My new Zenfone 2 Laser, purchased 4 months ago and having stock ROM and recovery is stuck at ASUS logo screen/ boot screen.
The phone is not even booting to recovery mode (power + volume down). Though in fastboot mode (power + volume up) I could erase cache but after rebooting its again the same logo screen.
Has anyone experience the same issue?
I have the same issue, do you have any solution?
preeti-defy said:
My new Zenfone 2 Laser, purchased 4 months ago and having stock ROM and recovery is stuck at ASUS logo screen/ boot screen.
The phone is not even booting to recovery mode (power + volume down). Though in fastboot mode (power + volume up) I could erase cache but after rebooting its again the same logo screen.
Has anyone experience the same issue?
Click to expand...
Click to collapse
Hello yes I had this problem and you have to install a recovery with fastboot cause even if the screen doesn't show fastboot mode i think your device is recognized by fastboot. After you could access recovery. And i restarted my phone by the cmd "fastboot boot boot.img" but when i have to do it always when i power off my phone so i not resolved all the problem
What version do you use? I tried official or unofficial rom, it does not work.
I got bootloop even I tried "fastboot boot boot.img or fastboot flash boot boot.img".
chchtono said:
What version do you use? I tried official or unofficial rom, it does not work.
I got bootloop even I tried "fastboot boot boot.img or fastboot flash boot boot.img".
Click to expand...
Click to collapse
the last version
Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !
I'm currently facing the same problem...and though the phone goes into fastboot, and the PC device manager detects the phone as ADB Android device (even when the phone is simply attached without pressing anything or the power key), cmd ADB doesn't detect the phone, cos USB debug mode is turned off after a wipe and a new installation...even if the installation goes sideways, like this situation....so pls someoone come with a better response.
---------- Post added at 03:11 AM ---------- Previous post was at 03:05 AM ----------
RonakRonak said:
Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !
Click to expand...
Click to collapse
That's what bricked my device! installing stock rom downloaded from Asus...The updated ROM had no effect on the previous challenges I was facing, so I downloaded this ROM instead UL-ASUS_Z00E-WW-12.8.5.222-user to try a downgrade, then I update through OTA once done, and it landed me with this problem... I can't tell if it's the Rom, or I missed something...
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
RonakRonak said:
Flash stock ROM via Side load ADB in fastboot mode.Search google or XDA u will get info how to flash stock ROM in fastboot mode.
U need to download full ROM ( or fastboot ROM) of ur device !
Click to expand...
Click to collapse
Can u kindly provide a link to where we can get a clean, working fastboot rom for our devices??? thank u!!!
mine is a Z00ED or Z00L... will be grateful
abodan09 said:
I'm currently facing the same problem...and though the phone goes into fastboot, and the PC device manager detects the phone as ADB Android device (even when the phone is simply attached without pressing anything or the power key), cmd ADB doesn't detect the phone, cos USB debug mode is turned off after a wipe and a new installation...even if the installation goes sideways, like this situation....so pls someoone come with a better response.
---------- Post added at 03:11 AM ---------- Previous post was at 03:05 AM ----------
That's what bricked my device! installing stock rom downloaded from Asus...The updated ROM had no effect on the previous challenges I was facing, so I downloaded this ROM instead UL-ASUS_Z00E-WW-12.8.5.222-user to try a downgrade, then I update through OTA once done, and it landed me with this problem... I can't tell if it's the Rom, or I missed something...
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
Can u kindly provide a link to where we can get a clean, working fastboot rom for our devices??? thank u!!!
mine is a Z00ED or Z00L... will be grateful
Click to expand...
Click to collapse
Hi.
Bro first you have to know what's ur exact device model and go to Asus official support page.select ur device model and download latest firmware (as ur device can boot in to fastmode u have chance to get things working again).(have u checked how to go back to stock on XDA thread.pm the thread moderater their.I think he can Help u more precisely. )
RonakRonak said:
Hi.
Bro first you have to know what's ur exact device model and go to Asus official support page.select ur device model and download latest firmware (as ur device can boot in to fastmode u have chance to get things working again).(have u checked how to go back to stock on XDA thread.pm the thread moderater their.I think he can Help u more precisely. )
Click to expand...
Click to collapse
Well, i guess u missread my previous comment since i made it clear that i downloaded both the latest firmware, and the one that came with my phone from the official site....
secondly, without usb debug mode turned on, i don't see the possibilities of flashing the roms...but also, i've come accross ppl with similar issues in a different thread, which i'm closely following and monitoring....with the hope of a breakthrough.
so, thanx for your time.
abodan09 said:
Well, i guess u missread my previous comment since i made it clear that i downloaded both the latest firmware, and the one that came with my phone from the official site....
secondly, without usb debug mode turned on, i don't see the possibilities of flashing the roms...but also, i've come accross ppl with similar issues in a different thread, which i'm closely following and monitoring....with the hope of a breakthrough.
so, thanx for your time.
Click to expand...
Click to collapse
ohh i m sorry.yes ther are threads regarding same issue.Hope u will got ur device working soon :good:
Related
If you have installed OxygenOS 3.0 and when you try to boot recovery mode, or other case, your phone stuck on boot, here's the solution. It's easy, you only have to enter this link: http://forum.xda-developers.com/devdb/project/dl/?id=16684 and download the content. After unzip, connect your phone in fastboot mode (on/off button + volume up button) and execute the script that is in the folder unziped (firstaid.bat in windows or fistaid.sh in linux). Now it's possible that system don't boot, but now you have TWRP recovery and you can install the ROM that you want. If you don't want that your phone becomes to stuck on boot, please, read the instructions in this link: https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108 before install again OxygenOS 3.0.
Summary:
Before all this you have to install the adb/fastboot and your phone drivers.
1- Download the firstaid tool from http://forum.xda-developers.com/devdb/project/dl/?id=16684
2- Put the phone in fastboot mode (on/off button + volume up button) and connect to pc
3- Execute the script (firstaid.bat in windows or fistaid.sh in linux)
Now you have recovery again.
4- If you want to install OxygenOS 3.0, follow the instructions of https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108
I've been a lot of hours searching a solution for the problem and it's very annoying. It's a pleasure to help you for don't lose your time like me.
luisito68 said:
If you have installed OxygenOS 3.0 and when you try to boot recovery mode, or other case, your phone stuck on boot, here's the solution. It's easy, you only have to enter this link: http://forum.xda-developers.com/devdb/project/dl/?id=16684 and download the content. After unzip, connect your phone in fastboot mode (on/off button + volume up button) and execute the script that is in the folder unziped (firstaid.bat in windows or fistaid.sh in linux). Now it's possible that system don't boot, but now you have TWRP recovery and you can install the ROM that you want. If you don't want that your phone becomes to stuck on boot, please, read the instructions in this link: https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108 before install again OxygenOS 3.0.
Summary:
Before all this you have to install the adb/fastboot and your phone drivers.
1- Download the firstaid tool from http://forum.xda-developers.com/devdb/project/dl/?id=16684
2- Put the phone in fastboot mode (on/off button + volume up button) and connect to pc
3- Execute the script (firstaid.bat in windows or fistaid.sh in linux)
Now you have recovery again.
4- If you want to install OxygenOS 3.0, follow the instructions of https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108
Click to expand...
Click to collapse
thank you for the post but unfortunately it didn't work in my opt
ronyjarod said:
thank you for the post but unfortunately it didn't work in my opt
Click to expand...
Click to collapse
Sorry, if you have the problem yet you can try to connect your phone in fastboot mode (having all drivers ok) and write "fastboot devices", if your device appears download the twrp modified of the link of the instructions to install OOS 3 (https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108), open cmd in the download folder (shift + right mouse -> open cmd here) and write "fastboot flash recoery recovery.img". This did not work for me, but I tried it with an toher recovery. I wish you solve the problem soon!
luisito68 said:
Sorry, if you have the problem yet you can try to connect your phone in fastboot mode (having all drivers ok) and write "fastboot devices", if your device appears download the twrp modified of the link of the instructions to install OOS 3 (https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108), open cmd in the download folder (shift + right mouse -> open cmd here) and write "fastboot flash recoery recovery.img". This did not work for me, but I tried it with an toher recovery. I wish you solve the problem soon!
Click to expand...
Click to collapse
solved accidentally. what i did was typed fastboot boot OP2_recovery .img (not in the fastboot mode but at the stuck boot logo mode). i don't know how the img went in but that was the way saved my opt from bricked. anyhow, thank you for the reply
i just wanna downgrade pissed off of oos3.0
i wanna flash cm13 or oos 2.2.1 plz help
ronyjarod said:
solved accidentally. what i did was typed fastboot boot OP2_recovery .img (not in the fastboot mode but at the stuck boot logo mode). i don't know how the img went in but that was the way saved my opt from bricked. anyhow, thank you for the reply
Click to expand...
Click to collapse
Oh cool ! It is rare to have recovered at this way , but I'm glad to know it!
Veer1080 said:
i just wanna downgrade pissed off of oos3.0
i wanna flash cm13 or oos 2.2.1 plz help
Click to expand...
Click to collapse
If you follow the three first steps you will have recovery and you will can flash any rom. If this way not work (it worked for me) you can try the way of ronyjarod.
luisito68 said:
If you follow the three first steps you will have recovery and you will can flash any rom. If this way not work (it worked for me) you can try the way of ronyjarod.
Click to expand...
Click to collapse
lol. my way is inappropriate. i was just lucky
---------- Post added at 05:59 AM ---------- Previous post was at 05:53 AM ----------
Veer1080 said:
i just wanna downgrade pissed off of oos3.0
i wanna flash cm13 or oos 2.2.1 plz help
Click to expand...
Click to collapse
my oos 3 seems to be much better than v2.2.1
ronyjarod said:
lol. my way is inappropriate. i was just lucky
---------- Post added at 05:59 AM ---------- Previous post was at 05:53 AM ----------
my oos 3 seems to be much better than v2.2.1
Click to expand...
Click to collapse
3 is laggy after 4 days
Veer1080 said:
3 is laggy after 4 days
Click to expand...
Click to collapse
mine didn't lag after many days
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Sahaj4 said:
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Click to expand...
Click to collapse
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Jyoti_re said:
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Click to expand...
Click to collapse
Heyy.. Thanks a lot Jyoti_re! It worked out perfectly..
I have done till step 3.. The phone booted into 3.0.2
The sensors are not working. I will flash the presist.img as you said in step 4
However, i have encountered a problem. My OP2 is a 64 GB version. But now the internal storage shows 7gb free out of 9.66 GB.. Earlier it used to show 54GB instead of 9.66..
What should i do?
Thanks again
Yes u must have to flash persist.img via firstboot mode by typing [ fastboot flash persist ] for sensor correctly working.
Install es file explorar from play store and check which folder taking More space
don't forget to press thanks if I helped u.
Thanks a lot Jyoti! /
Yeah i got it.. Flashed the persist img.
i searched through the forums.. somehow my device got the 16gb version img.. i dont know how..
i had to flash userdata64G.img as well
Now it all works perfectly.. sensors are working.. data storage is back at 54gb..
Thanks a lot! I had been stuck on this bootloop since 3 days..
and i pressed the thanks button.. i will press it 100 times over if possible Thanks again! Cheers!
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Sahaj4 said:
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Click to expand...
Click to collapse
Flash this SuperSU
https://drive.google.com/file/d/0B0OiN2evbEPuZk1KSk1hYUpEazA/view?usp=drivesdk
don't forget to press thanks if I helped u.
OP2 stuck in bootloop on upgrading from 2.0.2 to 3.0.2
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
ciroportugues said:
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
Click to expand...
Click to collapse
Have u enabled OEM unlocking in developer option ??
No i forgot to enable...
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
Jyoti_re said:
Have u enabled OEM unlocking in developer option ??
Click to expand...
Click to collapse
No iforgot to enable...
What can i do now?
ciroportugues said:
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
No iforgot to enable...
What can i do now?
Click to expand...
Click to collapse
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Jyoti_re said:
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
ciroportugues said:
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
Click to expand...
Click to collapse
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
ciroportugues said:
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
Click to expand...
Click to collapse
What does the Device Manager show when you connect your phone? By what name is it identified?
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
---------- Post added at 10:06 PM ---------- Previous post was at 09:37 PM ----------
Sahaj4 said:
What does the Device Manager show when you connect your phone? By what name is it identified?
Click to expand...
Click to collapse
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Sahaj4 said:
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Click to expand...
Click to collapse
Tried this commands but the sistem reboots and stucka on powered by android
ciroportugues said:
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Tried this commands but the sistem reboots and stucks on powered by android
Click to expand...
Click to collapse
Hi. want to know if you anymore command to help me? thanks for help
ciroportugues said:
Hi. want to know if you anymore command to help me? thanks for help
Click to expand...
Click to collapse
I don't know much.. only as much as i have tried..
try running the command
fastboot oem device-info
if your device is unlocked, you are lucky! then there are many options
but if your device is locked.. then as far as i know, msm tool is your only saviour
try using this guide to unbrick your phone
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Hello,
I tried to root my Zenfone 2 ZE500KL but i didn't see that the method don't work with Android 6. Now, when I start my phone i have the message "ERROR: Can't load invalid boot image" with the ASUS Logo.
I tried a lot of things using ADB, like go to the recovery mode for format, installing from the ROM again from my SD. But the message stay...
I need your help now, car I don't find anything... Thanks !
CzeroXCI said:
Hello,
I tried to root my Zenfone 2 ZE500KL but i didn't see that the method don't work with Android 6. Now, when I start my phone i have the message "ERROR: Can't load invalid boot image" with the ASUS Logo.
I tried a lot of things using ADB, like go to the recovery mode for format, installing from the ROM again from my SD. But the message stay...
I need your help now, car I don't find anything... Thanks !
Click to expand...
Click to collapse
Download this boot.img for Marshmallow v.13.10.7.1
https://drive.google.com/file/d/0B7F3ZXr565GkV2N3WjBoeEZXUUU/view?usp=drivesdk
The command from fasboot mode:
fastboot flash boot boot.img
Muminek111 said:
Download this boot.img for Marshmallow v.13.10.7.1
https://drive.google.com/file/d/0B7F3ZXr565GkV2N3WjBoeEZXUUU/view?usp=drivesdk
The command from fasboot mode:
fastboot flash boot boot.img
Click to expand...
Click to collapse
My phone version is 13.10.10.34 can I flash this boot image????
Sharashchandra said:
My phone version is 13.10.10.34 can I flash this boot image????
Click to expand...
Click to collapse
You need to boot.img from stock rom v 13.10.10.34.
Stock rom you can download from Asus website and then extract boot.img from this stock rom.
Sharashchandra said:
My phone version is 13.10.10.34 can I flash this boot image????
Click to expand...
Click to collapse
Plz help I used twrp v2.8.7.7seven max then
Its booted and showing in modified partition.ileave it as it is and I just backup the system but after backup when I press reboot system it will just freezed .then manually I switched on its showing "ERROR: Can't load invali boot image" two phones are under same condition plz help me its my friends phone.
Help me as fast as possible
---------- Post added at 01:13 PM ---------- Previous post was at 01:11 PM ----------
Muminek111 said:
You need to boot.img from stock rom v 13.10.10.34.
Stock rom you can download from Asus website and then extract boot.img from this stock rom.
Click to expand...
Click to collapse
Plz help I used twrp v2.8.7.7seven max then
Its booted and showing in modified partition.ileave it as it is and I just backup the system but after backup when I press reboot system it will just freezed .then manually I switched on its showing "ERROR: Can't load invali boot image" two phones are under same condition plz help me its my friends phone.
Help me as fast as possible
Sharashchandra said:
Plz help I used twrp v2.8.7.7seven max then
Its booted and showing in modified partition.ileave it as it is and I just backup the system but after backup when I press reboot system it will just freezed .then manually I switched on its showing "ERROR: Can't load invali boot image" two phones are under same condition plz help me its my friends phone.
Help me as fast as possible
---------- Post added at 01:13 PM ---------- Previous post was at 01:11 PM ----------
Plz help I used twrp v2.8.7.7seven max then
Its booted and showing in modified partition.ileave it as it is and I just backup the system but after backup when I press reboot system it will just freezed .then manually I switched on its showing "ERROR: Can't load invali boot image" two phones are under same condition plz help me its my friends phone.
Help me as fast as possible
Click to expand...
Click to collapse
I don't understand what your problem.
For Marshmallow use this TWRP.
https://drive.google.com/file/d/0B7F3ZXr565GkY28yUjhfRkd5MUk/view?usp=drivesdk
Another possibility how to fix your phone is flash stock rom from stock recovery. It's the easiest way.
Muminek111 said:
I don't understand what your problem.
For Marshmallow use this TWRP.
https://drive.google.com/file/d/0B7F3ZXr565GkY28yUjhfRkd5MUk/view?usp=drivesdk
Another possibility how to fix your phone is flash stock rom from stock recovery. It's the easiest way.
Click to expand...
Click to collapse
After flashing also the same problem persists
Thankyou
Sharashchandra said:
After flashing also the same problem persists
Thankyou
Click to expand...
Click to collapse
Do you tried to flash Asus stock rom v.13.10.10.34(1.4gb) from Asus stock recovery v.13.10.10 34. I don't mean flash from TWRP.
Hello M having ASUS ZenFone 2 laser ze550kl model with marshmallow version.. I tried to unlock boot loader but m unable to do so.. Please help me..
just flash this zip https://yadi.sk/d/0NFnYyTG36XzWv using TWRP recovery(in menu "install").
just flash this..
it works perfectly fine
make sure you use the latest TWRP for your device.
Hey bro you can watch this video and follow the steps then your phone will definitely right back.....
https://youtu.be/_Ca10N-XQJk
I have also this problem .
But i can't enter in the recovery menu , it doesn't work.
P.S. sorry for my english
Muminek111 said:
Do you tried to flash Asus stock rom v.13.10.10.34(1.4gb) from Asus stock recovery v.13.10.10 34. I don't mean flash from TWRP.
Click to expand...
Click to collapse
Well, i can feel some doubt in your post...but h*ll yeah! I'm currently facing the same problem; where flashing stock rom, downloaded from their site, using their stock recovery, adb, and adb sideload....
the rom flashes successfully, but still boots with the same error...To be frank, i'm fed up...and almost about giving up on this phone...
-i believe i'll give it another shot this very night, trying different methods...funny ones though; if and when they work, i will definitely update my post again... my phone version is Z00ED, in case anybody cares to know -
UPDATE:
=======
Aaaaaanyway, I downloaded 2 kinds of stock roms from the Asus official site;
1. UL-ASUS_Z00E-WW-13.1010.1612.53-user (the latest:- M) and...
2. UL-ASUS_Z00E-WW-12.8.5.222-user (and older version:- actually, the pre-installed version)
after flashing the first one over and over again; after and before wiping my phone and cache over and over again, NOTHING HAPPENED; no change!!! still kept throwing back the error message.
So I decided to flash the second one, and for a split second, I was happy cos the error had disappear...only for me to wait for eternity and in vain for the phone to boot (that is, even if it could). suddenly, I realized what had happen....the phone couldn't boot pass the ASUS logo, neither could it load recovery again (as it used to). It only boots into ADB, but of course, that will require USB DEBUG MODE to be ON to be able for the phone to be detected through ADB (which is far from possible due to the numerous wipes I performed).
CURRENT SITUATION: I can't ADB, I can't get into recovery, and I'm stacked with the logo at boot......when the phone is completely turned off and placed on charge, the battery shows an empty battery with the loading (status) sign (but it charges, even without the OS being able to display the process).
Don't know whether anyone is facing same, or I can start a new thread with this? and I need help before taking it to a 3rd party repairs (since we don't hv Asus customer care in our country yet).
Will be glad to find help.
PS: The computer still detects the phone as an ADB Android device, and to me, that's a beacon of hope.
abodan09 said:
Well, i can feel some doubt in your post...but h*ll yeah! I'm currently facing the same problem; where flashing stock rom, downloaded from their site, using their stock recovery, adb, and adb sideload....
the rom flashes successfully, but still boots with the same error...To be frank, i'm fed up...and almost about giving up on this phone...
-i believe i'll give it another shot this very night, trying different methods...funny ones though; if and when they work, i will definitely update my post again... my phone version is Z00ED, in case anybody cares to know -
Click to expand...
Click to collapse
This problem will resolve to open the bootloader.
Muminek111 said:
This problem will resolve to open the bootloader.
Click to expand...
Click to collapse
I don't think I got that...do u mind explaining further??? thank you!
abodan09 said:
I don't think I got that...do u mind explaining further??? thank you!
Click to expand...
Click to collapse
You can not flash the older version stock rom from stock recovery.
Flash latest stock rom.
Download this twrp: https://drive.google.com/file/d/0B7F3ZXr565GkY28yUjhfRkd5MUk/view?usp=drivesdk
Download this ulock bootloader: https://drive.google.com/file/d/0B7F3ZXr565GkMWNwUkZJa1BUVUU/view?usp=drivesdk
Download this supersu: https://drive.google.com/file/d/0B7F3ZXr565GkOTcxb2VPbmQzT2M/view?usp=drivesdk
Restart to fasboot mode.
Command: fastboot boot twrp.img
From twrp flash first zip ulock bootloder then flash zip supersu.
Reboot.
---------- Post added at 08:39 PM ---------- Previous post was at 08:15 PM ----------
Android 6
Must be first opened bootloader then can modified boot image.
Same ERROR,you just need to flash the unlock bootloader file
UnlockBL.zip
Click to expand...
Click to collapse
https://goo.gl/nVq9e7
i have installed new firmware on my zenfone laser 2 (ze500kl),but when restarts it says error cant load invalid boot image...then i fastbooted boot.img..but when i restarts the phone it again shows the errror...
pls help me..
christin7 said:
i have installed new firmware on my zenfone laser 2 (ze500kl),but when restarts it says error cant load invalid boot image...then i fastbooted boot.img..but when i restarts the phone it again shows the errror...
pls help me..
Click to expand...
Click to collapse
Test:
Try to flash boot.img of your firmware version from fastboot mode but use command: fastboot boot boot.img. Reboot system. Then let me know.
as you guys know June update killed a lot of athenes and same thing happened with my athene. and the BlankFlash is also not working after this update. so is there any update for blankFlash, post a link here.
no updated blankflash ... we should wait la
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
siddhesh9146 said:
as you guys know June update killed a lot of athenes and same thing happened with my athene. and the BlankFlash is also not working after this update. so is there any update for blankFlash, post a link here.
Click to expand...
Click to collapse
sad..... my athne toooooo dead .... we should hope get updated soon... most of moto g4 plus athene dead ...... i dont who gonna make new updated blankflash to recover....... thanks in advance who make new one..... or any other solution... already a post is here but it didnot work out at allll..... pls someone geeks solve this
...... ISSUES LOTS OF MOTO G4 PLUS DEADDD..... EVERYTHING TRIED NO LUCK[ATHENE]XT1643]:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
tamil2692 said:
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
sad..... my athne toooooo dead .... we should hope get updated soon... most of moto g4 plus athene dead ...... i dont who gonna make new updated blankflash to recover....... thanks in advance who make new one..... or any other solution... already a post is here but it didnot work out at allll..... pls someone geeks solve this
...... ISSUES LOTS OF MOTO G4 PLUS DEADDD..... EVERYTHING TRIED NO LUCK[ATHENE]XT1643]:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Nothin
new blankflash HERE : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Does not enter recovery or boot up system
as soon as the blankflash file is updated i flashed it and worked
then i flashed updated gpt and bootloader
then i tried to enter recovery mode but its not entering
and also when i unplug usb cable it is turning off
then i flashed stock rom
but still recovery and system booting are not working,enters only to fastboot that too on charging.
guyss please help me it means a lot to me.Thanks in advance
Geek_manoj said:
as soon as the blankflash file is updated i flashed it and worked
then i flashed updated gpt and bootloader
then i tried to enter recovery mode but its not entering
and also when i unplug usb cable it is turning off
then i flashed stock rom
but still recovery and system booting are not working,enters only to fastboot that too on charging.
guyss please help me it means a lot to me.Thanks in advance
Click to expand...
Click to collapse
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?
echo92 said:
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?
Click to expand...
Click to collapse
he didn't flashed stock rom yet, he is only trying to flash custom roms zips from recovery. someone please him that this won't work in this case:cyclops:
Blank Flash Files Moto G4 Plus
Yes I have the correct blank flash files for Moto G4 Plus. I was used it on my device XT1643 and it is working.
echo92 said:
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?
Click to expand...
Click to collapse
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
siddhesh9146 said:
he didn't flashed stock rom yet, he is only trying to flash custom roms zips from recovery. someone please him that this won't work in this case:cyclops:
Click to expand...
Click to collapse
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance
Geek_manoj said:
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance
Click to expand...
Click to collapse
I knew that, that file was for flashing in fastboot mode
but you flashed in recovery
Geek_manoj said:
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance
Click to expand...
Click to collapse
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.
echo92 said:
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.
Click to expand...
Click to collapse
I m sorry.I must have described in a better way.I actually mean that i used computer extracted the firmware and then i ran oem_flash,which is the actual way i suppouse in fastboot mode(i ommited for fastboot as stock recovery in previous post,sorry).but i dont know why it still doesnt enter recovery or enter into system or work without plug.i even tried flashing updated gpt.bin and bootloader files again followed by the rom,but noting happened
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
echo92 said:
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.
Click to expand...
Click to collapse
siddhesh9146 said:
I knew that, that file was for flashing in fastboot mode
but you flashed in recovery
Click to expand...
Click to collapse
hey,i ommited in the post telling that i did it in recovery(sorry for that)actually it doesnt enter recovery,which i already mentioned.thanks for being concerned
Geek_manoj said:
I m sorry.I must have described in a better way.I actually mean that i used computer extracted the firmware and then i ran oem_flash,which is the actual way i suppouse in fastboot mode(i ommited for fastboot as stock recovery in previous post,sorry).but i dont know why it still doesnt enter recovery or enter into system or work without plug.i even tried flashing updated gpt.bin and bootloader files again followed by the rom,but noting happened
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
hey,i ommited in the post telling that i did it in recovery(sorry for that)actually it doesnt enter recovery,which i already mentioned.thanks for being concerned
Click to expand...
Click to collapse
So, you booted your device to the bootloader screen (not to recovery), connected your device to your computer, and you've flashed using the OEM_flash script, and yet you're unable to reboot to recovery?
Sounds like your stock ROM flash did not work the first time, leaving you without a recovery or a system. Try the following just to confirm:
1) Ensure your adb folder contains the extracted NPJS25.93-14-8 stock ROM (all the files), should be about 2 GB for the stock ROM. Also confirm that the OEM flash script is in the same location (so your adb folder should have the stock ROM, the flash script and the adb and fastboot.exe and adb.dlls)
2)Reboot your device to the bootloader (power down, then press the power and volume down keys to boot to bootloader) and connect your device to your computer.
3)In the adb terminal, type 'fastboot devices', without the quotes. If communicating, you should see your device respond with its serial number.
4)If communicating, run the OEM flash script again.
5)If your device does not boot properly, then reboot to bootloader.
5a)Copy each of the commands from the script (you can open the script in a text editor) and paste them in the adb terminal window and run each one by pressing Enter on your keyboard. You should see the command report [OKAY] if it's flashed. Any errors, let us know, that might point more accurately to what might be going on.
As an aside, this is one of the reasons why downgrading isn't a good idea....
echo92 said:
So, you booted your device to the bootloader screen (not to recovery), connected your device to your computer, and you've flashed using the OEM_flash script, and yet you're unable to reboot to recovery?
Sounds like your stock ROM flash did not work the first time, leaving you without a recovery or a system. Try the following just to confirm:
1) Ensure your adb folder contains the extracted NPJS25.93-14-8 stock ROM (all the files), should be about 2 GB for the stock ROM. Also confirm that the OEM flash script is in the same location (so your adb folder should have the stock ROM, the flash script and the adb and fastboot.exe and adb.dlls)
2)Reboot your device to the bootloader (power down, then press the power and volume down keys to boot to bootloader) and connect your device to your computer.
3)In the adb terminal, type 'fastboot devices', without the quotes. If communicating, you should see your device respond with its serial number.
4)If communicating, run the OEM flash script again.
5)If your device does not boot properly, then reboot to bootloader.
5a)Copy each of the commands from the script (you can open the script in a text editor) and paste them in the adb terminal window and run each one by pressing Enter on your keyboard. You should see the command report [OKAY] if it's flashed. Any errors, let us know, that might point more accurately to what might be going on.
As an aside, this is one of the reasons why downgrading isn't a good idea....
Click to expand...
Click to collapse
Hey,thanks for bothering.But,it didnt work.i have got no error.But still mobile enters only fastboot that too when charging( only fastboot again).
I tried to clear cache memory by booting my g4 plus in recovery mode. the phone hanged up and switched off now unable to boot. tried the blank flash file to update but the same is not working. Can any one help !!
Few days ago i decide to install GCAM on my mi a1 with magisk and a patched boot...evrything is working fine but when i unistall magisk phone still rebooting many times and wifi doesnt work.
I tried to boot the original boot.img , then i flash oreo stock in many different version but nothing to do.
At this point wrongly i try to click on flash factory. bat file but i dont know if the code is work correct because the command prompt is closing in a bit.
Now i read that this file corrupt and delete the IMEI...
Only solution for me is the edl because in another try i lock bootloader and then i cant unlock, i dont know why, by fastboot command.
Then i open my phone e try edl method....my device is recognized but after few attemps to flash many stock rom from the first to the last nothing change...
my device still black with blinking led, evry buttons do not respond.
WHAT CAN I DO??? I NEED YOUR HELP
Just download latest firmware or any old and flash it in fastboot
---------- Post added at 06:09 PM ---------- Previous post was at 06:09 PM ----------
Booting in fastboot?
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
kevinperdichizzi said:
Few days ago i decide to install GCAM on my mi a1 with magisk and a patched boot...evrything is working fine but when i unistall magisk phone still rebooting many times and wifi doesnt work.
I tried to boot the original boot.img , then i flash oreo stock in many different version but nothing to do.
At this point wrongly i try to click on flash factory. bat file but i dont know if the code is work correct because the command prompt is closing in a bit.
Now i read that this file corrupt and delete the IMEI...
Only solution for me is the edl because in another try i lock bootloader and then i cant unlock, i dont know why, by fastboot command.
Then i open my phone e try edl method....my device is recognized but after few attemps to flash many stock rom from the first to the last nothing change...
my device still black with blinking led, evry buttons do not respond.
WHAT CAN I DO??? I NEED YOUR HELP
Click to expand...
Click to collapse
First download oreo firmware and boot into fastboot mode
The open cmd and hit
Fastboot oem unlock
Then open xiaomiflash software and flash it.
Note: don't lock your bootloader again when you have Installed any custom thing
hamzaag49 said:
Just download latest firmware or any old and flash it in fastboot
---------- Post added at 06:09 PM ---------- Previous post was at 06:09 PM ----------
Booting in fastboot?
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
First download oreo firmware and boot into fastboot mode
The open cmd and hit
Fastboot oem unlock
Then open xiaomiflash software and flash it.
Note: don't lock your bootloader again when you have Installed any custom thing
Click to expand...
Click to collapse
I previously tried flash in fastbooot with evry stock release from nutgat to oreo and doesnt work. this before i go in edl.
now in edl is the same , flash is succesful but nothings happen screen still black led blinking and i cant go fastboot
kevinperdichizzi said:
I previously tried flash in fastbooot with evry stock release from nutgat to oreo and doesnt work. this before i go in edl.
now in edl is the same , flash is succesful but nothings happen screen still black led blinking and i cant go fastboot
Click to expand...
Click to collapse
I have exactly the same problem tried everything but still no solution. Bad thing is that there is no service center in my country.
daveve said:
I have exactly the same problem tried everything but still no solution. Bad thing is that there is no service center in my country.
Click to expand...
Click to collapse
Me too. i'm freaking out because i think that the only solutions is change the mainboard, and no xioami centre for doing that but only an autorized .