Need Android 5.01 Stock Rom for SGH-I337 - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hi XDA,
I'm looking for the SGH-I337 Android 5.01 Stock Rom Download to fix my soft-bricked phone.
Android system recovery <3e>
LRX22C.I337UCUGOK2
# MANUAL MODE #
-- Appling multi-CSC
Applied the CSC-code : ATT
Successfully applied multi-CSC
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD: ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
I know that I can't use a 4.3 or lower Rom because of bootloader issues(trust me I tried and all the gibberish above is confusing. I would really appreciate a working link. And some Help:good::laugh::victory:

As far as I know, the 5.01 ROM was only available via OTA. This may help: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814

audit13 said:
As far as I know, the 5.01 ROM was only available via OTA. This may help: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Click to expand...
Click to collapse
So I finally figured out that the .rar file needed to be extracted. I have slight dyslexia and read it as tar after like three downloads. Now I'm going to figure out how to root with towelroot and flash android nougat on my old friend.

You can't flash Nougat because the ROM will need TWRP and TWRP cannot be flashed to an AT&T s4 because it has a locked bootloader.

It's carrier unlocked. Is there anyway I can unlock the bootloader?

There is no way to unlock the bootloader.

audit13 said:
There is no way to unlock the bootloader.
Click to expand...
Click to collapse
thanks I'll just safestrap and find a touch wiz rom that doesn't have any samsung or att apps installed.

Related

[Q] Could not do normal boot ODIN MODE

I was trying to install TWRP on my AT&T Samsung S4 and now I am stuck on the downlode screen that says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: SHG-I337
CURRENT BINARY: Samsung Offical
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
WRITE PRODUCTION: Enable
I had just rooted using this method as I have a MF3 build:
http://forum.xda-developers.com/showthread.php?t=2387577
The purpose of this was to install stock Android. Can anyone please help me get my phone working again thanks.
dre_jarboe said:
I was trying to install TWRP on my AT&T Samsung S4 and now I am stuck on the downlode screen that says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: SHG-I337
CURRENT BINARY: Samsung Offical
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
WRITE PRODUCTION: Enable
I had just rooted using this method as I have a MF3 build:
http://forum.xda-developers.com/showthread.php?t=2387577
The purpose of this was to install stock Android. Can anyone please help me get my phone working again thanks.
Click to expand...
Click to collapse
Do you have MF3 firmware on your phone? Have you read the information you should have read about it? If not, I suggest you start with the "pinned" threads in the general and q&a sections and then read the threads that have MF3 in the title. Good luck.
http://forum.xda-developers.com/showpost.php?p=42320414&postcount=2

Knox Warranty Void: 0x1

I saw this on my bricked GS4 4.3.1(cyanogenmod 10.2) when I powered it on.
Any way to fix this?
It pops up on recovery mode and when I boot it up.
I really just want to get my S4 working again.
Can I just take it into some place like Best Buy or something and they'd help me?
Product Name: SGH-M919
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC BURST MODE enabled
oohrekt said:
I saw this on my bricked GS4 4.3.1(cyanogenmod 10.2) when I powered it on.
Any way to fix this?
It pops up on recovery mode and when I boot it up.
I really just want to get my S4 working again.
Can I just take it into some place like Best Buy or something and they'd help me?
Product Name: SGH-M919
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC BURST MODE enabled
Click to expand...
Click to collapse
Please tell me there is hope for me.
oohrekt said:
I saw this on my bricked GS4 4.3.1(cyanogenmod 10.2) when I powered it on.
Any way to fix this?
It pops up on recovery mode and when I boot it up.
I really just want to get my S4 working again.
Can I just take it into some place like Best Buy or something and they'd help me?
Product Name: SGH-M919
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC BURST MODE enabled
Click to expand...
Click to collapse
If you can boot to recovery, then I wouldn't say it's "bricked."
As for a place like Best Buy helping you, well I don't know their processes but anyone who checks for a warranty claim can't help you in its current state.
Why not just flash a new ROM?
oohrekt said:
I saw this on my bricked GS4 4.3.1(cyanogenmod 10.2) when I powered it on.
Any way to fix this?
It pops up on recovery mode and when I boot it up.
I really just want to get my S4 working again.
Can I just take it into some place like Best Buy or something and they'd help me?
Product Name: SGH-M919
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC BURST MODE enabled
Click to expand...
Click to collapse
If your phone is "bricked" than your phone has the same exact functionality as a brick. If your phone can turn on and tell you which version of android your on, well... a brick cant do that.
Well I can't get into recovery mode. Being the idiot I tried to flash 4.2.2 over not thinking what I have done. Well, even before I couldn't get into recovery mode. I can get into download mode however. Is it possible I can flash official 4.3 or some other 4.3.1 rom over?
If you still having the problem..
oohrekt said:
Well I can't get into recovery mode. Being the idiot I tried to flash 4.2.2 over not thinking what I have done. Well, even before I couldn't get into recovery mode. I can get into download mode however. Is it possible I can flash official 4.3 or some other 4.3.1 rom over?
Click to expand...
Click to collapse
Well friend,
don't panic.. as I know all your loses is that you lost your warranty but not your device..
You can install the stock original rom jelly bean 4.3
If you are interested go to www sammoblie com then (firmwares) then search for your device model (I9500) or (I9505) or (I9505G) or (I9506) then download the firmware for your country and carrier and follow their installing instructions
If you can boot to recovery, then I wouldn't say it's "bricked."
As for a place like Best Buy helping you, well I don't know their processes but anyone who checks for a warranty claim can't help you in its current state.
Why not just flash a new ROM?
DUBU said:
If you can boot to recovery, then I wouldn't say it's "bricked."
As for a place like Best Buy helping you, well I don't know their processes but anyone who checks for a warranty claim can't help you in its current state.
Why not just flash a new ROM?
Click to expand...
Click to collapse
bro cant you read that he cant boot into recovery
---------- Post added at 09:58 AM ---------- Previous post was at 09:54 AM ----------
oohrekt said:
Well I can't get into recovery mode. Being the idiot I tried to flash 4.2.2 over not thinking what I have done. Well, even before I couldn't get into recovery mode. I can get into download mode however. Is it possible I can flash official 4.3 or some other 4.3.1 rom over?
Click to expand...
Click to collapse
did you ever fix it , i got the exact same problem , i got a metropcs s4 and i wanted kit kat insane rom and tried to flash a stock tmobile rom because some people said they did and it was fine,. well not for me. i would like to knowif you ever got it fixed, i tried to flash the stock metropcs 4.2.2 that i was on before this happened and odin still fails.
its fixed now , i had to move the stock tar to the same folder as odin, go figure
Haha mate you havent "bricked" your phone.
If your phone enters the recovery, it would be booting into the download mode too.
Try getting the official firmware of your specific phone model nom and just flash it via odin.
Dont worry.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Haha mate you havent "bricked" your phone.
If your phone enters the recovery, it would be booting into the download mode too.
Try getting the official firmware of your specific phone model nom and just flash it via odin.
Dont worry.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
I get a message about use kies recovery because firmware upgrade had issues when I try to boot into recovery, and I when I boot download mode flashing the stock rom fails every time.
revized said:
I get a message about use kies recovery because firmware upgrade had issues when I try to boot into recovery, and I when I boot download mode flashing the stock rom fails every time.
Click to expand...
Click to collapse
Yeah that is because you upgraded to 4.3 which has KNOX bootloader.
It wont let you flash 4.2.2 anymore. Like a downgrade is not possible once a knix enavled bootloader is flashed.
Download 4.3 or 4.4.2 and flash. It wont fail.
Thanks if i helped.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Yeah that is because you upgraded to 4.3 which has KNOX bootloader.
It wont let you flash 4.2.2 anymore. Like a downgrade is not possible once a knix enavled bootloader is flashed.
Download 4.3 or 4.4.2 and flash. It wont fail.
Thanks if i helped.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Sounds nice and all although I tried to flash the official 4.3 from Samsmobile and it's fails.
4.4 is not available for mrtropcs customers because the company don't care about it's customers in this regard. LOL
Just for inquiry purposes only, I found a link to a Guy saying he used lunix to delete know bootloader from a tar filehttps://www.google.com/url?sa=t&source=web&rct=j&ei=8PDgU7DSOZTdoATTkIKYDA&url=http://m.youtube.com/watch%3Fv%3D75DKAGNstbM&cd=1&ved=0CB4QtwIwAA&usg=AFQjCNE7yajeB0317RtOmlFeEIB1QgEOGA&sig2=oD8TmSaTKu19-kpy0AKFGQ
Just go to sammobile and find the latest firmware for your model (4.4.2 for example) and dont look at build number.
Just grab it and extract to desktop.
Put your device in recovery mode if you can, and wipe data/cache/system if you can.
Then put your phone in download mode and connect do computer, in ODIN choose AP and add your tar.md5 file from desktop.
Flash it.
Then pull out battery on first reboot when flashin. Put it back and get into recovery by pressing VolUp + Power. Wipe everything again and reboot.
Should be fine.
i was finally able to flash stock 4.3 by just moving the tar file into the same folder as odin, go figure , i still want 4.4!!LOL

[Q] won't boot normal or recovery [desperate]

Can someone help with a possible bricked an SGH-i337 4.3 UCUEMK2 build?
Got this on eBay & it "ran" great but this nagging voice kept saying, "it could be better on KitKat."
First let me say I’ve been rooting & flashing ROMs for years but this had me stumped.
After performing a successful "saferoot" I found RomManager couldn’t install ColckworkMod due to a locked bootloader.
I did install "Safestrap" but w/o fully understanding how to use it I may have killed it.
As of now I cannot boot into recovery, normal booting shows the Samsung logo with an unlocked padlock symbol.
Odin connects but with a locked bootloader I’m not sure if that will help since NAND write fails.
In download mode at the triangle screen this is what it reads:
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Knox Kernel Lock: 0x0
Knox Warrantee Void: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC Burst Mode enabled
Any Devs out there that can prevent this from becoming an aquarium chew toy please help.
I’ve been trying to fix it for 2 weeks & about to give-up.
much thanks, Rick
You will be able to flash the full MK2 firmware using odin
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Thanks jmjoyas
jmjoyas said:
You will be able to flash the full MK2 firmware using odin
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I've been looking for the modem/radio MD5 file but no luck so far. Even if I do find it I'm not sure if my locked bootloader will let me flash it.
rfreynolds said:
I've been looking for the modem/radio MD5 file but no luck so far. Even if I do find it I'm not sure if my locked bootloader will let me flash it.
Click to expand...
Click to collapse
Try here http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my SAMSUNG-SGH-I727
MANY THANKS to jmjoyas & jd1639
after following your advice all is back to normal & backed up. now i need to study safestrap & push on to kitkat. thanks again guys.

Secure Magiccode check fail

I was able root my galaxy s4 at&t sgh-I337. Somehow when I was trying install recovery, I screwed up my phone. Now I am struck on yellow triangle. I have tried install rom-I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 via Odin but I am getting following error.
ODIN MODE
PRODUCT NAME SGH-I337
CURRENT BINARY SAMSUNG OFFICIAL
SYSTEM STATUS CUSTOM
KNOX KEANEL LOCK 0X0
KNOX WARRANTY VOID 0X0
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION ENABLE
eMMC BURST MODE ENABLED
START (224,1440)
SECURE MAGIGCCODE CHECK FAIL : RECOVERY
ODIN 3:07 SAYS FAILED.. I cant boot in to android os anymore or recovery. I can still go in to download mode. I do not have a back up of original rom. I had Android version 4.4.4, I337UCUFNJ4.
I want restore my phone to original or custom 4.4.2. please help..
Well this sounds familiar and I'm afraid you may have lost your MDL Bootloader as well. About the same thing happened to me and my only option was to Odin NB1 with the locked bootloader and now I'm Safestrapped for life. The NB1 Tar was the only one I could get to Pass successfully but at least I am still running my S4.
Good luck
Thanks, used odin to stock NB1 , Install safestrap and updated to 4.4.2 golden eye 49.2 rom. Hope to update to Lolipop oneday.
Moved to Q&A
Moved thread to Q&A.

Help rooting and de-bloating Galaxy S4 SPH-720T

I think something is not right about my phone. I got this this phone 3 days ago and was running lollipop 5.0.1.
I tried to root it with this guide here choosing method one, because in the about section of the settings, it said Galaxy s4 GT-i9500. After flashing the downloaded CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 with Odin and it failed, it could only boot into download mode with the error "Firmware upgrade encountered an issue. Please select ..........blah blah blah".
After failing to unbrick the phone, I took it to a repair shop where they flashed a new stock rom. The model now says Galaxy S4 SPH-L720T in lollipop 5.0.1. It used to be GT-I9500 and to make it more confusing, the sticker at the back read Model: SM-i9500, SSN: -i9500GSMH. And if I boot into downooad mode, the below info is what comes up. How can I successfully root this device and de-bloat it without bricking my phone again? I didn't have to spend the extra money for flashing a new rom.
ODIN MODE
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
Easiest way
Odin custom recovery
Reboot into recovery
Flash latest super user and bianary
Sent from my SPH-L720 using Tapatalk
Thank you. I'm rooted now. I was skeptical at first because I had attempted a root that bricked my phone. I need to remove bloatwares and make wifi tethering work.

Categories

Resources