Database Users

How to install Khmer Unicode on Galaxy Tap P1000

Instruction:
1.You need to upgrade to Android 2.3.3, please follow this instruction: http://droidangel.blogspot.com/2011/05/how-to-flash-updateupgrade-samsung_12.html
(If you already upgraded please go to step no.2) choose the one without bootloader.
2.Then time to root it: http://droidangel.blogspot.com/2011/05/procedure-how-to-root-samsung-galaxy.html
(If you already root, go to step no. 3).
3.Flash overcome kernel via Odin by go into download mode: http://www.ziddu.com/download/17518780/002001-Overcome_Kernel_v4.0.0.zip.html
(Do not choose re-partition on Odin) and check how much space do you have in the internal storage (not the total size of your tab).
4.Download the official MIUI http://forum.xda-developers.com/showthread.php?t=1324528
5.Put it into your SD card
6.Boot into recovery mode by press the power button and select Reboot -> Recovery.
7.Wipe data, wipe cache. Go to advance wipe dalvik cache.
8.Install Zip from SD card, select the MIUI zip file that you just download. Choose install it.
9.Reboot your Tap.
10.After that boot into recovery again and install this file: http://ubuntuone.com/7NUVkI862sTvgu5A14bbJk
11.Use ES File Explorer / Root Explorer to delete DroidSanArabic & Hebrew then reboot
12.Install Multiling Keyboard and Khmer plugin from Android Market.
That’s it!!!
Make sure you have System Space at least 1.3Gb. Otherwise you have to redo it again and again.
Use FriendCaster app for Facebook and CM7 Camera (http://www.mediafire.com/?czzy0o2u571ex8y) instead of Stock MIUI.
If you don’t have internal storage you will loss all your app every time you reboot!
Warning:
I hold no responsibility at all. Do it at your own risk!
Make sure you back up, before you flash anything!

CЯEED v4 - Please help me.

I've read from page 1 to 23. Not overlooked any #.
I download "Creed_v4_Final_Build.zip" : Download link: Build # 3 (Final)
MD5 : ED1015AA1F19411D78ADB26CE3A60012 (downloaded 2 times the same check MD5 => normal rom file)
1. Copy "cwm-madteam-galaxY.zip" and "Creed_v4_Final_Build.zip" to SD Card.
2 . Flash stock S5360DDLK2 via Odin
3. Boot Into Recovery Mode. (Volume up +Home button +lock button)
4. Select "apply...". Then select the above downloaded file.
5. CWM will open. Data wipe.
6. Select "install zip..."->"choose zip..." Select the ROM zip.
7. Select yes. Data wipe. Restart.
8. Bootloop.
Tried a lot => bootloop
=> Anything I did wrong ?
Many thanks...............

Any PlayStore said:
I've read from page 1 to 23. Not overlooked any #.
I download "Creed_v4_Final_Build.zip" : Download link: Build # 3 (Final)
MD5 : ED1015AA1F19411D78ADB26CE3A60012 (downloaded 2 times the same check MD5 => normal rom file)
1. Copy "cwm-madteam-galaxY.zip" and "Creed_v4_Final_Build.zip" to SD Card.
2 . Flash stock S5360DDLK2 via Odin
3. Boot Into Recovery Mode. (Volume up +Home button +lock button)
4. Select "apply...". Then select the above downloaded file.
5. CWM will open. Data wipe.
6. Select "install zip..."->"choose zip..." Select the ROM zip.
7. Select yes. Data wipe. Restart.
8. Bootloop.
Tried a lot => bootloop
=> Anything I did wrong ?
Many thanks...............
Click to expand...
Click to collapse
You need to format system data cache and then mount system data cache in cwm before flashing a rom zip
Mount everything under the mounts & storage section
If system is mounted it will display "Unmount system"
If it say "mount system" select it so it changes to "Unmount system"
Do same for data & cache

marcussmith2626 said:
You need to format system data cache and then mount system data cache in cwm before flashing a rom zip
Mount everything under the mounts & storage section
If system is mounted it will display "Unmount system"
If it say "mount system" select it so it changes to "Unmount system"
Do same for data & cache
Click to expand...
Click to collapse
Thank you I will try and report.
------------
Similar results => bootloop
"Creed_v4_Final_Build.zip" have problems.
I follow the instructions => flash success "Build # 1(Creed_v4.zip)" and "Build #3(Creed_v4_Build_3.zip)" => restart no problem.

[Otus][Stock][5.1]TWRP Backup of Stock ROM[XT1506]

TWRP Backup file for MOTO E2 XT1506
TWRP Recovery version [WORKING]- 3.0.2
Note :
- Not responsible for any issues during restoring
Instructions To Restore :
- First download the Otus 5.1 TWRP Backup
- Thanx to @jyothi017 For 5.0 backup file..... You can download it from here Backup of 5.0 for otus
- Then extract the zip file to the Root directory of your SDCard or Internal Storage
- Boot into recovery
- Then Click on Restore Section
- Select Storage (Where you extracted the zip file)
- Then Reboot
- After boot when you come on main screen (i.e. After passing setup wizard)
- There will be a Notification in your notification panel showing uninstall sensor firmware
- Click on that
- Then click uninstall, it automatically reboots,no worries and then the sound works.
- That's it complete restoring is done.
I Hope this thread will be useful to u all who are searching for backup file for their OTUS
Hit Thanks.... and enjoy

shaktiman01 said:
TWRP Backup file for MOTO E2 XT1506
TWRP Recovery version [WORKING]- 3.0.2
Note :
- Not responsible for any issues during restoring
Instructions To Restore :
- First download the Otus 5.1 TWRP Backup
- Thanx to @jyothi017 For 5.0 backup file..... You can download it from here Backup of 5.0 for otus
- Then extract the zip file to the Root directory of your SDCard or Internal Storage
- Boot into recovery
- Then Click on Restore Section
- Select Storage (Where you extracted the zip file)
- Then Reboot
- After boot when you come on main screen (i.e. After passing setup wizard)
- There will be a Notification in your notification panel showing uninstall sensor firmware
- Click on that
- Then click uninstall, it automatically reboots,no worries and then the sound works.
- That's it complete restoring is done.
I Hope this thread will be useful to u all who are searching for backup file for their OTUS
Hit Thanks.... and enjoy
Click to expand...
Click to collapse
I tried flashing lineage 14.1 but failed. Was stupid enough to not make a backup. This was my first root. Downloaded the framework and flashed it. Works but still no sim card detected .radio off. WiFi and hotspot works. What were my mistakes ??.I don't remember the errors in twrp process... I'm using twrp 2.8.6 as suggested for my device moto e2015 otus XT1506. Any suggestions mockings are accepted .I'm here to learn

[OREO] How to download & install Oreo Beta 2 on Samsung S8+ and not lose your data!

This is for the Samsung S8+ (G955F) version only.
There’s a lot of misinformation out there regarding how to install the new Beta 2 for Oreo for Samsung S8+.
I thought I would put this guide out there as this was the easiest I found and the bonus is that you keep your data and just upgrade over the top.
All credit to jaron vdb from Telegram. This is his backup and he has given me permission to use it. He is the brains – I am just good at writing easy to use guides!
Pre-requisite:
-you need to have a working TWRP
-you need an external sd card
Steps:
1. Get into TWRP and backup your current rom to your external SD card. We will need this later to restore the data and importantly: if things go wrong you can always restore back again to what you have now.
Once it has been backed up you will have a folder on your external sd card that looks something like this:
Name of your External SD card/TWRP/BACKUPS/ce04873839487e8383/[the name of the file you just backed up in step 1]
2. Download this file and save it to your External SD CARD:
https://drive.google.com/open?id=1skCkpxUChw4rwxR7IBctSWhfkvJmQmqL
This is your TWRP restore file kindly provided by jaron vdb.
3. Once you have downloaded that file then you will need to unzip this file. Use something like 7zip from Playstore and extract that file you downloaded to this location you just created with Step 1 – something like:
External SD CARD/TWRP/BACKUPS/ce04873839487e8383/[the name of the file you just unzipped]
This is a very important step – you must extract the file you downloaded to this EXACT location.
4. Go here and download supersu 2.82SR5 to your external SD Card:
https://androidfilebox.com/app/supersu-root/
This is the only root version working at the moment – magisk does not work as of now. It is Supersu which works perfectly. It also has dm-verity on it so will allow you access to data in TWRP.
5. Ok we are ready to flash the Beta 2! Get into TWRP again
6. Hit the restore button and then go to your external SD Card and restore the file that you downloaded and had to extract. You will also see your other restore in there. Don’t touch that just yet.
7. Stay in TWRP and now go to Wipe and then go to Format Data and then type in yes
8. Stay in TWRP and now go to Restore and choose the first file you backed up in Step 1 – your original backed up ROM. Choose this file and then ONLY TICK data to install. Restore data.
9. Stay in TWRP and flash the supersu file you downloaded.
10. Reboot!
11. You now should be rebooted back into your original rom with the very smooth Beta 2 installed!
12. Now you have to make the fix so you don’t get a buttload of random reboots and Knox nonsense. Download Root Explorer or any build prop editor program from Playstore and change:
ro.config.tima=1 to ro.config.tima=0
and change Knox thingo to v30 like this:
ro.config.knox=v30
Mine was already on v30 but YMMV
13. Have a cup of tea.
Flash Oreo Firmware
You can also flash the new Oreo firmware BUT ONLY IF YOUR OEM UNLOCK CAN BE TOGGLED IN DEVELOPER OPTIONS. Otherwise you can’t flash this file:
All credit to Renovate for this file – remember – only flash if you can toggle OEM unlock in dev options:
Download here:
http://www.renovate-ice.com/firmware/g95x_oreo/json.php?download=latest
You’re done! Get outside now and see the sunshine!

I don't understand why you need to be rooted, can't you simply restore this twrp backup and proceed to use stock oreo?

biggerbeard said:
I don't understand why you need to be rooted, can't you simply restore this twrp backup and proceed to use stock oreo?
Click to expand...
Click to collapse
You can't get TWRP without root.
Edit:
Actually yes if you install custom recovery by odin then you don't require root. Good point!

how to do this
Flash Oreo Firmware
You can also flash the new Oreo firmware BUT ONLY IF YOUR OEM UNLOCK CAN BE TOGGLED IN DEVELOPER OPTIONS. Otherwise you can’t flash this file:
All credit to Renovate for this file – remember – only flash if you can toggle OEM unlock in dev options:

Is this flashable on G955FD? And will this make secure folder stop working?

[Treble][Rom]Lenovo zenui 5.0 for redmi note 6 pro

I found our device is treble supported type-A partition
So here i found (gsi) zenui 5.0 need to test
INSTALL
* Enable Treble > Flash a Fully-Trebled 8.1 ROM or just wipe data,cache,system
Mount the system, go to the system / etc directory backup selinux folder
Flash fbe disabler and permissiver
Wipe everything except vendor
Flash zui system flashme . zip
Mount system and vendor
Flash all patches
Flash sound fix
Mount the system to copy the selinux folder backed up in advance to the /system/etc directory.
Flash magisk if u need
* first reboot may take some time
Bootloop Fix:
- If you still have bootloop or systemui fc format data
Bugs:
- Nothing
(I'm not developer)
Android Version
- 8.1 Oreo
DOWNLOAD
https://mega.nz/#F!af4xQIKa!Ffz3u-9MOtFmxbDFUk9ZZg
PATCHES
https://share.weiyun.com/5khJ8F9

Thanks for sharing

thank for shearing but do you install it (screenshot?)