https://forum.xda-developers.com/v20/help
Jimhackthorn said:
LGUP will not refurbish my phone. when i try to restore i have to use upgrade and i want to refurbish but LGUP gives error and says
kdz file does not support refurbish process. i had a v10 once and had no problem restoring kdz on v10 has lg change kdz files so that you cant do a full re flash here is pics please help and does has any one else have this problem. thanks and hope someone could please help.
Click to expand...
Click to collapse
Why do you want refurbished? Isn't just flashing kdz or upgrading make the phone stock?.... I read somewhere the refurbished option doesn't work but maybe since that post I read about 2 months ago things have changed.
i have the same experience when i upgraded from 10i to 10j, error for refurbish, don't know why as i downloaded kdz file from the same source before
I too want to refurbish. I want to REPLACE every file on the phone instead of comparing it and replace only selected once.
The reason why i want to do it is because i get different apps preinstalled when i upgrade. It means process is not consistent.
NOt to mention i am having all sorts of problems with root. Its rooted but system apps are not removable while every other root function works.
Some apps also fail to read CDMA cells. Every time i flash using UPGRADE method, i get more weirdness layered on top of previous one.
THATS WHY