Instruction:
1.You need to upgrade to Android 2.3.3, please follow this instruction: http://droidangel.blogspot.com/2011/05/how-to-flash-updateupgrade-samsung_12.html
(If you already upgraded please go to step no.2) choose the one without bootloader.
2.Then time to root it: http://droidangel.blogspot.com/2011/05/procedure-how-to-root-samsung-galaxy.html
(If you already root, go to step no. 3).
3.Flash overcome kernel via Odin by go into download mode: http://www.ziddu.com/download/17518780/002001-Overcome_Kernel_v4.0.0.zip.html
(Do not choose re-partition on Odin) and check how much space do you have in the internal storage (not the total size of your tab).
4.Download the official MIUI http://forum.xda-developers.com/showthread.php?t=1324528
5.Put it into your SD card
6.Boot into recovery mode by press the power button and select Reboot -> Recovery.
7.Wipe data, wipe cache. Go to advance wipe dalvik cache.
8.Install Zip from SD card, select the MIUI zip file that you just download. Choose install it.
9.Reboot your Tap.
10.After that boot into recovery again and install this file: http://ubuntuone.com/7NUVkI862sTvgu5A14bbJk
11.Use ES File Explorer / Root Explorer to delete DroidSanArabic & Hebrew then reboot
12.Install Multiling Keyboard and Khmer plugin from Android Market.
That’s it!!!
Make sure you have System Space at least 1.3Gb. Otherwise you have to redo it again and again.
Use FriendCaster app for Facebook and CM7 Camera (http://www.mediafire.com/?czzy0o2u571ex8y) instead of Stock MIUI.
If you don’t have internal storage you will loss all your app every time you reboot!
Warning:
I hold no responsibility at all. Do it at your own risk!
Make sure you back up, before you flash anything!
YD206>YD201[HOW TO] Install latest RU.134+Root+Xposed+Free space in system partition
Note1: All commands are sent from "C:\Program Files (x86)\yotaphone_flasher"
Note2: Sometimes it looks like phone is stucked in boot animation. Please wait, cool your phone and wait. It Happened me a lot of times when I tuned this guide. But in this last it worked well. There was no need to restart phone.
1. install adb-setup-1.4.3.exe
2. install yotaphone2_flasher.exe
3. unzip 5.0.0-RU1.1.124.zip to "C:\Program Files (x86)\yotaphone_flasher\firmware"
4. unzip 4.4.3-S01-003-CN1.0.3.32a.zip to temporary folder
5. copy files from CN radio folder to "C:\Program Files (x86)\yotaphone_flasher\firmware\radio"
6. copy twrp_yotaphone2.img to "C:\Program Files (x86)\yotaphone_flasher\firmware"
7. enable USB debugging from developer options on your YotaPhone 2.
8. connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
9. turn off. Then start phone in bootloader (Power+down)
10. unlock boot loader with: fastboot oem unlock
11. flash prepared firmware by running yotaphone_flasher.exe and select 1. later confirm replace user data. Please check if all images are sent successfully. Otherwise restart your PC or increase RAM.
12. start phone, add your google account (for able to update build-in applications)
13. Upload via USB to folder Download:
UPDATE-SuperSU-v2.46.zip
xposed-v87-sdk21-arm.zip
XposedInstaller_3.1.1.apk
14. Update to 1.134 via OTA
15. Wait until all applications are updated
16. Turn off phone. Boot to bootloader (power+down)
17. Flash TWRP: fastboot flash recovery twrp_yotaphone2.img
18. Turn off phone. Boot to Recovery (power+up, hold longer 5-7 seconds)
19. in TWRP: Mount>System>Back
20. Do backup of system+data+boot (for sure), byt Backup>Select>Swipe
21. There is too low space in system (<10MB). We need to remove application which will be updated anyway to latest version from GooglePlay. Will have >300MB
22. Click: Advanced>File manager
23. go to /system/app
24. Find Books click on it. Now you see apk file for built-in "Google Play Books application"
25. Click bottom (Google Play Books) icon, then delete, then swipe, then back.
26. Continue with these folders:
/Books
/CalendarGoogle (Calendar)
/Chrome (Chrome)
/CloudPrint (Cloud Print)
/Drive (Drive)
/Galaxy4 (some animated wallpaper)
/Hangouts (Hangouts)
/HoloSpiralWallpaper (...)
/Keep Keep
/Lingvo-release (ABBYY Lingvo)
/Maps (Maps)
/Music2 (Google Play Music)
/Newsstand (Google Play Newsstand)
/OfficeSuite_Free (OfficeSuite)
/Videos (Google Play Movies & TV)
/YouTube (Youtube)
27. Go to main menu inTWRP, click Install
28. Find your prepared files and install it. (UPDATE-SuperSU-v2.46.zip, xposed-v87-sdk21-arm.zip)
29. Reboot to System
30. Install XposedInstaller_3.1.1.apk
31. Update Super SU in Play store
32. Run super SU, it will try to update Super SU binary by script in TWRP
33. Later find Xposed application, download your programs and use
Questions to you guys, because now I can't test it. Is it needed to start flashing with 4.4.3EU, because i saw it in one thread.
And please, if I forgot anything, let me know.
It takes long time after step 11, right? I'm still waiting...
gdw1986 said:
It takes long time after step 11, right? I'm still waiting...
Click to expand...
Click to collapse
After unlocking bootloader, the first boot takes a while, 30min more or less. Anyway, I suggest you to follow this guide which is kept updated: https://forum.xda-developers.com/yotaphone-one/help/guide-everything-to-yotaphone2-t3547194
TheArt. said:
After unlocking bootloader, the first boot takes a while, 30min more or less. Anyway, I suggest you to follow this guide which is kept updated: https://forum.xda-developers.com/yotaphone-one/help/guide-everything-to-yotaphone2-t3547194
Click to expand...
Click to collapse
Thanks a lot.:good:
Excellent manual!
I have small comment:
Step 2 - It's better change Original yotaphone flasher on YotaFlasherReworked.zip - it's from that theme.
1) Download the "updateL22.zip" 1.7GB one from this link https://drive.google.com/drive/folders/1eNOfMInD-7mooOuG8FiK_Gk-Hc7ddOGE
2) Download and install this Honor Unpack tool from this link
https://forum.xda-developers.com/showthread.php?t=2433454
3) Close the app and reopen the tool again with Admin permissions.
4) After opening the tool, Goto settings and disable all options under the "Extract" section.
5) Extract the "UPDATE.APP" from the first downloaded zip file.
6)Now, open the Honor unpack tool and select the three dot menu "..." And choose the UPDATE.APP file which you have extracted earlier.
7) Now select SYSTEM.IMG from the list and Right Click on it > Extract file and then extract it to any directory you wish.
8) Reboot your Honor 7X to bootloader.
9) open CMD at the folder where you have extracted SYSTEM.IMG and type the command
Code:
fastboot flash system SYSTEM.IMG
10) Wait a few minutes until the process has finished.
11) After that, reboot to recovery and wipe data, cache and dalvik-cache and rebooot.
Rollback has been completed!
Hit that Thanks button if it helped you.
Hi.
I want to share with you this version of TWRP for Honor 8 EMUI 8.
Working very well and supporting Internal storage.
Instruction
- Download this TWRP_for_Honor_8
- Download this two files from your FullOTA firmware.
update_data_full_public.zip
update_full_FRD-XXX_XXX_XXX.zip
- Instal TWRP_for_Honor_8 to Erecovery.
- In TWRP > Wipe > Format Data > yes
- In TWRP Install your two FullOTA firmware files.
- In TWRP > Advanced > Fix DataEncryption.
- Reboot the device.
Now you have TWRP with Internal storage support.
Thank's to S_mak from www.4PDA.ru
haykweb said:
Hi.
I want to share with you this version of TWRP for Honor 8 EMUI 8.
Working very well and supporting Internal storage.
Instruction
- Download this TWRP_for_Honor_8
- Download this two files from your FullOTA firmware.
update_data_full_public.zip
update_full_FRD-XXX_XXX_XXX.zip
- Instal TWRP_for_Honor_8 to Erecovery.
- In TWRP > Wipe > Format Data > yes
- In TWRP Install your two FullOTA firmware files.
- In TWRP > Advanced > Fix DataEncryption.
- Reboot the device.
Now you have TWRP with Internal storage support.
Thank's to S_mak from www.4PDA.ru
Click to expand...
Click to collapse
What will be the difference between installing twrp on internal storage than installing a twrp as recovery?
Thread closed at OP request
Custom Rom Xperia Z3CTW SGP611 Build 23.5.A.1.291_1290-4947_R2D By Mux
if you have questions or need files just PM me on XDA and i will try to help where i can...
the reason i made this tut is because there is almost no roms for this device available...
(not Responsible for any damages to device or peripherals through the process since there is always a chance something happens **but i had my device in almost every state and with the tools mentioned u should be able to revive it ** )
Included in this ROM (for you to build)
- Passes Saftynet
- Rooted with Magisk 20.4 (magisk hide working)
- Custom Kernel For Booting System and TWRP (made with rootkernel_v4.51_Windows_Linux.zip)
- Sony Ric Disabled / Enabled Depends on Rootkernel Config
- Netflix working
- Kernel can be set to Permissive via Terminal command.
- TWRP 3.0.2 (from Rootkernel_4.5.1)
- Remoteplay only works with Ric enabled and magisk uninstalled (make 2 boot.img for swapping in twrp)(due to sony device)
Apps i sugest u dl on ur rooted device
- FX File explorer
- Terminal for Android
- Netflix
- Vanced Manager
- Busybox (if needed)
IMPORTANT!! This Tutorial Ignores TA Partition So if you want to save them google How to Backup TA for SGP611 Before Following this Tutorial (some functionality can be regained through DRM opt in RootKernel
A Tutorial to Reproduce (*Do not Worry the Harder You Try The easier it gets)
1. Install Drivers for Fastboot and ADB in Device Manager for your device
- Boot Device to Fastboot by pressing Vol+ while Pluging USB Cable to PC Blue led indicates Fastboot Mode
- Go to Device Manager and Install Driver for S1boot
- Verify Driver installed Correctly
2. Install Flashtool Xperifirm, Flashtool Emma from Sony, Xperia Companion, copy Platform-tools folder to C:
(if u need any files PM)
3. Unlock Your Bootloader following instruction on Sony Developer Website (not going in to Details) *read warning above
before this
4. Download FTF firmware file With Flashtool Xperifirm For Your Device in My Case SGP611_23.5.A.1.291_1290-4947_R2D
By selecting XF Button in Flashtool after Closing xperifirm Flashtool will convert the files and they will be stored to
%user%\.flashTool\firmwares
5. Extract Kernel.sin Using 7zip or winrar from SGP611_23.5.A.1.291_1290-4947_R2D.ftf for patching boot.img
6. Open Flashtool and go to Tools menu select Sin Editor search and select the Kernel.sin Previously Extracted and press Extract
Data this will Create Kernel.elf
7. Go to RootKernelv4.51 Folder and copy the Kernel.elf there open CMD in address bar to folder and enter the command
(rootkernel kernel.elf boot.img) Select the option u like by Pressing y I selected all Options because I don’t have TA Backup
this will create a file Boot.img which is your Custom Boot Image if you want Recovery make Shure to say y when asked about
TWRP
8. Open PRFcreator and select all options click on the … for ftf and load the SGP611_23.5.A.1.291_1290-4947_R2D.ftf file
downloaded in step 3 click on the … for SuperSU and select the Magisk_20.4.zip set all check marks and create Flashable Zip
Zip is found in PRFcreator folder (this is your stock firmware zip)
9. Copy all files listed into a folder on your Internal storage
- Flashable-prerooted-signed.zip (created with PRFcreator)
- Moded Boot.img (Created with Rootkernelv4.51)
- Disable_ric_file.zip (if not moded in Boot.img)
- Magisk_20.4.zip (for Flashing Magisk After Flashing Boot.img)
10. Boot Phone in to Fastboot mode, Run CMD in address bar of Platform-tools folder, and Flash twrp 2.8.7.0 (yes will be
updated after Flashing Boot.img) by entering this command in ( Fastboot flash boot twrp-2.8.7.0-scorpion_windy.img )(**this
flashed to boot because u dont have recovery befor flashing the moded boot.img and this will be changed back by flashing
the stock ftf downloaded**)
if successful Unplug and boot tab it should boot to Teamwin TWRP recovery
11. In TWRP go to WIPE, Advanced Wipe, (Wipe: Cache, Dalvik-Cache, and System,)
before Flashing the Firmware Files
12. On main screen TWRP go to INSTALL and Install files following order
- Flashable-prerooted-signed.zip
- Moded Boot.img (by selecting flash image button at the bottom in TWRP)
- Disable_ric_file.zip
- Magisk_20.4.zip
13. Reboot to System Buy yourself a beer and Enjoy
where are the files ?