Hello, I recently gotten the WCDMA Oppo Find 5 ( X909) And it came rooted. I flashed OmniRom and the prompt: "Touchscreen Firmware Update in Progress - Please Wait..." and remained for 2 hours. I figured the flashing process screwed up so i tried to enter bootloader and it didnt work. The OPPO logo just shows on the screen and will not boot into recovery or bootloader. Nor can I use fastboot or ADB. As far as i can tell there is no public recovery tool for the Find 5. Any suggestions?
If you could flash the ROM, then a recovery must be available.
Try to keep the power button more than 10 seconds.
This is then a soft reset.
After that you should be able to boot into recovery while holding volume minus an power at the same time.
1) Self-installing firmware Flyme 4.2.8.2 (A), get Root, put SuperSu
2) Download files yadi.sk/d/9J5jAFm6nMwu6
3) Run SuperSu, hide, but not close
4) sets MX4pro_RecoveryInstaller-v1.0 file and run it
5) You see 2 buttons, push the upper (provide Root)
6) There was a red button, push it and reboot your smartphone
7) When you turn on the smartphone "Black logo Meizu", requires a lot of time only press "volume up"
8) hits the recovery, select the language and then "Install zip" / "choose zip from / sdcard", select the firmware file and put.
9) After the phrase "Install from sdcard complete", restart your smartphone and enjoy firmware.
really works, no bugs?
really works, no bugs
After reboot miui lag and block... Impossible to use... I try to clear data and nothing continue lag
The phone sticks at the boot screen (Which is written "MI". Is there any suggestion?
How do you do with the back and menu button ?
good
thanks ! 太尿性了~
MIUI its useful
Just To Remind everybody before you go and brick you GOOD device, is that your B00tloader must be unlocked before doing this or else you really will be stuck at the logo boot screen forever. I personally have not tried this.
Hi guys,
Yesterday, I unlocked my Huawei P9 Lite with the given code from EMUI, then I installed TWRP (twrp-3.1.1-0-venus.img) and installed SuperSU. All went okay, i managed to delete useless system app, but I realized i did not pass Safetynet Check anymore (and since i'm a PoGo fan..), so I uninstalled SuperSU and tried with Magisk, same issue. I uninstalled both, and couldn't get back the clean safetynet check.
There, I tried to install a official ROM for VNS-L31 xxxx361, but I did it wrong and the whole thing crashed. Now i'm left with no OS, phone is bootlooping for ever. The only things I can access if TWRP and Fastboot mode. I tried to flash img from a huawei release, but i get this error that scare everyone i asked about : remote : sparse flash write failure.
I've no idea how to not trash my phone and go grab another one if I ever want to make a phone call again!
Please help!!
Kindly,
Antonin
I had similar problem but I had no recovery just eRecovery and fastboot (which didnt let me flash anything).
Download FULL rom from:
hwmt.ru/oth/HWFF/info/view.php?find_model=VNS
(sorry cant post links)
Make sure u choose right model and location.
Extract the update.app and put it on sdcard in folder named dload, insert that sdcard into the phone.
Boot to erecovery and shut down the phone from there, then turn on the phone with both volume buttons pressed and wait till the rom will be installed.
If you didnt success to boot with vol + and vol -, try to press power wait for vibration and quickly press both volume buttons and hold.
Last week I rooted my phone (with magisk) but wasn't really satisfied so I decided to unroot it. After unrooting I also decided to lock the bootloader. After locking the bootloader however my phone booted into recovery mode where I get 3 options; Download latest version and recovery / Reboot / Shutdown. When I reboot the phone it will get back to this menu and the same happens when I shut down and turn it off. When I choose the first option I get the ''Restore your system with WIFI'' menu. I can choose between Download and Recovery or go back. When I hit Download and recovery my phone will start connecting to the WIFI and after that it's ''Getting the package info from the server'', after about 10 seconds I get the error ''Getting package info failed''. This is where I'm lost, I basically can't do anything at this point because my phone will continue to boot into recovery mode and the package will keep on failing.
Is there any fix for this? Please help!
Hi everyone...
Two days ago, and a few hours after installing the 8.1 update, my mom's J7 touchscreen was unresponsive, including the power button. It ran out of battery, and after I restarted it this morning, it goes to recovery mode after it tries installing system update and the No command screen is displayed.
I've searched on the web for hours and hours for solutions but none of them have worked, most probably because it requires the phone to be connected to the PC, and my PC (Windows 10) isn't even seeing the phone via USB (can't use ODIN nor ADB). BTW, the debug option most probably wasn't turned on prior to soft brick.
Phone Info:
SM-J730G J730GDXS5BRK1
No root
Error on recovery screen (the SD card has been taken out):
======================================
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
# MANUAL MODE v1.0.0#
Successfully verified dmverity hash tree
=======================================
Additional info: As I've mentioned, the power button isn't responsive, so I press the volume down button to choose the recovery options. I've tried all recovery options except for:
Wipe data / factory reset, as the phone data isn't backed up (mom doesn't want to lose the personal data as much as possible)
Apply update from ADB
Apply update from SD card
All other options are looping back to the recovery screen after installing system update screen.
Lastly, in recovery, there's an option at the bottom that states "Lacking storage booting". I'm sure that would mean something to someone reading this that would help solve the issue.
An OS downgrade or same 8.1 fix is preferred, as long as the phone data is intact. Any and all help would be much appreciated.
Try "Emergency Software Recovery" feature in Samsung Smart Switch for PC.
It could be a hardware issue as well. Clean your USB charging port with a brush and a drop of alcohol. Then dry with a hair drier.
Good evening, have you tried installing the latest version of the firmware by odin?
If not, try this.
probably its touch stopped working after the update because it was not original (already it has been changed) or it can be other cases ..
if you still can not install the newest firmware downloaded from the sammobile site you can do the second procedure.
Such you will find in this same forum.
In it you use the pc miracle box application and downgrade to 7.1.
this is the title of the post.
follow all procedures.
and it will be all right.
Fix Touch does not work on Samsung J7 Pro (J730G, J730GM) when updating Android 8.1
https://forum.xda-developers.com/ga...ix-touch-samsung-j7-pro-j730g-j730gm-t3850177
PS: Putting it into download mode: Turn the device on by holding the volume down buttons + Home + Power
Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.
Marius.Banderas said:
Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.
Click to expand...
Click to collapse
Then when you get to step II open the twrp and go into settings and uncheck the prompt option to install supersu if it is checked. whenever you do something in twrp uncheck this option. I do not know if this will be your problem but this always happens to me, if not clear at the time of restart the cell phone is in the loop screen exactly because of this option.
Cloud1245 said:
Then when you get to step II open the twrp and go into settings and uncheck the prompt option to install supersu if it is checked. whenever you do something in twrp uncheck this option. I do not know if this will be your problem but this always happens to me, if not clear at the time of restart the cell phone is in the loop screen exactly because of this option.
Click to expand...
Click to collapse
Checked TWRP Settings and there's no option / tickbox for supersu. I think one thing that I'm doing wrong is that I'm formatting data in TWRP during the wipe process instead of just sliding it to restore factory settings. I will try again later today after work.
Also, one thing I've noticed after flashing TWRP is that I have to enter recovery mode twice - the first time, it goes to the No command error screen then goes to stock recovery. Only after a reboot in the stock recovery would the phone enter TWRP recovery.
Marius.Banderas said:
Checked TWRP Settings and there's no option / tickbox for supersu. I think one thing that I'm doing wrong is that I'm formatting data in TWRP during the wipe process instead of just sliding it to restore factory settings. I will try again later today after work.
Also, one thing I've noticed after flashing TWRP is that I have to enter recovery mode twice - the first time, it goes to the No command error screen then goes to stock recovery. Only after a reboot in the stock recovery would the phone enter TWRP recovery.
Click to expand...
Click to collapse
Just one more thing. In tutorials on how to install twrp. when you enter twrp the first thing you should do is format the data. then install the rmm state prenormal and bypass files and only then install magisk or a custom rom.
---------- Post added at 11:10 PM ---------- Previous post was at 11:05 PM ----------
Cloud1245 said:
Just one more thing. In tutorials on how to install twrp. when you enter twrp the first thing you should do is format the data. then install the rmm state prenormal and bypass files and only then install magisk or a custom rom.
Click to expand...
Click to collapse
https://youtu.be/UOACi_sUDQY
do only steps 1, 4, 5, 6, 7, and 8 of the video description.
Will be all right!
Marius.Banderas said:
Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.
Click to expand...
Click to collapse
Before trying to flash TWRP, first flash a full stock firmware and make sure your can at least boot all the way up to the main screen.
Once that works, only then try to flash any custom recovery or custom rom.
Same prob
I've just faced the same problem a few days after my update as well. Did you figure out how to get it back to normal? Thank you!
uz91 said:
I've just faced the same problem a few days after my update as well. Did you figure out how to get it back to normal? Thank you!
Click to expand...
Click to collapse
that is a drk error
you can modification the stock firmware with 7z program
1. open your stock firmware go to AP file
2. click rename than erase the (.md5)
3. extarct the file
4. find (system) file
5. make a (.tar) file with (7z) program with the that system file
6. flash
7. done