Database Users

Bricked Phone, no screen at all

Hi there,
my brother purchased a used Note 4 and made a software update, after that the phone died. Now nothing is working, no recovery mode, no download mode. The phone does not even vibrate while holding the buttons.
The phone is still recognized in the pc with Qualcomm HS-USB QDLoader 9008, also Miflash and QFil (the Qualcom Flash Image Loader) recognize the device but i am not able to go any further. Miflash tops because of error " end of file (EOF) Receiving hello packet" and QFil says:
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
bei QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
bei QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
I think i am using the wrong files or whatever, it would be GREAT if you could help me/send me the correct files or whatever.
THANKS

N910P HS-USB QDLoader 9008 question

Hello community,
Does anyone was able to flash prog_emmc_firehose_8936.mbn through QFIL to n910p?
I've tried several times since yesterday to unbrick the phone itself, but keep receiving next message:
PHP:
Start Download
Program Path:C:\Users\JHome\Desktop\samsung\8675_W00\prog_emmc_firehose_8936.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Seems the problem is in prog_emmc_firehose_8936.mbn
Please someone share necessary .mbn file id any.
Thanx,

me too
help me
Tks all

Qualcomm HS-USB QDloader 9008 HARD BRICK , how to fix?

Hi, i have G530FZ model, i tried this guide: www[dot]droidsavvy[dot]com/unbrick-qualcomm-mobiles/
using QFIL tool but i get this error:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
how can i fix it?
is there another method without jtag , ATF Box etc..?
Thanks

Sahara failed

Need help....
My asus zen selfie z00udb aka zd551kl dead phone after flashing...
Just connect qualcomm hs qloader 9008...
I try to flash via qfil but error by sahara failed...
Can u help me please...

Trying to root my ZTE ZMax Pro (Z981) from MetroPCS, keep getting stuck on Sahara error in the QFIL

Hi all,
I've been trying to root my ZTE phone for a couple of days now (using this guide: https://androidforums.com/threads/new-root-method-for-z981-zmax-pro.1284305/) but when I try to flash (?) using the QFIL, I keep getting this error:
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail: Sahara Fail:QSaharaServer Fail: Process fail
I've tried getting the most recent version of QFIL I could find, I've tried allowing unsigned drivers, I've tried finding a new programmer file, updating the Qualcomm drivers but I keep getting the same error.
I'm using QFIL 2.0.2.3 and the ZTE is running Android 6.0.1
If anyone could help me out that'd be greatly appreciated, and if there's a piece of info that I need to provide just reply and I'll edit it in.
Thanks in advance!