Database Users

os not installed fix !!

can someone help me please, i have tried to install cm13, and i did a clean wipe, now it is saying no os installed, and i couldnt even find the restore package !!! how can i load os into my oneplus two, as yo all knw we dont have a external memory card, am nt sure how to load os into phone now !!! some please help !!

devveda said:
can someone help me please, i have tried to install cm13, and i did a clean wipe, now it is saying no os installed, and i couldnt even find the restore package !!! how can i load os into my oneplus two, as yo all knw we dont have a external memory card, am nt sure how to load os into phone now !!! some please help !!
Click to expand...
Click to collapse
Are you on TWRP 3.0.x.x?
If yes, then go to Mount Section, enable MTP.
Connect to your PC, transfer desired ROM.zip and flash.
If no TWRP, then reboot to BootLoader/Fastboot
Download latest TWRP from official website, then flash it using command:
fastboot flash recovery twrp.img
fastboot reboot (keep holding vol- to enter TWRP)
where "twrp.img" is name of the recovery file.

WhyOrean said:
Are you on TWRP 3.0.x.x?
If yes, then go to Mount Section, enable MTP.
Connect to your PC, transfer desired ROM.zip and flash.
If no TWRP, then reboot to BootLoader/Fastboot
Download latest TWRP from official website, then flash it using command:
fastboot flash recovery twrp.img
fastboot reboot (keep holding vol- to enter TWRP)
where "twrp.img" is name of the recovery file.
Click to expand...
Click to collapse
yes i tried to enable mtp, but nothing was shown in computer to transfer !!!

thank god used sideload and installed stock rom, its fine and all set nw !!!!

devveda said:
yes i tried to enable mtp, but nothing was shown in computer to transfer !!!
Click to expand...
Click to collapse
Try with Latest TWRP build.
And at worst case scenario use Qualcomm Recovery Tool to go back to OOS 2.1.1, as already you have lost all your data.
---------- Post added at 12:19 PM ---------- Previous post was at 12:18 PM ----------
devveda said:
thank god used sideload and installed stock rom, its fine and all set nw !!!!
Click to expand...
Click to collapse
Oki Good, Enjoy!

Can you help me with something? When I again try to reboot my device in recovery I couldn't find the twrp recovery or any type of recovery, after installing the twrp, it's not rebooting, am getting a message saying "booting.... Failed <remote: dth not found>, I couldn't install twrp recovery can u help me with this?

OP2 stuck in bootloop on upgrading 3.0.2 .. even after trying tons of things

First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out

Sahaj4 said:
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Click to expand...
Click to collapse
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk

Jyoti_re said:
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Click to expand...
Click to collapse
Heyy.. Thanks a lot Jyoti_re! It worked out perfectly..
I have done till step 3.. The phone booted into 3.0.2
The sensors are not working. I will flash the presist.img as you said in step 4
However, i have encountered a problem. My OP2 is a 64 GB version. But now the internal storage shows 7gb free out of 9.66 GB.. Earlier it used to show 54GB instead of 9.66..
What should i do?
Thanks again

Yes u must have to flash persist.img via firstboot mode by typing [ fastboot flash persist ] for sensor correctly working.
Install es file explorar from play store and check which folder taking More space
don't forget to press thanks if I helped u.

Thanks a lot Jyoti! /
Yeah i got it.. Flashed the persist img.
i searched through the forums.. somehow my device got the 16gb version img.. i dont know how..
i had to flash userdata64G.img as well
Now it all works perfectly.. sensors are working.. data storage is back at 54gb..
Thanks a lot! I had been stuck on this bootloop since 3 days..
and i pressed the thanks button.. i will press it 100 times over if possible Thanks again! Cheers!

Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!

Sahaj4 said:
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Click to expand...
Click to collapse
Flash this SuperSU
https://drive.google.com/file/d/0B0OiN2evbEPuZk1KSk1hYUpEazA/view?usp=drivesdk
don't forget to press thanks if I helped u.

OP2 stuck in bootloop on upgrading from 2.0.2 to 3.0.2
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...

ciroportugues said:
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
Click to expand...
Click to collapse
Have u enabled OEM unlocking in developer option ??

No i forgot to enable...

No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
Jyoti_re said:
Have u enabled OEM unlocking in developer option ??
Click to expand...
Click to collapse
No iforgot to enable...
What can i do now?

ciroportugues said:
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
No iforgot to enable...
What can i do now?
Click to expand...
Click to collapse
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Jyoti_re said:
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.

ciroportugues said:
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
Click to expand...
Click to collapse
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.

ciroportugues said:
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
Click to expand...
Click to collapse
What does the Device Manager show when you connect your phone? By what name is it identified?

Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
---------- Post added at 10:06 PM ---------- Previous post was at 09:37 PM ----------
Sahaj4 said:
What does the Device Manager show when you connect your phone? By what name is it identified?
Click to expand...
Click to collapse
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).

When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings

Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Sahaj4 said:
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Click to expand...
Click to collapse
Tried this commands but the sistem reboots and stucka on powered by android

ciroportugues said:
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Tried this commands but the sistem reboots and stucks on powered by android
Click to expand...
Click to collapse
Hi. want to know if you anymore command to help me? thanks for help

ciroportugues said:
Hi. want to know if you anymore command to help me? thanks for help
Click to expand...
Click to collapse
I don't know much.. only as much as i have tried..
try running the command
fastboot oem device-info
if your device is unlocked, you are lucky! then there are many options
but if your device is locked.. then as far as i know, msm tool is your only saviour
try using this guide to unbrick your phone
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Android 7.1.1 Doogee X5PRO

I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip

Hi, and thank you, I already had downloaded the BETA3 version from needROM.com but it seems this is updgraded
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?

I've been using beta4 (and beta3 previously) for months and quite like them. Also, since the original factory rom is filled with adaware, isn't as up-to-date with Android's security patches and doesn't pass SafetyNet, you're gaining a lot and not losing anything switching or rooting for that matter.
Though I still prefer magisk over rooting since it's more secure and more than enough for adaway.
juancarloscuba said:
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
Click to expand...
Click to collapse
You can but you don't have to. I had a problem flashing beta4 and twrp at one go but booting the phone once with just beta4 and then powering off and flashing twrp and\or rooting afterwards solved that.
Btw, the dev is developing gesture modules for the kernel (built-in beta4) and an app to go with them: http://getbest.ru/kernel_gesture.htm I didn't find the feature useful enough to keep around but it works as advertised and, once again, magisk was enough.
Overall, the rom is an absolute must as far as I'm concerned and I wouldn't be using this phone if it wasn't available. It would have been nice if the dev could keepup with android's patches better but seeing how he's doing a better job than doogee and for free I can't really complain.

Do the camera and fingerprint work?

Hi. I wish to give my really thanks to the developer of this rom.
It solve my problems:
Stock rom R16:
sim card WIND (IT) poor 4G/LTE reception
sim card VODAFONE (IT) no 4G/LTE reception
(tested switching 1-2, various city zones)
This Rom:
both full 4G/LTE reception!!
M.A.

Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?

****_ve said:
I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!

The Seeker said:
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
Click to expand...
Click to collapse
Hi.
My phone (X5pro) hasn't fingerprint reader.
The camera seems to work in normal way.
M.A.
P.S.: May be it depends by my phone, but sometimes touch is not reponsive; I have to push the power button ("stand-by") and push it again to have normal touch response.
---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------
Racxie said:
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
Click to expand...
Click to collapse
The flash guide you linked is the right guide.
What exact model of phone you have?
Does the scatter and other files are in the same folder? (unzipped, you know).
Does the flashtool give any error message with the 32bit version?
Regards
M.A.

I tried both the 32bit and 64 bit versions of this rom, it's pretty good for a beta. However I had a problem with the screen going dark while using it and once the screen inverted colours randomly. Has anyone else had this problem with this rom? I'm currently using the android 6 stock rom but would love to get 7.1.1 working perfectly.

installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
Flashed from ubuntu linux 16.04:
Download Only option (should I have choosen Firmware Upgrade?)
Scatter-loading File MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (should I have choosen MT6735M_Android_scatter.txt?)
I had the bootloader locked in development options (had it to be open?)
I also had USB debugging ON
Any tips?

xe7um said:
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
.....
Any tips?
Click to expand...
Click to collapse
Hi.
Now I'm at home.
Tomorrow morning, when I'll be at office I'll write down steps by steps I did.
(home... office..., reverse of natural manner, because I do all my mobile hobbies at lunch pause; at home PC is used by others )

Hello, here I am.
The follows are the steps, more or less, that I did.
(maybe you already did some of these)
1-Start from official R16 ROM
2- Developer option
#a. Enable USB debug​#b. Enable OEM unlock​
3- Security: allow unknown origin installation
4- Unlock bootloader
#a. Connect in fastboot, from ADB command mode:​type: adb reboot-bootloader ___ (Wait 1-3 second)​type: fastboot devices ___ (verify device is detected)​#b. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: yes​= unlocked: no​#c. unlock bootloader​type: fastboot oem unlock ___ and you get​-> start unlock flow​---> on screen appear:​vol UP=Yes; void warranty, clear ALL data​vol DWN=no; no unlock​Press Vol UP​#d. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: no​= unlocked: yes​#e. May be phone restart​
5- shut down phone ___ AND ___ get out battery
6- Flash phone with
MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt​as per normal way (You know this , after some trying...)​
7- WITHOUT starting phone, ___ Flash TWRP with
MT6735M_TWRPx32_scatter.txt (or the 64, according to the ROM you flashed)​
9- Put battery in ___ AND___ start in TWRP recovery
#a. hold Vol Up, press ON button until appear a micro menu, release buttons​#b. choose recovery with Vol Up and confirm with Vol Down​
10- in recovery, choose wipe, and on bottom of the screen slide for factory reset
11- on TWRP main, choose reboot, power off
12- get out battery for some seconds
13- get in battery and start up (It can take a lot, may be leave the phone connected to main)
This is what I did (if I remember all the single steps...)
Try and report to us.
M.A.

Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo

xe7um said:
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
Click to expand...
Click to collapse
Hummmm....
It seems won't go in recovery mode, I think.
Try this:
1- flash entire stock ROM
(may be take this ===http://www.doogee.cc/bbs/viewtopic.php?t=29=== just in case)
2- start phone normal, up to home screen (so the phone is as just brougt)
3- power off and try to enter stock Recovery
If it works (and your bootloader is unloked) then try this
Connect phone to PC in fastboot
and enter
fastboot devices (I do this each time, just in case PC don't detect phone)
fastboot boot recovery.img
where recovery.img is your TWRP
The phone should start in TWRP recovery
The fastboot boot recovery.img command
send recovery (kernel?) image to temp phone folder/ram
and boot from that.
It unaffect normal rom/recovery.
By this step, we check If your phone accept this TWRP and sort out some possible troubles.
M.A.

when doing 'fastboot boot TWRP-3.1.1-X5PROx32.img' I get:
USB transferring...
USB transmission OK
and doesn't reboot into recovery but it boots normally
since I'm doing this from stock kernel R16 I wonder whether it's 32 or 64 bits
However I've found recovery-twrp-3.2.0-git-20171204.img that boots!. But I don't have scatter file, only .img! This recovery is from Lineage 14.1, but since this custom ROM installs from TWRP there is no need of scatter file

I've found another TWRP that boots with fastboot boot img: the TWRP recovery for 6.0 in needrom. This one has a scatter file

xe7um said:
I've found another TWRP that boots with fastboot boot img: https://www.needrom.com/wp-content/uploads/2016/12/TWRP_DG_X5Pro.rar
Click to expand...
Click to collapse
I get this error:
Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
Click to expand...
Click to collapse
Can you please link it correctly so we can download it?

The Seeker said:
I get this error:
Can you please link it correctly so we can download it?
Click to expand...
Click to collapse
Hi.
You have to select the file direct from the Needrom site.
www.needrom.com
(up)categories-doogee
on the right, click: Serial X
again, on the right, click: X5pro
and select the TWRP you desire.
(second line, second from left)
(click on "TWRP DG X5Pro (977 dls)")
Regards
M.A.
P.S.: even the link is
https://www.needrom.com/server/download.php?name=/2016/12/TWRP_DG_X5Pro.rar
you have to download from the site.

I'll try all this at the weekend, but my two cents are that it won't work. At first attempt I flashed BETA4 with MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (so no need to enter recovery and wipe cache/Dalvik) with a bootloop result.
My guess is that there are different ROM versions of X5 pro, and newest are incompatible with SnowcatPDA 7.1.1 firmware. Will see in a few days...

As I was suspecting I get a bootloop after logo. Now the question is: Is there a stable custom ROM (7.1 or newer) that I could use daily instead of MM 6.0 (R16) stock ROM?

[GUIDE] Restore to complete stock and relock bootloader. Easiest step by step guide.

Hello friends,
After trying different roms and kernels there always comes a time when we wish to go back to complete stock for a smooth reliable experience. Here's a detailed step by step guide for this process.
This guide assumes that you are on a unlocked bootloader with TWRP recovery installed and want to revert to complete stock
This will erase all data on your phone. Hence first BACKUP!
Note : I am not responsible for any damage do this at your own risk.
Downloads
1) MINIMAL ADB & FASTBOOT : https://goo.gl/UbFXdA
2) STOCK OOS FILE : https://goo.gl/JAfS2F
3) Stock Recovery : https://goo.gl/2kmbB7
Pre Requisites : A windows computer with a decent internet connection
Oneplus 5T with atleast 50% battery charged
USB Cable
Brain:cyclops:
Steps :
1) Download and install minimal ADB & Fastboot.
2) Download OOS Stock Rom And Stock Recovery.
3) Connect your phone to the PC using the USB cable in file transfer mode.
4) Copy the rom zip and stock recovery image to your phone.
5) Go to settings>about>tap build number 7 times.
6) Go to settings>developer options>enable advanced reboot.
7) Press power button for 2 seconds>select reboot>select recovery>tap to reboot.
8) Once the phone boots into TWRP>wipe everything except internal storage.
9) Tap install and select the stock rom zip and then swipe to install.
10) Tap install>select install image>select stock recovery img>tap recovery>swipe to install
11) Tap reboot>select bootloader and reboot to bootloader.
12) Once in bootloader connect the phone to your pc and launch minimal adb & fastboot
13) type fastboot devices and ensure device is connected and serial number shows up
14) type fastboot oem lock in minimal adb and fastboot and hit enter.
15) use the volume keys on your phone to highlight yes and press power button to confirm
16) wait for 2 to 5 minutes and phone will bootup to a complete stock rom with stock recovery and a locked bootloader.
For everyones convinience I have made a step by step video guide please watch and subscribe if you liked it.
Hit thanks if i helped.​

Before this came out I tried the reversal process incorrectly by typing fastboot oem lock as the 1st step (I know it says above you need a brain). Now it seems there is no OS to boot to. I can boot to TWRP and fastboot but my computer doesn't see the storage. Is there a way to push the the rom zip and stock recovery image to your phone via adb? If so what are the commands?

vibrantliker said:
Before this came out I tried the reversal process incorrectly by typing fastboot oem lock as the 1st step (I know it says above you need a brain). Now it seems there is no OS to boot to. I can boot to TWRP and fastboot but my computer doesn't see the storage. Is there a way to push the the rom zip and stock recovery image to your phone via adb? If so what are the commands?
Click to expand...
Click to collapse
I believe you should be able to go into twrp, go to sideload mode. Then the command would be abd sideload filename.zip This should then push the rom to your phone and install it for you. It has been a while since I needed to do it, as now a days I mostly keep my phones stock and locked.

Stephen said:
I believe you should be able to go into twrp, go to sideload mode. Then the command would be abd sideload filename.zip This should then push the rom to your phone and install it for you. It has been a while since I needed to do it, as now a days I mostly keep my phones stock and locked.
Click to expand...
Click to collapse
Thanks but that doesn't seem to work.

Link for Stock Recovery is down. Please help

Nice guide but isn't step 10 unnecessary, since the stock ROM will overwrite TWRP with the stock recovery anyway?

Thanks for the info. My phone's been acting very flaky since I rooted it, so I'm curious to see if returning to stock will make it a little less annoying.

vibrantliker said:
Before this came out I tried the reversal process incorrectly by typing fastboot oem lock as the 1st step (I know it says above you need a brain). Now it seems there is no OS to boot to. I can boot to TWRP and fastboot but my computer doesn't see the storage. Is there a way to push the the rom zip and stock recovery image to your phone via adb? If so what are the commands?
Click to expand...
Click to collapse
unlock the bootloader
flash twrpagain
flash stock rom from twrp
flash stockrecovery image from twrp
reboot to bootloader
relock bootloader
reboot
you are good to go

inxx99 said:
Link for Stock Recovery is down. Please help
Click to expand...
Click to collapse
updated

Sisyphus306 said:
Thanks for the info. My phone's been acting very flaky since I rooted it, so I'm curious to see if returning to stock will make it a little less annoying.
Click to expand...
Click to collapse
definitely worth a shot

rickysidhu_ said:
Nice guide but isn't step 10 unnecessary, since the stock ROM will overwrite TWRP with the stock recovery anyway?
Click to expand...
Click to collapse
sometimes it doesnt and hence before we relock the bootloader its necessary to ensure we have the stock recovery hence the step.

hypergamer1231 said:
sometimes it doesnt and hence before we relock the bootloader its necessary to ensure we have the stock recovery hence the step.
Click to expand...
Click to collapse
Fair enough

hypergamer1231 said:
unlock the bootloader
flash twrpagain
flash stock rom from twrp
flash stockrecovery image from twrp
reboot to bootloader
relock bootloader
reboot
you are good to go
Click to expand...
Click to collapse
My problem is, although I still have TWRP and fast boot, I don't have an os at the moment and need to get one via adb somehow.
I've tried adb push but can't find in TWRP. My computer doesn't see my phones storage either.

vibrantliker said:
My problem is, although I still have TWRP and fast boot, I don't have an os at the moment and need to get one via adb somehow.
I've tried adb push but can't find in TWRP. My computer doesn't see my phones storage either.
Click to expand...
Click to collapse
Can you boot in fastboot

Yes
---------- Post added at 05:54 AM ---------- Previous post was at 05:53 AM ----------
hypergamer1231 said:
Can you boot in fastboot
Click to expand...
Click to collapse
Yes and TWRP

vibrantliker said:
Yes
---------- Post added at 05:54 AM ---------- Previous post was at 05:53 AM ----------
Yes and TWRP
Click to expand...
Click to collapse
Check pm

Thank you for this.
Sent from my LG-H815 using Tapatalk

Thank you so much for this. Is this oos file the most current os for the 5t?

Can someone turn this thread into a sticky?

goran_oh said:
Thank you for this.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Glad it helped
martinez5241 said:
Thank you so much for this. Is this oos file the most current os for the 5t?
Click to expand...
Click to collapse
Yes this is the latest OOS 4.7.2
Co.Tibi said:
Can someone turn this thread into a sticky?
Click to expand...
Click to collapse
Am sure the mods will soon. Thank you.

Android 11 + TWRP + Root + Safetynet OK

I just want to share my trials and tribulations...
I tested many things and I manage to have my Poco F2 on Android 11 with easy way to root and have a Safetynet OK
There are many ways to do it but i never found it in only one post...
Here's my TO-DO list to make it...
1 / Starting from the bottom, I flashed the latest global rom (FASTBOOT METHOD to make a clean phone)
V12.0.3.0.QJKMIXM (Android 10)
- activate the phone after boot then go back to Fastboot Mode
2/ Unlock Bootloader via Mi Unlock (Fastboot Mode)
- activate the phone after boot then go back to Fastboot Mode
3/ Install TWRP via Fastboot mode
TWRP-3.4.1B-0328-REDMI_K30PRO
(XXXX is the name of your TWRP file)
- fastboot flash recovery XXXX.img
- fastboot boot XXXX.img
- After flash and the first boot to recovery, "format data" (The one you have to type YES) and reboot into recovery
4/ Install Latest Xiaomi.eu Stable (Or Weekly maybe)
[V12.1.2.0.RJKCNXM][Android 11]
- Copy the rom on your phone (from recovery)
- Install rom
- Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE
- Reboot your device.
- If reboot to recovevy, then format data (again) and reboot system
- activate the phone after boot then start the phone to go to the desktop (google account, security,...)
5/ Root with Magisk Canary
- Reboot into recovery
- Flash Magisk-debug.zip then format cache
- Reboot till the phone ask for sim card code then restart
- Open magisk manager and check you on canary canal for update
- Root should be ok!!! (you can download the magisk zip from magisk manager then reflash it in recovery mode to be sure : i dit it lol)
Here, my safetynet was failed then my google pay didnt work
6/ For Safetynet, use MagiskHide Props (even if I don't use it cause i flashed persist.img from Official rom)
That's all from and for me
Hope it can help
PS : Maybe I have bugs but for the moment it's ok

Probably you loose possibilities to make fingerprint works again... I do the same things and now fingerprint doesn't work more, and there are no possibilities to make it works.

CarloBello said:
Probably you loose possibilities to make fingerprint works again... I do the same things and now fingerprint doesn't work more, and there are no possibilities to make it works.
Click to expand...
Click to collapse
Seems to not want to reset even after a fastboot flash rom
Maybe we need to find another persist.img file....
If you find a solution before me, tell me

Put your phone in EDL mode(install qualcomm driver) and flash fastboot rom via MiTool.
Persist.img not flash in fastboot or twrp method...only EDL
Sorry for bad English.

I try that to flash in edl mode but it not possible because Mi flash tools need authorized account, I whole day trying to flash rom in EDL mode without any luck..
---------- Post added at 10:21 PM ---------- Previous post was at 10:19 PM ----------
the last thing that I now trying is to flash China stable fastboot rom through EDL mode, because Fastboot and TWRP dont change Persist.img , only EDL mode,hope that China rom dont need authrorization

tze_vitamin said:
I try that to flash in edl mode but it not possible because Mi flash tools need authorized account, I whole day trying to flash rom in EDL mode without any luck..
---------- Post added at 10:21 PM ---------- Previous post was at 10:19 PM ----------
the last thing that I now trying is to flash China stable fastboot rom through EDL mode, because Fastboot and TWRP dont change Persist.img , only EDL mode,hope that China rom dont need authrorization
Click to expand...
Click to collapse
I am in the same case, after trying a lot of solutions, none have worked.
I prefer to wait for the arrival of orangefox than to open my device.

pennywise1985 said:
Put your phone in EDL mode(install qualcomm driver) and flash fastboot rom via MiTool.
Persist.img not flash in fastboot or twrp method...only EDL
Sorry for bad English.
Click to expand...
Click to collapse
NOSS8 said:
I am in the same case, after trying a lot of solutions, none have worked.
I prefer to wait for the arrival of orangefox than to open my device.
Click to expand...
Click to collapse
you think that orangefox will help?

tze_vitamin said:
you think that orangefox will help?
Click to expand...
Click to collapse
Maybe, I had sensors problem with my redmi note 7 and only orange fox was able to flash correctly the persist img.
Current twrp do not have access to this Partition, the result " FAILED remote: 'Partition is write protected".
I try this command with terminal "dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist" no error to report but not flash.
I try also to modify"rawprogram0.xml"in fasboot rom ,no error to report but no result.
https://ibb.co/QNx1Tz2

NOSS8 said:
Maybe, I had sensors problem with my redmi note 7 and only orange fox was able to flash correctly the persist img.
Current twrp do not have access to this Partition, the result " FAILED remote: 'Partition is write protected".
I try this command with terminal "dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist" no error to report but not flash.
I try also to modify"rawprogram0.xml"in fasboot rom ,no error to report but no result.
https://ibb.co/QNx1Tz2
Click to expand...
Click to collapse
I still searching for mi flash tools that allowed me to flash in edl mode

tze_vitamin said:
I still searching for mi flash tools that allowed me to flash in edl mode
Click to expand...
Click to collapse
I also tried in ELD mode and I have this error "cannot receive hello packet"...

NOSS8 said:
I also tried in ELD mode and I have this error "cannot receive hello packet"...
Click to expand...
Click to collapse
this is the closest that I get but with no luck..

For the safetynet on android 11, use magiskhide prop. Select Poco f2 pro + the option force basic key attestation. It works for me

tze_vitamin said:
I try that to flash in edl mode but it not possible because Mi flash tools need authorized account, I whole day trying to flash rom in EDL mode without any luck..
---------- Post added at 10:21 PM ---------- Previous post was at 10:19 PM ----------
the last thing that I now trying is to flash China stable fastboot rom through EDL mode, because Fastboot and TWRP dont change Persist.img , only EDL mode,hope that China rom dont need authrorization
Click to expand...
Click to collapse
Which rom does not ask for permission?

NOSS8 said:
Which rom does not ask for permission?
Click to expand...
Click to collapse
MUI 12.2 20.9.17 Beta android 11 !
You need to use the last magisk manager canary version.
The prompt works for me!

Domi14fr said:
MUI 12.2 20.9.17 Beta android 11 !
You need to use the last magisk manager canary version.
The prompt works for me!
Click to expand...
Click to collapse
What are you talking about?

I solved the problem !!!!!
go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint have a nice day

I GOT THE SOLUTION AND IT WORKS!!!!
-Go to the CIT menu by pressing : *#*#64663#*#*
-Press the 3 dot to go in "additionnal tools"
-Go to number 12 : "fod fingerprint calibration"
-Follow the instructions :
1 / Put a white paper on the FOD then click start and wait
2/ Put a black paper (or something black) on the FOD then press next and wait
3/ Enjoy

tze_vitamin said:
I solved the problem !!!!!
go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint have a nice day
Click to expand...
Click to collapse
yes it works thank you very much :good::good::good:

Domi14fr said:
For the safetynet on android 11, use magiskhide prop. Select Poco f2 pro + the option force basic key attestation. It works for me
Click to expand...
Click to collapse
I still get device not certified in google play and safety net still fails after doing this.

Is decrypt for PIN on TWRP available?
Heard only pattern lock can be decrypted.