Database Users

Zenfone 2 Laser ZE550KL stuck a boot screen

My new Zenfone 2 Laser, purchased 4 months ago and having stock ROM and recovery is stuck at ASUS logo screen/ boot screen.
The phone is not even booting to recovery mode (power + volume down). Though in fastboot mode (power + volume up) I could erase cache but after rebooting its again the same logo screen.
Has anyone experience the same issue?

I have the same issue, do you have any solution?

preeti-defy said:
My new Zenfone 2 Laser, purchased 4 months ago and having stock ROM and recovery is stuck at ASUS logo screen/ boot screen.
The phone is not even booting to recovery mode (power + volume down). Though in fastboot mode (power + volume up) I could erase cache but after rebooting its again the same logo screen.
Has anyone experience the same issue?
Click to expand...
Click to collapse
Hello yes I had this problem and you have to install a recovery with fastboot cause even if the screen doesn't show fastboot mode i think your device is recognized by fastboot. After you could access recovery. And i restarted my phone by the cmd "fastboot boot boot.img" but when i have to do it always when i power off my phone so i not resolved all the problem

What version do you use? I tried official or unofficial rom, it does not work.
I got bootloop even I tried "fastboot boot boot.img or fastboot flash boot boot.img".

chchtono said:
What version do you use? I tried official or unofficial rom, it does not work.
I got bootloop even I tried "fastboot boot boot.img or fastboot flash boot boot.img".
Click to expand...
Click to collapse
the last version

Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !

I'm currently facing the same problem...and though the phone goes into fastboot, and the PC device manager detects the phone as ADB Android device (even when the phone is simply attached without pressing anything or the power key), cmd ADB doesn't detect the phone, cos USB debug mode is turned off after a wipe and a new installation...even if the installation goes sideways, like this situation....so pls someoone come with a better response.
---------- Post added at 03:11 AM ---------- Previous post was at 03:05 AM ----------
RonakRonak said:
Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !
Click to expand...
Click to collapse
That's what bricked my device! installing stock rom downloaded from Asus...The updated ROM had no effect on the previous challenges I was facing, so I downloaded this ROM instead UL-ASUS_Z00E-WW-12.8.5.222-user to try a downgrade, then I update through OTA once done, and it landed me with this problem... I can't tell if it's the Rom, or I missed something...
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
RonakRonak said:
Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !
Click to expand...
Click to collapse
Can u kindly provide a link to where we can get a clean, working fastboot rom for our devices??? thank u!!!
mine is a Z00ED or Z00L... will be grateful

abodan09 said:
I'm currently facing the same problem...and though the phone goes into fastboot, and the PC device manager detects the phone as ADB Android device (even when the phone is simply attached without pressing anything or the power key), cmd ADB doesn't detect the phone, cos USB debug mode is turned off after a wipe and a new installation...even if the installation goes sideways, like this situation....so pls someoone come with a better response.
---------- Post added at 03:11 AM ---------- Previous post was at 03:05 AM ----------
That's what bricked my device! installing stock rom downloaded from Asus...The updated ROM had no effect on the previous challenges I was facing, so I downloaded this ROM instead UL-ASUS_Z00E-WW-12.8.5.222-user to try a downgrade, then I update through OTA once done, and it landed me with this problem... I can't tell if it's the Rom, or I missed something...
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
Can u kindly provide a link to where we can get a clean, working fastboot rom for our devices??? thank u!!!
mine is a Z00ED or Z00L... will be grateful
Click to expand...
Click to collapse
Hi.
Bro first you have to know what's ur exact device model and go to Asus official support page.select ur device model and download latest firmware (as ur device can boot in to fastmode u have chance to get things working again).(have u checked how to go back to stock on XDA thread.pm the thread moderater their.I think he can Help u more precisely. )

RonakRonak said:
Hi.
Bro first you have to know what's ur exact device model and go to Asus official support page.select ur device model and download latest firmware (as ur device can boot in to fastmode u have chance to get things working again).(have u checked how to go back to stock on XDA thread.pm the thread moderater their.I think he can Help u more precisely. )
Click to expand...
Click to collapse
Well, i guess u missread my previous comment since i made it clear that i downloaded both the latest firmware, and the one that came with my phone from the official site....
secondly, without usb debug mode turned on, i don't see the possibilities of flashing the roms...but also, i've come accross ppl with similar issues in a different thread, which i'm closely following and monitoring....with the hope of a breakthrough.
so, thanx for your time.

abodan09 said:
Well, i guess u missread my previous comment since i made it clear that i downloaded both the latest firmware, and the one that came with my phone from the official site....
secondly, without usb debug mode turned on, i don't see the possibilities of flashing the roms...but also, i've come accross ppl with similar issues in a different thread, which i'm closely following and monitoring....with the hope of a breakthrough.
so, thanx for your time.
Click to expand...
Click to collapse
ohh i m sorry.yes ther are threads regarding same issue.Hope u will got ur device working soon :good:

Help me! My Moto E3 power got Soft Brick

1. I unlock bootloader
2. Try to flash file cutom recovery TWRP (in post 'Root for Moto E3 Power'-TWRP Meizu') without root system --> then it reboot and
turn to screen, now the logo Moto feeze so i guess my device brick @@
3. Afterthat, i still can enter to bootloader
4. I try to flash rom stock XT1706_S131 (share from post 'Root for Moto E3 Power') by TWRP and recovery Stock but still got error @@. Also try SP Flash Tool and got 'Brom Error 6405'.
Anyone here can help me, huhu! I should not try install TWRP without root

Did you clear user data??
---------- Post added at 10:31 AM ---------- Previous post was at 10:26 AM ----------
OK so first go into bootloader mode unlock bootloader then clear user data all inside the bootloader mode then flash the two boot to recovery flash SuperSU and bam !!!!
Trust me this will work

pranaay saini said:
did you clear user data??
---------- post added at 10:31 am ---------- previous post was at 10:26 am ----------
ok so first go into bootloader mode unlock bootloader then clear user data all inside the bootloader mode then flash the two boot to recovery flash supersu and bam !!!!
Trust me this will work
Click to expand...
Click to collapse
yes this worked well after getting soft brick issues with xposed framework and its modules..

pranaay saini said:
Did you clear user data??
---------- Post added at 10:31 AM ---------- Previous post was at 10:26 AM ----------
OK so first go into bootloader mode unlock bootloader then clear user data all inside the bootloader mode then flash the two boot to recovery flash SuperSU and bam !!!!
Trust me this will work
Click to expand...
Click to collapse
two boot to recovery means

omi1234 said:
two boot to recovery means
Click to expand...
Click to collapse
Oh sorry that's auto correct its supposed to be "twrp"

Hello there guys... i have hard bricked my phone n when i try to flash stock taido row rom .... my flashtool show brom error( open Dram failed)... plz help m out if anybody flash the room correctly...

It's all about here
https://forum.xda-developers.com/moto-e3/how-to/guide-root-unbrick-moto-e3-power-xt1706-t3579595

pranaay saini said:
Did you clear user data??
---------- Post added at 10:31 AM ---------- Previous post was at 10:26 AM ----------
OK so first go into bootloader mode unlock bootloader then clear user data all inside the bootloader mode then flash the two boot to recovery flash SuperSU and bam !!!!
Trust me this will work
Click to expand...
Click to collapse
i tried it... but again iam struck at my moto logo... what to do? can someone help me??:crying:

How to root Honor 8 Lite PRA-LA1 Android 7.0

Hi
After successfully unlock bootloader i am not able to root Honor 8 Lite PRA-LA1 Android 7.0 with xposed tools because in recovery mod there is no option for install zip files.
How i can root .?

I wonder the same

I tried "adb reboot bootloader", but when tried "fastboot oem unlock", I got "failed, password wrong".
I unlocked bootloader http://emui.huawei.com/en/plugin/hwdownload/download and Open road to root....

However is not sense, because will deleted all you stock apps (include keyboard), include Google app and Google Play. For this model NOT PRESENT AND probably WILL NO any stock firmware or recovery! Will every boot "Unlocked and not thrusted", and if try flash this recovery (https://twrp.me/devices/huaweihonor8.html), you got soft-brick (will available bootloader).
If you tried, probably you have no any chance....
Type "fastboot oem relock" with gotten early password, but you anyways will have no Google Play and keyboard.... For full worked firmware you anyways have no chances.
And... RIP finally, not possible even to bootloader.

I waiting when battery fully lost of charge.... Probably will chance to enter to bootloader.

I partially restored firmware...

can anybody give me huawei honor pra-la1 firmware its stuck on logo just go fastboot mode but bootloader locked there any sulation??????

sajidalilatif1989 said:
can anybody give me huawei honor pra-la1 firmware its stuck on logo just go fastboot mode but bootloader locked there any sulation??????
Click to expand...
Click to collapse
Please let's talk about this in your thread.

acterhd said:
I partially restored firmware...
Click to expand...
Click to collapse
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.

kfatah22 said:
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.
Click to expand...
Click to collapse
flash the whole firmware via dload method

kfatah22 said:
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.
Click to expand...
Click to collapse
Download whole firmware and force upgrade via dload.

!!!help!!! Mi a1 still in edl only white led blinking and black screen

Few days ago i decide to install GCAM on my mi a1 with magisk and a patched boot...evrything is working fine but when i unistall magisk phone still rebooting many times and wifi doesnt work.
I tried to boot the original boot.img , then i flash oreo stock in many different version but nothing to do.
At this point wrongly i try to click on flash factory. bat file but i dont know if the code is work correct because the command prompt is closing in a bit.
Now i read that this file corrupt and delete the IMEI...
Only solution for me is the edl because in another try i lock bootloader and then i cant unlock, i dont know why, by fastboot command.
Then i open my phone e try edl method....my device is recognized but after few attemps to flash many stock rom from the first to the last nothing change...
my device still black with blinking led, evry buttons do not respond.
WHAT CAN I DO??? I NEED YOUR HELP

Just download latest firmware or any old and flash it in fastboot
---------- Post added at 06:09 PM ---------- Previous post was at 06:09 PM ----------
Booting in fastboot?
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
kevinperdichizzi said:
Few days ago i decide to install GCAM on my mi a1 with magisk and a patched boot...evrything is working fine but when i unistall magisk phone still rebooting many times and wifi doesnt work.
I tried to boot the original boot.img , then i flash oreo stock in many different version but nothing to do.
At this point wrongly i try to click on flash factory. bat file but i dont know if the code is work correct because the command prompt is closing in a bit.
Now i read that this file corrupt and delete the IMEI...
Only solution for me is the edl because in another try i lock bootloader and then i cant unlock, i dont know why, by fastboot command.
Then i open my phone e try edl method....my device is recognized but after few attemps to flash many stock rom from the first to the last nothing change...
my device still black with blinking led, evry buttons do not respond.
WHAT CAN I DO??? I NEED YOUR HELP
Click to expand...
Click to collapse
First download oreo firmware and boot into fastboot mode
The open cmd and hit
Fastboot oem unlock
Then open xiaomiflash software and flash it.
Note: don't lock your bootloader again when you have Installed any custom thing

hamzaag49 said:
Just download latest firmware or any old and flash it in fastboot
---------- Post added at 06:09 PM ---------- Previous post was at 06:09 PM ----------
Booting in fastboot?
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
First download oreo firmware and boot into fastboot mode
The open cmd and hit
Fastboot oem unlock
Then open xiaomiflash software and flash it.
Note: don't lock your bootloader again when you have Installed any custom thing
Click to expand...
Click to collapse
I previously tried flash in fastbooot with evry stock release from nutgat to oreo and doesnt work. this before i go in edl.
now in edl is the same , flash is succesful but nothings happen screen still black led blinking and i cant go fastboot

kevinperdichizzi said:
I previously tried flash in fastbooot with evry stock release from nutgat to oreo and doesnt work. this before i go in edl.
now in edl is the same , flash is succesful but nothings happen screen still black led blinking and i cant go fastboot
Click to expand...
Click to collapse
I have exactly the same problem tried everything but still no solution. Bad thing is that there is no service center in my country.

daveve said:
I have exactly the same problem tried everything but still no solution. Bad thing is that there is no service center in my country.
Click to expand...
Click to collapse
Me too. i'm freaking out because i think that the only solutions is change the mainboard, and no xioami centre for doing that but only an autorized .

mod please remove

mod please remove this thread

oh hell, i've followed every step exactly and got a bootloop. 1922-5 brazilian model. is it because of the last update?
---------- Post added at 07:20 PM ---------- Previous post was at 07:18 PM ----------
and why does my phone show as a moto e4 now????
---------- Post added at 07:26 PM ---------- Previous post was at 07:20 PM ----------
just a thing: i obviously got some backups and i could revert the bootloop by just flashing the stock boot back into the phone.

if you took the update you have to reflash the updated stock firmware after the update. if need be ill walk you through it ive already done it with one person over facebook messenger and after that they were successful. unfortunately they havent commented on saying so lol or thanked the post. sorry for the late reply also i just got off work lol also if links are dead i got dev access on afh now so ill be putting the new links on here ina bit . also tbh i have no clue why it says moto e4 when we put the twrp recovery on but it doesnt affect anything. it would be nice if we had an official twrp
blowingoff said:
oh hell, i've followed every step exactly and got a bootloop. 1922-5 brazilian model. is it because of the last update?
---------- Post added at 07:20 PM ---------- Previous post was at 07:18 PM ----------
and why does my phone show as a moto e4 now????
---------- Post added at 07:26 PM ---------- Previous post was at 07:20 PM ----------
just a thing: i obviously got some backups and i could revert the bootloop by just flashing the stock boot back into the phone.
Click to expand...
Click to collapse

Moto G6 Play XT1922-3
ninjakira said:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, fires, rigged elections, ligma,
* thermonuclear war, or your mom getting upset with you for being on the computer all day
Please
* Ensure you have an advanced understanding of this device before flashing it! YOU are choosing to make these modifications or your own free will.
*/
I've decided to make a new guide for our jeter devices because the other guide is a little sloppy now lol. I have no problem with having this taking down if the op for the original guide decides to clean theirs up. this one should help clear up stuff now at least lol
This has been confirmed to work on:
XT1922-3 Model
XT1922-4 Model
XT1922-5 Brazilian Model
XT1922-7 Boost Mobile
XT1922-9 Model
Please make backups using TWRP IN CASE OF FAILURE.
Original stock firmware can be found here. https://mirrors.lolinet.com/firmware/moto/jeter/official/
The steps listed in this process WILL wipe your userdata. If you have anything you need to save back it up first.
Prerequisites:
Unlocked bootloader.
ADB/Fastboot installed on your machine ( https://developer.android.com/studio...platform-tools ) If you have issues with commands make sure you have a current build of ADB and fastboot.
Minimal adb/fastboot v1.4.3 installer can be found here. https://androidfilehost.com/?fid=746010030569952951
Step 1.) Download twrp image to the ADB/Fastboot folder on your computer. https://www.androidfilehost.com/?fid=1322778262904017969
Step 2.) Reboot to your bootloader. You can do this by turning on your device and holding power and both volume buttons at the same time.
Step 3.) Once the device reboots to the bootloader type the following from your computer with your phone connected via USB.
Code:
fastboot boot moto-g6-play-jeter-patched-twrp.img
Step 4.) Once TWRP boots from your computer type (it may take a bit to boot because it is trying to decrypt your userdata, but it will fail and prompt for a password. Just click cancel):
Code:
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/boot stockboot.img
adb pull /dev/block/platform/soc/7824900.sdhci/by-name/recovery stockrecovery.img
This will backup your stock boot and recovery images if you to revert to stock later.
Step 5.) Code:
adb reboot bootloader
Step 6.) Run the following command from your computer to install the TWRP image to your device.
Code:
fastboot flash recovery moto-g6-play-jeter-patched-twrp.img
Step 7.) Use the volume keys on the device to select boot to recovery and TWRP will boot up again. When it prompts for a decryption password select cancel again.
Step 8.) From your computer type the following into your command prompt/terminal from your adb/fastboot folder:
Code:
adb shell mount -o,rw /dev/block/platform/soc/7824900.sdhci/by-name/vendor /vendor
Step 9.) Download and extract https://www.androidfilehost.com/?fid=1322778262904017972 this patched fstab.qcom boot image into the ADB/Fastboot folder on your PC.
Step 10.) Run the following command from command prompt/terminal on your computer:
Code:
adb push fstab.qcom /vendor/etc/fstab.qcom
Step 11.) Next click the "Wipe" button in TWRP and slide "Swipe to Factory Reset" THIS WILL WIPE YOUR DATA ON YOUR PHONE. Ensure you have backup.
Step 12.) Download the Magisk Beta 17.2 zip file from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 to your ADB/Fastboot folder.
Step 13.) Run the following command to push the boot image to your device
Code:
adb push Magisk-v17.2.zip /tmp
This will push the Magisk-v17.2.zip to your /tmp folder
Step 14.) Flash Magisk-v17.2.zip from TWRP using the install option and navigate to the /tmp folder to select it and install it.
Step 15.) Reboot your device
Step 16.) It will say N/A in the top corner of your device for a few seconds. Then it will boot the the Motorola boot screen and you can setup your device as a new phone.
Step 17.) Verify Magisk Manager is installed and the root functionality works. if force encrytion is checked just uncheck it, click install then whatever option magisk recommends then reboot.
step 18.) have fun.
Step 19.)DOWNLOAD STOCK FIRMWARE HERE https://mirrors.lolinet.com/firmware/moto/jeter/official/ UNZIP STOCK FIRMWARE TO YOUR ADB/FASTBOOT FOLDER TO FLASH IT. TO REVERT BACK TO STOCK YOU HAVE TO REFLASH STOCK FIRMWARE FROM THE BOOTLOADER if your device is bootlooped or bricked or not working right you have to reflash the stock firmware your device came with. PLEASE INPUT THESE COMMANDS ONE AT A TIME DO NOT DO THEM ALL AT ONCE. I KNOW ITS A HASSLE BUT IT GUARANTEES A SUCCESSFUL REFLASH. I CANNOT EMPHASIZE THIS ENOUGH
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot oem fb_mode_clear
fastboot reboot
if you guys think anything should be edited from this let me know and ill fix it. like im not 100% sure if we still have to use the modified fstabs.qcom i just used it still after i took the update and re-rooted. so if someone can tell me they didnt use the fstabs.qcom and still got the same results please let me know
Credits: @kwiksi1ver for making the original guide. and @topjohnwu for magisk. and @shimp208 for minimal adb/fastboot.
Click to expand...
Click to collapse
It still doesn`t work,i flashed the stock JETER_RETAIL_8.0.0_OPPS27.91-35-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml,code by code with fastboot and gpt.bin,bootloader.img and oem.img fail flashing.
What should i do?
Every time i boot the phone normally or into bootloader it says bad key,and i also dont see my baseband anymore.
Help me!

ninjakira said:
if you took the update you have to reflash the updated stock firmware after the update. if need be ill walk you through it ive already done it with one person over facebook messenger and after that they were successful. unfortunately they havent commented on saying so lol or thanked the post. sorry for the late reply also i just got off work lol also if links are dead i got dev access on afh now so ill be putting the new links on here ina bit . also tbh i have no clue why it says moto e4 when we put the twrp recovery on but it doesnt affect anything. it would be nice if we had an official twrp
Click to expand...
Click to collapse
I could imagine it was because we have no official twrp. what do you mean by updated stock image? I'm oj build opp27.91-87.

You sir need to also use this https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETAIL/. Go to step 19 and follow the reflashing stock firmware instructions. Use the most recent firmware. You can tell which one is new by dates
blowingoff said:
I could imagine it was because we have no official twrp. what do you mean by updated stock image? I'm oj build opp27.91-87.
Click to expand...
Click to collapse

ninjakira said:
You sir need to also use this https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETAIL/. Go to step 19 and follow the reflashing stock firmware instructions. Use the most recent firmware. You can tell which one is new by dates
Click to expand...
Click to collapse
mine is the brazilian one, xt1922-5. the downloads are for the 1922-2. can i use it?
---------- Post added at 05:49 PM ---------- Previous post was at 05:45 PM ----------
oh, I think you didn't understand me. I've already reverted the bootloop, my phone is working. but if I flash magisk, it goes to bootloop

I just got off the phone with Moto they confirm your device is also the aljeter so those firmwares should work for you.
blowingoff said:
mine is the brazilian one, xt1922-5. the downloads are for the 1922-2. can i use it?
---------- Post added at 05:49 PM ---------- Previous post was at 05:45 PM ----------
oh, I think you didn't understand me. I've already reverted the bootloop, my phone is working. but if I flash magisk, it goes to bootloop
Click to expand...
Click to collapse

ninjakira said:
I just got off the phone with Moto they confirm your device is also the aljeter so those firmwares should work for you.
Click to expand...
Click to collapse
great. so i'll flash the firmware and try to root from it
---------- Post added at 06:40 PM ---------- Previous post was at 06:25 PM ----------
well. i got an update. I just flash magisk with no modified boot image, no fstab.qcom and such. just flash twrp and then magisk.
phone rooted, safetynet passed. wow!!!!!!!!!!

blowingoff said:
great. so i'll flash the firmware and try to root from it
---------- Post added at 06:40 PM ---------- Previous post was at 06:25 PM ----------
well. i got an update. I just flash magisk with no modified boot image, no fstab.qcom and such. just flash twrp and then magisk.
phone rooted, safetynet passed. wow!!!!!!!!!!
Click to expand...
Click to collapse
Awesome you just helped confirm a couple things on my end to lol like the fstabs.qcom. I'm glad I could be of assistance to you and I'm glad the guide worked. I'll be removing the fstabs.qcom link since they are no longer needed now

I'm pretty sure there's already a Jeter root guide. What's the point in creating a new one?

Dadud said:
I'm pretty sure there's already a Jeter root guide. What's the point in creating a new one?
Click to expand...
Click to collapse
The other one was confusing people, and starting to cause more harm than anything. I've already helped a couple people in bootloop that tried to use the old guide and couldn't.

ninjakira said:
The other one was confusing people, and starting to cause more harm than anything. I've already helped a couple people in bootloop that tried to use the old guide and couldn't.
Click to expand...
Click to collapse
Seems like those people weren't following the the guide TO A T (very important) /skimming thinking it works the old way. I've seen those types of people all over these forums. You're adding more unnecessary clutter to these already cluttered and poorly moderated forums. I'm also pretty sure you don't have permission from kwiksilver to use his files

I've already talked to a mod about this there looking Into it and trust me man I literally have gone on rants to the people about not skimming before I helped fox there devices. I'm just trying to help everyone the best way I can think of all at once. People before the OTA and after no longer need a patched boot.img because the latest magisk does it. Furthermore we don't need the patched fstabs.qcom as I've recently learned. The device can be unencrypted without all that now thanks to magisk. I've already also told quiksi1ver I'm willing to have mine taking down if he cleans his up and updates it.also a couple devices like the xt1922-3 and 5 are aljeter not Jeter but it seems the xt1922-5 still apply to this guide.
Dadud said:
Seems like those people weren't following the the guide TO A T (very important) /skimming thinking it works the old way. I've seen those types of people all over these forums. You're adding more unnecessary clutter to these already cluttered and poorly moderated forums.
Click to expand...
Click to collapse

Also in my post I put the link for the stock firmware along with the proper adb commands to flash said stock firmware from bootloader which ALOT of people also need

lol this thread is much clearer than the earliest. and also: i've followed the steps from the original thread but i got no response from anyone there. hehhe

blowingoff said:
lol this thread is much clearer than the earliest. and also: i've followed the steps from the original thread but i got no response from anyone there. hehhe
Click to expand...
Click to collapse
Thank you for that lol I just wanna actually try to help out our fellow g6 play users lol

Thanks for creating this new thread, it really is cleaner than before.
Got it working on XT1922-5, brazilian model. Managed to get root and everything is working fine.
But just for curiosity, is there a way to revert it to stock with locked bootloader at all? Already flashed stock rom, my only problem is not being able to relock it.
Hope to see some new roms coming for our device soon!

AcTSkull said:
Thanks for creating this new thread, it really is cleaner than before.
Got it working on XT1922-5, brazilian model. Managed to get root and everything is working fine.
But just for curiosity, is there a way to revert it to stock with locked bootloader at all? Already flashed stock rom, my only problem is not being able to relock it.
Hope to see some new roms coming for our device soon!
Click to expand...
Click to collapse
Removed commands for bootloader relock because they don't work ignore this post

ninjakira said:
I personally have not used this yet to relock my bootloader so I cannot say 100% this will work. So please don't get mad at me if not. If it works for you please let me know and I'll add it to the post
Click to expand...
Click to collapse
Of course not! We are all here to learn, share and have fun with it.
Anyway, it didn't work. Still boots up with the Bad Key at the top and grayed out "unlocked oem" at developer options.
Let's wait and see if (when available around here, not OTA) flashing a new firmware will fix it, perhaps, as it updates the version to 27.91-147 (will confirm it later).